Absolute table reference in numbers

I am trying to summarise information from multiple tables into 1 table. The cells that contain the information I want are the same in all the tables.
for example: table 1 :: A1
table 2 :: A1
table 3 :: A1
So I want A1 to stay the same and table ? to change. I tried $signs before the A and the 1 (table 1 :: $A$1), but that didn't work. Is there a way to get this done automatically or am I condemned to a lot of manual changing?

boschjesman wrote:
for example: table 1 :: A1
table 2 :: A1
table 3 :: A1
So I want A1 to stay the same and table ? to change.
The INDIRECT() function (See p. 203 of the iWork functions and Formulas User Guide) for a description) will work here:
The formula: =INDIRECT("jelle"&ROW()&"::A7")
in A2 of Table 1 is filled down to A3 and A4 by dragging the control.
Regards,
Barry

Similar Messages

Referencing tables in another Numbers '09 file

Is there a way to reference table in another Numbers file. For example using the VLOOKUP formula to bring data from another Numbers file into my current table. I was wondering if you have to have that table in the same Numbers file. My Tables are in the thousands and and have 3 alphabets of columns and it would be difficult to fit 2 of those onto my screen in the same Numbers file.

Not from another file, only from within the same document. Numbers does not support external links to other spreadsheet files.

Urgent !! : PA30 : Info type 31 : Unlimited reference personnel numbers

Hi,
In PA30, for infotype 31 is it possible to set unlimited reference personnel numbers. Or what could be the maximum reference personel no. Currently the reference no is limited to 20.
Thanks,
Hem

Yes ... even i was of the same opinion. Last time we set this to 75 and now user wants this to be increased and hence i was looking out for some unlimited option.
see if you can help me or give some clue on this.
Regards,
Hem

Cross-references to numbered steps in a procedure?

RoboHelp 9 - Is it possible to create cross-references to numbered steps in a procedure? For example, if step 19 in a procedure refers back to step 3, can this reference be set so that it can automatically update if new steps are added before step 3?

Hi,
You could try adding bookmarks to the step you want to refer to and the hyperlinking to the bookmark. This is not self maintaining like FM cross references are though...

I want to convert a series of names into a table (in either numbers or pages). The list I have has a name and then an email address in brackets, followed by a 'yes' or a 'no'. I would like to separate the list into three columns

I want to convert a series of names into a table (in either numbers or pages). The list I have has a name and then an email address in brackets, followed by a 'yes' or a 'no'. I would like to separate the list into three columns - the first containing the name, the second containing the email address and the third containing the 'yes' or 'no'.
Can you help me ?

The question that needs to be answered is what is separating the columns? Is it a single tab, one or more tabs, spaces, or what? Or is it the brackets that makes the separation between the three pieces of data?
If it is always a single tab, that makes it really easy. All you have to do is find/replace the brackets with nothing (as Wayne said)
If it might be multiple tabs, you can find/replace tab-tab with a single tab and repeat that a few times until no more double-tabs are found.
If it is one or multiple spaces, that might be difficult. I'll think about this one if this is what you have. I'll ignore this possiblility for now.
If it is the brackets separating the three pieces of data, you would Find/Replace the left bracket with a tab then do the same with the right bracket.

How to get selection screen elements and its table reference of a report ?

halo experts
How can I get selection screen elements and its table reference of a report ? . I tried rs_refresh_from_select_options. But I am unable to get the table and field it is referring to
For eg if my selection screen 1000 is
parameters: p_carrid type spfli-carrid,
select-options :s-_connid type sflight-connid.
is there any Fm or method which gives me what are the screen elements( p_carrid and s_connid ) and what table( splfi and sflight ) and field ( carrid and conid )it is referring to ?

The following code is an example of how you might dynamically determine all your PARAMETERS and SELECT-OPTIONS variables at run time. The PARAMETERS and SELECT-OPTIONS only point to a dictionary element--not a specific table. Even though you may say "spfli-carrid" or "sflight-connid", the data type really references the dictionary type and not a specific table/structure.
REPORT ZTEST_PROG.
TABLES sflight.
DATA:
       screen_tab TYPE STANDARD TABLE OF screen,
       wa_screen TYPE screen,
       scrn_nm TYPE string,
       scrn_leftover TYPE string,
       l_type TYPE REF TO cl_abap_typedescr,
       typ_nm TYPE string,
       typ_pre TYPE string.
FIELD-SYMBOLS <fs_data> TYPE ANY.
PARAMETERS p_carrid TYPE spfli-carrid.
SELECT-OPTIONS s_connid FOR sflight-connid.
INITIALIZATION.
LOOP AT SCREEN.
    IF screen-group3 = 'PAR'
      OR screen-group3 = 'LOW'.
        APPEND screen TO screen_tab.
    ENDIF.
ENDLOOP.
START-OF-SELECTION.
LOOP AT screen_tab INTO wa_screen.
    ASSIGN (wa_screen-name) TO <fs_data>.
    l_type = cl_abap_typedescr=>describe_by_data( <fs_data> ).
    IF wa_screen-group3 = 'LOW'.
      SPLIT wa_screen-name AT '-' INTO scrn_nm scrn_leftover.
      TRANSLATE scrn_nm TO UPPER CASE.
    ELSE.
      scrn_nm = wa_screen-name.
    ENDIF.
    SPLIT l_type->absolute_name AT '=' INTO typ_pre typ_nm.
    WRITE:
             / 'Screen Name: ', scrn_nm,
             / 'DDIC Type:    ', typ_nm.
ENDLOOP.
When you get into defining internal tables you can determine those at run time with cl_abap_structdescr. The following is an example of how you might do that. You can loop through the "components_table" and evaluate each field of the structure in this way.
DATA: structure_reference TYPE REF TO cl_abap_structdescr,
      components_table TYPE abap_compdescr_tab,
      components_structure LIKE LINE OF components_table.
structure_reference ?= cl_abap_structdescr=>describe_by_data( any_structure ).
components_table = structure_reference->components.
I don't know if this answers any of your questions but I hope that some of it is useful.

FOREIGN KEY CONSTRAINT의 MASTER TABLE을 REFERENCE하는 TABLE 찾기

제품 : SQL*PLUS
작성날짜 : 2003-12-17
FOREIGN KEY CONSTRAINT의 MASTER TABLE을 REFERENCE하는 TABLE 찾기
================================================================
Master table 이 dept2일 때, 이 테이블을 참조하는 table들을 찾는 SQL
select x.table_name "reference table"
from
(select distinct r_constraint_name,table_name
from all_constraints
where constraint_type='R' ) x, all_constraints a
where a.table_name = 'DEPT2'
and x.r_constraint_name = a.constraint_name;

JDeveloper Mapping Workbench - Create Table References?

How can I create a Table Reference in JDeveloper's Mapping Workbench?
For example, I have ITEM and ITEM_DETAILS tables. The DB does not have a FK defined from ITEM_DETAILS and ITEM. So I need to create the Toplink Table Reference myself.
In the standalone Toplink Workbench I see how to do this.
In JDeveloper 10.1.3.1 mapper UI I don't see how this is done.

You can edit the offline DB objects stored in your JDeveloper project to add the FK constraints not on the database.
If you also use these table definitions to re-generate the schema there is a check-box in the lower left of the FK panel that allows you to specify that a FK constraint is for offline purposes only. You can still select it in TopLink but it will not be re-generated onto the database.
Doug

Problems setting "table reference" for TopLink relationships

I'm trying to use TopLink to create Java objects over two tables that are linked in a many-to-many relationship. I followed the instructions on the 10g tutorial page (drag all three tables into a database diagram), then created a new field (of type Collection) in each of the tables that I'm joining. I then set them both to be many-to-many, and tried to configure the first one. On the general tab, I've set the 'Reference Descriptor' to point to the other table. I've set the 'Relation Table' to point to the associative entity, and disabled indirection.
When I go to the 'Source Reference' tab, there's nothing in the 'Table Reference' dropdown, and there's no button to create anywhere I can find on that screen. From what I've found looking at old TopLink documentation online, there were new, add, and remove buttons off to the right on older versions of TopLink.
What do I have to do in this version to create a table reference I can use for the join?
If I run the 'mapping status report' for the object I'm working with (persons), I get the following:
Mapping persons -> Table reference is invalid because of the target table chosen.
Mapping persons -> No table reference is selected.
Mapping persons -> No source reference is selected.
Mapping persons -> No target reference is selected.
I don't really know enough about TopLink to know if these error messages are pointing at something other than the fact that I can't get a table reference to show up or not.
I'm using the JDeveloper 10g preview (build 1375).
Thanks in advance for any ideas you might have,
Jonathan

I'm trying to use TopLink to create Java objects over two tables that are linked in a many-to-many relationship. I followed the instructions on the 10g tutorial page (drag all three tables into a database diagram), then created a new field (of type Collection) in each of the tables that I'm joining. I then set them both to be many-to-many, and tried to configure the first one. On the general tab, I've set the 'Reference Descriptor' to point to the other table. I've set the 'Relation Table' to point to the associative entity, and disabled indirection.
When I go to the 'Source Reference' tab, there's nothing in the 'Table Reference' dropdown, and there's no button to create anywhere I can find on that screen. From what I've found looking at old TopLink documentation online, there were new, add, and remove buttons off to the right on older versions of TopLink.
What do I have to do in this version to create a table reference I can use for the join?
If I run the 'mapping status report' for the object I'm working with (persons), I get the following:
Mapping persons -> Table reference is invalid because of the target table chosen.
Mapping persons -> No table reference is selected.
Mapping persons -> No source reference is selected.
Mapping persons -> No target reference is selected.
I don't really know enough about TopLink to know if these error messages are pointing at something other than the fact that I can't get a table reference to show up or not.
I'm using the JDeveloper 10g preview (build 1375).
Thanks in advance for any ideas you might have,
Jonathan

Oracle TopLink 10g Introductory Tutorial: No Table Reference available

Hi,
I'm trying to work through the Oracle TopLink 10g Introductory Tutorial (http://www.oracle.com/technology/products/ias/toplink/doc/10131/main/_tutorial/index.htm).
At the point 'Map the Java Classes: Create One-to-One Mappings' (http://www.oracle.com/technology/products/ias/toplink/doc/10131/main/_tutorial/index.htm) I'm not able to select a table reference because there is no one available.
As result i get the following message after generating 'Mapping Status Report':
TopLink Map 'tut01Map' -> One of the packages is incomplete.
Package example.model -> One of the descriptors in this package is incomplete.
Descriptor Employee -> Some mappings are incomplete.
Mapping address -> No table reference is selected.
Mapping address -> Table reference is invalid because of the target table chosen.
Mapping version -> Mapping references write lock field stored in cache, but is not read-only.
Mapping phoneNumbers -> No table reference is selected.
Mapping phoneNumbers -> Table reference is invalid because of the target table chosen.
Descriptor PhoneNumber -> Some mappings are incomplete.
Descriptor PhoneNumber -> The following primary key fields are unmapped: EMP_ID
Descriptor PhoneNumber -> The following primary key fields have no writable mappings: EMP_ID
Mapping owner -> No table reference is selected.
Mapping owner -> Table reference is invalid because of the target table chosen.
End TopLink Map 'tut01Map'
Did I make a mistake or is there a wrong configuration? Please help.
I'm using:
JDeveloper 10.1.3.2.0
MySQL 5.0.33 with Connector/J 5.0.5
Windows XP
Thanks, TGau
Message was edited by:
TGau
Update

Yes I did. But my database storage engine is set to MyISAM which don't support foreign keys. So this 'error' results from database configuration (Info: InnoDB do support foreign keys).
I'm wondering why the queries didn't throw any errors. So the foreign key/reference part was just skipped.
Thank you very much, rsapir.
PS:
How can I configure configure 'application side' references/associations? It is described in the TopLink Developers Guide on site 34-10 ... but I have no Add/New Buttons?

Handling tables with large numbers of fields

Hi
What is the best practice to deal with tables having large numbers of fields? Ideally, I would like to create folders under a Presentation Table and group fields into folders (and leave fields that may be needed rarely in a folder named 'Other Information').
Is there a way to do this in Oracle BI? Any alternatives?
Thanks

Answering my own question:
http://oraclebizint.wordpress.com/2008/01/31/oracle-bi-ee-10133-nesting-folders-in-presentation-layer-and-answers/
This is definitely a working solution (creating multiple tables and entering '->' in their description in order for them to act as subfolders). Definitely not intuitive and extremely ugly, especially since reordering tables and columns isn't possible (or is it? in another non-obvious way? )
Anyway it seems we have to live with this.

How to Copy Personal data from ESS to Reference Personel Numbers

When users with multiple personel numbers (employees with multiple contracts) change bank data address data or personal data in ESS, the data is not copied to the reference personel numbers. Whilst, if the data is changed in R/3 al data is copied properly to the reference pers. numbers.
Is there a switch or a customizing setting to enable this for ESS?
joost
Edited by: J. Weemhoff on Jul 17, 2008 2:01 PM

When users with multiple personel numbers (employees with multiple contracts) change bank data address data or personal data in ESS, the data is not copied to the reference personel numbers. Whilst, if the data is changed in R/3 al data is copied properly to the reference pers. numbers.
Is there a switch or a customizing setting to enable this for ESS?
joost
Edited by: J. Weemhoff on Jul 17, 2008 2:01 PM

TableChanged() does not work with parrent table reference

Hi,
I used this example http://www.javalobby.org/articles/jtable/ where the cells refocus after updating, but I have rewrote it to my needs and the program throws nullpointerexception when I update any cell:(
here is the tableChanged part of code:
    public class InteractiveTableModelListener implements TableModelListener {
        public void tableChanged(TableModelEvent evt) {
            if (evt.getType() == TableModelEvent.UPDATE) {
                int column = evt.getColumn();
                int row = evt.getFirstRow();
                System.out.println("updated row: " + row + " column: " + column);
               if((column + 1) >= model.getRowCount()){
                  table.removeColumnSelectionInterval(column,column);
                }else{
                  table.setColumnSelectionInterval(column + 1, column + 1);
                table.setRowSelectionInterval(row,row);
}the table reference worked in the exaple but doesnt work in my program:(
here is the init of the table in function initComponent:
        tableModel.addTableModelListener(new InteractiveTableModelListener());
        TableSorter sorter = new TableSorter(tableModel);
        JTable table = new JTable(sorter);the class is on the same level as the function
i have searched all the internet for this with no results:(
thank you for your advice!

Yes, you are right, I wrote this post in a hurry and exhaused, that it does not work.
I'm trying to write out a data file (now only a vector of data) in a JTable and I want to edit the rows and after I submit text in a cell, I want the caret to move one cell right, so the user can write another text, just like in MS Excel. At the end of the row the caret disapears but does not create another row.
And I have problems with variable JTable table in the inner class that contains method tableChanged().
Well After making an example I realized it worked and then I checked the example line by line and found out that I declare another JTable with the same name in the table initializing method,
Then the variable couldnt work in tableChanged method... It was empty...
I used your example from thread, you advised me:
import java.awt.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.table.*;
public class TableProcessing extends JFrame implements TableModelListener
     // here I declare the table
        protected JTable table;
     public TableProcessing()
          String[] columnNames = {"Item", "Quantity", "Price", "Cost"};
          Object[][] data =
               {"Bread", new Integer(1), new Double(1.11), new Double(1.11)},
               {"Milk", new Integer(1), new Double(2.22), new Double(2.22)},
               {"Tea", new Integer(1), new Double(3.33), new Double(3.33)},
               {"Cofee", new Integer(1), new Double(4.44), new Double(4.44)}
          DefaultTableModel model = new DefaultTableModel(data, columnNames);
          model.addTableModelListener( this );
                // here I declare it again, which is a MISTAKE
          JTable table = new JTable( model )
               // Returning the Class of each column will allow different
               // renderers to be used based on Class
               public Class getColumnClass(int column)
                    return getValueAt(0, column).getClass();
               // The Cost is not editable
               public boolean isCellEditable(int row, int column)
                    int modelColumn = convertColumnIndexToModel( column );
                    return (modelColumn == 3) ? false : true;
          table.setPreferredScrollableViewportSize(table.getPreferredSize());
          JScrollPane scrollPane = new JScrollPane( table );
          getContentPane().add( scrollPane );
      * The cost is recalculated whenever the quantity or price is changed
     public void tableChanged(TableModelEvent e)
          System.out.println(e.getSource());
          if (e.getType() == TableModelEvent.UPDATE)
               int row = e.getFirstRow();
               int column = e.getColumn();
               if (column == 1 || column == 2)
                               // AND here is not initialised - throws NullPointerException
                    TableModel model = table.getModel();
                    int     quantity = ((Integer)model.getValueAt(row, 1)).intValue();
                    double price = ((Double)model.getValueAt(row, 2)).doubleValue();
                    Double value = new Double(quantity * price);
                    model.setValueAt(value, row, 3);
     public static void main(String[] args)
          TableProcessing frame = new TableProcessing();
          frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
          frame.pack();
          frame.setLocationRelativeTo( null );
          frame.setVisible(true);
}

Tables for Serial Numbers

Hi,
Can i know the tables which maintain data for serial numbers?
Regards
Sasika

Dear,
Please refer this link,
[Tables for Serial Numbers|Re: Tables about Serial Numbers]
Regards,
R.Brahmankar

Table and figure numbering in multi-chapter book

Using InDesign CC 2014 I am editing a book that consists of 23 chapters. Each chapters are added to the book separately. There are 5 levels of titles, level 1-4 is numbered (first level is the chapter title), the 5th is not.The numbering of the titles in chapters works very well, but I have problem with numbering of figures and tables.
The numbering of tables and figures should look like this: Table 1.1., 1.2., etc, Figure 1.1., 1.2., etc. The first number is always the chapter number, the second is the number of table/figure in order - within the chapter. I want the second number to re-start in each chapter. But if I select "continue from the previous number" (or something like this - I have Hungarian version, tried to translate to English), the numbering does not re-start with each new chapter, however gets the correct ^H number. If I select "start", all tables and figures will be ^H.1.
My question is: what should I do on one hand to be able to use (and sync) all formats (including tables' and figures' captions with numbers) in the whole book, in the same time making the figures' and tables' numbering having ^H followed by a number re-starts in each chapter? For this, the table and figure number should be which level on the list? What to do with "restart numbering at this level after" option?
I have searched the www from A to Z and back but could not find the answer. Please, help me! Oh, and please, write the how-to description step-by-step (maybe illustrated?), as I use Hungarian version, which makes applying the suggestions a bit difficult. Thank you, in advance, for your kind help!

Darn Framemaker and its use of phantom numbering placeholders.
But seriously thanks - worked line a champ
Bob Geib
Design & Test Engineer
Microwave Filter Components
Aeroflex Microelectronic Solutions
350 Kennedy Drive
Hauppauge, NY 11788
Direct: 631-404-3669
Cell: 526-523-1265
Email: [email protected]

Absolute table reference in numbers

Similar Messages

Maybe you are looking for