Access Exporter Error -2147221163

When i try to export an 2003 mdb file with the Access exorter i get the error message 2147221163. Can somebody tell me what i did wrong ?

Hi,
I believe you are getting this error because there is a problem with your DAO installation. If you manually register the dao360.dll, you should no longer experience this issue when you attempt to use the Exporter tool.
Execute :
Regsvr32 "C:\Program Files\Common Files\Microsoft Shared\DAO\dao360.dll"
Please refer to the following article for detailed steps:
http://support.microsoft.com/?scid=kb;en-us;887033&spid=2509&sid=global
I hope this helps.
Regards,
Hilary

Similar Messages

  • Ms access exporter error

    Hi,
    I have the Ms access table .When i tried to migrate i got the error.
    First i created connection with oracle.
    Second i tried to export the data from ms access .
    I got the following error.
    Error #5 -XML Exporter Invalid procedure call or argument c:\Documents and setting\perf\My Documents\db1.mdb
    Database schema export did not complete successfully.
    Tools -> Migration -> Microsoft Access Exporter -> Run Microsoft Access 2002 exporter.

    Hi,
    This error can have various causes but could you check if any of the Access tables has default values set for Date/Time columns ? If so, remove the default values and try the export again.
    After the failure there may be a table called '_OracletblTable' in the Access database.
    The '_OracletblTable' table consists of three columns, the last of which is named 'tblname'. The last record in that table identifies the table in the source Access database where the procedure halted.
    If you can find this information have a look at the last table recorded and see if it has any default values.
    Regards,
    Mike

  • Access Exporter Error

    Hi,
    when I try to do a Export for Application Express using Oracle Access Exporter 10.2.0.1.0 I get the following error:
    Error #29074 - XMLExporter - Method of 'Run' object '_Application' failed
    C:\Documents and Settings\Oracle.XP_ONE\Desktop\teste.mdb Database Schema Export did not complete successfully.
    Thanks

    Joao,
    I have posted an announcement message to this forum with a list of recommended steps you should follow to narrow down your problem
    http://forums.oracle.com/forums/ann.jspa?annID=376
    Donal

  • Access Exporter: Error #7866

    Howdy all (and hey there, sspadafore! It feels different being on the OUTSIDE again.. :) ),
    Forgive me if this has been covered before (or elsewhere), but I was unable to find anything relevant by searching the forums and OTN.
    I'm trying to import the sample Microsoft Access databases available from Microsoft (for example, http://www.microsoft.com/downloads/details.aspx?FamilyId=7A50205E-A29B-4A43-8508-78E549ECD14C&displaylang=en), via Access 2003, and am getting the following error message:
    Error # 7866 - XMLExporter - Microsoft Office Access can't open the database because it is missing, or opened exclusively by another user .. (path-to-mdb-file) Database Schema Export did not complete successfully.
    I'm on Windows XP SP2, Access 2003 SP2, and OMW Exporter version 10.2.0.1.0 (which shipped with the pre-release APEX migration utility), and there are no other users on the system that would be using the file. To make matters worse, the same error is reported for every MDB file I try to export. Anyone have any ideas as to what could be causing this problem?
    Many thanks in advance!
    Regards,
    Brian

    Not so much. "Highly sensitive environments," and all. This workstation is actually pretty lenient for this environment -- which is a bummer, because I was hoping to demonstrate this type of Access migration to the customer to convince them to use Application Express as a database consolidation/departmental application hosting environment, rather than Microsoft SharePoint (ick).
    If anyone has any internal insights into the tool (or Access in general), and can explain what the 7866 error is, and what steps can be taken to work around it, I'd be much obliged!
    Regards,
    Brian

  • Access denied error while exporting chart to excel

    I need to export data from a gridview to chart in excel. Through system account credentials it works fine. But through a user's credentials its giving an access denied error. The gridview data is exported properly but the current chart which is displayed
    on page is not getting displayed in excel.
    So is there any other way to achieve this?
    I was thinking og saving it to virtual folder in the Site but I cannot figure out the exact code for it. Since file upload control is not involved, how to save the chart to the virtual folder. Any inputs on this?

    Hello,
    Would you mind if you use "runwithelevatedprivileges" in your code to execute code with admin privilege?
    http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spsecurity.runwithelevatedprivileges.aspx
    >I was thinking og saving it to virtual folder in the Site
    Do you want to save excel in system folder or SP site folder?
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Quicktime Export Error: "An output module stopped responding."

    I'm experiencing an odd export error whenever I use any Quicktime codecs:
    "After Effects error: An output module stopped responding. The file may be damaged or corrupted. You may need to restart After Effects."
    Similarly, Adobe Media Encoder hangs when outputting to Quicktime codecs. Neither program makes any progress at all before the hang occurs. At that point, I have to manually "end task" to exit. Also, it doesn't seem to matter what I try to export. In AME, for example, I can simply try to convert one video format to another and have it hang, so I don't think the problem is due to a problem with the source settings or effects. Also, I'm not attempting any multiprocessing since I don't really have enough RAM for that. Other output modules work, so I'm just exporting image sequences for the time being.
    System specs:
    Windows 7 64-bit
    Intel i7-2600k processor
    8 GB RAM
    GTX 580 GPU
    Software:
    Adobe CS6
    AE Plugins include Tracode Suite 12 and Optical Flares
    Quicktime 7.7.3
    Any thoughts on this? I've seen very few references to this error in other places, and not really found a solution that seems to apply to my situation. Thanks in advance for your help.
    Josh

    Thanks for setting me in the right direction. Clicking through to the 25 :: 101 error page (http://myleniumerrors.com/2013/01/06/25-101-4/) led me to a reference about other software, such as remote access software, using the same ports that AE needs for communication with its various processes. In my case, LogMeIn was the culprit. I had no idea that AE even used TCP for these types of operations, so that's very helpful to know.
    *EDIT*
    That worked temporarily, and now it doesn't work. I ran into a similar effect when I first disabled the Windows Firewall. But of course, as I type this and piddle around, it works again. It SEEMS like if I open AME and click into the output settings and scrub through the video preview, it makes everything work when I go to actually export. That's exactly the type of thing I would say is completely unrelated under normal circumstances, but at the moment all I know is that it is currently working and I don't want to test anything else until I finish the rendering I need to accomplish today. I'll work on it more later and post an update at that time.
    Thanks,
    Josh

  • Sharepoint Workflow Access Token Error

    Whenever run a workflow on the SharePoint site it gets stuck on "Started" and throws this error when inspected in the workflow view:
    Retrying last request. Next attempt scheduled after 07/01/2015 10:58. Details of last request: HTTP 
    to https://***.sharepoint.emea.microsoftonline.com/support/_api/web/lists(guid'91616358-3515-49a4-8652-08e56a608d7e') Correlation Id: 
    Instance Id: dba845fc-941c-499f-9722-0929d85899ec
    System.Net.WebException: The request was aborted: The request was canceled. ---> System.InvalidOperationException: Failed to fetch an access token from the token service. The token service returned an error type of 'invalid_request' with the following
    description: ACS50000: There was an error issuing a token. ACS50001: Relying party with identifier 
    '00000003-0000-0ff1-ce00-000000000000/***.[email protected]f5cb8a2' was not found.
    Trace ID: e000a6d4-06d3-499b-95a6-a761150135cf
    Correlation ID: c7661e3d-2465-2ecb-9935-b7ba3142478d
    Timestamp: 2015-01-07 09:50:09Z ---> System.Net.WebException: The remote server returned an error: (400) Bad Request.
       at System.Net.HttpWebRequest.GetResponse()
       at Microsoft.Activities.Hosting.Security.OAuthS2SSecurityTokenServiceCredential.FetchAccessToken(Uri stsUri, String targetServiceAudience, String authenticatorToken, HttpWebRequest request, TimeSpan timeout, EventTraceActivity
    eventTraceActivity, TimeSpan& expirationDuration)
       --- End of inner exception stack trace ---
       at Microsoft.Activities.Hosting.Security.OAuthS2SSecurityTokenServiceCredential.FetchAccessToken(Uri stsUri, String targetServiceAudience, String authenticatorToken, HttpWebRequest request, TimeSpan timeout, EventTraceActivity
    eventTraceActivity, TimeSpan& expirationDuration)
       at Microsoft.Activities.Hosting.Security.OAuthS2SSecurityTokenServiceCredential.GetAccessTokenFromTokenService(OAuthS2SPrincipal client, OAuthS2SPrincipal targetServiceAudience, HttpWebRequest originalRequest, EventTraceActivity
    eventTraceActivity, TimeSpan& expirationDuration)
       at Microsoft.Activities.Hosting.Security.OAuthS2SSecurityTokenServiceCredential.GetAuthorization(OAuthS2SAuthenticationChallenge[] bearerChallenges, HttpWebRequest request, EventTraceActivity eventTraceActivity)
       at Microsoft.Activities.Hosting.Security.OAuthS2SAuthenticationModule.AuthenticateInternal(String challenge, WebRequest request, OAuthS2SCredential credential, EventTraceActivity eventTraceActivity)
       at Microsoft.Activities.Hosting.Security.OAuthS2SAuthenticationModule.Authenticate(String challenge, WebRequest request, ICredentials credentials)
       at System.Net.AuthenticationManager.Authenticate(String challenge, WebRequest request, ICredentials credentials)
       at System.Net.AuthenticationState.AttemptAuthenticate(HttpWebRequest httpWebRequest, ICredentials authInfo)
       at System.Net.HttpWebRequest.CheckResubmitForAuth()
       at System.Net.HttpWebRequest.CheckResubmit(Exception& e, Boolean& disableUpload)
       at System.Net.HttpWebRequest.DoSubmitRequestProcessing(Exception& exception)
       at System.Net.HttpWebRequest.ProcessResponse()
       at System.Net.HttpWebRequest.SetResponse(CoreResponseData coreResponseData)
       --- End of inner exception stack trace ---
       at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
       at Microsoft.Activities.Hosting.HostedHttpExtension.HttpRequestWorkItem.HttpRequestWorkItemAsyncResult.End(IAsyncResult result, Int32& responseCode)
       at Microsoft.Activities.Hosting.HostedHttpExtension.HttpRequestWorkItem.OnEndComplete(ScheduledWorkItemContext context, IAsyncResult result)
    This only occurs on the workflows that have been designer in SharePoint Designer 2013, when the using the template ones (for example the three-state) they run fine. Have searched the internet to no avail on the error but believe it is something to do with
    the server settings and permissions. Thanks in advance

    Hi,
    According to your post, my understanding is that Sharepoint Workflow get the Access Token Error.
    I reoconmend that you can properly configure the HTTPS endpoint and then re-register the workflow farm with SharePoint.
    The snippet below assumes that you have exported the SSL certificate from the workflow manager IIS web site to c:\wfm.cer.
    $cert = Get-PfxCertificate "c:\wfm.cer"
    New-SPTrustedRootAuthority -Name "Workflow Manager Farm" -Certificate $cert
    Register-SPWorkflowService -SPSite "http://dev.sharepoint.com" -WorkflowHostUri "https://devmachine
    In addition, it may caused by
    a mismatch between SharePoint and Workflows. You can install a new version workflow manger and sharepoint designer to check whether it works.
    Here are some similar threads for your reference:
    http://sharepoint.stackexchange.com/questions/71773/sharepoint-2013-workflow-cant-get-them-to-work-again
    http://community.office365.com/en-us/f/154/t/276478.aspx?pi14176=2
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Weather magnet PAR File Export Error

    I have created a weather application PAR File following this blog:  Create a weather magnet  using xml feed from weather.com
    As far as I can tell I have followed everything correctly however when I select Export to create the file I get the following error:
    Nov 11, 2008 11:32:54 AM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[main,5,main]] ERROR: ep_wa: Build failed for myl.com/ep_wa(myl.com_MYLAN_1) in variant "default": The Build terminated with errors
    Build log -
    Development Component Build (2008-11-11 11:32:54)
      Component name: ep_wa
      Component vendor: myl.com
      SC compartment: myl.com_MYLAN_1
      Configuration: JP1_EPPHASE1_D
      Location: JP1_EPPHASE1_D
      Source code location: http://max-sap50:50000/dtr/ws/EPPHASE1/myl.com_MYLAN/dev/inactive/DCs/myl.com/ep_wa/_comp/
      DC root folder: C:Documents and Settingsm100236.dtc3DCsmyl.comep_wa\_comp
      DC type: Enterprise Portal
      DC subtype: Portal Application Module
      Host: 03-M100236
    DC Model check:
       All used DCs are available locally
       validating dependency to build plugin "sap.com/tc/bi/bp/portalapplication"
       validating dependency to  public part "default" of DC "sap.com/webservices_lib"
       validating dependency to  public part "default" of DC "sap.com/sapxmltoolkit"
       validating dependency to  public part "default" of DC "sap.com/com.sapportals.htmlb"
       validating dependency to  public part "default" of DC "sap.com/epbc.prtapi._api"
       validating dependency to  public part "default" of DC "sap.com/epbc.prtpars._htmlb"
       validating dependency to  public part "default" of DC "sap.com/epbc.prtpars._soap"
       validating dependency to  public part "default" of DC "sap.com/epbc.prtapi._test"
       validating dependency to  public part "default" of DC "sap.com/servlet"
       validating dependency to  public part "default" of DC "sap.com/jaxm"
       DC model check OK
    Start build plugin:
       using build plugin: sap.com/tc/bi/bp/portalapplication
       starting build plugin from : C:Documents and Settingsm100236.dtc3DCssap.com     c i pportalapplication\_compgendefaultpublicdef
    Build Plugin 'PortalAppPlugin', Version 7.00 SP 15 (645_VAL_REL, built on 2008-02-16 08:47:10 CET, CL76043)
       development component:  ep_wa (myl.com)
          software component:  MYLAN (myl.com)
                    location:  JP1_EPPHASE1_D
                        type:  Enterprise Portal, subtype Portal Application Module
               build variant:  default
             output location:  C:Documents and Settingsm100236.dtc3DCsmyl.comep_wa\_compgendefault
           generation folder:  C:Documents and Settingsm100236.dtc3     EBC1BF499DA88943638C12CB3AD23D86
           plugin start time:  2008-11-11 11:32:54 GMT-05:00 (EST)
                     Java VM:  Java HotSpot(TM) Client VM, 1.5.0_07-b03 (Sun Microsystems Inc.)
    General options:
      convert *.xlf to *.properties: yes
      include sources for debugging: yes
    Warning: Package folder "src.api" exists but is empty and will be ignored.
    Checking path lengths for sources
    Path length checks finished in 0.015 seconds
    Preparing data context..
    No public part descriptor found for component "webservices_lib" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "sapxmltoolkit" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "com.sapportals.htmlb" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "epbc.prtapi._api" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "epbc.prtpars._htmlb" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "epbc.prtpars._soap" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "epbc.prtapi._test" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "servlet" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "jaxm" (vendor "sap.com"), public part "default", using legacy mode.
    No 'default' JDK defined, will use running VM.
    Data context preparation finished in 0.032 seconds
    Creating Ant build file..
      Creating output file: C:Documents and Settingsm100236.dtc3DCsmyl.comep_wa\_compgendefaultlogs uild.xml
      [Velocity] Error: VM #CreateConfigArchive: error : too few arguments to macro. Wanted 3 got 0
      Using macro file:     C:Documents and Settingsm100236.dtc3DCssap.com     c i pportalapplication\_compgendefaultpublicdefmacros uild.vm
    DC specific options:
      Portal Application file name:   ep_wa.par
      Include sources in application: no
      Deploy type:                    online
    Warning: Internal warning: IComponentDependency#getPublicPartPurpose(String) should no longer be used.
    Warning: Internal warning: IComponentDependency#getPublicPartPurpose(String) should no longer be used.
    Warning: Internal warning: IComponentDependency#getPublicPartPurpose(String) should no longer be used.
    Warning: Internal warning: IComponentDependency#getPublicPartPurpose(String) should no longer be used.
    Warning: Internal warning: IComponentDependency#getPublicPartPurpose(String) should no longer be used.
    Warning: Internal warning: IComponentDependency#getPublicPartPurpose(String) should no longer be used.
    Warning: Internal warning: IComponentDependency#getPublicPartPurpose(String) should no longer be used.
    Warning: Internal warning: IComponentDependency#getPublicPartPurpose(String) should no longer be used.
    Warning: Internal warning: IComponentDependency#getPublicPartPurpose(String) should no longer be used.
    Build file creation finished in 0.078 seconds
    Starting Ant..
      Using build file:     C:Documents and Settingsm100236.dtc3DCsmyl.comep_wa\_compgendefaultlogs uild.xml
      Using build target:   build
      Using Ant version:    1.6.2
    compile:
          [echo] Compiling Java sources in src.core
          [echo] Starting Java compiler
          [echo] Settings:
          [echo]         debug: on
          [echo]      optimize: off
          [echo]   deprecation: default
          [echo]       verbose: default
          [echo]      encoding: UTF8
          [echo]        source: default
          [echo]        target: default
          [echo]   source path: C:Documents and Settingsm100236.dtc3DCsmyl.comep_wa\_compsrc.core
          [echo]    class path:
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comwebservices_lib\_compgendefaultpublicdefaultlibjava oot.jar
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comwebservices_lib\_compgendefaultpublicdefaultlibjavaiq-lib.jar
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comwebservices_lib\_compgendefaultpublicdefaultlibjava     c_sec_wssec_lib.jar
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comwebservices_lib\_compgendefaultpublicdefaultlibjavautil.jar
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comwebservices_lib\_compgendefaultpublicdefaultlibjavawebservices_lib.jar
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comepbc.prtapi._test\_compgendefaultpublicdefaultlibjavaprttest.jar
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comepbc.prtpars._soap\_compgendefaultpublicdefaultlibjavacom.sap.portal.runtime.application.soap_api.jar
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comepbc.prtpars._soap\_compgendefaultpublicdefaultlibjavacom.sap.portal.runtime.application.soap_core.jar
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comepbc.prtapi._api\_compgendefaultpublicdefaultlibjavaprtapi.jar
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comepbc.prtpars._htmlb\_compgendefaultpublicdefaultlibjavacom.sap.portal.htmlb_api.jar
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comjaxm\_compgendefaultpublicdefaultlibjavajaxm-api.jar
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comjaxm\_compgendefaultpublicdefaultlibjavasaaj-api.jar
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comservlet\_compgendefaultpublicdefaultlibjavaservlet.jar
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comsapxmltoolkit\_compgendefaultpublicdefaultlibjavasapxmltoolkit.jar
          [echo]       C:Documents and Settingsm100236.dtc3DCssap.comcom.sapportals.htmlb\_compgendefaultpublicdefaultlibjavahtmlb.jar
          [echo]    output dir: C:Documents and Settingsm100236.dtc3     EBC1BF499DA88943638C12CB3AD23D86classessrc.core
         [javac] Compiling 1 source file to C:Documents and Settingsm100236.dtc3     EBC1BF499DA88943638C12CB3AD23D86classessrc.core
         [javac] ERROR: C:Documents and Settingsm100236.dtc3DCsmyl.comep_wa\_compsrc.corecommylwadisplay.java:23: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier
         [javac] ERROR: (try -source 1.4 or lower to use 'enum' as an identifier)
         [javac] ERROR: import com.sapportals.htmlb.enum.CellHAlign;
         [javac] ERROR:                             ^
         [javac] ERROR: C:Documents and Settingsm100236.dtc3DCsmyl.comep_wa\_compsrc.corecommylwadisplay.java:24: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier
         [javac] ERROR: (try -source 1.4 or lower to use 'enum' as an identifier)
         [javac] ERROR: import com.sapportals.htmlb.enum.DropdownListBoxDesign;
         [javac] ERROR:                             ^
         [javac] 2 errors
    Error: C:Documents and Settingsm100236.dtc3DCsmyl.comep_wa\_compgendefaultlogs uild.xml:104: Compile failed; see the compiler error output for details.
         at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:938)
         at org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:758)
         at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
         at org.apache.tools.ant.Task.perform(Task.java:364)
         at org.apache.tools.ant.Target.execute(Target.java:341)
         at org.apache.tools.ant.Target.performTasks(Target.java:369)
         at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
         at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:116)
         at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:58)
         at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:196)
         at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:168)
         at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
         at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
         at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:99)
         at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:73)
         at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:59)
         at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1750)
         at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:6004)
         at com.sap.portal.developmentTools.ideSpecific.eclipse.dcutils.DCBuildWrapper.run(DCBuildWrapper.java:49)
         at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.run(SAPMPWizard.java:252)
         at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:302)
         at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:252)
         at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:758)
         at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard.performFinish(SAPMPWizard.java:531)
         at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:608)
         at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:321)
         at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
         at org.eclipse.jface.window.Window.open(Window.java:563)
         at org.eclipse.ui.actions.ExportResourcesAction.run(ExportResourcesAction.java:112)
         at org.eclipse.jface.action.Action.runWithEvent(Action.java:842)
         at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:456)
         at org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionContributionItem.java:403)
         at org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionItem.java:397)
         at org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(ActionContributionItem.java:72)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Ant runtime 0.047 seconds
    Ant build finished with ERRORS
    Compile failed; see the compiler error output for details.
    Error: Build stopped due to an error: Compile failed; see the compiler error output for details.
    Build plugin finished at 2008-11-11 11:32:54 GMT-05:00 (EST)
    Total build plugin runtime: 0.267 seconds
    Build finished with ERROR

    Thanks Harini,  That solved my Export error, however I am still having issues withthe Weather Magnet Application.  After uploading it and creating a PAR File iView I am getting lots of errors that I can't figure out.  (I haven't quite gotten the hang of reading the error logs yet). 
    #1.5 #C28BB00110020073000004F70015D02200045C10645C2F09#1227125379836#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#m100236#18970##n/a##b52d80f0b67511dd8f12c28bb0011002#SAPEngine_Application_Thread[impl:3]_32##0#0#Error#1#/System/Server#Java###Exception ID:03:09_19/11/08_0083_9333450
    [EXCEPTION]
    #1#com.sapportals.portal.prt.component.PortalComponentException: Error in init method
    Component : ep_wa.display
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:271)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
    at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
    at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:488)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(AccessController.java:242)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(AccessController.java:215)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.myl.wa.display of Portal Component ep_wa.display because: Could not instantiate implementation class
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:269)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
    at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
    at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
    ... 26 more
    Caused by: java.lang.UnsupportedClassVersionError: (com/myl/wa/display) bad major version at offset=6
    at java.lang.ClassLoader.defineClassImpl(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:224)
    at com.sapportals.portal.prt.util.AutoClassLoader.findClassInternal(AutoClassLoader.java:880)
    at com.sapportals.portal.prt.util.AutoClassLoader.loadClassLocally(AutoClassLoader.java:1250)
    at com.sapportals.portal.prt.util.AutoClassLoader.loadClass(AutoClassLoader.java:1388)
    at com.sapportals.portal.prt.util.AutoClassLoader$2.run(AutoClassLoader.java:1465)
    at java.security.AccessController.doPrivileged(AccessController.java:215)
    at com.sapportals.portal.prt.util.AutoClassLoader.loadClass(AutoClassLoader.java:1461)
    at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:365)
    at java.lang.Class.forNameImpl(Native Method)
    at java.lang.Class.forName(Class.java:152)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
    ... 30 more
    #1.5 #C28BB00110020073000004F90015D02200045C10645C633D#1227125379850#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#m100236#18970##n/a##b52d80f0b67511dd8f12c28bb0011002#SAPEngine_Application_Thread[impl:3]_32##0#0#Error##Java###03:09_19/11/08_0083_9333450
    [EXCEPTION]
    #1#java.lang.UnsupportedClassVersionError: (com/myl/wa/display) bad major version at offset=6
    at java.lang.ClassLoader.defineClassImpl(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:224)
    at com.sapportals.portal.prt.util.AutoClassLoader.findClassInternal(AutoClassLoader.java:880)
    at com.sapportals.portal.prt.util.AutoClassLoader.loadClassLocally(AutoClassLoader.java:1250)
    at com.sapportals.portal.prt.util.AutoClassLoader.loadClass(AutoClassLoader.java:1388)
    at com.sapportals.portal.prt.util.AutoClassLoader$2.run(AutoClassLoader.java:1465)
    at java.security.AccessController.doPrivileged(AccessController.java:215)
    at com.sapportals.portal.prt.util.AutoClassLoader.loadClass(AutoClassLoader.java:1461)
    at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:365)
    at java.lang.Class.forNameImpl(Native Method)
    at java.lang.Class.forName(Class.java:152)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
    at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
    at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:271)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
    at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
    at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:488)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(AccessController.java:242)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(AccessController.java:215)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    #1.5 #C28BB00110020070000006010015D02200045C1064C8BAFB#1227125386951#com.sap.portal.SOAPLogger#sap.com/irj#com.sap.portal.SOAPLogger#m100236#18970##n/a##b52d80f0b67511dd8f12c28bb0011002#SAPEngine_Application_Thread[impl:3]_17##0#0#Warning#1#/System/Server#Java###Call failed
    [EXCEPTION]
    #1#SOAP Fault Exception [Actor [max-sap55] com.sapportals.portal.prt.service.soap.exception.SoapFaultHandler] : The User Authentification is not correct to access to the Portal Service com.sap.portal.prt.soap.Bridge or the service was not found.
    <type>java.lang.IllegalAccessError</type>

  • Blank second page and export error in Crystal 10 Web Report Viewer

    We have a customer that is having 2 issues viewing an .rpt file in the Crystal 10 Web Report Viewer.  When they view a report that is 12 pages, the first page appears OK.  When they click Next to go to the Next page, the page shows as blank.  The second issue is that If they try to export the .rpt they get this error:
    Exception Details: System.Runtime.InteropServices.COMException: Access denied Error in File UNKNOWN.RPT:
    Access to report file denied. Another program may be using it.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack trace:
    [COMException (0x80000220): Access denied.
    Error in File UNKNOWN.RPT:
    Access to report file denied. Another program may be using it.]
          CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export (ExportOptions pExportOptions, RequestContext pRequestContext) +0
    CrystalDecisions.ReportSource.ErrorReportSourceBase.ExportToStream(ExportRequestContext reqContext) +133
    [LoadSaveReportException: Access denied.
    Error in File UNKNOWN.RPT:
    Access to report file denied. Another program may be using it.]
    CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) +661
    CrystalDecisions.ReportSource.ErrorReportSourceBase.ExportToStream(ExportRequestContext reqContext) +186
    CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExplortRequestContext reqContext) +20
    I can view and export the same .rpt file in my environment without any issues.  Has anyone seen these errors before and have any ideas on how to resolve them?  They seem to be environment related since I can view the same report OK on my machine.
    This is using Crystal 10 on Windows Server 2003.

    Hello,
    This sounds like a postback issue. Does your application handle postback by putting the report in session?
    There is a [sample|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_samples_aspx/data/crsdk_net_tutorials_115_en.zip] to look at on our website. It was created with Crystal Reports XI R2 and Visual Studio .NET but the code will be the same.
    The basic code is:
    Private crReportDocument As ReportDocument
        Private Sub ConfigureCrystalReports()
            'Check to see if the report exists
            If (Session("crReportDocument") Is Nothing) Then
                crReportDocument = New ReportDocument()
                crReportDocument.Load("C:\1 - Report\CRParams.rpt")
                'Do anything required for the report
                'Logon to the database
                'Pass parameters
                'Assign the report into Session
                Session("crReportDocument") = crReportDocument
                'Assign the report to the Viewer
                myCrystalReportViewer.ReportSource = crReportDocument
            Else
                'Assign the report that is stored in Session to the report instance.
                crReportDocument = CType(Session("crReportDocument"), ReportDocument)
                'Assign the report to the Viewer for each postback
                myCrystalReportViewer.ReportSource = crReportDocument
            End If
        End Sub
    Elaine

  • Oracle Migration Tool giving Access denied error for Read operation

    Hi;
    Oracle Migration tool is giving access denied error when we are trying to Read a record for Access Profiles.
    We are getting (SBL-ODS-50085) error.This is happening only for few records(Access Profiles).
    Although the user role is administrator having full access and privilege (Manage User and Access checked).
    Pl. help me resolve the issue.
    Thanks!

    Hi,
    Does it happen when you try to read "any" Access Profile?
    If yes, please have a look at the
    "Admin: Users and Access Controls - Manage Users and Access - Manage Users and establish User Quotas. Define Access Profiles, Roles and Groups to manage data access controls." privilege in the role of the user you use for migration.
    In order to avoid any problem, I usually create a "Migration" role temporarily and assign this role ALL the privileges to avoid such failures at the time of export.
    Hope this helps,
    Best regards,
    Charles DUBANT.
    http://www.dubant.com/

  • Encore CS3/Windows XP Access Denied error...?

    I'm running XP version 5.1 SP3.  I'm trying to build a project, but I keep getting the Access Denied error message.  I've read the fix for Vista, but I don't have the options listed.  This is my first time using Encore, but I know co-workers have successfully used it previously...but none of them have a clue what's going on.  Thanks

    Any Matrox involved?
    Now, how are you getting your PrPro Sequences into En?
    As a test, from PrPro, Export as elemental/elementary streams, i.e. one Video-only and one Audio-only file, per Sequence. For the Audio, choose PCM/WAV 48KHz 16-bit*. Import the Video-only file as a Timeline, and the WAV as an Asset. Drag the Audio from the Project Panel to the appropriate Timeline. Do you get Audio?
    Good luck,
    Hunt
    * If you have a DD 5.1 SS Master Audio Track in PrPro, you will then need to Export that with the SurCode DD 5.1 SS encoder plug-in, as an AC3 file.

  • Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

    I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
    Excel Web Access
    An error has occurred.
    Please contact your system administrator if this problem persists.
    Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
    1. The 12/logs file is as bellows:
    10/10/2014 09:53:55.18  w3wp.exe (0x6528)                        0x5C08 Excel Services               
     Excel Calculation Services     2u7d Medium   ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
    not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local(). 
    10/10/2014 09:53:55.18  w3wp.exe (0x6528)                        0x5C08 Excel Services               
     Excel Services Administration  8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
    either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.. 
    10/10/2014 09:53:55.18  w3wp.exe (0x6528)                        0x5C08 Excel Services               
     Excel Web Access               6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
    An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
    outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()    
    at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office... 
    2.the event in event viewer is:
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          2014/10/10 9:49:43
    Event ID:      4625
    Task Category: Logon
    Level:         Information
    Keywords:      Audit Failure
    User:          N/A
    Computer:      ***.net
    Description:
    An account failed to log on.
    Subject:
     Security ID:  NULL SID
     Account Name:  -
     Account Domain:  -
     Logon ID:  0x0
    Logon Type:   3
    Account For Which Logon Failed:
     Security ID:  NULL SID
     Account Name:  ***
     Account Domain:  ***
    Failure Information:
     Failure Reason:  An Error occured during Logon.
     Status:   0xc000006d
     Sub Status:  0x0
    Process Information:
     Caller Process ID: 0x0
     Caller Process Name: -
    Network Information:
     Workstation Name: ***
     Source Network Address: ***
     Source Port:  63664
    Detailed Authentication Information:
     Logon Process:  
     Authentication Package: NTLM
     Transited Services: -
     Package Name (NTLM only): -
     Key Length:  0
    This event is generated when a logon request fails. It is generated on the computer where access was attempted.
    The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
    The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
    The Process Information fields indicate which account and process on the system requested the logon.
    The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
    The authentication information fields provide detailed information about this specific logon request.
     - Transited services indicate which intermediate services have participated in this logon request.
     - Package name indicates which sub-protocol was used among the NTLM protocols.
     - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
    Event Xml:
    <Event xmlns="">
      <System>
        <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
        <EventID>4625</EventID>
        <Version>0</Version>
        <Level>0</Level>
        <Task>12544</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8010000000000000</Keywords>
        <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
        <EventRecordID>37602685</EventRecordID>
        <Correlation />
        <Execution ProcessID="532" ThreadID="26096" />
        <Channel>Security</Channel>
        <Computer>***.net</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="SubjectUserSid">S-1-0-0</Data>
        <Data Name="SubjectUserName">-</Data>
        <Data Name="SubjectDomainName">-</Data>
        <Data Name="SubjectLogonId">0x0</Data>
        <Data Name="TargetUserSid">S-1-0-0</Data>
        <Data Name="TargetUserName">***</Data>
        <Data Name="TargetDomainName">***</Data>
        <Data Name="Status">0xc000006d</Data>
        <Data Name="FailureReason">%%2304</Data>
        <Data Name="SubStatus">0x0</Data>
        <Data Name="LogonType">3</Data>
        <Data Name="LogonProcessName">
        </Data>
        <Data Name="AuthenticationPackageName">NTLM</Data>
        <Data Name="WorkstationName">***</Data>
        <Data Name="TransmittedServices">-</Data>
        <Data Name="LmPackageName">-</Data>
        <Data Name="KeyLength">0</Data>
        <Data Name="ProcessId">0x0</Data>
        <Data Name="ProcessName">-</Data>
        <Data Name="IpAddress">***</Data>
        <Data Name="IpPort">63664</Data>
      </EventData>
    </Event>

    Hi Tracy,
    Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
    This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
    zone for your web application, and also add these URLs as trusted locations, then check results again.
    If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur. 
    https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
    http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
    Thanks
    Daniel Yang
    TechNet Community Support

  • Access denied error while writing a file to the file system - myfileupload.saveas() throws system.unauthorizedexception

    hi,
    as part of my requirement , i have to perform read and  write  operations of  few files [ using the file upload control in my custom visual web part] and on submit button click.
    but while writing these files - with the help of  fileupload control - and when i use  myfileupload.saveas(mylocation);
    - i am saving these files into my D:\ drive of my server , where i am executing my code -, am getting access denied error.
    it throws system.unauthorizedexception.
    i have given full control on that folder where i was trying to store my attached files. and also  after following asp.net forums,
    i have added  iusr group added and performed all those steps such that, the file is saved in my D:\ drive.
    but unfortunately  that didnt happen.
    also
    a) i am trying the code with runwithelevatedprivileges(delegate() )  code
    b) shared the drive within the  d :drive where i want o save the files.
    c) given the full privieleges for the app pool identity- in my case , its
    network service.
    the  other strange thing is that, the same code works perfectly in  other machine, where the same sp, vs 2012  etc were installed .
    would like to know, any other changes/ steps i need to make it on this  server, where i am getting the  error.
    help is  appreciated!

    vishnuS1984 wrote:
    Hi Friends,
    I have gone through scores of examples and i am failing to understand the right thing to be done to copy a file from one directory to another. Here is my class...So let's see... C:\GetMe1 is a directory on your machine, right? And this is what you are doing with that directory:
    public static void copyFiles(File src, File dest) throws IOException
    // dest is a 'File' object but represents the C:\GetMe1 directory, right?
    fout = new FileOutputStream (dest);If it's a directory, where in your code are you appending the source file name to the path, before trying to open an output stream on it? You're not.
    BTW, this is awful:
    catch (IOException e)
    IOException wrapper = new IOException("copyFiles: Unable to copy file: " +
    src.getAbsolutePath() + "to" + dest.getAbsolutePath()+".");
    wrapper.initCause(e);
    wrapper.setStackTrace(e.getStackTrace());
    throw wrapper;
    }1) You're hiding the original IOException and replacing it with your own? For what good purpose?
    2) Even if you had a good reason to do that, this would be simpler and better:
    throw new IOException("your custom message goes here", e);
    rather than explicitly invokign initCause and setStackTrace. Yuck!

  • Adobe media encoder export error  "writer not found"

    When trying to export to wmv using adobe media encoder I get an export error of "writer not found". I did a search and found others having the same issue with no fix as far as I can see. Just wondering if anyone has any more iformation on this. I'm using Vista Ultimate and Premiere CS3.
    Thanks

    I registered the WMEncoderHelper.exe file with regserv, but I still get
    the "writer not found error". I wish I knew what codec it is trying to find and use.

  • Access Denied error (code 5)

    Hi
    I am using server 2008 r2 sp1 while installing any windows update or my sql I am getting error code 5 access denied
    and i am installing with Admin ID. What can be the reason?

    Checked this ? 
    https://social.technet.microsoft.com/Forums/en-US/522a1177-22eb-458b-a113-d1958e0b991e/sql-express-access-denied-error-code-5?forum=sqlexpress
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

Maybe you are looking for

  • I am unable to Download Mountain Lion for my Mac Pro.

    This really *****. Now I know why I can't download Mountain Lion!!!! I have an 8 core Mac Pro at 3ghz Hardware Overview:   Model Name:          Mac Pro   Model Identifier:          MacPro2,1   Processor Name:          Quad-Core Intel Xeon   Processor

  • DB13offline backup erERRORMESSAGE: Error -1035 in dmdb6bkp.c(1498):SQL1035N

    We have received the below msg when we took offline backup. Job started Step 001 started (program RSDBAJOB, variant &0000000000251, user ID SAGARK) Execute logical command DB6_DBBACKUP On host eccprod Parameters:PRD OFFLINE TO /prdback/sapbackup BUFF

  • Editing in Standard or Pro

    Hi! Trying to nail down the version I need to do the following: Reduce file size Extract (break up) pages Can these be done with XI Standard or do I need Pro? Any guidance will help. Thank you!!

  • How to specify URL in server.xml of Tomcat

    Hi Everybody, I need help.How to specify url in the server.xml. I developed one application in the Tomcat 3.3.I want to access the by entering uri(like:http:test.com). What are tags to enter in the server.xml. Right now i am accessing like:http://loc

  • Variable to create new dimension value in Webi

    hi There in a webi report, i have couple of variables, what i need to do is to create a new dimension by these variables, so i can use it in a chart for example: i have current month, previous month, previous of previous month, all of them are variab