"Access denied. You cannot log on to an older version of the CMS"

Post Author: dnaman
CA Forum: General
Hi All,
I recently installed Crystal Reports XI (11.0.0.1282) on my desktop and am trying to save a report to Crystal Enterprise 10. When i try to save it, i get the error above - "Access denied. You cannot log on to an older version of the CMS".
Is it possible to connect to CE 10 with CR XI or do i need to get CR 10 as well? I would have hoped there would be backward compatibility.
Thanks in advance,
dnaman

Hi,
CR 2008 is not compatible with BOE XI R2. The Crystal Reports 2008 report designer is unable to log into XI Release 2 or older servers.
The functionality that depends on an enterprise session is unavailable. If you are using one of these report servers(CRS XI/XIR2 or BOE XI/XIR2), we recommend you use the Crystal Reports XI or XI Release 2 report design tool.
The corresponding server for Crystal 2008 is BO XI R3 which will support all the new functionalities present in Crystal 2008.
I hope this helps you.
Regards,
Prashant.

Similar Messages

I get an access denied error when logging into extension builder 2.1 on Flash Builder 4.6

I get an access denied error when logging into extension builder. The error is: You are not eligible to use CSIDE1 services due to the Service Eligibility Requirements.. Very frustrating since there is no other option than to read the adobe legal docs.
Before this started happening I was prompted to put in my birthday (WHO KNOWS WHY ADOBE NEEDS MY BIRTHDAY). I filled it in wrong and now this....
PLEASE HELP

Ok this problem is fixed.
Info for anyone else who faces this problem.
Apparently when adobe designed the extension builder installer package, they decided to get cute and try to figure out what version of the software, the extension builder package files should be installed into. So if you have FB4, FB4.6, and FB.7 there is no telling where it will go. Also if you try moving these folders somewhere else out of the applications directory, the installer will still find them on the system. I finally figured this out by watching my system log and seeing
11/22/13 12:13:46.258 AM cp[70909]: Cannot make directory /Applications/Adobe Flash Builder 4.6/Adobe Flash Builder 4.6.app
Location: /Users/myuser/Downloads/Adobe Flash Builder 4.6-adobegarbage/plugins/com.adobe.cside.ui_2.1.0.201304282312/icons: No such file or directory
After removing every single instance of places the package installer was trying to use. It finally resolved to the correct FB4.6 location. Why adobe could'nt spend a little extra time add a destination selector in the package installer is beyond me, but hey i only wasted 3 days trying to figure this out.... Sadly it isnt the first time i've wasted copius amounts of time fighting Flashbuilder problems.
Halligrimur, thank you for your help. It did lead to me solving the problem.

Can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.

Hi,
I can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action. I can access CRM with same user id and password from our office inside the network. I can get
the page to give login details once I have login details I got below error. Please help me to solve this issue. It was working before.
Access denied You do not have sufficient access rights or privileges to perform this action.
Regards,
Noushad
[email protected]

On Premise system Configured with AD FS server for claims-based authentication you need to update your host file with server url to access it from outside office network.
Refer
this on how to update host file.
Regards, Saad

XI Integration Engine- You cannot log on to system BS_SAP_R_3 with user XIR

I have given the correct user name and password while creating RFC destination and Port.
And I see wrong user ID/password in ping status.
Ping Status: You cannot log on to system BS_SAP_R_3 with user XIRWBUSER
Last Retry Thu Jan 18 23:13:47 UTC 2007 .
Can anybody guide me on this?
Thanks
Chiru

Hi,
I have correct user id/ password in RFC destination. I do not know why in Runtime work Bench it is showing the wrong userid/password.
I forgot to give it at the first time and later I gave the user details.
And in Runtime work bench this error is not going away.
Any help on this?
Thanks
chiru

This database was connected to a Microsoft Access Services site that is not compatible with this version of Microsof Access. You cannot make design changes or modify data in database.

Hello All,
I am getting this error while I am connecting my access database website for the change
"This database was connected to a Microsoft Access Services site that is not compatible with this version of Microsof Access. You cannot make design changes or modify data in database."
I am using SharePoint 2010 and Microsoft Office 2010.
I have created one Contact Database Site and now I am trying to modify the layout of the form in Access. and I am getting the error that I have mentioned.
Please provide help on it.
Thanks in Advance....

Hello All,
I got the answer, we have to enable the port 80 or where the access service is deployed and we have to change Trust setting and also, enable the macro from Access.
Hope this will help to other....

I get this message on my Facebook news feed when someone posts a YouTube video. Don't know why. It's worked fine for years. I am using Safari on my iPad. If I use the Facebook app it works fine. Any thoughts. Thanks, Access Denied You don't have

I get this message on my Facebook news feed when someone posts a YouTube video. Don't know why. It's worked fine for years. I am using Safari on my iPad. If I use the Facebook app it works fine. Any thoughts.
Thanks,
Walid
Access Denied
You don't have permission to access "http://fbexternal-a.akamaihd.net/embed/?" on this server.
Reference #18.3555facd.1362007289.6945153f

Same thing on mine, it just started happening last weekend.

You cannot log on (CUA System assignment missing)

Hi
We are in the middle of CRM upgrade. We upgraded couple of test (CRS) and Dev (CRD) server. We are creating both CRD/CRS in the Solution manager system landscape using tcode SMSY as the satellite servers. Connectivity between satellite server CRD and solution manager server SMP (also in CRD and SMP) has been successfully created.
While checking the Authorization test in Sateliite server (CRD/CRS) for RFC "SM_SMPCLNT050_BACK", we are getting the following error:
"You cannot log on (CUA System assignment missing)"
All other RFC created by SMSY is working fine.
To Fix this problem, i tried to repeat same process again. I was able to delete following RFC's using "clean-up RFC" function of SMSy tcode.
- SM_CRDCRMCLNT050_READ
- SM_CRDCRMCLNT050_TMW
- SM_CRDCRMCLNT050_TRUSTED
and in satellite server (CRD), i deleted following RFC's manually:
- SM_SMPCLNT050_BACK
- SM_SMPCLNT050_TRUSTED
Now, when i checked the RFC destination in SMSY of solution manager server, it is still showing me RFC "SM_SMPCLNT050_BACK". But it is not there in the satellite server as i had deleted it manually. To verify it, I checked table RFCDES in satellite server and "SM_SMPCLNT050_BACK" RFC is not there in table.
I again re-generated RFC's in SMSY of solution manager server, but got the same error ""You cannot log on (CUA System assignment missing)" for SM_SMPCLNT050_BACK.
So we are getting two problem for same process:
- You cannot log on (CUA System assignment missing)
- I deleted RFC " SM_SMPCLNT050_BACK" manually in the satellite server but SMSY still showing it in "Clean up RFC windows".
Not sure if both problems are related to each other. Pls guide to solve these issue's.
Thanks

Thanks Sunny
Your suggestion help me to fix one problem. "You cannot log on (CUA System assignment missing)" problem is fixed.
Authorization in SOLMAN system was missing for user ID that is being used in the "SM_SMPCLNT050_BACK" of the satellite server. There was no authorization profile assigned to User. This is strange.
Process (SMSY) should have created user ID and assigned required authorization profile to the User ID but it did not happened properly.User ID was created but no auth profile was assigned.
I'm facing the same problem is other server also. User ID has been created but auth profiles are missing for user ID that is being used in "SM_SMPCLNT050_BACK" of the satelliet system.
Our SOLMAN server (SMP) is the CUA Central System. Do i ned to check anything in SOLMAN server for CUA?
Following detail could be one another reason for the missing authorization profile in User ID:
- To solve the problem of "You cannot log on (CUA System assignment missing)" , i deleted following RFC's using "clean-up RFC" function of SMSy tcode.
- SM_ERDECCCLNT050_READ
- SM_ERDECCCCLNT050_TMW
- SM_ERDECCCLNT050_TRUSTED
and in satellite server (ERD), i deleted following RFC's manually:
- SM_SMPCLNT050_BACK
- SM_SMPCLNT050_TRUSTED
but "SM_SMPCLNT050_BACK" was still showing in the RFC destination in SMSY of solution manager server. In 'generate RFC destinations'. I re-generated and process created "SM_SMPCLNT050_BACK" in SM59 of ERD and user ID for this RFC has been created in SOLMAN server without adding any auth profile.
Not sure, if this is the reason. I opened oss message three days ago but still waiting for reply.
- I'm using my account to generate RFC and i think (as told by security team) that i have all authorization in both server required to generate RFC. I may need to add some more authorization.
Could you pls suggest to fix the problem of "SM_SMPCLNT050_BACK". i would like to know why this RFC is still showing in SMSY even after deleting it manully in SM59 of ERD server.
is it possible if i send you the screenshot of document that i send it to oss for your suggestion. can i hav eyour mail ID?
Thanks a lot for your help again..
Amar

The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

When i tried to login in inbrowserediting.adobe.com i see that:
The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
What does it mean? What is problem?

Hi,
I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
its saying the following
"The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
Yet i Can access my website fine "www.calmwood.com.au"
My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
so i am not understanding how it thinks its different. when its fully referenced
any help would be appreciated.
thanks

I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?

I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?
In the previous versions of Firefox when you went to you Bookmarks menu it gave you the options to either Bookmark This Page 'command' + 'D', Subscribe to this Page, Bookmark All Tabs 'up-arrow-key' + 'command' + 'D', and Organize Bookmarks 'up-arrow-key' + 'command' + 'B' however in the newest version of Firefox there is no Bookmark All Tabs so you can bookmark all the tabs that you have up in one window at a time. So I need to know if it is possible that the feature is now in a different place, is gone altogether, or if you can get that feature another way?
For me personally and my work I go through hundreds of web pages a day and save around half of those so it is imperative that I be able to bookmark more then one tab at a time because I can't be bothered to bookmark every single page separately and then go through hundreds of tabs in my Unsorted bookmarks in order to sort those bookmarks. It is simple inconvenient to sort every bookmark individually that is why the previous version of Firefox with the Bookmark All Tabs button was superior in its convenience.

Right click any tab and choose "Bookmark All Tabs".

Error: You cannot login because an error occurred while retrieving the login URL. (WW

Situation is this.. was using 8.1.6 EE and Oracle Portal.. was able to get the Oracle Portal page up and after a while the application died.. this happened numerous times. Found in one of these forums that a bug existed (UTL_HTTP) and recommended going to 8.1.7 EE because of a patch. I migrated my 8.1.6 EE to 8.1.7 EE(made sure procedures & packages were valid). I'm able to bring up the Oracle Portal page but when I go to login I get this:
Error: You cannot login because an error occurred while retrieving the login URL. (WWC-41441)
Thoughts?

Hi,
I ran ssodatan again and got the following error:
ERROR: Setting Login Server Partner App
ORA-06508: PL/SQL: could not find program unit being called
I then found out that the wwsec_sso_enabler_private in the SSO
schema is invalid and this was causing the above error. I tried
recompiling the package but got the following error:
Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
LINE/COL ERROR
151/6 PL/SQL: SQL Statement ignored
151/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
151/20 PLS-00336: non-object-table "SECI" illegal in this
context
160/4 PL/SQL: SQL Statement ignored
643/6 PL/SQL: SQL Statement ignored
643/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
643/20 PLS-00336: non-object-table "SECI" illegal in this
context
LINE/COL ERROR
651/4 PL/SQL: SQL Statement ignored
713/4 PL/SQL: SQL Statement ignored
713/50 PLS-00382: expression is of wrong type
745/3 PL/SQL: SQL Statement ignored
746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
allowed in this context
The same package in the Portal schema is valid. Will an
export of this package from a working instance and an import into
the above instance solve this problem?
Thanks and Regards,
Rupesh

I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?

I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?

iLife '09 is not available as a download - it is only available as a purchase
iLife '11 is available as a DVD purchase and the compoments of it are available from the App Store (iPhoto '11 (version 9.1.5), etc)
Exactly what did you do? And exactly what does the error message say?
On the surface it appears that you are attemptying to open a new library with an older version (iPhoto '09 can not open an iPhoto '11 library for example)
LN

I have just had the message - download itunes as you cannot burns cds etc - this sometimes happens said the message. So I removed itunes and downloaded it again and now when I click to open it says 'itunes library .it' cannot be read as it was created by

Hi, I have just had the message - download itunes again as you cannot burns cds etc - this sometimes happens said the message. So I removed itunes and downloaded it again and now when I click to open it says 'itunes library .it' cannot be read as it was created by a newer verson - help!

See Empty/corrupt iTunes library after upgrade/crash.
tt2

Attempting to download a wmv file. I keep getting the message: "You cannot save this document with extension ".wmv" at the end of the name. The required extension is ".webarchive" --if I save it this way, i just get a web address rather than the wmv

Attempting to download a wmv file. I keep getting the message: "You cannot save this document with extension “.wmv” at the end of the name. The required extension is “.webarchive” --if I save it this way, i just get a web address rather than the wmv

Find the URL for the WMV, paste it into Safari's address bar, and press the Option and Enter keys.
(66873)

V4.1 "You cannot perform this action in this region of the page" Bug?

I am receiving an "You cannot perform this action in this
region of the page" error when I try to add a link to an image. And
yes I am in an editable region.
The weird thing is, for the images that already have links, I
can edit them successfully, but if I remove them I cannot add a
link back to it.
This site was originally being administered using contribute
3.11 but the client is now using 4.1 could that have something to
do with it?
Thank you,

I was also having this problem but I was able to confirm that it wasn't old code or javascript problems. In the process of troubleshooting we realized that some links were editable and others were not. Turns out all the links that used PHP (in this case an echo for the site url) were the ones that were uneditable.
Since I've been creating pages and content with this method for years and have only had a problem in the last month, I don't really feel like this has been "solved". I certainly don't want to go back and edit all my pages using php for site organization but at least this will allow the client to make edits for now.

You cannot login because an error occurred while retrieving the login URL.(WWC-41441)

Hi,
I have a Portal install with the following specifications:
OS - Sun Solaris 2.6
DB - 8.1.7.0.0
iAS - 1.0.2.2
Portal - 3.0.9.0.7
It was working fine. Then the initjvm.sql that installs the JVM
in the database was run. This was done as part of the steps
required for enabling the UTL_SMTP. The script ran without any
errors but after that Portal Login was failing with the following
error:
You cannot login because an error occurred while retrieving the
login URL. (WWC-41441)
and there were no Java classes present in the Portal or SSO
schema. To overcome this error I reloaded the SSOHash classes to
Portal and SSO schemas and ran ssodatan. The script ran
successfully and I was able to login to the Portal after that.
However, if I login as the administrator and try to create or
edit users from the Administer tab of Portal, the same error
occurs again:
You cannot login because an error occurred while retrieving the
login URL. (WWC-41441)
I can programmatically add users using the Security APIs.
The wwsec_enabler_config_info$ table of the Portal schema
contains one row but the wwsec_enabler_config_info$ table of the
SSO Schema contains no rows.
This install of Portal is hosting a number of applications and as
such running opca again is not an option.
Any workaround for this?
Thanks,
Rupesh

Hi,
I ran ssodatan again and got the following error:
ERROR: Setting Login Server Partner App
ORA-06508: PL/SQL: could not find program unit being called
I then found out that the wwsec_sso_enabler_private in the SSO
schema is invalid and this was causing the above error. I tried
recompiling the package but got the following error:
Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
LINE/COL ERROR
151/6 PL/SQL: SQL Statement ignored
151/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
151/20 PLS-00336: non-object-table "SECI" illegal in this
context
160/4 PL/SQL: SQL Statement ignored
643/6 PL/SQL: SQL Statement ignored
643/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
643/20 PLS-00336: non-object-table "SECI" illegal in this
context
LINE/COL ERROR
651/4 PL/SQL: SQL Statement ignored
713/4 PL/SQL: SQL Statement ignored
713/50 PLS-00382: expression is of wrong type
745/3 PL/SQL: SQL Statement ignored
746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
allowed in this context
The same package in the Portal schema is valid. Will an
export of this package from a working instance and an import into
the above instance solve this problem?
Thanks and Regards,
Rupesh

"Access denied. You cannot log on to an older version of the CMS"

Similar Messages

Maybe you are looking for