About XI SLD

Hi Experts,
I'm new to XI.please answer the below question? i need your help to under stand.
1.I have systems a, b and c ( external system) ,which are sends the data to XI,
Example:
system a sends idoc
system b sends idoc
system c send file
Here In XI SLD part how should i identified this idoc belongs to systems a or b like that ?
Thanks in advance,
daniwilliam

Hello
These questions are too basic for an Expert forum. Also they look suspiciously like exam/interview questions. Please use the search functionality to find answers to these basic questions.
Please familiarise yourself with the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] before opening any further threads.
This thread will be locked and any points awarded will be unassigned.
Regards
XI/PI Moderator.

Similar Messages

A quick question about WebDynpro SLD and R/3 with concurrent users

Hello ,
I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3 for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
- I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
Thanks Ubergeeks,
Guy

Hi Guy
You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
Regards
Pran

Settings SLD and JCO connection for Java Web Dynpro

Hi BI Gurus,
I'm a Business Intelligence newbye and I'm a bit confused about Web Dynpro configurations.
I try to execute, through Netweaver Developer Studio 7, a simple java Web Dynpro who call the standard Flight List BAPI.
My configuration is: NW 2004s installed on BI server (with java instance and j2EE Server) and Flight List BAPI stored on R/3 ECC. 5 System in another server.
Now, my doubt are:
1) in SLD Data Supplier (J2EE Visual Admin on BI Server) CIM configuration, what are the connections parameter necessary?The BI host or R/3 host?
2)if I set BW system parameters in SLD and in NWDS when I try to run my simple web dynpro an error occour This is the output:
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'WD_FLIGHTLIST_RFC_METADATA_DEST' in the SLD. No such JCO destination is defined in the SLD.
Correction Hints
Accessing the System Landsape Directory (SLD) failed. Depending on the concrete reason (see root cause) check the following:
is the SLD Supplier in the J2EE engine configured correctly? See the SLD documentation for more details about the SLD and about how to configure it.
are all JCO destinations maintained correctly? Use the preinstalled Web Dynpro Content Admin application to check/edit the destination. Use the Ping and Test functions of the Content Admin to verify that each destination is properly configured.
Additional information about the System Landscape Directory and the Web Dynpro Content Admin can be found in the SAP Developer Network (SDN) and in the Online Help for the SAP Web Application Server (installed with SAP NetWeaver Developer Studio and available online).
Note: the above hints are only a guess. They are automatically derived from the exception that occurred and therefore can't be guaranteed to address the original problem in all cases.
3)where can I create new JCO connections?What are the requirements settings?
I am always available for answers about the post!!
Help me please!!
Thanks thousand and sorry for my incorrect english!!

Andrea,
You can Create the JCo destination from Content Administrator. You must login as Administrator.
use the link as
http://<server>:<port>/webdynpro/welcome/Welcome.jsp, select Content Administator->Create JCo Destinations/Maintain JCo Destinations.
Please have a look on the following links regarding creating/maintaining JCo destinations. The are usally asked questions regarding JCo destinations.
Create JCo destinations:
/message/4947478#4947478 [original link is broken]
Creating JCO Destinations
/message/5369333#5369333 [original link is broken]
Rgs,
Dni

SLD Server can not start

Dear Experts, 
I need your help... 
 
I installed ABAP+Java stack (ECC6.0 and SAP J2EE Engine/7.00 PatchLevel 109886.44). 
When I view http://myserver01:50000/sld, I saw that the SLD server is stoped and I can not start it even I click "Start Sever button", system gave me error message "Failed to send start signal for complete cluster, SLD may still be stopped on other cluster nodes.". 
 
I checked the log in Administration tab, the log said: 
=========================================== 
#4 12/20/2009 19:40:06.390 [SAPEngine_Application_Thread[impl:3]_6] FATAL com.sap.lcr.start.StartDirector: SLD start failure, unable to activate the SLD CIMOM. Check the log of the persistence medium for any errors. If the error is reproducible, please send a message to SAP. More... 
#3 12/20/2009 19:40:06.375 [SAPEngine_Application_Thread[impl:3]_6] FATAL com.sap.lcr.objmgr.core.TransactionContainerChangeBuffer: Storing changes to cache failed. Please restart the application to reinitialize the cache.(Error: CIM_ERR_FAILED: Failed to initialize cluster notification sender.) More... 
#2 12/20/2009 19:40:06.375 [SAPEngine_Application_Thread[impl:3]_6] ERROR com.sap.lcr.cimsrv.ClusterNotificationSender$JMSSender: Failed to initialize cluster notification sender. Please check your JNDI service and JMS provider for errors. More... 
#1 12/20/2009 19:40:06.31 [SAPEngine_Application_Thread[impl:3]_6] FATAL com.sap.lcr.cimsrv.CIMOMServlet: SLD initialization failure, can not set up cluster-wide event notification. Please check your JMS provider for errors. More... 
#0 12/20/2009 19:40:06.31 [SAPEngine_Application_Thread[impl:3]_6] ERROR com.sap.lcr.cimsrv.ClusterNotificationListener: Failed to initialize cluster notification. Please check your JNDI service and JMS provider for errors. More... 
=========================================== 
 
Could any one tell me how to start up the SLD? 
More information: When I click Administration>details>Data, I saw: 
================== 
Nothing Available 
Model Version (sld/active): No model loaded 
SAP CR Content Version (sld/active): (SLD server stopped) 
================== 
But when I checked the location of E:\usr\sap\EC6\SYS\global\sld\model, I can see cimsap.zip and CR_Content.zip files there. 
 
 
 
Further more, I was a little bit confused about the SLD HTTP Port, that is during the installation parameter setting phase (SAP Sytem-> Central SLD), I choose SLD destination as "Register in existing central SLD(default)", and set SLD port to "8089", SLD Data Supplier User as "SLDDSUSER", but I can not find user "SLDDSUSER" in ABAP SU01, it's very strange. when I tried to view http://myserver01:8089/sld, it said "Page can not be found", could you tell me what's the difference between these two URL: Http://myserver01:8089/sld and http://myserver01:50000/sld? 
 
There are totally two questions(one problem and one question) of mine, any suggestions is welcome and it's surely that I will follow up and close this thread for the effective solutions.
 
Thank you very much in advance. 
 
Best regards, 
Nick 
 
Edited by: Li Nick on Dec 20, 2009 5:33 PM
Edited by: Li Nick on Dec 20, 2009 5:34 PM

Hi Nick,
1. Is SLD a pure java component that ABAP system should connect it through gateway port (JCo or something else..) and Java engine connect it directly with HTTP/HTTPS?
Above statment is right
2. So, the mechanism of Solution manager to manage all the systems is also based on SLD? Can we monitor all the system landscape without Solution manager, just SLD instead?
SLD is central repositoy to store system data present in landscape , Solution manager is used to monitor all the system using SLD also.
We can't montior system by just using SLD.
3. The functionality of the Visual Administrator->Cluster->Server->Services->SLD Data Supplier is to provide user inforamtion of the system that will be registered info. onto the SLD server, not configuring the SLD Server? (SLD is configured through Webpage port 50000 and to-be registered server is configured through Visual Administrator?
SLD Data Supplier is a area in As java system where you provide the information of existing SLD system ( the Exisiting SLD mean where SLD services is running )
SLD is purely java component
user SLDDSUSER belongs to the "TO-BE Registered" system, not the SLD server, am I understanding right?
SLDDSUSER belong to SLD server
so, the event of "Trigger SLD data transfer" is to send system information to the SLD Server
Yes.
Thanks
Anil

WebDynpro runtime demands on SLD (ESS)

Hello,
Can anyone point me to documentation discussing the runtime demands that broadly used applications like ESS make on SLD? I'd assume SLD is hit by JCO at startup but not repeatedly hit during runtime. Destinations are of course hit but what about the SLD itself. Do you have to figure in broadly used apps like ESS when determining SLD design?
Thanks,
Doug

Have u run the Backend Test Prog for the same ... Go to se38 ...
HRXSS_SER_RFW_TEST
any error's while running tat program ???
Regards
Todi

Logging onto the SLD

Hi from Australia All!
During the installation of Solution manager it asked us about a SLD, which we dont have, so I took the option to install one. It went for a quite a while and it seemed to work.
Except I cant log onto it via a web browser. I know the port and what the URL should be but everytime I try to log on I cant connect to it.
Infact I cant connect to the J2EE at all.
I have played with browser settings and still it wont work.
Again I am sure it will be something simple.
thanks in advance
Alex Tambellini

Thanks Teddy,
It is a double java and abap.
There is 2 new subsystems R3_00 which only has the following jobs: ENSERVERU
MSGSERVERU
SAPSTART
WATCHDOG
and R3_01 with the following jobs:
DISP_WORK
GWRD
ICMAN
MSG_SERVE
SAPSTART
WATCHDOG
WP00
WP01
WP02
WP03
WP04
WP05
WP06
WP07
WP08
WP09
WP10
WP11
WP12
WP13
In the QUSRWRK subsystem it has 2 jobs:
SAPSTRSRV
SAPSTRSRV
I cant find the job SERVER0.
When I try to connect the web browser comes back with cant find server error.
I hope that helps
Regards
Alex Tambellini

SLD and PI

Dear Gurus.
My question is about a role of SLD on PI work.
Does the PI need the SLD server available during runtime, not only at design phase?
For example PI using central SLD, or SLD running on another instance. In case that SLD is down - can I stop PI runtime?
Regards
Vladimir

Hi,
Dev, QA and Prod. are involved in flow of transport requests and this flow is enabled through a workflow process. Since all these flows towards Prod., hence it is clear that Prod. is the system where everything flows. However sometimes we also have the reverse flow (sometimes in case of idocs). So, considering the above scenario if we talk about master SLD, since we do not have any direct flow from dev. to Prod, or from Prod. to dev. hence the intermediate QA should be the master SLD since it directs flows towards various systems.
Regards,
Souvik

General questions about subscriptions in the context of application exports

Hello,
I have two sample applications (Apex 4.0.2), a "master" one and a "subscribed" one, which has a page template subscribed to a page template in the master app.
Looking at their export files, I see:
- Master app:
-- This is the master template
wwv_flow_api.create_template(
p_id=> 32173830131265449 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_name=> 'Two Level Tabs - Right Sidebar (optional / table-based)',- Subscribed app
-- This is the subscribed template
wwv_flow_api.create_template(
p_id=> 19843209078190645 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_name=> 'Two Level Tabs - Right Sidebar (optional / table-based)',
p_reference_id=> 32173830131265449,
p_translate_this_template => 'N',
p_template_comment => '');
end;A couple questions to help me understand how things work behind the scenes:
- Just out of interest, in the subscribed app export shouldn't it be p_reference_id=> 32173830131265449 + wwv_flow_api.g_id_offset to keep things in sync?
- If I export both applications from my workspace, delete them and re-import them (first the master, then the subscribed) the subscription remains valid. On the other hand, if I import them into apex.oracle.com, the subscription is lost. Is this the way it should be? Is there a way to keep the subscription?
Thanks
Luis

Hi Moni,
In case of business service you are only defining interfaces in integration directory. It can use more then one software component version. You need to transport content in sld only in such case when you have development, quality and production sld.
/wojciech
> Hi,
> When we use Business system, there will be
> corresponding Technical System, and associated
> Products and SWCV. So it is very clear Where to
> declare my SWCV in SLD. And no confusion about
> transporting SLD objects.
> But with Business service, It is not declared in
> SLD, So there is no related Technical System, no
> product. But I need to define SWCV so that i can
> import in to repository to define my design
> objects(DT,MT,MM etc).
> Here are my questions.
> 1. In which Product i need to define the SWCV?
it doesn't matter
> 2. Do i have to have a product associated with every
> SWCV?
actually all swcv should be in some product
> 3. Do i have to have a Technical system when i use
> Business service?
no
> 4. How do I transport SWCVs from dev SLD to TEST SLD,
> without Technical system and Business System?
I don't know.
> 5.Do i need to transport the SWCVs from dev SLD to
> test SLD as it working fine without doing SLD
> transport?
>
In my opinion you have to. But the best configuration is only one sld for whole landscape than you don't have to transport it.
> Thankx
> Moni
** Please reward points if found it useful **

Error while calling RFC

Hi all WebDynpro Gurus
I am using EP7.
I am developing an WD application for KM functionality in which I need to call RFC from backend. I followed the "Creating WD application accessing ABAP function" example.
But when I executed the application I got following exception.
Root Cause
The initial exception that caused the request to fail, was:
com.sap.lcr.api.cimclient.CIMClientException: java.net.MalformedURLException: URL must have a host part
Correction Hints
Accessing the System Landsape Directory (SLD) failed. Depending on the concrete reason (see root cause) check the following:
is the SLD Supplier in the J2EE engine configured correctly? See the SLD documentation for more details about the SLD and about how to configure it.
are all JCO destinations maintained correctly? Use the preinstalled Web Dynpro Content Admin application to check/edit the destination. Use the Ping and Test functions of the Content Admin to verify that each destination is properly configured.
I checked JcO connections in the webdynpro content admin. There the status is unknown and create tabs are disabled.
I checked the SLD connections in content admin , the entries are as below:
Host name : blank
Port: -1
User: blank
Url: http://.-1/sld
Where could i configure these SLD settings and what should be the new entries ?
I dont have permission to view WebDynpro console.
Please help me out.

Vinod,
Claim: "Hello, World" application with WD and RFC is the "Hello, World" application with most complex configuration.
Prove:
1. You need to run http://host:port/sld and import CIM context
2. You need to add technical WebAS ABAP systems to SLD (same URL)
3. You need to run Visual Administrator and setup SLD connection parameters (host, port, user, password)
4. You need to (re)deploy your WD application
5. You need to run web-based WebDynpro Content Administrator and configure JCO connections.
Fortunately, [1]-[4] is necessary only ones per server, [5] is necessary per every application.
Valery Silaev
SaM Solutions
http://www.sam-solutions.net
P.S. After I'd started working with XI I understood that procedure described above is not complex at all

Support desk queries on solution manager

Hi All
I have few queries on solution manager support desk functionality.
1.Is this the only way to create support desk message HELP-CREATE support desk Message from each individual system??
2.In our scenario,when we are creating the message we would like to assign component( it should be project specific component,not SAP specific component)...How to acieve this??
3.We have a requirement where the message has lot of status and fields and depending on the message processor I would like to control which status or field user should be able to view and work on...how to achieve this??
4.Need the way to send a message to the processor,as soon as his name appear as message processor.
5.I want to track all the persons involved in the message processing,how can I do this??
6.I want to use a different transaction type not the standard SLFN,so what configurations are needed??When I create a message it should automatically take properties of transaction type of newly created one??

Hello Dolores,
first of all thanks for that answer. I read it in the germany documentation help.
Here an extract:
+Anlegen von Support-Meldungen über NOTIF_CREATE
Mit der Transaktion NOTIF_CREATE können Benutzer, die in Satellitensystemen arbeiten, Meldungen anlegen und an den SAP Solution Manager versenden.
Vorgehensweise
Starten Sie Transaktion NOTIF_CREATE.
Geben Sie folgende Werte im Dialogfenster Anlegen einer Support Meldung ein:
Priorität
System/IBase-Komponente
Kurz- und Langtext
Um Anlagen anzuhängen, wählen Sie Registerkarte Anlagen.
Sichern Sie Ihre Eingaben.
Ergebnis
Sie haben eine Support-Meldung angelegt.+
Yesterday I search the internet for a note, but I didn't find one. So I'am happy now.
But now the next problem occurs. My next issue is about the SLD. The system cannot get the data from the satellites. I'am not sure, but I think our SLD isn't perfectly configuried. Do you have an "How To" or something like that?
regards
marc

SM 58 error while posting Idoc

Hi
I have installed a Netweaver XI 7.0 recently and have completed postinstallation tasks.
Communication between all XI components (i.e IR, ID and SLD is working.)
I am trying to test an Idoc to File scenario and while posting an Idoc from my R/3 system I am hitting upon this error "No service for system SAPD46, client 800 in Integration Directory".
I have scanned SDN forums and came across note 940313 which talks about the registration of R/3 system on SLD by one of the two methods as below..
Business system
Activities in the System Landscape Directory (SLD)(Create technical system):
      Create a technical system for system ABC in the SLD, and create the client for this. Do not forget to assign an "ALE logical system" (for example, "ABCCLNT123") to this technical system.
      SLD (Business system):
      You can now explicitly assign a business system to this client.
      For more details, refer to the SLD documentation.
      Activities in system ABC (self-registration in the SLD):
      Alternatively, you can register the system in the SLD in system ABC with Transaction RZ70. You will find detailed information about the SLD registration of systems on the SAP Service Marketplace for the "Exchange Infrastructure" in the document "Exchange_Installation_Guide.pdf".
      In system ABC, you can check your configuration with Transaction SLDCHECK.
      Activities in Integration Directory (import business system from SLD):
      You will find the business systems under Services Without Party in the Integration Services. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific identifiers".
      Use the Import/Update button to copy the data from the SLD, to create business systems, or to update their identifiers.
I have performed activities highlighted in BOLD. But still error is same.
My question from XI Gurus is that is there any way to know if the manual step of registering my R/3 system in SLD is sufficient (As the SLD bridge for my R/3 system is not configured and I can not use auto registartion.)
Is there any way to check if the R/3 system is successfully registered.
Thanx
Lovein
Edited by: Lovein Khullar on Sep 17, 2008 11:16 AM

Hi,
I think it is due to basis problem, at ID one of service is not working. Please check below mention link for configuration steps
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
Meanwhile check all authorization for IDOC processing, else can't process idoc in XI
For IDOC to FILE scenario follow below steps
1. Define Logical system through BD54 after that assign logical system to client through SCC4 window in R3 & XI systems
2. Define RFC destination through SM59 window in R3 & XI
3. Define Port & partner profile through WE21, WE20 windows
4. Trigger idoc from transaction code or test window through WE19.
5. In XI configure SLD under define Product, Component, Technical & business system, it should be WEB as ABAP type.
6. Import component from SLD to ID window meanwhile import idoc from R3
7. Define target structure according to ur requirement and map accordingly
8. Define ports IDX1 & IDX2 in XI
9. In ID define scenario under import business system and configure steps according to ur requirement. Here IDOC is sender so no need communication channel and sender agreement.
It will work without fail

Monitoring PI Integration Server in Solution Manager

I am trying to set up monitoring the PI Integration Server in Solution Manager. The issue I am having is assigning the auto-reaction methond in solution manager. I am unable to assign as it is not modifiable in Solution Manager. I am able to change in PI system, but do not want to do it there. Has anyone done this and can you guide me to steps/documentation ?

Hi Alexey,
everything you need to know is in the "SAP Solution Manager operations"
document under
http://service.sap.com/solutionmanager
-> Media library
-> Documentation
if you have problems with the communication between the SLD and the SolMan
check document SAP Solution Manager Landscape Setup Guide
under http://service.sap.com/diagnostics
-> Media Library
and note 1148028 - Setup SLD in the scope of Solution Manager 7.0
If you are curious about the SLD architecture in general you can also have a look at
http://service.sap.com/sld
regards, Javier

LookupException with PI 7.0 in HA Environment

Hi,
In one of our XSLT mappings we use a RFC LookupService to call an ABAP FM via an RFC Communication Channel. In our QA environment this works fine but it does not in our production environment where a LookupException is thrown.
In the Java API documentation for the com.sap.aii.mapping.lookup.LookupService
class I found the following "Note that you can only use channels which are located on the Integration Server (central adapters). Decentral adapters,adpapters which are not located on the Integration Server cannot be used. "
This makes me suspicious about the SLD registration of the AE...
A difference between our prod environment and test environment is that the prod env. is a HA environment with a ASCS instance and two dialog instances.
In the Integration Directory I have noticed in the prod environment that for the Communication Channels the drop down for Adapter Engine contains the value "af.pxi.sapxidb" versus "Integration Server" as in the test environment.
I have checked the SLD entries and associations according to note 764176 but I can't find anything obviously wrong.
In the RWB the AE is shown as a central AE under the Integration Server node in the Component Monitoring.
I'm most curious why the central AE shows as af.pxi.sapxidb in the integration directory, but any input is appreciated?
rgds Johan

Also note 1036727 is applied but no effect...
//Johan

No Service for System SAPECC(Sender Port), Client800(R/3 system client 800)

Hi friends,
I am new to XI/PI I am working with IDOC to Flat file scenario I am facing the folllowing error.
No Service for System SAPECC(Sender Port), Client800(R/3 system client 800) in integration Directory.
can any one tell what was the reason for this error.
Thanks in Advance,
Ravi Yasoda.

Hi Ravi,
Have you imported the Business System in Integration Directory?
Check whether you see the logical system name in adapter specific identifiers or not...
Also check from integration directory that cache notification was done and also check SXI_CACHE in the abap stack.
See this thread...
No service for system SAP***, client 001 in Integration Directory
Please go through below content from sap note for your issue...
Error message: No service for system SAPABC client 123 in the integration directory
Solution:
You send IDocs from system ABC to XI. In the control record of the IDoc,the SNDPOR field contains the value "SAPABC". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the
type (business-system/business-service):
Business system
-> Activities in the System Landscape Directory (SLD)(Create technical
system):
Create a technical system for system ABC in the SLD, and create the client for this. Do not forget to assign an "ALE logical system" (for example, "ABCCLNT123") to this technical system.
SLD (Business system):
You can now explicitly assign a business system to this client. For more details, refer to the SLD documentation.
Activities in system ABC (self-registration in the SLD):
Alternatively, you can register the system in the SLD in system ABC with Transaction RZ70. You will find detailed information about the SLD registration of systems on the SAP Service Marketplace for the
"Exchange Infrastructure" in the document "Exchange_Installation_Guide.pdf".
In system ABC, you can check your configuration with Transaction SLDCHECK.
Activities in Integration Directory (import business system from SLD):
You will find the business systems under Services Without Party in the Integration Services. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical
system under "Objects"->"Adapter-specific identifiers". Use the Import/Update button to copy the data from the SLD, to create business systems, or to update their identifiers.
Business service
-> Activities in the Integration Builder directory:
You want to create a service without party that is not part of your system infrastructure and is therefore not maintained in the SLD. In the Integration Builder directory, you will find the "Business-Services" under Services Without Party. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific
identifiers".
Activate the change list in Integration Directory.
In system ABC, you can restart the incorrect entry from Transaction SM58 .
Regds,
Pinangshuk.

Error in sender sap idoc side

Hi Experts,
            1, When the sender post idoc to PI it shows the following
              error in sender sap system.
               Error:No service for system SAPQ01 client 118 in integration directory
            2, Is it possible to post the idoc to PI With out activating the integ directory Object in PI(Integ.repoistery activated).
            3, If possible, where can i see the idoc datas in PI before activation.
Thanks

Hi Raja,
You send IDocs from system ABC to XI. In the control record of the IDoc,the SNDPOR field contains the value "SAPABC". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the
type (business-system/business-service):
Business system
-> Activities in the System Landscape Directory (SLD)(Create technical
system):
Create a technical system for system ABC in the SLD, and create the client for this. Do not forget to assign an "ALE logical system" (for example, "ABCCLNT123") to this technical system.
SLD (Business system):
You can now explicitly assign a business system to this client. For more details, refer to the SLD documentation.
Activities in system ABC (self-registration in the SLD):
Alternatively, you can register the system in the SLD in system ABC with Transaction RZ70. You will find detailed information about the SLD registration of systems on the SAP Service Marketplace for the
"Exchange Infrastructure" in the document "Exchange_Installation_Guide.pdf".
In system ABC, you can check your configuration with Transaction SLDCHECK.
Activities in Integration Directory (import business system from SLD):
You will find the business systems under Services Without Party in the Integration Services. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical
system under "Objects"->"Adapter-specific identifiers". Use the Import/Update button to copy the data from the SLD, to create business systems, or to update their identifiers.
Business service
-> Activities in the Integration Builder directory:
You want to create a service without party that is not part of your system infrastructure and is therefore not maintained in the SLD. In the Integration Builder directory, you will find the "Business-Services" under Services Without Party. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific
identifiers".
Activate the change list in Integration Directory.
In system ABC, you can restart the incorrect entry from Transaction SM58 .
Regds,
Pinangshuk.

About XI SLD

Similar Messages

Maybe you are looking for