About the runtime repository?

Hi,
I'm confused by the runtime repository?
what was stored in the runtime repository when i deployed a map to a location?
i have two warehouse targets in my owb project.when i was deploying a map,a error occured.
following was the error description:
"Cannot deploy to the target location because it is owned by a different runtime platform."
the map is used to load data from one table in a target warehouse to a table in another target warehouse.
who can tell me the reason? thanks in advance!

Hi,
The runtime repository owns a set of targets. So for each target you can deploy only using the runtime repository that has this target schema registered to it.
It sounds like your target schema is therefore not managed by this runtime repository. You would have to register the target schema to this repository using the runtime assistant. Simply install a target into the existing target user.
Jean-Pierre

Similar Messages

  • Where is the runtime repository assistant???

    Hi all,
    I am working with the OBI SE.
    When I am deploying the objects I am getting an error because there is not a valid runtime repository. I found that I have to create the runtime schema with the runtime repository assistant but I don't find it in the menu.
    Someone knows if it is installed with OBISE? What do I have to do to create the runtime schema? or, it is already created with the installation?
    Many thanks in advance,
    Victor.

    The runtime repository is a part of OWB repository. It's not related to OBISE.
    So, I'm assuming your question regarding the Runtime Repository is related to Oracle Warehouse Builder.
    It seems like you've created the Design Rep, but did not created the runtime. This is not possible to achieve, unless you explicitly create like that.
    You should run the OWB Repository Assistant and choose the BASIC INSTALL option, if you are using OWB on the same box as the database server.
    Please, provide more details about your servers and software architecture, versions, os versions and releases.
    Best wishes,
    Marcos

  • Error while loading the runtime repository in transaction BSP_WD_CMPWB

    Hi! Experts,
    I am getting the error
    boldError while interpreting the runtime repsitory
    While I am in the transaction BSP_WD_CMPWB its giving this particular error.
    and while I am going to the WEB UI its throwing the error
    An exception has occured during program processing.
    I have followed the thread and deleted all the BSP aplliaction and the realted classes but still i am getting the same error..
    Please Suggestb at the earliest, I am really in trouble related to it
    Thanks,
    Mayank

    Hi Mayank
    I had already delete my enhancement set using SM34 -> BSPWDVC_CMP_EXT as mentioned. However, I didn't find any Z classes created using SE80 -> BSP application.
    I had wanted to enhance component BT130I_OPPT -> ItemDetails view but somehow the standard repository got deleted and now I hit this 'Error when interpreting the runtime repository' message whenever I tried to enhance the view.
    In addition, the customised fields I created using EEWB, which used to appear under context node BTADMINI, is no longer there.
    Are you able to help? I can send u screen shots if necessary.
    Thank you very much!

  • Error while loading the runtime repository via HTTP

    Hi Experts,
    I am trying to delete an enhancement and when I enter the component name and the enhancement set in BSP_WD_CMPWB. I get the following error when right click the enhanced view and select delete : Error while loading the runtime repository via HTTP. How do I delete this enhancement?
    Regards
    Abdullah Ismail.

    if for some reason the runtime repository is not coherent, you get an error each time you try to read it (and this is the case when you open a component using the transaction BSP_WD_CMPWB)
    this is because the XML file is interpreted by a CALL TRANSFORMATION statement, and any incorrect node will raise an uncaught exception
    solution:
    enhanced view is contained into BSP application you have created the first time you enhanced the component
    go to SE80 and enter the BSP application where your objects are stored (the name you provided the first time)
    there you can modify directly the objects, including the runtime repository which is stored under node "Pages with flow Logic"
    once the correction is done, you can access again your component through transaction BSP_WD_CMPWB (and delete it properly if this is what you want to do)

  • "Error when interpreting the runtime repository"  BSP Component workbench

    Hello,
    I have enhance the Component BP_HEAD_SEARCH under some enhancement set in my development system. After transporting all my changes to Quality system, when checking the same development in BSP_WD_CMPWB it is showing an error -- "Error when interpreting the runtime repository" for the same component and enhancement set.
    I have copied the repository.xml file from the development and again transported it to Quality system, even then the same error is coming.
    Could anyone please suggest how to remove it Quality system, the error is not coming in Development system.
    Regards,
    Shobhit Srivastava

    Hi Pankaj,
    Try as above said
    find the enhancement Z_* bsp application ,compare it with SAP bsp application.
    if the XML file lost,
    add the xml file toZ_* BSP application..
    If it doesnt work leave it as it is.It will not affect your system.In our system also there is a  same error .
    Have a nice time!!!!!!!!!

  • Error when interpreting the runtime repository Message no. BSP_WD_TOOLS030

    Hi All,
    I have created an enhancement for ICWC component ICCMP_BP_DETAIL.
    While trying to diplay this using trn BSP_WD_CMPWB , I am getting the message
    Error when interpreting the runtime repository Message no. BSP_WD_TOOLS030.
    What is the reason behind this? Also while testing this application the web page that
    opens up remains blank...
    Can anybody help me out with this?
    thanks
    Juhi Kulshreshtha

    Juhi,
    I meant Re: Error while loading the runtime repository in transaction BSP_WD_CMPWB
    check it out.
    Regards,
    Amar.

  • "Error when interpreting the runtime repository"  for IUICOBJD component

    Hello experts,
    I create an enhancement set for IUICOBJD component, and the systems return my the error:
    "Error when interpreting the runtime repository"
    Then in ICWEB, this enhancement affect to the view  connectionObject. And this view doesn't appear.
    Someone had some problems to create an enhancement set for IUICOBJD component ??
    Is necesary to make somenthing  with IUICOBJ component before to create the enhancement for IUICOBJD.
    Could you tell me the steps to solve this??
    Thanks in advance.
    Best regards.

    Hello Ismail, thanks for you help, I have tried to make this and the repository is the same code.
    Do you know if is necesary to make something special to create an enhancement for IUICOBJD component ?? make something first with IUICOBJ and then with IUICOBJD???
    I haven't any problems with other components for example with IUICMD the enhancement run ok.
    Thanks in advance.
    Best regards.

  • View YLOY102H_MSH/YSolCONconfMA is not defined in the runtime repository

    Hi Gurus,
    We have enhanced one LOY102H_MSH component and added various custome view in it.
    After 3-4 months there is a requirement in which I need to add on custom view in the same component.
    i added on custom view YSolCONconfMA  and at the time of creation I have added two context node (Membership and MAGenAtt). I have tired without context node as well but same error message is coming as mentioned below.
    Problem : 1 When I am double clicking and try to open the new created view it giving message "View              YLOY102H_MSH/YSolCONconfMA is not defined in the runtime repository that was loaded"
                   2. these two context nodes are not coming with the new created view.
    Any budy have have any idea.....
    Best Regards,
    Durga

    Hi Durga,
    You can cross check the created view in the YLOY102H_MSH. Check whether the context nodes are there
    under the view.
    In the used component, check in the repository if you have this interface view availabel under the
    component usages.
    Regards,
    Leon

  • View zview is not defined in  the runtime repository that was loaded.

    Hi,
    I created an enhancement for component BT111H_OPPT and created a view "ZVIEW" in it.When i clock on my ZVIEW i am getting the following message:
    view zview is not defined in  the runtime repository that was loaded.
    What does that imply?
    Isnt the view defined in the runtime repositry when we use the wizard to create it?
    Thanks in Advance.
    Regards
    Shilpi

    Hi Shilpi,
    Did you add your view into the Viewset/Window in Repository Browser ?
    Good Luck
    Eli Steklov
    Please Reward Points if it Helped

  • Message error "Define an assignment set in the runtime repository"

    Hello Experts,
    I'm creating a new component and when I'll assign the view created to be displayed in the screen the follow message appears "Define an assignment set in the runtime repository".
    Best regards,
    Caíque Escaler

    Hi,
    I am sure that when you Click on your view in component workbench, this message must be flashing up.
    Correct me if i am wrong.
    Now first thing is its not an error but an info message.
    There is nothing wrong in your developments. It just the fact that just creating a view does not mean we can use it. To use it, you must assign it to either a Window or a View Set or an Overview page in Runtime repository and thats why system tell you that you must do the view assignment.
    Go to the runtime repositoy and assign the view. Now whether it to be assigned to a viewset, overviewpage or window, depends upon your requirement. If your view is Assignement Block, you will attach it to an overviewpage . If its a separate edit/display view then you may attach it in existing viewset or Main Window.
    You can also create an empty window and attach your view to it..Ultimately view assignment completely depends upon what you want the view to be used as.
    Hope it solves your problem.
    Regards,
    Suchita

  • How to install the Runtime Repository for the first time

    Please let me know if I am correct...
    We need to run the OWB Runtime Assistant Tool from the database server where we are to install the Runtime Repository and also the user with which it needs to be created should have the SYSDBA privileges. We run the OWB Runtime Assistant tool and then follow the subsequent instructions.
    -Arnab

    The runtime repository was installed successfully, but I think we need to associate a target schema for the runtime repository as well where the deployable scripts will be kept.
    I am not understand the fact that the runtime repository should 'own' the target schema ?? what does this mean ???
    -Arnab Panja

  • Technical questions about the BO repository

    Hi to all,
    I order to understand how BO (talking about BO 3.0) act internally, I need to know the following questions:
    - What information is held in the repository database? Content or just metadata?
    - What is held in the properties blob of the bo_repos.cms_infoobjects6 table? 
    - What is held in the data blob of the bo_repos.cms_relations6 table?
    - Is there any possibility to change directly the UID of an object (eg: a universe) in the database directly? This action could be helpful to work with versions..
    Is there any technical documentation?
    Many thanks,
    Bea

    Hi Bea,
    I tested your case in my environment. After changing the definition of a key figure in my universe (this should be your development version), I renamed it (used the name of a universe on which I already had some reports running on) and tried to export  it in the BOBJ repository. The designer prompted me to select if I want to copy or move my universe. I choose to  create a copy of my universe and on the next step I was asked if I want to overwrite the universe with the same name (in your case this should be your production version). I confirmed overwriting the universe and started then my WebI reports (production reports) in the InfoView. Everything worked fine and the modification was visible.
    Please note that if during the development phase you remove/rename/change the visibility of universe objects (classes, dimensions, key figures), which are used in your existing WebI reports, then you will indeed may have problems. Even if you delete a class or object and add later a new one with the same name, there's no garantee that a WebI report which was using this object will work.
    Still if you just modify or add objects during the development or if you remove first the objects, which you want to delete, from your reports, then you should not have a problem with the approach we are discussing here.
    Regards,
    Stratos

  • Need details about the BI repository migration

    I have a requirement coming my way, although I am not working in Technology related to BI , my client insists me to do some BI repository migration.
    His requirement was that he has already done the cloning part of the DB, now all he wants is , the BI repository needs to be reproduced from the current server to another server.
    Kindly let me know any pointers for this BI repository migration.
    Thanks in advance.
    Regards,
    SID

    Hi,
    look if this is want you are looking for:
    http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/484161.htm
    Regards.
    Bruno Condemi

  • ORA-29521: when creating the runtime repository

    Hi, I am trying to install run time repository. It went upt0 89% and getting an error as below
    oracle.wh.util.DebugUtility: [processSPAWN]: A spawned program error. Exception
    = java.lang.Exception: Error : ORA-29521:
    referenced name oracle/wh/nas/msg/NAOptions could not be found
    Wed Jan 19 16:30:44 EST 2005
    oracle.wh.util.DebugUtility: [processSPAWN]: Get the error, stop processing...
    Wed Jan 19 16:31:06 EST 2005
    oracle.wh.util.DebugUtility: Assistant operation is unsuccessful ...
    please assist.
    thanks

    Sam,
    Your issue is most likely the same as described in the Metalink note 271909.1.
    The information in this article applies to:
    Oracle Warehouse Builder - Version: 9.2.0.2
    Oracle Server - Enterprise Edition - Version: 8.1.7
    This problem can occur on any platform.
    Errors
    ORA-29521 referenced name %s could not be found
    ORA-29534 referenced object %s.%s could not be resolved
    Symptoms
    ORA-29534 error, 'Referenced object .oracle/wh/runtime/xml/XMLLoadControllerFactory could not be resolved', when attempting to install the OWB target user in an Oracle 8.1.7 database.
    Cause
    Public synonyms for XML classes not setup
    Fix
    With the loadjava command, reload the xmltk.jar file in \owb\lib\int using the -force option
    ie.
    loadjava -verbose -force -thin -user runtime_owner/password@servername(HOST):database_listener_port:SID xmltk.jar
    loadjava -verbose -force -thin -user runtime_owner/password@HOST:1521:SID xmltk.jar
    Also, I saw the TAR logged for you on the same issue. in the future, please reference the TARs in your posts here, to help us resolve your issues faster.
    Nikolai Rochnik

  • Need details about the BI repository Merging

    Hi,
    I have a requirement of merging 2 repositories.
    some one help me for solving the issue,its urgent requirement for me...
    Thanks in Advance for any help
    Sree

    Hi,
    look if this is want you are looking for:
    http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/484161.htm
    Regards.
    Bruno Condemi

Maybe you are looking for