ACCESS 97 & ORACLE VERSION 7

Two questions really :
1. Is there a migration tool for any oracle version prior to 7.3.
We're moving to 7.3 within the next two months but need to
investigate migration before then.
2. When performing a link table / attach table from access the
list we get list all possibilities of users and tables blowing
the list and taking a long time to come back. we're using
microsofts OBDC driver on this one and attaching to oracle
version 7.1
null

The two lines you quote aren't errors, they're warnings and they're pretty standard fare. If there isn't anything else in the ODBC log, then the driver isn't returning any errors. I'm not sure why Access is failing, so let's look at the client configuration first.
- I assume you've successfully installed the 8.1.6 client on the machine with Access. Were there any errors during the install?
- You say you're using the 8.1.6 version of the Oracle ODBC driver-- can you look to see what the last digit of the version is? If possible, I'd start by downloading the most recent 8.1.6.x ODBC driver from OTN.
- Check which version of the MDAC you have installed (new versions & a version checker are available from Microsoft at <http://www.microsoft.com/data>.
- The ODBC driver you download above will list which versions of the MDAC it is expected to work with. Make sure your version is one of the listed versions.
Justin

Similar Messages

Oracle version of the Microsoft Application Blocks for Data Access

Where can I find an Oracle version of the Microsoft Application Blocks for Data Access? Is it tied to any specific version of the Oracle Client software? I currently have version 8.1.7.3 installed.

I think that DAAB 3.0 only has support for ODBC and OLEDB, which indeed can be used for Oracle. The Nile 3.0 program has an OracleHelper file, but this one uses the Microsoft Dataprovider for Oracle RDBMS. With some minor changes you can make this version work with the ODP.NET that Oracle provides.
The issue I'm trying to convey is, that it seems hard to use the Microsoft Application Blocks using ODP.NET. As I described earlier, the LOBs and REF Cursors are reference types that actually point to data in the Database. This means, that the Connection to the database must be open to get to the Data.
In the DataHelper, you open the Connection and get the data you need. The DataHelper should then clean up and close the Connection. Then you pass the data to the caller. However, since we're dealing with Reference types, a closed connection means no data.
So I guess the only way to make this easy to use and not having to assume the caller/developer will open and close connections, you must copy the data in an instance of a DataSet, before you close the connection and then pass the Dataset back to the caller.
I wonder if people have delt with this issue and what their solution looks like.
thnx

Error while accessing Oracle E-Business Suite 11i from Linux/firefox

error while accessing Oracle E-Business Suite 11i from Linux/firefox
OS: SUSE Linux Desktop 11(SLED11)
Web browser: firefox 3.x
Java versions:
# rpm -qa |grep java
java-1_6_0-sun-plugin-1.6.0.u18-0.1.1
java-1_6_0-sun-1.6.0.u18-0.1.1
# java -version
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Server VM (build 16.0-b13, mixed mode)
when I access the url firefox says
"Additional plugins are required to display all the media on this page"
then I clicked on "Install Missing Plugin" button
then I got the following message
No Suitable Plugins were found
Unknown Plugin (application/x-java-applet;jpi-version=1.4.1)
please help/suggest
Regards

Hi user;
Its not certified to login EBS from linux client
Please check:
Linux-cleint (ebs) certification
pluggins
Hope it helps
Regard
Helios

Error when accessing Oracle BPEL console

The following error message shows up when access oracle BPEL console. Any advice to resolve this error? Thanks a lot in advance!
***************************************************************************** Oracle BPEL Server version 10.1.3.1.0 Build: 0 Build time: Mon Oct 09 08:44:49 PDT 2006 Build type: release Source tag: PCBPEL_10.1.3.1.0_GENERIC_061009.0802
Exception Message:
[java.lang.NoClassDefFoundError] org/apache/log4j/Category
Exception Trace:
java.lang.NoClassDefFoundError: org/apache/log4j/Category at java.lang.Class.getDeclaredConstructors0(Native Method) at java.lang.Class.privateGetDeclaredConstructors(Class.java:2328) at java.lang.Class.getConstructor0(Class.java:2640) at java.lang.Class.getConstructor(Class.java:1629) at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:410) at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529) at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235) at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:370) at org.collaxa.thirdparty.apache.axis.components.logger.LogFactory.getLog(LogFactory.java:37) at org.collaxa.thirdparty.apache.axis.encoding.TypeMappingImpl.(TypeMappingImpl.java:68) at com.collaxa.cube.engine.deployment.TypeSoapRegistry.registerHeaderTypes(TypeSoapRegistry.java:251) at com.collaxa.cube.engine.deployment.TypeSoapRegistry.load(TypeSoapRegistry.java:79) at com.collaxa.cube.engine.core.TypeRegistry.load(TypeRegistry.java:126) at com.collaxa.cube.engine.CubeEngine.__load(CubeEngine.java:613) at com.collaxa.cube.engine.CubeEngine.load(CubeEngine.java:474) at com.collaxa.cube.admin.ServerManager.loadDomain(ServerManager.java:1111) at com.collaxa.cube.admin.ServerManager.loadAllDomains(ServerManager.java:924) at com.collaxa.cube.admin.ServerManager.init(ServerManager.java:111) at com.collaxa.cube.ejb.impl.ServerBean.init(ServerBean.java:254) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35) at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119) at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52) at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119) at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAs(Subject.java:396) at com.evermind.server.ThreadState.runAs(ThreadState.java:622) at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34) at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119) at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:43) at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119) at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52) at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119) at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55) at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87) at ServerBean_RemoteProxy_4bin6i8.init(Unknown Source) at com.collaxa.cube.admin.CXLoaderServlet.init(CXLoaderServlet.java:60) at javax.servlet.GenericServlet.init(GenericServlet.java:256) at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2361) at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4810) at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4734) at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4922) at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1134) at com.evermind.server.http.HttpApplication.(HttpApplication.java:738) at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:414) at com.evermind.server.Application.getHttpApplication(Application.java:545) at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1990) at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.(HttpSite.java:1909) at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:645) at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290) at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270) at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177) at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2450) at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:998) at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131) at java.lang.Thread.run(Thread.java:595)

ru able to login to the other applications on your App server ... viz.
Oracle App Server Console, ESB Console, Worklist App ... etc

Control file version 10.2.0.1.0 incompatible with ORACLE version 10.2.0.0.

hi;
I'm totally new to the oracle databases field...am trying to startup the database using the parameter file init.ora by using the command
startup pfile='/u01/app/oracle/product/10.2.0/db_1/dbs/init.ora'
But its giving me the following error:
ORA-00201: control file version 10.2.0.1.0 incompatible with ORACLE version
10.2.0.0.0
ORA-00202: control file:
'/u01/app/oracle/product/10.2.0/db_1/dbs/control01.ctl'
Can anyone help me with this error?
Thanks!

startup pfile='/u01/app/oracle/product/10.2.0/db_1/dbs/init.ora'You are most likely using the wrong init.ora file. Get a list of files at /u01/app/oracle/product/10.2.0/db_1/dbs/
For the database ORACLE_SID that you are attempting to startup, there would be an initSID.ora or spfileSID.ora
e.g. if the ORACLE_SID is PROD, the file would be initPROD.ora or spfilePROD.ora
The spfileSID.ora is a binary file and should not be accessed by a text-editor.
Hemant K Chitale

Can we access Oracle 10g R2 database from Oracle 11g Client

Hi,
Can any1 tell me can we access Oracle 10g R2 database from Oracle 11g Client ? I m unable to find a Oracle Client 10g R2 for Windows 7 32 bit.
Below link is for Vista only
http://www.oracle.com/technetwork/database/10203vista-087538.html

832812 wrote:
Hi,
Can any1 tell me can we access Oracle 10g R2 database from Oracle 11g Client ? I m unable to find a Oracle Client 10g R2 for Windows 7 32 bit.
Below link is for Vista only
http://www.oracle.com/technetwork/database/10203vista-087538.html
Check this note for client/server compatibility
Client / Server / Interoperability Support Between Different Oracle Versions [ID 207303.1]

Cannot access Oracle BAM Start Page

Although Oracle BAM installation completed without any error and I can start BAM related services without any issue, I cannot access Oracle BAM Start Page because of the following error.
You are unable to connect to the Oracle BAM services. Contact your system administrator if the error persists. [ErrorSource="ActiveDataCache", ErrorID="ADCServerConnectionError"] The requested name is valid, but no data of the requested type was found [ErrorSource="mscorlib"] Debugging information: Oracle.BAM.ActiveDataCache.ServerUnavailableException: You are unable to connect to the Oracle BAM services. Contact your system administrator if the error persists. ---> System.Net.Sockets.SocketException: The requested name is valid, but no data of the requested type was found Server stack trace: at System.Net.Dns.GetHostByName(String hostName) at System.Net.Dns.Resolve(String hostName) at System.Runtime.Remoting.Channels.RemoteConnection..ctor(SocketCache socketCache, String machineAndPort) at System.Runtime.Remoting.Channels.SocketCache.GetSocket(String machineAndPort) at System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.SendRequestWithRetry(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream) at System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream) at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Oracle.BAM.ActiveDataCache.Common.Core.IDataStore.Exists(String strDatasetID) at Oracle.BAM.ActiveDataCache.Remoting.ServerWrapper.Exists(String strDatasetID) --- End of inner exception stack trace --- at Oracle.BAM.ActiveDataCache.Remoting.ServerWrapper.Exists(String strDatasetID) at Oracle.BAM.ActiveDataCache.SystemType.LoadSchema(Boolean bCache) at Oracle.BAM.ActiveDataCache.Context.LoadUser() at Oracle.BAM.ActiveDataCache.Context..ctor(String strDomain) at Oracle.BAM.Web.WebPage.CreateContext(String strUserName) at Oracle.BAM.Common.Threading.SynchedHash.GetObject(String strKey, Object oLock) at Oracle.BAM.Common.Threading.SynchedHash.GetObject(String strKey) at Oracle.BAM.Web.WebPage.GetContext() at Oracle.BAM.StartPage.StartUp.Initialize()
Do you have any idea ?
Although I checked ActiveDataCache.log, it is empty ( looks no problem ).
My environment as below.
OS : Windows 2003 R2 Enterprise Edition Service Pack 1
Oracle version : 10.1.0.2
Oracle BAM version : 10.1.2
Thanks in advance

Hi,
I've installed BAM 10.1.2 on Windows 2000 Professional. I have IIS 5.0 and Microsoft 1.1 .Net Framework installed on my PC. I'm able to use the Design Studio and Admin from Oracle BAM Enterprise Link. The installation completed successfully but I'm still not able to open the BAM start page.
I see the error:
Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error:
Line 263: 
Line 264: 
Line 265: <authentication mode="Windows">
Line 266:
Line 267: </authentication>
Source File: C:\OracleBAM\BAM\web.config Line: 265
I've checked that OracleBAM appears as a virtual directory in IIS (from Personal Web Server) and there were no errors in installation. The Access Permissions is set to 'Read' and Application Permissions to 'Scripts'
Should the authentication mode take any other parameters ?
Let me know what can be done to resolve this issue.
Thanks in advance !

How to access Oracle Using Dos Based FoxPro(2.5,2.6)

Hello Sir,
I need some clarification regarding the following question.
Q. How can access Oracle Database using Dos Based Foxpro of version either 2.5 or 2.6
Thanking you,
Kishore.P

Hi Alex,
the host and port depends on your network setup of your VM.
Do an ifconfig -a and see what IP adress your guest has.
With this IP address you should be able to access EM from outside your VM (but on the VM host, not from outside the network) with the same port.
Regards
Sebastian

How to access Oracle 8g from SQL Server 2005 SP3 EE 64 Bits ?

Dear All,
How to access Oralce 8g from SQL Server 2005 SP3 EE 64 Bits (liked server).
Best regards,
Miguel Gavinhos

Hi!
For the Oracle version is 8.1.6. what should I install, to access Oracle trought a linked server.
Best regards
Miguel Gavinhos

How to access Oracle Apps 11i forms from Virtual Machine(Vmware Player)?

Hi,
I have installed Oracle Apps 11i on native OS OEL5 Server and Windows XPP on Virtual Machine using Vmware Player on standalone same desktop.Now how to access Oracle Apps 11i from Virtual Machine(Windows XPP)?
Thank's
Regard's
Rerry

Hi,
Sorry my instance is PROD instead of TEST.
1)Renamed the sqlnet.ora and make the following change in the tnsnames.ora (SERVICE_NAME = PROD) to (SID = PROD) and tryed but same error.
2)Only one oracle homes on the cleint machine
3)The output of tnsping PROD
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>tnsping PROD 5
TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 23-FEB-20
10 00:38:40
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=tcp)(HOST=SHUBH.hnp.com)(PORT=1521))
TNS-12570: TNS:packet reader failure
Normal ping is ok from both host to guest and guest to host.
Thank's
Regard's
Rerry

Access Oracle 10g OLAP Analytic Worspace from BOE XI for Universes creating

Hi skilled!
Is there any environment to access Oracle 10g OLAP Analytic Worspace
from BOE XI (not from BOE XIR2) for Universes creating ?
Thank you.

Hello Walter,
Thanks for the response.
I'm using the following SAP GUI: 710 Final Release, Version 7100.2.7.1038, Build 971593, Patch-Level 7.
Trying to install the Desktop part of the integration kit results in the follwoing message: Unable to perform Desktop installation. The installation is unable to proceed with a desktop installation because Crystal Reports 2008 was not detected. To perform a Desktop installation, it must be installed.
Without having installed any integration kit on the client side, I can still see the data access driver for SAP Business Warehouse 3.x in the Universe Designer (when trying to define a new connection). After providing the respective parameters, however, a connection is not established successfully. When testing the connection it just tells me that the connection trial failed (SBO0001), without providing any further details.
What do you think, is the problem? The SAP GUI? Is it at all required for my purposes (generating OLAP universes in Designer from SAP BI) to install the integration kit on the client side? As far as I have read, it is?
Thanks, Konrad

Autonomy Oracle UCM connector to access Oracle UCM 11g

Hi,
How do I setup Oracle UCM 11g instance so that we can test the Autonomy Oracle UCM connector? Are there any specific configurations or do we need to install anything to make Autonomy Oracle UCM connector to access Oracle UCM 11g. Any help is appreciated.
Thanks

Autonomy sells a connector that will index items in Oracle UCM into the IDOL Server. You'll have to check with Autonomy on the versions supported and the cost. With this, you could get UCM information into IDOL just the same as you are doing with HTTPFetch and FileSystemFetch.
As for connecting UCM into the WLP Virtual Content Repository, there is not yet anything provided out of the box. However, you can implement your own CM SPI to provide this or you can wait for the product to provide it. It is my understanding that there will be a VCR integration via the CM SPI coming soon.
Finally, BEACMRepoFetch is basically a pre-configured and privately used instance of FileSystemFetch. This is used by the BEA Content Repository to populate the IDOL Server index for full text searches coming through the VCR full text search API.

Access Oracle database on ARM platform

Hi
I am trying to access Oracle database on ARM platform.
Is anyone has experience about that?
It seems that the instance client has no ARM version.
Thanks for any suggestion.

Pro*C and oci are cool but I recomend the Oracle Template Library.
It is much simpler and easier to use.
It is just one .h file which includes a set of classes which are a thin wraper over oci.
Try it, you don't know what you are missing.
(That goes for the oci and pro*c advocates too :)
http://www.geocities.com/skuchin/otl/home.htm
null

Permission required to access oracle client service names

Hello,
I actually have a problem with accessing oracle client service names in Crystal.
The problem is:
I installed crystal reports 2008 and installed oracle client on a machine (I used an account that is a local administrator of the machine during installation) but the problem is that the users who are going to access crystal are standard users and they couldnu2019t access the services in oracle client and when they try to refresh the report they get the following error
"Failed to load database information. Details: the DB connector 'crdb_oracle.dll' couldn't be loaded. the correct version of the database client for this database type might not be installed"
I gave the users permission on the two folders (C:\program files \Common files \) and RegEdit : (C:\Windows \ System 32\) but the problem wasnu2019t solved so I made them local administrators and the problem was solved but I donu2019t want to make the users local administrators on the machine , some people told me that I have to install oracle client with the user who will be using crystal but the problem is that two users will be working on the machine not just one and they have two different accounts and when I tried to give the users full control permission on oracle folder , the problem wasnu2019t solved, So I wanted to know if any one faced a similar problem and how to solve it without making the users local administrators.
Thanks in advance.

Hello,
It appears you have everything installed and configured for Cr to work so it looks like it's a DB issue.
What do you see in the logs if you enable logging on the Server? Are your requests even getting to the Server from CR under the user account?
Test it using the admin and then the user account.
You could try checking on the option to use Trusted Authentication in the database log on windows of CR. This should pass the users PC log on credentials to the Server.
Thank you
Don

How to supress the Oracle version in Reporting

Hi All,
I am trying to run an .sql file
spool aPOORVA_TEST.log;
SET ECHO Off;
SET DEFINE OFF;
set feedback off;
set heading off;
set line 5000;
SELECT * FROM table WHERE ROWNUM<3;
Spool Off;
The output of this query is showing the Oracle Version along with the query result
SQL*Plus: Release 9.2.0.6.0 - Production on Fri May 8 04:11:13 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
How could i remove these which SET command is going wrong. Please advise.

Do you have a
sqlplus username/password@database command somewhere in the .sql file? How are you running the .sql file?
After logging into the SQL*Plus console?
If you are using sqlplus command in the sql file, then just suppress the ouput with -SILENT option or -s.
Cheers
Sarma.

ACCESS 97 & ORACLE VERSION 7

Similar Messages

Maybe you are looking for