Access denied Error when trying to run Tomcat that came with JWSDP

Hi fellows,
I went through the forums and found same error posted by someone but no soultion to that.
So hope this time i get lucky.
I am running this on win 98(it really sucks)
After I try to run the startup.bat i get the error:
Using CATALINA_BASE: C:\JWSDP-1_0-EA2
Using CATALINA_HOME: C:\JWSDP-1_0-EA2
Using CATALINA_TMPDIR: C:\JWSDP-1_0-EA2\temp
Using JAVA_HOME: C:\JDK13~1.1_0
Access is denied.
I don't know where to put the build.properties. Any helpful comment will be greately appreciated.
Regards,

Folks
Obviously the EA(Early Access) is just that! I've managed to get around the problem, and run a sample (ConverterBean) using JWSDP with Tomcat on Win98. Here's the workaround:
1> In the startup.bat, replace "start" with "run". Type "startup" from cmd line. This will start Tomcat in the same window.
2> Create the build.properties file in the same location as build.xml. For the Getting Started example, this will be in <jwsdp-home>\docs\tutorial\example\gs.
3> Once you build the sample files, copy the classes directory and index.jsp to <jwsdp-home>\webapps\ROOT\WEB-INF
4> Update setclasspath.bat in <jwsdp-home>\bin directory to include <jwsdp-home>\webapps\ROOT\WEB-INF\classes.
5> In the browser, type http://localhost:8080/index.jsp
BINGO!!!!
Cheers!
Pravin
I hava the same problem
Using CATALINA_BASE: C:\JWSDP-~1
Using CATALINA_HOME: C:\JWSDP-~1
Using CATALINA_TMPDIR: C:\JWSDP-~1\temp
Using JAVA_HOME: C:\J2SDK_FORTE\JDK1.4.0
Zugriff wurde verweigert. (access is denied)

Similar Messages

Access Denied error when trying to print over the network

I just upgraded my Internet service and leased a new modem. My laptop is connected to the network and is able to browse the Internet. I have file and printer shared tuned on on both the desktop and the laptop. The printer is listed on my laptop, but I cannot print over the network to my HP PSC 1401 All In One. I get an Access Denied error even though the printer should still be connected to the network.

bump

Access Denied Error when trying to do a Search

Hi,
We are using the BP for CRM 5.0 and we are facing that the iviews are working but when we go into ie. a new Service Order and in one field we click on the icon to do a search of the value to fill in the text field, we are getting this error:
Access denied (Object(s): portal_content/com.sap.pct/specialist/com.sap.pct.crm/com.sap.pct.crm.roles/com.sap.pct.crm.core.defaultservices/com.sap.pct.crm.core.valuehelp).
Exception id: 09:51_13/09/07_0001_3889050
See the details for the exception ID in the log file
When we add Administrator permisions to the user this is resolved but the consern is why other iviews of the BP are working but the portal_content/com.sap.pct/specialist/com.sap.pct.crm/com.sap.pct.crm.roles/com.sap.pct.crm.core.defaultservices/com.sap.pct.crm.core.valuehelp is not working with the user profile?
has somebody suffered this?
I was trying to go into the log to find the error ID but can´t find the log that has to be analized, I didn´t find a log that has that ID or some ID´s like that one, can somebody guide me into this one to?
Thanx In Advanced!!
Kind Regards!
Gerardo J

Hi Ahmet,
The issue was solved assigning permissions to the Role CRM Default Services, try giving Read permisions to your users on this role, I did this assigning the Role where my users are to have permisions into CRM Default Services.
I hope this can help!!
Kind Regards,
Gerardo J

Access denied. When trying to upload files into SharePoint with PowerShell

AM trying to upload a bunch of files into SharePoint using PowerShell. I have a code that works on my local machine, but when I get on the server, it does not. Here is what my block of code looks like
$webUrl = "http://SampleSite"
$libraryName = "My Lib"
$docLibraryUrlName = "My%20ContentType"
$fileLocation = "C:\test\"
$contentType = "My ContentType"
#Open web and library
$web = Get-SPWeb $webUrl
$docLibrary = $web.Lists[$libraryName]
$files = ([System.IO.DirectoryInfo] (Get-Item $fileLocation)).GetFiles()
ForEach($file in $files)
#Open file
$fileStream = ([System.IO.FileInfo] (Get-Item $file.FullName)).OpenRead()
# Gather the file name
$FileName = $File.Name
#remove file extension
$NewName = [IO.Path]::GetFileNameWithoutExtension($FileName)
#split the file name by the "-" character
$FileNameArray = $NewName.split("_")
#Add file
#$folder = $web.getfolder($docLibraryUrlName)
$folder = $web.getfolder($docLibrary)
write-host "Copying file " $file.Name " to " $folder.ServerRelativeUrl "..."
$spFile = $folder.Files.Add($folder.Url + "/" + $File.Name, $fileStream, $true)
$spItem = $spFile.Item
#populate metadata
$spItem["First Column"] = $FileNameArray[0]
$spItem["Second Column"] = $FileNameArray[1]
$spItem.Update()
$fileStream.Close();
Again, this code works fine on my local machine but doesn't when I move this to the server. When I step through the code, I noticed that when I look at the data returned for my $folder variable in this snippet
$folder = $web.getfolder($docLibrary)
It shows the EffectiveRawPermissions to be "Open, BrowseUserInfo, UserClientIntegration" on the server...however, the EffectiveRawPermissions on my local machine is "FullMask". Does this have any effect on the ability of my code to be
able to upload the files into SP on the server? I have never run into this issue, so am not sure how this makes sense...so I really appreciate any insight. Thanks
I am getting this error when the code attempts to perform the "Add" function...
Exception calling "Add" with "3" argument(s): "<nativehr>0x80070005</nativehr><nativestack></nativestack>Access denied."
At C:\PowerShellScripts\tester.ps1:70 char:3
+ $spFile = $folder.Files.Add($folder.Url + "/" + $File.Name, $fileStream, $true ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : UnauthorizedAccessException
...Please help

RunWithElevatedPriv basically impersonates the webapp's app pool account, which should have full control over the entire webapp... this would work, but is not recommended for several reasons:
- first and foremost, you shouldn't NEED to bypass the SP security model
- second and still important, the app pool may be hosting other webapps as well, so the risk of a bug causing security-related problems within the RunWithElev codeblock is no longer scoped to the current webapp, but also other webapps that share the same
app pool account.
- third, same as number two, but for service accounts, and possibly even the farm... not a good practice, but a lot of SP installs aren't configured correctly, so the entire farm may be using one account... now, the RunWithElev is not just a webapp admin,
not just a multiple webapp admin, but may be able to affect service apps, or possibly the entire farm.
- fourth, the audit info (created by, modified by) will reference the system account, instead of your account... not a very accurate audit trail in that case.
If you have a legit need to add the files, you should be able to get the necessary permissions (which is basically just contribute within the library / folder) easily enough.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

My executable compiled with Real Time Engine 5.1.1 in App Builder gives error when trying to run in App Builder with RTE 6.1

Hello. I built an executable using App Builder in LV 5.1.1 and now, years later, I am trying to run it in LV 6.1 but I get an error stating a requirement for Run Time Engine version 5.1.1. To be able to run this, must I install the older version of Run Time Engine? If so, where can I find the older version? Do I have to install the older version of LabVIEW to get the RTE? Will having both versions on my pc be a problem?
I assume that once I am able to run the exe, that I will be able to recompile with the newer version of the RTE using App Builder. Is this correct?
I have been away from LabVIEW for several years and am a bit rusty on these details that I once knew. Any help is appreciated.
Alex

The version of the run-time engine must match the version of LabVIEW that was used to create the executable. You can get any version of the run-time engine you want here. The only way to create a version 6.1 exe is to re-build it from the source code with diagrams. An exe has no block diagram so it cannot be converted to a newer version.

Win 7 PC wireless network "ACCESS DENIED" error when trying to save a scan from MX450 printer

Problem solved (by Canon Support).
thanks all.
Bye
Chris

Hi cherft,
Glad to hear that you resolve this issue. Could you Please share the solutions with us?
It will be very beneficial for other community members who have similar questions.
Thank.
Yolanda Zhu
TechNet Community Support

Error when trying to run an application that worked when built with 8.6

I have a simple program that I wrote in version 8.6 that I never had a problem building and running applications built with it in 8.6. Two weeks ago I got 2009 in the mail because we had very recently purchased 8.6 and I am getting errors when trying to run an application built with the same code using 2009. The error has to do with the Mean.vi. It claims it cannot find it. The error I get reads as follows:
An error occurred loading VI 'NI_AALBase.lvlib:Mean.vi'. LabVIEW load error code 3: Could not load front panel. I don't need access to this vi's front panel, so I am wondering if it is a problem with the runtime engine and not my code. Please respond as soon as possible as this will quickly start to impact my testing schedule. Thank You.
Solved!
Go to Solution.

Hi!
The same problem ???
I discussed it with my local NI technical support team. The application works without any problems now.
Basic rule: when creating an installer be sure that option "Run Time Engine xxxx" in "Additional Installers" category is checked in spite of the fact that Run Time Engine is already installed.
Best regards.
Attachments:
ADDINST.png ‏13 KB

Access denied error when starting DIAdem from LabVIEW

We are using the DIAdem Connectivity Toolkit in our application. Our application starts a DIAdem session to handle querying and datasheet creation. On a recent installation at a customer, our application was not able to communicate with DIAdem, i.e. we get an Access Denied error when our application tries to start up DIAdem.
The location of the error is in the DIAdem Open Connection.vi. I believe it is when the Automation Open is run.
Is there some system setting that could be blocking communication between the two, i.e. ActiveX setting, etc? If so, where could we control these settings from?

Hello Derrick,
While cBauer is away from the office, I will be working with this case on his behalf. I will try to answer your questions as best I can to determine what might be causing this failure.
1. The error which we encounter is an "Access Denied" error (as stated above). I am currently investigating the error code, and will update this post accordingly when I have it.
2. Our application is a built (.exe) application using LabVIEW 8.5 and DIAdem 10.2
3. We do not install the toolkit directly on the customers machine as this is a built application. We install the FULL LabVIEW 8.5 Runtime engine, as well as a licensed copy of the DIAdem 10.2 Basic edition.
4. The error occurs in run-time environment at a customer site. We have been unable to duplicate the error in development.
5. We're using the "DIAdem Open Connection.vi" from the DIAdem.dll library to initialize the connection (this is the VI which appears to be producing the error via the "Automation Open" node), and we're using the "DIAdem Close Reference.vi" from the same library to close the reference.
6. I will instrument a simple application which performs these tasks and post the results when we have tried this operation.
7. I am unsure whether the repair operation has been attempted. I will verify this behavior and again post the results to this forum.
Thank you for your help. Please let me know if you require additional information. Hopefully we can discover a solution to our problem.
Ken

Access Denied Error when Installing Suitcase

I am encountering an Access Denied Error when installing Suitcase X1 on a 600 MHz G3 ibook running 10.4.3 with all updates and it gets to 2 items remaining to be installed and I get access denied error and then another screen pops up and says "You do not have enough access privileges for this installation". I am logged in as an administrator, I tried creating a new Administrator account, I have repaired permissions, I have tried downloading a new file, all with no luck and now I am stuck. Any ideas?
G3 Pismo, G4 Desktop Mac OS X (10.4.3)

Hi,
Firstly, please let us know if it is a workgroup or domain environment.
Also, please let us know more details about the configurations of the server and clients.
Meanwhile, you can check the settings by referring to the following:
Allow someone to connect to your computer using Remote Desktop Connection
http://windows.microsoft.com/en-HK/windows7/allow-someone-to-connect-to-your-computer-using-remote-desktop-connection
Remote Desktop Connection: frequently asked questions
http://windows.microsoft.com/en-hk/windows/remote-desktop-connection-faq#1TC=windows-8
If issue persists, please provide us the unedited error message or screenshot for further research.
Thanks.
Jeremy Wu
TechNet Community Support

HT4796 I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
Is this the only site you have problems with ? and does Safari work ok ?
Often this problem requires the page to be reloaded
* try pressing the shift key as you reload the page
Another problem is sometimes the cookies for that site need clearing
* see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
* see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]]

I get an access denied error when logging into extension builder 2.1 on Flash Builder 4.6

I get an access denied error when logging into extension builder. The error is: You are not eligible to use CSIDE1 services due to the Service Eligibility Requirements.. Very frustrating since there is no other option than to read the adobe legal docs.
Before this started happening I was prompted to put in my birthday (WHO KNOWS WHY ADOBE NEEDS MY BIRTHDAY). I filled it in wrong and now this....
PLEASE HELP

Ok this problem is fixed.
Info for anyone else who faces this problem.
Apparently when adobe designed the extension builder installer package, they decided to get cute and try to figure out what version of the software, the extension builder package files should be installed into. So if you have FB4, FB4.6, and FB.7 there is no telling where it will go. Also if you try moving these folders somewhere else out of the applications directory, the installer will still find them on the system. I finally figured this out by watching my system log and seeing
11/22/13 12:13:46.258 AM cp[70909]: Cannot make directory /Applications/Adobe Flash Builder 4.6/Adobe Flash Builder 4.6.app
Location: /Users/myuser/Downloads/Adobe Flash Builder 4.6-adobegarbage/plugins/com.adobe.cside.ui_2.1.0.201304282312/icons: No such file or directory
After removing every single instance of places the package installer was trying to use. It finally resolved to the correct FB4.6 location. Why adobe could'nt spend a little extra time add a destination selector in the package installer is beyond me, but hey i only wasted 3 days trying to figure this out.... Sadly it isnt the first time i've wasted copius amounts of time fighting Flashbuilder problems.
Halligrimur, thank you for your help. It did lead to me solving the problem.

App File Server connection error when trying to run a BI Publisher report..

hello Gurus...
As above - App File Server connection error when trying to run a BI Publisher report.. FOR THE FIRST TIME.
What does our DBA need to do..?
error message reads..
Template code: SUARXASR
Template app: AR
Language:      en
Territory:     GB
Output type:   EXCEL
[5/10/10 10:59:27 AM] [UNEXPECTED] [46321:RT1487572]
oracle.apps.fnd.cp.util.RemoteFileException: An error occurred while attempting to establish an Applications File Server connection with the node FNDFS_*****.ac.uk. There may be a network configuration problem, or the TNS listener on node FNDFS_*****.ac.uk may not be running. Please contact your system administrator.
at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:241)
at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:194)
at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:130)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:264)at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
[5/10/10 10:59:27 AM] [46321:RT1487572] Completed post-processing actions for request 1487572.I'm sure we never had to set anything up in our Test instance!??!!??
many thanks for looking..
Steven

nobody experienced this before..?

I'm getting a -2003F error when trying to run the internet recovery after installing a new hard disk in my macbook pro, any suggestions?

After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?

Did you format the new HDD? What is the status of the old HDD?
Do you have an early or late 2011 MBP?
Ciao.

Error when trying to run Advisor

Hi!
I get the following error when trying to run the Advisor (Application Builder > Application xxx > Utilities > Advisor) over our application:
Unknown type! View: APEX_APPLICATION_PAGE_PROC Column: CONDITION_EXPRESSION1 Value: WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED
... this happens every time, even if I uncheck all boxes except one (e.g. "References with substitution syntax").
I'm wondering if there is something wrong with our Apex installation as I can't see any other references to this problem in the forum. We don't seem to be suffering any other problems so I expect it's something small...
Has anyone else ever encountered this and does anyone know of a solution? I would like to use the Advisor for some QA processes as it looks like a handy tool.
Many thanks in advance,
Alex.
Versions:
Apex 4.1.1.00.23
Oracle DB 10.2.0.2

Hi Alex,
very interesting. Looks like one of your processes uses the WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED condition which has been deprecated for a very long time.
If you execute the following query in your workspace schema, you should find those processes which do use the condition. You might want to check if the reported pages/processes are still used in your application.
select application_id,
       application_name,
       page_id,
       page_name,
       process_name
from APEX_APPLICATION_PAGE_PROC
where CONDITION_EXPRESSION1 = 'WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED';Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Today my iPad says network error when trying to run amazon instant video...

Today my iPad says network error when trying to run amazon instant video... I fooled it into starting the movie, but the error message continues...

What you need to do is go into settings
Then go to wifi
Tap the blue arrow to the wifi you are connected to
Tap forget network
Retap the wifi you want
Reinsert your wifi code if you have one

Access denied Error when trying to run Tomcat that came with JWSDP

Similar Messages

Maybe you are looking for