Abs error: core.abs.tar.gz no such file or directory

I am trying to learn how to compile packages on Arch but I am getting a error when I try to run abs:
[root@anyhost ~] # abs
==> Downloading tarballs...
==> core...
tar (child): core.abs.tar.gz: Cannot open: No such file or directory
tar (child): Error is not recoverable. Exiting now.
tar: Child returned status 2
tar: Error is not recoverable exiting now
Any ideas?

I think the package format was changed from tar.gz to .xz a while back.Try to re-install abs and also use an updated mirror.

Similar Messages

Error: null/config/deploy.properties (No such file or directory)

Hi,
I installed Weblogic 10.3.5, SOA Suite 11.1.1.5 and the installed AIA 11.1.1.5. Install completes successfully and everything seems to be up and running for AIA in the Enterprise Manager but when I go to the following
http://hostname:8001/AIA
Login and click on the 'About AIA' on the top right hand corner I get the following error
Error: null/config/deploy.properties (No such file or directory)
I have re-installed and installed it in 3 environments with same results, so I am thinking I am missing a step somewhere. Any advice on how to fix this issue?
Thanks
Jaco

Hi Jaco,
This issue is fixed in AIA 11.1.1.6.0 version. Either upgrade your AIA version to 11.1.1.6.0 or apply RUP2(Patch#13247584) on AIA 11.1.1.5.0.
Regards
Siva Shankar
Tech Democracy

Compile error during make: ansidecl.h: No such file or directory

Hi - I was trying to make a ruby app and I ran into the following error which seems to have originated in gcc. I can't seem to find much about it on Google, would very much appreciate some help with how to get to the bottom of this, thanks!:
checking for main() in -liberty... no
creating Makefile
In file included from dirfibheap.h:5,
from dirfibheap.c:2:
*fibheap.h:44:22: error: ansidecl.h: No such file or directory*
make: * \[dirfibheap.o] Error 1
gcc -fno-common -g -Os -pipe -fno-common -pipe -fno-common -pipe -fno-common -I. -I/usr/lib/ruby/1.8/universal-darwin8.0 -I/usr/lib/ruby/1.8/universal-darwin8.0 -I. -c dirfibheap.c

Apple's gcc doesn't come with this file. It is unlikely that simply getting a version of the file will work. My guess is that you would have to either install an alternative version of gcc which includes it or edit the source code of the app you're compiling to avoid it. Whether either of these would work, I can't say. Obviously this application is not ported to or supported on Mac OS X (if it is meant to be, report the bug). That means there are likely other issues which will crop up if you sort this one. I don't say this to put you off but only as a warning. (This may be superfluous and you may know all this very well. If so, my apologies.)
What are you trying to compile? Have you tried the forums for the application? Has anybody else compiled it for OS X? Have you seen if Fink or Mac Ports have it?
- cfr

Rsync errors (no such file or directory)

I'm getting some errors during backup from rsync:
2012/07/02 00:31:48 [9085] rsync: stat "/mnt/IomegaHD/var/abs/community/sakura/.PKGBUILD.6LcDO6" failed: No such file or directory (2)
2012/07/02 00:31:48 [9085] rsync: rename "/mnt/IomegaHD/var/abs/community/sakura/.PKGBUILD.6LcDO6" -> "var/abs/community/sakura/PKGBUILD": No such file or directory (2)
2012/07/02 00:32:00 [9939] rsync: stat "/mnt/IomegaHD/var/abs/extra/gtkhtml/.PKGBUILD.QoY10x" failed: No such file or directory (2)
2012/07/02 00:32:00 [9939] rsync: rename "/mnt/IomegaHD/var/abs/extra/gtkhtml/.PKGBUILD.QoY10x" -> "var/abs/extra/gtkhtml/PKGBUILD": No such file or directory (2)
2012/07/02 00:32:05 [9085] rsync: stat "/mnt/IomegaHD/var/abs/extra/pygobject2/.PKGBUILD.6xaypk" failed: No such file or directory (2)
2012/07/02 00:32:05 [9085] rsync: rename "/mnt/IomegaHD/var/abs/extra/pygobject2/.PKGBUILD.6xaypk" -> "var/abs/extra/pygobject2/PKGBUILD": No such file or directory (2)
2012/07/02 00:33:44 [9939] rsync: stat "/mnt/IomegaHD/var/lib/pacman/local/kdeplasma-addons-applets-frame-4.8.4-2/.desc.4j32nU" failed: No such file or directory (2)
2012/07/02 00:33:44 [9939] rsync: rename "/mnt/IomegaHD/var/lib/pacman/local/kdeplasma-addons-applets-frame-4.8.4-2/.desc.4j32nU" -> "var/lib/pacman/local/kdeplasma-addons-applets-frame-4.8.4-2/desc": No such file or directory (2)
2012/07/02 00:34:08 [9085] rsync: stat "/mnt/IomegaHD/var/lib/pacman/local/xinetd-2.3.15-2/.files.zQAwn3" failed: No such file or directory (2)
2012/07/02 00:34:08 [9085] rsync: rename "/mnt/IomegaHD/var/lib/pacman/local/xinetd-2.3.15-2/.files.zQAwn3" -> "var/lib/pacman/local/xinetd-2.3.15-2/files": No such file or directory (2)
2012/07/02 00:34:29 [9939] rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1052) [sender=3.0.9]
2012/07/02 00:34:30 [9085] rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1052) [sender=3.0.9]
I don't know as much as I should about how rsync works but I'm not worried about these errors as such. The missing files/directories are not, after all, supposed to exist in the final backup. But I'm a bit worried about the fact that rsync seems to think they should be there for it to rename.
I assume these are temporary files and that e.g. rsync copies a file to a temporary name first, not overwriting an existing, albeit outdated version, before renaming the file after a successful copy. I guess this is for safety - if the copy goes wrong, at least the outdated version is still intact. If that's right, though, I'm not sure why it would still think the renaming needed to be redone...
All the errors I've found seem to occur for /var/lib/pacman/local but that's likely just coincidence. I checked and this directory is identical to the one on the backup so the files definitely are being updated correctly. Just for some reason rsync doesn't seem to know that.
Have I misconfigured rsync somehow? I'm basically using:
/usr/bin/rsync -aAXv --delete-excluded --exclude-from=$list --log-file=$logdir/$logfile "$srcdir/" "$destdir"
where the variables are set up correctly from another script.

I'm getting some errors during backup from rsync:
2012/07/02 00:31:48 [9085] rsync: stat "/mnt/IomegaHD/var/abs/community/sakura/.PKGBUILD.6LcDO6" failed: No such file or directory (2)
2012/07/02 00:31:48 [9085] rsync: rename "/mnt/IomegaHD/var/abs/community/sakura/.PKGBUILD.6LcDO6" -> "var/abs/community/sakura/PKGBUILD": No such file or directory (2)
2012/07/02 00:32:00 [9939] rsync: stat "/mnt/IomegaHD/var/abs/extra/gtkhtml/.PKGBUILD.QoY10x" failed: No such file or directory (2)
2012/07/02 00:32:00 [9939] rsync: rename "/mnt/IomegaHD/var/abs/extra/gtkhtml/.PKGBUILD.QoY10x" -> "var/abs/extra/gtkhtml/PKGBUILD": No such file or directory (2)
2012/07/02 00:32:05 [9085] rsync: stat "/mnt/IomegaHD/var/abs/extra/pygobject2/.PKGBUILD.6xaypk" failed: No such file or directory (2)
2012/07/02 00:32:05 [9085] rsync: rename "/mnt/IomegaHD/var/abs/extra/pygobject2/.PKGBUILD.6xaypk" -> "var/abs/extra/pygobject2/PKGBUILD": No such file or directory (2)
2012/07/02 00:33:44 [9939] rsync: stat "/mnt/IomegaHD/var/lib/pacman/local/kdeplasma-addons-applets-frame-4.8.4-2/.desc.4j32nU" failed: No such file or directory (2)
2012/07/02 00:33:44 [9939] rsync: rename "/mnt/IomegaHD/var/lib/pacman/local/kdeplasma-addons-applets-frame-4.8.4-2/.desc.4j32nU" -> "var/lib/pacman/local/kdeplasma-addons-applets-frame-4.8.4-2/desc": No such file or directory (2)
2012/07/02 00:34:08 [9085] rsync: stat "/mnt/IomegaHD/var/lib/pacman/local/xinetd-2.3.15-2/.files.zQAwn3" failed: No such file or directory (2)
2012/07/02 00:34:08 [9085] rsync: rename "/mnt/IomegaHD/var/lib/pacman/local/xinetd-2.3.15-2/.files.zQAwn3" -> "var/lib/pacman/local/xinetd-2.3.15-2/files": No such file or directory (2)
2012/07/02 00:34:29 [9939] rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1052) [sender=3.0.9]
2012/07/02 00:34:30 [9085] rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1052) [sender=3.0.9]
I don't know as much as I should about how rsync works but I'm not worried about these errors as such. The missing files/directories are not, after all, supposed to exist in the final backup. But I'm a bit worried about the fact that rsync seems to think they should be there for it to rename.
I assume these are temporary files and that e.g. rsync copies a file to a temporary name first, not overwriting an existing, albeit outdated version, before renaming the file after a successful copy. I guess this is for safety - if the copy goes wrong, at least the outdated version is still intact. If that's right, though, I'm not sure why it would still think the renaming needed to be redone...
All the errors I've found seem to occur for /var/lib/pacman/local but that's likely just coincidence. I checked and this directory is identical to the one on the backup so the files definitely are being updated correctly. Just for some reason rsync doesn't seem to know that.
Have I misconfigured rsync somehow? I'm basically using:
/usr/bin/rsync -aAXv --delete-excluded --exclude-from=$list --log-file=$logdir/$logfile "$srcdir/" "$destdir"
where the variables are set up correctly from another script.

Pooladm: cannot enable pools: No such file or directory

I'm having a problem enabling pools in Solaris 10. I used a core installation and manually installed the SUNWpool, SUNWpoolr, SUNWzoner, and SUNWzoneu packages.
When I try to execute "pooladm -e" to enable pools I get the following error:
pooladm: cannot enable pools: No such file or directory
Also, when I enable the svc:/system/pools:default service it errors into maintenance state with the same error in the log file.
I believe the problem is related to the non-existance of /dev/pool, but I'm not sure why it is not there.
Here is the output from truss:
bash-3.00# truss -f pooladm -e
2753:   execve("/usr/sbin/pooladm", 0xFFBFFC8C, 0xFFBFFC98) argc = 2
2753:   resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
2753:   resolvepath("/usr/sbin/pooladm", "/usr/sbin/pooladm", 1023) = 17
2753:   stat("/usr/sbin/pooladm", 0xFFBFFA68)           = 0
2753:   open("/var/ld/ld.config", O_RDONLY)             Err#2 ENOENT
2753:   stat("/lib/libpool.so.1", 0xFFBFF520)           Err#2 ENOENT
2753:   stat("/usr/lib/libpool.so.1", 0xFFBFF520)       = 0
2753:   resolvepath("/usr/lib/libpool.so.1", "/usr/lib/libpool.so.1", 1023) = 21
2753:   open("/usr/lib/libpool.so.1", O_RDONLY)         = 3
2753:   mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 172032, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF370000
2753:   mmap(0xFF370000, 93041, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF370000
2753:   mmap(0xFF398000, 7097, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 98304) = 0xFF398000
2753:   munmap(0xFF388000, 65536)                       = 0
2753:   memcntl(0xFF370000, 17100, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libc.so.1", 0xFFBFF520)              = 0
2753:   resolvepath("/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
2753:   open("/lib/libc.so.1", O_RDONLY)                = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 1015808, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF200000
2753:   mmap(0xFF200000, 909301, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF200000
2753:   mmap(0xFF2EE000, 32017, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 909312) = 0xFF2EE000
2753:   mmap(0xFF2F6000, 5984, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF2F6000
2753:   munmap(0xFF2DE000, 65536)                       = 0
2753:   memcntl(0xFF200000, 144128, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libxml2.so.2", 0xFFBFF520)           Err#2 ENOENT
2753:   stat("/usr/lib/libxml2.so.2", 0xFFBFF520)       = 0
2753:   resolvepath("/usr/lib/libxml2.so.2", "/usr/lib/libxml2.so.2", 1023) = 21
2753:   open("/usr/lib/libxml2.so.2", O_RDONLY)         = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 1540096, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF080000
2753:   mmap(0xFF080000, 1397070, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF080000
2753:   mmap(0xFF1E4000, 72885, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 1392640) = 0xFF1E4000
2753:   mmap(0xFF1F6000, 2168, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF1F6000
2753:   munmap(0xFF1D6000, 57344)                       = 0
2753:   mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF360000
2753:   memcntl(0xFF080000, 202876, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libscf.so.1", 0xFFBFF520)            = 0
2753:   resolvepath("/lib/libscf.so.1", "/lib/libscf.so.1", 1023) = 16
2753:   open("/lib/libscf.so.1", O_RDONLY)              = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 172032, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF330000
2753:   mmap(0xFF330000, 97095, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF330000
2753:   mmap(0xFF358000, 4934, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 98304) = 0xFF358000
2753:   munmap(0xFF348000, 65536)                       = 0
2753:   memcntl(0xFF330000, 20432, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libnvpair.so.1", 0xFFBFF520)         = 0
2753:   resolvepath("/lib/libnvpair.so.1", "/lib/libnvpair.so.1", 1023) = 19
2753:   open("/lib/libnvpair.so.1", O_RDONLY)           = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 98304, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF310000
2753:   mmap(0xFF310000, 24206, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF310000
2753:   mmap(0xFF326000, 1192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 24576) = 0xFF326000
2753:   munmap(0xFF316000, 65536)                       = 0
2753:   memcntl(0xFF310000, 7604, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libexacct.so.1", 0xFFBFF520)         Err#2 ENOENT
2753:   stat("/usr/lib/libexacct.so.1", 0xFFBFF520)     = 0
2753:   resolvepath("/usr/lib/libexacct.so.1", "/usr/lib/libexacct.so.1", 1023) = 23
2753:   open("/usr/lib/libexacct.so.1", O_RDONLY)       = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 90112, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF060000
2753:   mmap(0xFF060000, 15042, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF060000
2753:   mmap(0xFF074000, 888, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 16384) = 0xFF074000
2753:   munmap(0xFF064000, 65536)                       = 0
2753:   memcntl(0xFF060000, 3568, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libpthread.so.1", 0xFFBFF520)        = 0
2753:   resolvepath("/lib/libpthread.so.1", "/lib/libpthread.so.1", 1023) = 20
2753:   open("/lib/libpthread.so.1", O_RDONLY)          = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00002000, 16384, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF3EC000
2753:   mmap(0xFF3EC000, 12032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF3EC000
2753:   close(3)                                        = 0
2753:   stat("/lib/libz.so.1", 0xFFBFF520)              Err#2 ENOENT
2753:   stat("/usr/lib/libz.so.1", 0xFFBFF520)          = 0
2753:   resolvepath("/usr/lib/libz.so.1", "/usr/lib/libz.so.1", 1023) = 18
2753:   open("/usr/lib/libz.so.1", O_RDONLY)            = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 139264, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF030000
2753:   mmap(0xFF030000, 69442, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF030000
2753:   mmap(0xFF050000, 6012, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 65536) = 0xFF050000
2753:   munmap(0xFF042000, 57344)                       = 0
2753:   memcntl(0xFF030000, 5032, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libm.so.2", 0xFFBFF520)              = 0
2753:   resolvepath("/lib/libm.so.2", "/lib/libm.so.2", 1023) = 14
2753:   open("/lib/libm.so.2", O_RDONLY)                = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 786432, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEF00000
2753:   mmap(0xFEF00000, 693647, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEF00000
2753:   mmap(0xFEFB8000, 28592, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 688128) = 0xFEFB8000
2753:   munmap(0xFEFAA000, 57344)                       = 0
2753:   memcntl(0xFEF00000, 33076, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libsocket.so.1", 0xFFBFF520)         = 0
2753:   resolvepath("/lib/libsocket.so.1", "/lib/libsocket.so.1", 1023) = 19
2753:   open("/lib/libsocket.so.1", O_RDONLY)           = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 122880, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF000000
2753:   mmap(0xFF000000, 44594, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF000000
2753:   mmap(0xFF01C000, 4277, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 49152) = 0xFF01C000
2753:   munmap(0xFF00C000, 65536)                       = 0
2753:   memcntl(0xFF000000, 14320, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libnsl.so.1", 0xFFBFF520)            = 0
2753:   resolvepath("/lib/libnsl.so.1", "/lib/libnsl.so.1", 1023) = 16
2753:   open("/lib/libnsl.so.1", O_RDONLY)              = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 729088, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEE00000
2753:   mmap(0xFEE00000, 594942, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEE00000
2753:   mmap(0xFEEA2000, 33745, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 598016) = 0xFEEA2000
2753:   mmap(0xFEEAC000, 23232, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFEEAC000
2753:   munmap(0xFEE92000, 65536)                       = 0
2753:   mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF300000
2753:   memcntl(0xFEE00000, 89508, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libdoor.so.1", 0xFFBFF520)           = 0
2753:   resolvepath("/lib/libdoor.so.1", "/lib/libdoor.so.1", 1023) = 17
2753:   open("/lib/libdoor.so.1", O_RDONLY)             = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 81920, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEFE0000
2753:   mmap(0xFEFE0000, 3315, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEFE0000
2753:   mmap(0xFEFF2000, 600, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 8192) = 0xFEFF2000
2753:   munmap(0xFEFE2000, 65536)                       = 0
2753:   memcntl(0xFEFE0000, 2240, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libuutil.so.1", 0xFFBFF520)          = 0
2753:   resolvepath("/lib/libuutil.so.1", "/lib/libuutil.so.1", 1023) = 18
2753:   open("/lib/libuutil.so.1", O_RDONLY)            = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 106496, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEEE0000
2753:   mmap(0xFEEE0000, 26032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEEE0000
2753:   mmap(0xFEEF8000, 1882, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 32768) = 0xFEEF8000
2753:   munmap(0xFEEE8000, 65536)                       = 0
2753:   memcntl(0xFEEE0000, 6652, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   stat("/lib/libgen.so.1", 0xFFBFF520)            = 0
2753:   resolvepath("/lib/libgen.so.1", "/lib/libgen.so.1", 1023) = 16
2753:   open("/lib/libgen.so.1", O_RDONLY)              = 3
2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753:   mmap(0x00010000, 98304, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEEC0000
2753:   mmap(0xFEEC0000, 22089, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEEC0000
2753:   mmap(0xFEED6000, 2303, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 24576) = 0xFEED6000
2753:   munmap(0xFEEC6000, 65536)                       = 0
2753:   memcntl(0xFEEC0000, 5656, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753:   close(3)                                        = 0
2753:   munmap(0xFF3A0000, 8192)                        = 0
2753:   mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEFD0000
2753:   getcontext(0xFFBFF758)
2753:   getrlimit(RLIMIT_STACK, 0xFFBFF738)             = 0
2753:   getpid()                                        = 2753 [2752]
2753:   setustack(0xFEFD2088)
2753:   sigfillset(0xFF2F64D8)                          = 0
2753:   stat("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", 0xFFBFF1B0) = 0
2753:   resolvepath("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", "/platform/sun4v/lib/libc_psr.so.1", 1023) = 33
2753:   open("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", O_RDONLY) = 3
2753:   mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFEDF0000
2753:   close(3)                                        = 0
2753:   brk(0x00022448)                                 = 0
2753:   brk(0x00024448)                                 = 0
2753:   getprivimplinfo(0xFFBFF2E0, 2076)               = 0
2753:   sysconfig(_CONFIG_NGROUPS)                      = 16
2753:   zone_lookup("")                                 = 0
2753:   zone_getattr(0, ZONE_ATTR_PRIVSET, 0xFEFD02C8, 12) = 12
2753:   getppriv(PRIV_EFFECTIVE, {ffffffffffffffffffffffff}) = 0
2753:   open64("/dev/pool", O_RDONLY)                   Err#2 ENOENT
2753:   fstat64(2, 0xFFBFEC88)                          = 0
pooladm2753:    write(2, " p o o l a d m", 7)                   = 7
: 2753: write(2, " : ", 2)                             = 2
cannot enable pools2753:        write(2, " c a n n o t   e n a b l".., 19)      = 19
: 2753: write(2, " : ", 2)                             = 2
No such file or directory2753: write(2, " N o   s u c h   f i l e".., 25)      = 25
2753:   write(2, "\n", 1)                               = 1
2753:   _exit(1)

All it took was running devfsadm and the errors were gone.

Rpmbuild fails with No such file or directory

Hi
OS Oracle Linux 6 Update 2 (64bit)
Linux 2.6.32-300.3.1.el6uek.x86_64
Following command fails
rpmbuild --rebuild virtualiron-4.5.16-11.src.rpm
error: File /root/rpmbuild/SOURCES/virtualiron-%{PACKAGE_VERSION}-11-src.tar.gz:
No such file or directory
Any ideas how to resolve this issue.

Moderator Action:
This thread has been moved from the Oracle Linux forum
to the Virtual Iron forum, for closer topic alignment.
You don't have a Linux issue.
You seem to have a V.I. issue that is perhaps all described in the V.I. documentation.

"No Such File or Directory" in Oracle Java Stored Procedure

The following code:
import java.io.*;
public class CWoodTest {
public static String go(){
String result = null;
File file = null;
try{
file = new File( "/data/oracle/cwoodACH.test" );
FileWriter fileWriter = new FileWriter( file );
fileWriter.write("Working");
fileWriter.close();
} catch( IOException e ){
if( file != null)
result = e.getMessage() + " " + file.toString();
else
result = e.getMessage() + " file null";
if( result != null ) return result;
else return "Working";
is published to PL/SQL as
CREATE OR REPLACE PACKAGE CWoodTest AS
FUNCTION go
RETURN VARCHAR2
AS LANGUAGE JAVA
NAME 'CWoodTest.go() return java.lang.String';
END CWoodTest;
show errors
And the result is "No Such File or Directory", even though the user oracle owns /data/oracle and the user I'm logged in as has JAVAUSERPRIV and JAVASYSPRIV . I am able to use UTL_FILE from PL/SQL to write to /data/oracle, so I know that init.ora has the correct UTL_FILE_DIR settings (if this matters). Similar Java code works fine on my desktop. Ideas?
Thanks in advance

Did you grant execute rights on your FUNCTION go?
No better idea atm.

Tar/write.c:49:28: error: ext2fs/ext2_fs.h: No such file or directory

Ok, I'm stuck. I'm trying to compile libarchive-1.3.1 ona a system and I get this error. I've tried this and that, but no luck ... anything obvious I need to install? Think there may be a broken symlink somewhere perhaps?
h-3.2# make
make all-am
make[1]: Entering directory `/media/cf/depends/libarchive-1.3.1'
if gcc -DHAVE_CONFIG_H -I. -I. -I. -I./libarchive -g -O2 -MT tar/bsdtar-write.o -MD -MP -MF "tar/.deps/bsdtar-write.Tpo" -c -o tar/bsdtar-write.o `test -f 'tar/write.c' || echo './'`tar/write.c; \
then mv -f "tar/.deps/bsdtar-write.Tpo" "tar/.deps/bsdtar-write.Po"; else rm -f "tar/.deps/bsdtar-write.Tpo"; exit 1; fi
tar/write.c:49:28: error: ext2fs/ext2_fs.h: No such file or directory
tar/write.c: In function 'write_hierarchy':
tar/write.c:599: error: 'EXT2_IOC_GETFLAGS' undeclared (first use in this function)
tar/write.c:599: error: (Each undeclared identifier is reported only once
tar/write.c:599: error: for each function it appears in.)
tar/write.c:601: error: 'EXT2_NODUMP_FL' undeclared (first use in this function)
tar/write.c: In function 'write_entry':
tar/write.c:742: error: 'EXT2_IOC_GETFLAGS' undeclared (first use in this function)
make[1]: *** [tar/bsdtar-write.o] Error 1
make[1]: Leaving directory `/media/cf/depends/libarchive-1.3.1'
make: *** [all] Error 2

I've looked into Oracle Database 10g Express Edition (Universal), a .deb file, found no occi.h but did find lots of .so files (linux shared libraries). I'll try and adapt my code and Netbeans/g++ to that and see if it works...
I can't really install it since my 4GB computer is x64 and my i386 "only" has 186RAM... Enterprise Linux Release 5 Media Pack for x86 64 (64 bit) is 5.1GB+updates (~5GB each)... Not gonna waste my time installing that just for a project.
I sense i'm missing something obvious... although there's nothing obvious about *.oracle.com... information company they say? ;)

Pacman Error: No such file or directory, please help

This morning I decided to make a package using the ABS and I noticed this error when executing Pacman.
error: /var/lib/pacman/local/pacman-2.9.8-1/desc: No such file or directory
Consequently, the custom package (Gaim Beta 4) kept complaining about dependancies, when I knew those packages were installed in the system. I did some searching around and it appeared that my local database may be currupted? At any rate, one of the posters suggested to forcefully reinstall the offending package, which I did. Upon doing so, it appeared that I had found a solution. However, after installing another package, the error appeared again. Repeating the process resolves the error, but only once before it occurs again.
Upon further searching, another poster suggested that I should remove the offending directory, and then reinstall the package. When I attempt to remove the directory, I get a kernel panic and my entire system freezes. Since there is so much output, I've take a photo of the error (X just freezes).
I apologise for the dodgy flash, but you can see the output. If anyone could offer any suggestions/assistance, I'd appreciate it.
Cheers,
Tate
EDIT: If it helps, I'm using the latest 2.6.18 stock Arch Kernel and LVM2 with ReiserFS.

try this:
cd /var/lib/pacman/local
mv pacman-2.9.8-1 pacman-2.9.8-1.old
pacman -Sf pacman
verify /var/lib/pacman/local/pacman-2.9.8-1 folder exists
verify that following files are in folder: depends, desc, files, install
verify pacman -Syu works
rm -rf /var/lib/pacman/local/pacman-2.9.8-1.old

Tar: *: Cannot stat: No such file or directory

everything except these lines is fine:
==> Removing info/doc files...
==> Compressing man pages...
==> Stripping debugging symbols from libraries...
==> Stripping symbols from binaries...
==> Generating .FILELIST file...
tar: *: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
==> Generating .PKGINFO file...
==> Compressing package...
tar: *: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
==> ERROR: Failed to create package file.

This indicates that $startdir/pkg is empty i.e. there are no files to add to the package tarball, so therefore no tarball is created. This in turn indicates that something is wrong with your PKGBUILD. If you want to post it here, people can have a look at it, and probably spot the error.

[SOLVED]fail to build package: no such file or directory error

EDIT1: read my last post
I'm getting an error while installing pacman-color from the aur repository. I'm still a newbie so my only guess is to make such directory? why should I have to do that? anyone help?
==> Validating source files with md5sums...
pacman-3.4.2.tar.gz ... Passed
pacman-color-3.4.2-1.patch ... Passed
color.conf ... Passed
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Starting build()...
/tmp/yaourt-tmp-root/aur-pacman-color/./PKGBUILD: line 21: cd: pacman-3.4.2: No such file or directory
Aborting...
==> ERROR: Makepkg was unable to build pacman-color.
Last edited by aluser (2011-01-21 04:48:16)

Here once again a failed attempt after removing pacman-color. I am beginning to think that maybe running yaourt as sudo is probably a bad idea. I think that may have had something to do with it.
archuser@archws ~ % sudo yaourt -S abiword-light <11:54>
Password:
==> Downloading abiword-light PKGBUILD from AUR...
x PKGBUILD
Comment by: mango on Thu, 25 Mar 2010 21:53:12 +0000
./configure --prefix=/usr \
--disable-spell \
--disable-print
Comment by: chessboxing on Wed, 19 May 2010 14:33:51 +0000
doesn't want to build
rule 23: make: command not found
== ERROR: Build Failed.
Aborting...
Eventhough I Had to install flex psiconv, it didn't help.
Its a minefield man.
Comment by: sHyLoCk on Wed, 02 Jun 2010 13:54:43 +0000
http://aur.archlinux.org/packages.php?ID=37738
Comment by: zenny on Thu, 02 Sep 2010 05:59:05 +0000
Quite confusing statements. Below sHyLoCk recommends http://aur.archlinux.org/packages.php?ID=37738 on June 2 2010 and on June 27 he declares his recommended package obsolet and ask a TU to delete! The problem with the sHyLoCk package is there is not page setup option. So I installed this package, it has got the page setup menu, but once I click the option, the application dies with the following output (Maybe helpful to debug for the maintainer, I am not an expert):
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_container_foreach: assertion `GTK_IS_CONTAINER (container)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_container_foreach: assertion `GTK_IS_CONTAINER (container)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_container_foreach: assertion `GTK_IS_CONTAINER (container)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_set_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): GLib-GObject-WARNING **: invalid (NULL) pointer instance
(abiword:32455): GLib-GObject-CRITICAL **: g_signal_connect_data: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_set_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_clear: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_pack_start: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_set_attributes: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_tree_model_get_iter_first: assertion `GTK_IS_TREE_MODEL (tree_model)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_set_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_clear: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_pack_start: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_set_attributes: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_tree_model_get_iter_first: assertion `GTK_IS_TREE_MODEL (tree_model)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_widget_get_colormap: assertion `GTK_IS_WIDGET (widget)' failed
(abiword:32455): Gdk-CRITICAL **: gdk_pixmap_colormap_create_from_xpm_d: assertion `drawable != NULL || colormap != NULL' failed
(abiword:32455): Gtk-CRITICAL **: gtk_image_set_from_pixmap: assertion `mask == NULL || GDK_IS_PIXMAP (mask)' failed
(abiword:32455): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(abiword:32455): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_box_pack: assertion `GTK_IS_BOX (box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_toggle_button_set_active: assertion `GTK_IS_TOGGLE_BUTTON (toggle_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_widget_get_colormap: assertion `GTK_IS_WIDGET (widget)' failed
(abiword:32455): Gdk-CRITICAL **: gdk_pixmap_colormap_create_from_xpm_d: assertion `drawable != NULL || colormap != NULL' failed
Aborted
First Submitted: Wed, 15 Apr 2009 17:01:46 +0000
abiword-light 2.8.6-2 : A fully-featured word processor without some gnome dependencies
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> abiword-light dependencies:
- fribidi>=0.10.9 (already installed)
- wv>=1.2.4 (already installed)
- libglade>=2.0 (already installed)
- pkgconfig (already installed)
==> Continue building abiword-light ? [Y/n]
==> ---------------------------------------
==>
==> Building and installing package
==> WARNING: Building package as root is dangerous.
Please run yaourt as a non-privileged user.
==> Making package: abiword-light 2.8.6-2 (Fri Jan 21 11:54:35 JST 2011)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading abiword-2.8.6.tar.gz...
--2011-01-21 11:54:35-- http://www.abisource.com/downloads/abiword/2.8.6/source/abiword-2.8.6.tar.gz
Resolving www.abisource.com... 130.89.149.216
Connecting to www.abisource.com|130.89.149.216|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 9218827 (8.8M) [application/x-gzip]
Saving to: "abiword-2.8.6.tar.gz.part"
100%[=======================================>] 9,218,827 414K/s in 28s
2011-01-21 11:55:04 (325 KB/s) - "abiword-2.8.6.tar.gz.part" saved [9218827/9218827]
==> Validating source files with md5sums...
abiword-2.8.6.tar.gz ... Passed
==> Extracting Sources...
==> Starting build()...
/tmp/yaourt-tmp-root/aur-abiword-light/./PKGBUILD: line 16: cd: /tmp/yaourt-tmp-root/aur-abiword-light/src/abiword-2.8.6/: No such file or directory
Aborting...
==> ERROR: Makepkg was unable to build abiword-light.
==> Restart building abiword-light ? [y/N]
==> --------------------------------------
==> archuser@archws ~ % <11:find /usr/{bin,lib} -type f -size 0
/usr/lib/python3.1/tkinter/test/__init__.py
/usr/lib/python3.1/tkinter/test/test_ttk/__init__.py
/usr/lib/python3.1/tkinter/test/test_tkinter/__init__.py
/usr/lib/python3.1/test/nullcert.pem
/usr/lib/python3.1/site-packages/ranger/gui/__init__.py
/usr/lib/python3.1/email/mime/__init__.py
/usr/lib/python3.1/email/test/__init__.py
/usr/lib/python3.1/urllib/__init__.py
/usr/lib/python3.1/sqlite3/test/__init__.py
/usr/lib/python3.1/pydoc_data/__init__.py
/usr/lib/python3.1/lib2to3/tests/data/fixers/myfixes/__init__.py
/usr/lib/python2.7/test/nullcert.pem
/usr/lib/python2.7/site-packages/git_remote_helpers/git/__init__.py
/usr/lib/python2.7/site-packages/OpenGL/GL/MESAX/__init__.py
/usr/lib/python2.7/site-packages/OpenGL/GL/VERSION/__init__.py
/usr/lib/python2.7/site-packages/OpenGL/GLU/EXT/__init__.py
/usr/lib/python2.7/site-packages/OpenGL/AGL/__init__.py
/usr/lib/python2.7/site-packages/pychess/__init__.py
/usr/lib/python2.7/site-packages/pychess/widgets/__init__.py
/usr/lib/python2.7/site-packages/pychess/Utils/__init__.py
/usr/lib/python2.7/site-packages/pychess/Utils/lutils/__init__.py
/usr/lib/python2.7/site-packages/pychess/ic/__init__.py
/usr/lib/python2.7/site-packages/pychess/ic/managers/__init__.py
/usr/lib/python2.7/site-packages/pychess/System/__init__.py
/usr/lib/python2.7/site-packages/pychess/Players/__init__.py
/usr/lib/python2.7/site-packages/pychess/gfx/__init__.py
/usr/lib/python2.7/site-packages/xml2po/modes/__init__.py
/usr/lib/python2.7/site-packages/numpy/distutils/tests/gen_ext/__init__.py
/usr/lib/python2.7/site-packages/numpy/distutils/tests/f2py_ext/__init__.py
/usr/lib/python2.7/site-packages/numpy/distutils/tests/pyrex_ext/__init__.py
/usr/lib/python2.7/site-packages/numpy/distutils/tests/swig_ext/__init__.py
/usr/lib/python2.7/site-packages/numpy/distutils/tests/f2py_f90_ext/__init__.py
/usr/lib/python2.7/site-packages/bzrlib/util/__init__.py
/usr/lib/python2.7/site-packages/bzrlib/util/configobj/__init__.py
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/__init__.py
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_LINK_FAILED
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_FAILED_EXCEPTION
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_FAILED_UNPARSEABLE
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/TESTS_FAILED
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_FAILED
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/TESTS_INVALID
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_FAILED_UNKNOWN
/usr/lib/python2.7/site-packages/pygame/examples/__init__.py
/usr/lib/python2.7/site-packages/gtk-2.0/egg/__init__.py
/usr/lib/python2.7/site-packages/gtk-2.0/gi/overrides/__init__.py
/usr/lib/python2.7/site-packages/sonata/__init__.py
/usr/lib/python2.7/site-packages/sonata/plugins/__init__.py
/usr/lib/python2.7/email/mime/__init__.py
/usr/lib/python2.7/email/test/__init__.py
/usr/lib/python2.7/sqlite3/test/__init__.py
/usr/lib/python2.7/pydoc_data/__init__.py
/usr/lib/python2.7/bsddb/test/__init__.py
/usr/lib/python2.7/lib-tk/test/test_ttk/__init__.py
/usr/lib/python2.7/lib-tk/test/test_tkinter/__init__.py
/usr/lib/python2.7/lib2to3/tests/data/fixers/myfixes/__init__.py
/usr/lib/purple-2/perl/auto/Purple/Purple.bs
/usr/lib/perl5/vendor_perl/auto/HTML/Parser/Parser.bs
/usr/lib/perl5/vendor_perl/auto/XML/Parser/Expat/Expat.bs
/usr/lib/perl5/vendor_perl/auto/Crypt/SSLeay/SSLeay.bs
/usr/lib/perl5/vendor_perl/auto/Irssi/Irssi.bs
/usr/lib/perl5/vendor_perl/auto/Irssi/UI/UI.bs
/usr/lib/perl5/vendor_perl/auto/Irssi/Irc/Irc.bs
/usr/lib/perl5/vendor_perl/auto/Irssi/TextUI/TextUI.bs
/usr/lib/pidgin/perl/auto/Pidgin/Pidgin.bs
/usr/lib/firefox-3.6/.autoreg
archuser@archws ~ %
Last edited by aluser (2011-01-21 03:02:22)

Error 2 - No such File or Directory

I was trying to restore an a time machine archive onto a new drive, as it come to the end I got the following message
Unable to archive 'Name.tar' into 'Time Machine Drive'
(Error 2 - No such file or directory)
I am unfamiliar with time machine so any assistance would be useful.
thanks

Thank you for the reply.
I was helping a friend with their back up and it has just been revealed that its not actually a time machine .tar file im now trying to find research the truth behind the original archiving application.
Thank you for the time

./startserver.sh error - No such file or directory - server.properties

Hi,
Can someone help please.
I have just installed power center 8.1.1. and DAC server - software downloaded from OTN.
I am not able to start DAC server. I am new to OBIEE
$ ./startserver.sh
OS detected: Linux
Dec 25, 2008 1:54:41 PM com.siebel.etl.engine.core.ETLUtils logException
SEVERE:
ANOMALY INFO:::
An exception occurred. Shutting down server...
EXCEPTION CLASS::: java.lang.ExceptionInInitializerError
com.siebel.etl.net.QServer.setSpill(QServer.java:159)
com.siebel.etl.net.QServer.<init>(QServer.java:84)
com.siebel.etl.net.QServer.main(QServer.java:420)
::: CAUSE :::
MESSAGE:::Application Manager Failed Initialization
EXCEPTION CLASS::: com.siebel.etl.bootup.ApplicationManagerInitializationExcepti on
com.siebel.etl.bootup.ApplicationManager.initFileSource(ApplicationManager.java: 157)
com.siebel.etl.bootup.ApplicationManager.initSysProps(ApplicationManager.java:79 )
com.siebel.etl.bootup.ApplicationManager.<clinit>(ApplicationManager.java:62)
com.siebel.etl.net.QServer.setSpill(QServer.java:159)
com.siebel.etl.net.QServer.<init>(QServer.java:84)
com.siebel.etl.net.QServer.main(QServer.java:420)
::: CAUSE :::
MESSAGE:::/u01/oracle/product/10.2.0/DAC/bifoundation/dac/conf/server.properties (No such file or directory)
EXCEPTION CLASS::: java.io.FileNotFoundException
java.io.FileInputStream.open(Native Method)
java.io.FileInputStream.<init>(FileInputStream.java:106)
java.io.FileInputStream.<init>(FileInputStream.java:66)
com.siebel.etl.bootup.ApplicationManager.initFileSource(ApplicationManager.java: 151)
com.siebel.etl.bootup.ApplicationManager.initSysProps(ApplicationManager.java:79 )
com.siebel.etl.bootup.ApplicationManager.<clinit>(ApplicationManager.java:62)
com.siebel.etl.net.QServer.setSpill(QServer.java:159)
com.siebel.etl.net.QServer.<init>(QServer.java:84)
com.siebel.etl.net.QServer.main(QServer.java:420)
Dec 25, 2008 1:54:41 PM com.siebel.etl.net.QServer <init>
SEVERE:
Shutting down server...
$

Hi Chris
Could you refer the SAP KBA for the error message
1845424 - Web Dispatcher : SCSA and SysLog not found messages appear during startup
BR
SS

Getting `No such file or directory` error while trying to open bdb database

I have four multi-threaded processes (2 writer and 2 reader processes), which make use of Berkeley DB transactional data store. I have multiple environments and the associated database files and log files are located in separate directories (please refer to the DB_CONFIG below). When all these four processes start to perform open and close of databases in the environments very quickly, one of the reader process is throwing a No such file or directory error even though the file actually exists.
I am making use of Berkeley DB 4.7.25 for testing out these applications.
The four application names are as follows:
Writer 1
Writer 2
Reader 1
Reader 2
The application description is as follows:
‘*Writer 1*’ owns 8 environments and each environment having 123 Berkeley databases created using HASH access method. At any point of time, ‘*Writer 1*’ will be acting on 24 database files across 8 environments (3 database files per environment) for carrying out write operation. Where as reader process will be accessing all 123 database files / per environment (Total = 123 * 8 environments = 984 database files) for read activities. Similar configuration for Writer 2 as well – 8 separate environments and so on.
Writer 1, Reader 1 and Reader 2 processes share the environments created by Writer 1
Writer 2 and Reader 2 processes share the environments created by Writer 2
My DB_CONFIG file is configured as follows
set_cachesize 0 104857600 1   # 100 MB
set_lg_bsize 2097152                # 2 MB
set_data_dir ../../vol1/data/
set_lg_dir ../../vol31/logs/SUBID/
set_lk_max_locks 1500
set_lk_max_lockers 1500
set_lk_max_objects 1500
set_flags db_auto_commit
set_tx_max 200
mutex_set_increment 7500
Has anyone come across this problem before or is it something to do with the configuration?

Hi Michael,
I should have included about how we are making use of DB_TRUNCATE flag in my previous reply itself. Sorry for that.
From writers, DB truncation happens periodically. During truncate (DB handle is not associated with any environment handle i.e. stand-alone DB
) following parameters are passed to db->open function call:
DB->open(DB *db,
DB_TXN *txnid,          => NULL
const char *file,          => file name (absolute DB file path)
const char *database, => NULL
DBTYPE type, => DB_HASH
u_int32_t flags, => DB_READ_UNCOMMITTED | DB_TRUNCATE | DB_CREATE | DB_THREAD
int mode); => 0
Also, DB_DUP flag is set.
As you have rightly pointed out, `No such file or directory` is occuring during truncation.
While a database is being truncated it will not be found by others trying to open it. We simulated this by stopping the writer process (responsible for truncation) and by opening & closing the databases repeatedly via readers. The reader process did not crash. When readers and writers were run simultaneously, we got `No such file or directory` error.Is there any solution to tackle this problem (because in our case writers and readers are run independently. So readers won't come to know about truncation from writers)?
Also, we are facing one more issue related to DB_TRUNCATE. Consider the following scenario:
<ul><li>Reader process holds reference of database (X) handle in environment 'Y' at time t1
</li>
<li>Writer process opens the database (X) in DB_TRUNCATE mode at time t2 (where t2 > t1)</li>
<li>After truncation, writer process closes the database and joins the environment 'Y'</li>
<li>After this any writes to database X is not visible to the reader process</li>
<li>Once reader process closes the database X and re-joins the environment, all the records inserted from writer process are visible</li>
</ul>
Is it the right behavior? If yes, how to make any writes visible to a reader process without closing and re-opening the database in the above-mentioned scenario?
Also, when [db_set_errfile|http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_errfile.html] was set, we did not get any additional information in the error file.
Thanks,
Magesh

Getting Error in CMC - source file error. [No such file or directory]: [CrystalEnterprise.Smtp]

Dear All,
I am able to schedule the Crystal report successfully means mail gets auto triggered as we set in SCHEDULE option. But when we tried to use the notification option we get the status as FAILED. nd in details we get "source file error. [No such file or directory]: [CrystalEnterprise.Smtp]".
But still a mail gets triggred and each and every person will get mail. but the issue is notification will not work properly and no notification mail. And the status is despayed as FAILED with "source file error. [No such file or directory]: [CrystalEnterprise.Smtp]" this message.
Regards,
Rohan Ghadi

Do you have multiple job servers in your environment? Did all the Job servers configured SMTP settings?

Abs error: core.abs.tar.gz no such file or directory

Similar Messages

Maybe you are looking for