Access denied to Citrix using Safari (error code 7)

I have previously been able to access my Citrix work server from home using Safari. This is no longer possible following update to 10.4.9. When attempting access I get the following message:
"A local security certificate could not be loaded (error code 7)".
From the web it appears that other Mac users have also encountered this problem with Citrix. A Citrix administrators' site suggests reseting Java in preferences to an earlier version. I'm not clear how to do this and from previous experience changing things in Java setups is a bad idea.
Has anyone found a practicable solution?

Folks,
I faced a similar problem when trying to move a NTFS formatted disk from XP to windows 7. I tried suggestions on various forums but nothing worked. Finally though, i was able to identify the root cause empirically and fix it.
1. In my understanding, Windows 7 interprets the permissions on a NTFS drive very strictly. Hence while a NTFS HDD with tweaked security settings - say with only administrator access/ownership under security tab may work perfectly in XP, OS X, Ubuntu etc
, Win 7 will show you access denied unless permissions for ALL of the following: AuthenticatedUsers, SYSTEM, Administrator & Users is set correctly (which is default for a newly formatted drive in windows)
2. You can do this either manually by adding these one by one or by simply formatting the drive (this however is destructive for data).
3. I therefore simply set the permissions correctly AFTER taking ownership of the drive and I was able to access the drive just fine.
4. To prove that its merely a permission issue where Windows 7 is arguabily behaving correctly, before making any permission changes, try booting your computer in Safe Mode and you should be able to access your data just fine while you are in the Safe Mode.
5. Lesson for me was to be very careful with NTFS permissions, especially while removing those present by default.
6. I managed to solve the issue before seeing this thread. Hence i do not know if "foreign drive" solution below would have worked in my case.
To Microsoft: This solution should be WAY more easier to find on the net. Hell, its shouldn't even be a be a problem! Windows should be able to reset the permissions to default with a single click on a non encrypted NTFS drive if the person trying to do this
has the administrator access.
Hope this allows people to save time and data.
Cheers!

Similar Messages

  • How do I fix Safari error code 3014?

    How do I fix Safari error code 3014?

    Debug console is mainly for use by the website developer to debug their own sites - so unless you are trying to debug your own site then I'd leave it switched off.
    All versions of iOS 5 have been available for the first gen iPad, it's iOS 6 that you can't update to on it. If you want to update to iOS 5.1.1 (the highest version that it supports) then you should be able to do so via your computer's iTunes : https://discussions.apple.com/message/22061024#22061024

  • I need to access a website that uses Safari 5.0. I'm using 5.1 and OS 10.6.8 and would like to install 5.0. I do not have time machine installed so I cannot go back and reinstall. Any Suggestions?

    I need to access a website that uses Safari 5.0. I'm using 5.1 and OS10.6.8. I do not have Time Machine activated - so I cannot go back and reinstall Safari 5.0  that way. Any suggestions?

    Safari 5.1.9 and Java 6 are the latest versions available for OS X 10.6.8. To upgrade any further you would need to upgrade to Mountain Lion (OS X 10.8.4) through the Mac App Store.
    http://www.apple.com/osx/how-to-upgrade/

  • Build error when using custom error codes

    When I try to build my application using custom error codes I receive the following error:
    Error 1 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
    Possible reason(s):
    LabVIEW:  An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
    =========================
    NI-488:  Command requires GPIB Controller to be Controller-In-Charge.
    C:\Program Files\National Instruments\LabVIEW 8.5\user.lib\errors\BPMS-errors.txt
    This only occurs the first time I attempt to build my application. If I build again immediately after receiving the error, everything works fine. My custom error codes were created using the provided editor, and I have included the file in my project. I have also checked the "Copy error codes" box in the advanced build specification settings.

    Hi Donovan,
    The attached project is giving me the error previously discussed. Thanks for your help.
    Attachments:
    BuildError.zip ‏10 KB

  • ".. access denied: ... jnlp read" error in applet with NO .jnlp file!

    I'm trying to embed a Java program called ImageJA [http://pacific.mpi-cbg.de/wiki/index.php/ImageJA] into a webpage. I'm using ASP.NET with XHTML 1.0. Since I'm embedding it as an object in the html code, it should not cause any issues from that end. Unforunately, when I try I get an error saying "java.security.AccessControlException: access denied (java.util.PropertyPermission jnlp read)". The weird thing is, there is no jnlp file anywhere (including the .jar and codebase).
    I'm able to run it successfully if I change the permissions in my java.policy file, but that solution only works for my local machine.
    The .jar file (the only one) has been signed (I believe). I followed the steps as suggested [http://download.oracle.com/docs/cd/E17476_01/javase/1.4.2/docs/guide/plugin/developer_guide/rsa_signing.html], with the exception of contacting VeriSign/Thawte (I wish to have this be self signed).
    This seems like a very odd issue to me, and I'm running out of hair. Can anyone help?
    Here's my html code:
    <html xmlns="http://www.w3.org/1999/xhtml" >
    <head runat="server">
    <title>Untitled Page</title>
    </head>
    <body>
    <form id="form1" runat="server">
    <div>
    <object
    classid = "clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
    codebase = "[http://java.sun.com/update/1.5.0/jinstall-1_5-windows-i586.cab]"
    width="500" height="500">
    <param name = "code" value = "ij.ImageJApplet.class" />
    <param name = "codebase" value = "ImageJA" />
    <param name = "archive" value = "ij-1.44a.jar" />
    <param name="type" value="application/x-java-applet;jpi-version=1.4.2" />
    <param name="scriptable" value="true" />
    </object>
    </div>
    </form>
    </body>
    </html>
    Edited by: Sythion on Jul 13, 2010 2:19 PM

    Sythion wrote:
    I'm trying to embed a Java program called ImageJA [http://pacific.mpi-cbg.de/wiki/index.php/ImageJA] ..
    I suggest you take up the problem through the [channels suggested by the API developers|http://pacific.mpi-cbg.de/wiki/index.php/Help:Contents].

  • Error accessing file template file not found (error code 2)

    We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
    When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
    I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
    When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
    Any help would be appreciated.
    Thanks

    We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
    When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
    I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
    When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
    Any help would be appreciated.
    Thanks

  • Opportunity - Access denied.(SBL-DAT-00284) Error

    I am getting error as Access denied.(SBL-DAT-00284) when I am trying to create a new opportunity record.
    I checked Roles and access profile. Setup looks correct there. Any idea of issue. Thanks VK

    I was access profile issue. I resolved. Thanks VK

  • I cannot access iTunes Store due to an error code 0x80090318. Please help!

    I cannot connect to iTunes Store. I tried re downloading, it's OS windows 8.1
    Please help!

    Type that Error code into the Search window... Top right

  • Cannot open/view/access interactive pdf form using Safari

    I was unable to open interactive pdf forms from websites with Safari 6 on my iMac. I received the following message:
    Quote
    To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html
    For further support, go to www.adobe.com/support/products/acrreader.html
    Unquote
    I still couldn't view/open/access the form even after I upgraded to Version 11.0.04 of Adobe Reader.
    This problem happens only (I believe) after I updated OS X and Safari. Previously I was able to do it without any trouble as recently as July 2013. However, I don't encounter any issue if it is just an ordinary pdf document especailly if it can be downloaded to be opened later.
    As far as I can ascertain, I don't have any plug-in except for McAfee SiteAdvisor 2.0, 1Password 3.9.0, AdBlock 2.5.46 (which is disabled), Evernote Web Clipper 5.7, and Open In Internet Explorer 1.0 (by Parallels).
    I am using OS X Mountain Lion 10.8.5 and Safari 6.0.5 (8536.30.1).
    Can anyone please help? Thank you.

    Thank you, Carolyn Samit and andyBall_uk, for your prompt responses and suggestions.
    Although I didn't follow your recommendations, they gave me some idea regarding what to do to resolve the issue.
    The solution is actually very simple. I uninstalled my existing Adobe Reader (using CleanMyMac 2 but I believe moving the app to trash should do it as well), downloaded a fresh copy (version 11.0.04) and reinstalled it again. When the software was being installed, it asked whether I wanted to make Adobe Reader (AR) the default PDF reader. I indicated OK and allowed installation to proceed and finish.
    After installation of AR, I reopened Safari and went to a website to click the link to the pdf form. And lo and behold, I was able to open/access/view the document! It worked with a second website.
    So the lesson is when installing an upgrade remember to make Adobe Reader the default PDF reader.
    I hope that this procedure can help others resolve their issue if they have a similar problem.

  • Login Access denied due to licenses check error

    Hi,
    User can not login to application server. Error message is u201CLogon is notpossible (Error in license check).
    Permanent license is installed on system. Access was possible till
    couple of months back. Suddenly it started throwing this error.
    This is in High availability environment.
    I can able to login using sap*.
    Status is green in new license in tcode slicense.
    Please guide.
    Regards
    Yogesh Cheulkar

    Hi Yogesh,
    I faced the same issue before .
    It is a database related issue. Your log files are full and that causes this issue. Please check your Archieve log ( If you are using Oracle ) or Transaction log (In MS SQL) .
    Free up some more space in log drive and that will resolve your issue .
    You can take a fresh Transaction log (MS SQL) file backup or archieve log backup (Oracle) to free up the space.
    Try it and it will resolve the issue .
    Best Regards,
    Nibu Antony

  • Why do I get "can't access device" message while using Safari?

    I am traveling in Mexico with my friend who has a Sony Vaio running Vista. I have a white MacBook (early 2008) running OS X 10.5.6. We choose hotels offering wireless internet, and my friend has no trouble anywhere, where I have trouble everywhere. BIG disappointment, since I'm always bragging on Apple. I have the feeling I my have done something dumb with the internet connection utility in "System Preferences"- could that be it?
    Some questions about what has been happening:
    A) why does "internet" (the utility in sys pref) sometimes tell me that I am connected when Safari says I am not?
    B) Other times it tells me I'm not connected when Safari is the process of connecting successfully.
    C) Why does it say I need a password when I don't? THIS IS THE MOST CONSISTENT MISTAKE IT MAKES
    D)When I do need a password it often says "password invalid" when I type correct one.
    E) I get "could not open communication device" WHILE Apple.com is actually loading! and even after I have been using it for 5 or so minutes.
    Finally, if I have to re-install Safari, can I do it on line? (provided I can get on line).

    Try resetting the App Store.
    App Store Reset       Learned from Old Toad

  • Can't use Safari - Error message saying it's too new for my OS.

    I was prompted to update Safari and once completed I could no longer use it. Everytime I open it now it says it's too new for my OS X. Is this forcing me to get Snow Leopard? Can I rollback to the previous one? I've tried re-installing but it still does not work.

    Yes you can get the earlier version. The link for the download is below.
    http://support.apple.com/downloads/Safari3_2_3_forLeopard

  • Class not found error while using ikvm error code IKVMC0100: class "javax.b

    hi iam writing a java application which uses bluetoth i.e. javax.bluetooth;
    now i need to create exe for c# i.e. my GUI is C# and business logic is java,
    so these are steps i have followed
    * created a java project (iam using netbeans 6.1)
    * after build i used command prompt and travesed to dist of my project location which contains jar
    * here i typed ikvmc my.jar
    but now it says the following it also contains others but one of such is
    Warning IKVMC0100: class "javax.bluetooth.LocalDevice" not found
    it also creates exe but if use that in my c# then raises the exception...
    so please help me.. what is the solution for this....

    If you have the SDKPanel sample, you have a Flex sample and debugging information. Please let me know (off-forum) what you're buildng, and we'll make sure your dev environment is configured correctly.

  • QuickTime.cab is corrupt and cannot be used.  Error code 2350

    I just bought a brand-new-in-a-box iPod - haven't even opened the box yet. I tried downloading/installing iTunes. I got the errors listed above.
    At first, I didn't even have QT installed so, I tried just downloading and installing QuickTime. That went fine.
    Then I tried (again) to install iTunes with the exact same result. I thought everything macintosh/apple was supposed to be just wonderful, bring about world peace, etc. Grrrrr....

    Try deleting the contents of your temp folder
    C:\Documents and Settings\<username>\Local Settings\Temp
    Then redownload the iTunesSetup.exe file.
    Does that work?

  • IOS7 Safari error Code: "invalid Input Data. No javascript allow." On payment by Credit cards. Pls help

    Its Not possible to make any payment by Credit Card. After filling in the Data Form and continuing to finish the payment an error window appears Witz the Text " invalid Input Data. No javascript allow..."  Orher Browsers are working well.
    How can i fix this Problem

    Its Not possible to make any payment by Credit Card. After filling in the Data Form and continuing to finish the payment an error window appears Witz the Text " invalid Input Data. No javascript allow..."  Orher Browsers are working well.
    How can i fix this Problem

Maybe you are looking for

  • BR0278E   - Access denied in oracle backup and redolog backup

    Hello All, I have been trying to take a redolog backup from DB13 and I am getting the below error BR0278E Command output of 'E: && cd E:\oracle\QAS\102\database && E:\usr\sap\QAS\SYS\exe\uc\NTAMD64\brtools.exe -f copyfile 12.6.2.0\Backup\hostname\QAS

  • Is it possible to use the ipad to access a mac mini running mountain lion and back to my mac?

    Is it possible to access a mac running mountain lion using Back to my Mac?

  • ICal Help

    I don't need my desktop computer (iMac 2GHz Intel Core 2 Duo- still running Snow Leopard-10.6.8)  to give an alarm. When, in iCal preferences, I click the little ? mark I get the message "Helpviewer cannot open this content". I get the same messsage

  • Help with a very basic GUI

    Hi guys, i have a project to do and Ive chosen hangman. Ive already made the main program , but i need help with the GUI. I havent been taught about GUI in school, so all i know is what i could understand from a book and what ive read on the internet

  • Why are episodes missing?

    I purchased seasons 1-3 of ER.  I've now ventured into season four and its per episode.  I'm not sure why.  I looked at the list and I see episodes missing.  I've tried internet searches to find out why, but came up short.  I see that this issue is r