[Academic survey] Because you hate Windows , so you join in Linux , is

over 6 years , when I start to develop the project of linux , until now .... it's diffcult to do this kiind of job before , there is few howto documents and introduction , but now , it's much easier than before .
and there is some different , I think the linux's users who join in Linux for hating Windows are decreasing. is it real ?
for confirm this phenomenon , I design a survey , please do me a favor , I need many linux's users to complete this job . please
In Taiwan , I can send a gift to people who complete this survey , but in here , I just can send my appreciation and blessing , sorry .... it's really very negligible , I hope somebody can help me
the survey's web site is here : http://spreadsheets.google.com/viewform … M2tXOFE6MQ

I was able to go through all seven pages.
For the most part the question utilize different terminology and/or phrasing from the standard but are otherwise understandable. However, below are listed the questions which make little or no sense to me.
page 1 question 3 wrote:Although software cracking is not acceptable by people, but all of softwares should be accessed freely.
I am not sure what you mean by "software should be accessed freely" in relation to cracking. Are you referring to DRM cracking?
page 2 question 5 wrote:I am a person who makes excuses for belonging to the Open Source community.
I am sorry. I simply can not understand what this question is asking.
page 3 question 8 wrote:I was aware of myself.
Sorry, I do not understand this one either.
page 4 question 6 wrote:I felt in total control of my body.
Same with this question.
page 7 last question wrote:How often did you participate in meeting of Open Source?
Do you mean conferences, sprints, generic meetings or generic gatherings?
end page wrote:感謝！
You are welcome. ^_^

Similar Messages

HT2506 Hello I'm unable to open any pdf's with preview window opens up with message file couldn't be opened because you don't have permission to view it (none of the pdf's have any security thanks if you can assist

Hello this week I'm unable to open any pdf's with preview, when I select to open a window opens up with message "file couldn't be opened because you don't have permission to view it" none of the pdf's have any security thanks if you can assist

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Firefox tries to install update then says cannot install update because you have to close another Firefox window, repeats every minute. Doesn't stop.

Update cannot install, says I must close any other Firefox window. (No other window open ) Cannot install update because another Firedox window is open.Since a recent update occured, You Tube videos flicker and browser favorites flicker. There is a flash card speed adjustment. The Flash Player and Firefox is not in sync.

See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates)
Do a clean reinstall:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Can't move any files... "The operation can't be completed because you don't have permission to access some of the items."

This is a strange one... I just recently did a complete format/reinstall of Lion because of very poor performance after upgrading.
So I'm on a totally fresh system, no TimeMachine restore or anything. I've installed all my apps from scratch - no prefrence file backups or anything. Everything is fresh.
Yesterday I tried to copy a file from one folder to another and I got the error "The operation can’t be completed because you don’t have permission to access some of the items". Checked file permissions... repaired disk permissions... made sure I was logged in as admin (I only have one account)... everything looks good.
This is now happening when trying to copy any files anywhere on my machine... Very frustrating.
There's a couple strange side-effects I've noticed:
- I can move & copy files just fine in terminal... without sudo...
- The little lock icon in the bottom right of the Get Info window doesn't do anything - I can't unlock it. I can still edit the permissions for the file/folder but I can't select the "apply to enclosed items..." option.
Does anybody know what the heck is going on?

jsd2 wrote:
Try creating a new admin user account, logging into it, and then creating some new items on the Desktop and elsewhere. Does the same thing happen there?
Ok the strangeness continues!
I created a new "TestAdmin" account, but it doesn't show up in the Users & Groups prefrences sidebar... The /Users/testadmin folder was created, but the account doesn't show up in the prefrences or login window...
I tried a reboot to see if the account would show up and it still doesnt.... However after the reboot I am now able to copy files again!
I'm paranoid that the problem will show up again since I have no idea what fixed it. I tried rebooting previously after repairing permissions which didn't solve the issue so it's not like I haven't rebooted since it started.
And now I have the issue of not being able to create user accounts.
A little dissapointed with Lion to be honest... the new features are cool but there are so many little bugs it really feels half-baked.

I backed up my old core 2 duo imac and and was trying to transfer files to my new 2011 imac and when i go to oppen a folder from what i transferred it says "The folder "Music" can't be opened because you don't have permission to see its contents."?

I backed up my old core 2 duo imac and and was trying to transfer files to my new 2011 imac and when i go to oppen a folder from what i transferred it says "The folder “Music” can’t be opened because you don’t have permission to see its contents". Why cant i access the files from my old mac? I tried the time machine and that isnt working either. I have files that I need to use on my new mac, all my old programs and such. I thought they said it was easy to get your files from one mac to another. Please help.

Your account names are probably different on the two Macs. If you know the UNIX command line, open a terminal window and run:
$ id
You should see a line that starts with something like this:
uid=501(your_user_id_here)
now check the owner of the folder you copied over:
$ ls -ld Music
drwx------+ 8 some_user_id_here staff 272 May 14 16:08 Music
Do the IDs match? If not, you could change the ownership. Say your id is "johnsmith"
$ chown -R johnsmith Music
Now try and access it with iTunes.

HT201250 i'm getting message: can't be opened because you don't have permission to see its contents. and he operation can't be completed because an unexpected error occurred (error code -8003).

I took my computer in to have the Backup restored onto my computer after having a new harddrive put onto my 1year 1/2 old MacBook Pro. When i got it home there was a new User that i had to logout of to getting into my normal user. Don't know why this was, just figured the Mac guys that installed my backup did this for some odd reason. Today i could not open any of my files in the backup on the time machine. All the folder had line going thought them and when i clicked on them I revieved this message: can’t be opened because you don’t have permission to see its contents. After talking with that same mac store. I decided to just delete all the files out of the time machine as it was just put back on my computer and i have everything i need. Hours later when i tried to empty the trash i got this messsage: the operation can’t be completed because an unexpected error occurred (error code -8003).
Any advise how to fix my problem?
thanks in advance

While you see a single trash can, in reality there are trash folders on each mounted volume. I don't use TM but what you are describing implies that a TM drive is no different with the way trash is treated. So when the TM is unmounted the trash folder on there is gone and thus the trash looks empty. Remount the drive, the trash folder on it now causes the trashcan to look like something is in it.
If TrashIt! could not remove the file, I'm sorry, you will need to use the terminal. We can do this one step at a time so you only have to copy/paste the lines into terminal (except the first time). So launch Terminal (in utilities). You might want to make the window that is shown a bit larger with the grow box since it's pretty small.
This first line is the only exception to the copy/pasting since you have to enter some information.
sudo ls -laR /Volumes/your-TM-volume-name/.Trashes
where your-TM-volume-name is the name of your TM volume. That's the part you have to fill in since I don't know it.
When you hit return the sudo in that command will cause a prompt for your admin password. Enter it and hit return again. Note the password will not be shown as you type it. Post the results so I can tell you what to do next.
Note this ls command is not doing anything but listing the files in the TM's .Trashes folder. Remember I said each drive has it's own trash folder. .Trashes is it.

Wind Vista SP2. iTunes 10.6.3.25. I'm trying to Consildate my Music Library on this PC, and get the error: "Copying files failed, because you don't have permission to change your iTunes Media folder or a folder within it." My admin user has Full Control

Any suggestions would be greatly appreciated!

I did what you suggested on all three folders: The main Music folder on the Mac hard disk, on the iTunes folder on the external 160GB Hard drive which contains the current media content and on the new 2TB hard disk on which I created a new media folder. I selected permission for myself which were already read+write and chose the apply to enclosed items on all three folders. I then changed the permission for others to read+write and applied to enclose items also an all three folders.
But it didn't solve anything.
Here's what happens: I choose the new directory in iTunes preferences (the media folder on the 2TB disk) I then go to File > Library > Organize Library and then choose Consolidate files. A window pops up and says copying "filename" with a progression bar underneath but the filename never changes. Instead the beachball appears when the mouse pointer hoovers over iTunes. Upon pressing the iTunes icon in the Dock it says that iTunes is not responding. At this point there's 2 different ways:
A - If I then force quit iTunes the iTunes window disappears but the application does not close. When I want to eject the 2TB disk it says it's being used by another application. Only when I cut the power to the 2TB disk does iTunes fully close. A window then pops up and says that the drive was not put away properly etc.
B - if I cut the power to the drive without force quitting iTunes, a window appears with the said: "Copying failed because you don't have permissions to change iTunes media folders etc." iTunes remains open and fully functional.

ITunes could not contact the iPhone software update server because you are not connected to the internet...???

Ok I’m completely lost here....
I’m running Microsoft Windows XP Home Edition Service Pack 3 (Build 2600), I updated iTunes to 11.0.2.25 and some other updates for windows last night on my laptop. I try connecting to download the iOS 6.1.2 update for my iPhone 4 and my iPhone 5 via iTunes. I am getting this message for both "iTunes could not contact the iPhone software update server because you are not connected to the internet. Make sure your internet connection is active and try again." Everything was fine with connecting prior to running these updates because I downloaded the 6.1 update with no problems when it came out.
What I have done so far with which has made no difference:
Checked my internet connection
Changed my internet connection
Signed out of iTunes and then signed back in
Ran diagnostics via iTunes, comes back with: Network interfaces verified- Internet connection failed- Secure link to iTunes store verified
          Connection attempt to Apple web site was successful.
          Connection attempt to browsing iTunes Store was successful.
          Connection attempt to purchasing from iTunes Store was successful.
          Connection attempt to iPhone activation server was successful.
          Connection attempt to firmware update server was successful.
          Connection attempt to Gracenote server was successful.
          Last successful iTunes Store access was 2013-02-20 20:40:48.
Disabled firewall, spy sweeper, virus scanner
start>run>cmd> typed "netsh winsock reset"
Rebooted
Checked the parental controls in iTunes
Start>control panel>internet options>connections tab> lan settings> selected the "automatically detect settings"
Deleted iTunes and reinstalled iTunes
When I would "ping gs.apple.com" it would come back with "request timed out" no matter what internet connection I was on, so I went into the hosts file start>my computer>(C:)>WINDOWS>system32>drivers>ect>HOSTS and added "#     127.0.0.1     gs.apple.com". Now it will ping gs.apple.com just fine but still comes up with the "iTunes could not contact the iPhone software update server because you are not connected to the internet" message in iTunes when i try to download the update.
If anyone can come up with any ideas that I haven’t tried, please let me know. This is keeping me back from updating both of my phones along with if anything should ever happen to them; restores as well.

im computer is connected i can go to the apple store through itunes but when i plug my phone in i keep getting that alert... i plugged my phone in to update it after the apple loaded the itunes icon and a usb showed up.

Because you this loading firefox.exe like process from the beginning of the computer with a load from 38 to 42000 kb or like I can solve this problem

because you this loading firefox.exe like process from the beginning of the computer with a load from 38 to 42000 kb or like I can solve this problem, atualmente when lighting the computer among the processes that are loaded when beginning the computer is a process of name firefox.exe with a load of between 30 and 50000 kb but I don't find to the registered firefox inside the programs to crgar from the beginning when entering for msconfig.exe my operating system is so far windows xp up-to-date sp3 and my firefox is 7.0.1 version in Spanish that is my native language.

That seems very suspicious. Two suggestions.
First, try Firefox's Safe Mode. This will let you work around problems with add-ons and perhaps help you identify things to remove so that Firefox goes back to normal.
I recommend making a backup of your Firefox settings before starting in Safe Mode. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
Next, try starting Firefox in Firefox
[http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
Does that work? If so, you may need to disable your add-ons and just bring the most essential ones back to life until you discover the problem one.
Second thought: malware. You could supplement your usual security scans with these:
Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
SUPERAntiSpyware : http://www.superantispyware.com/
HouseCall : http://housecall.trendmicro.com/
Hope this helps.

"itunes could not contact the ipod software update server because you are not connected to the internet" Help?

Hello all, new to the forums.
I've been recieving the error message "itunes could not contact the ipod software update server because you are not connected to the internet". This problem didn't occur at all for the past 2 years of using itunes.
I've already scanned through numerous websites and forums for help, but none of them worked.
This set of instructions resulted in no change to any of the problems, though iTunes lists that as the supposed solution.
# Open Internet Options from control panel.
# Click the Connections tab.
# Click the LAN Settings button.
# Select the Automatically detect settings checkbox.
Others include installing IE7, which that didn't work either.
Can anyone help?

Here it is:
Microsoft Windows 7 x64 Ultimate Edition (Build 7600)
LENOVO 2537FC4
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 003DB3100363E3C0
Current user is not an administrator.
The current local date and time is 2011-06-16 17:03:57.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA NVS 3100M
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.3.1.55 (x64) is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {505BB17D-FA14-4FA0-9D77-F7998FEBB435}
Description:          Intel(R) Centrino(R) Advanced-N 6200 AGN
IP Address:          192.168.0.3
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          Yes
DHCP Server:          192.168.0.1
Lease Obtained:          Thu Jun 16 16:54:56 2011
Lease Expires:          Fri Jun 17 16:54:56 2011
DNS Servers:          192.168.0.1
                    68.94.156.1
Adapter Name:          {610821DE-0532-4C65-839B-B74B65859FBA}
Description:          Intel(R) 82577LM Gigabit Network Connection
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 16:00:00 1969
Lease Expires:          Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name:          {10983C8A-FCDA-4B2F-8A89-E1596BA6B7BA}
Description:          Bluetooth Device (Personal Area Network)
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 16:00:00 1969
Lease Expires:          Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection:          Broadband Connection
Connected:          No
Online:                    No
Using Modem:          Yes
Using LAN:          No
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-06-16 15:35:33.

The operation can't be completed because you don't have permission to access some of the items. ive moved these files from my sd card to the trash, when i take out the sd card the trash empties but then fills up when i put it back in, it wont empty.

The operation can’t be completed because you don’t have permission to access some of the items. ive moved these files from my sd card to the trash, when i take out the sd card the trash empties but then fills up when i put it back in, it wont empty.

In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section?

Error message: "The media can't be used because you don't have access privileges, or because it has no content or is corrupt."

I get the error message "The media can’t be used because you don’t have access privileges, or because it has no content or is corrupt." when I drag photos (or copy and paste photos) from iPhoto to Pages/Word.
It never used to do this and is really quite annoying, as I now have to find the file through finder to drag from there.
I had to rebuild the iPhoto library a few days ago, is it something to do with this?
Thanks in advance.

Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

The operation cant be completed because you dont have permission to access some of the items

First of all sorry if my gammar isnt the best, as I suffer for Dylexia and spell and gammar check isnt that good yet!
Has anyone ran into the same issue when copying files to a network share or removable drive where you have full access over and you get a good old error message
"operation cant be completed because you dont have permission to access some of the items" or and apple random number code that you need to good (so much for a good gui with having to google for the number codes!)
It really annoyes me as no matter what operating system you use it never outputs a reports to inform what "items" it has issues with and there locations so you can copy them manually.
its not too bad when its a few items but when it is 50 or so items in several folders you are copying and the os decedes it doesnt like you and makes up an poor error message such as the one above I really want to throw it out the window...
I have check for premissions on the destination and all are ok .
i have also check and none of the files are locked or read only.
I am sure I am not the only one who want the OS to explain what file and its location caused the issue.
Does anyone know the fix or uses tools that bypass the os annoying errors.
As the folder I have been trying to copy has only copied 348 of the 1591 files across.
Thanks for the help!

that1coolkid,
which Terminal “trick” have you already tried?

"Device Manager is running in read-only mode because you are running it on a remote computer" when local

Hello - since configuring a Windows Web Server 2008 R2 x64 to be hardened for an internet-facing deployment I receive this:
"Device Manager is running in read-only mode because you are running it on a remote computer."
when entering Device Manager.
I have tried reversing the changes I have made, such as:
- Re-adding Client for Microsoft Networks
- Re-enabling NetBIOS over TCP-IP
- Re-adding File and Printer Sharing
- Disabling the Windows Firewall in all profiles (public, domain, private)
I get no joy. It looks like a Microsoft ballsup. I'll try and use Process Monitor to have a look. Google returns only 1 page for this error.
Luke

Got it.
After my changes to DHCP and static IPs the machine picked up the IP address of another server on my little home LAN. The hostname in IPCONFIG was different to the actual server computer name and so this led Device Manager to think the connection and the
local machine were different.
What an odd and infuriating problem. My thoughts on this are that Microsoft should be more verbose with error messages and their causes. For example, displaying the values of the assertion would help diagnose a problem; "The host-name www02.farm.brand.com
that you are connecting from does not match the local host-name rest01.dev.farm.brand.com. Connections from remote computers can only use Device Manager in read-only mode; some options will be disabled."
When troubleshooting, the main thing on an engineer's mind is "what has led Windows to its [unexpected] conclusion?"
Luke

"File cant be opened because you dont have permission to use it"

Im suddenly getting this message on all the photos stored in my computer: "File cant be opened because you dont have permission to use it" If I click on 'Get Info' for pics, the "Sharing and Permissions" doesnt open either. Im OS X 10.7.3 Help!

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Launch the Terminal application by entering the first few letters of its name into a Spotlight search. If that doesn’t work, then in the Finder, press the key combination shift-command-U. The application is in the folder that opens.
Drag or copy – do not type – the following line into the Terminal window, then press return:
chmod -R -N ~
You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

[Academic survey] Because you hate Windows , so you join in Linux , is

Similar Messages

Maybe you are looking for