(Access is denied) error

Could anyone please tell me why am I getting the error "C:\temp\Installation (Access is denied)".
I am trying to copy selected few files from source to destination.
public class filesMove
     public filesMove()
     void copyDirectory(File source, File destination) throws IOException
          System.out.println("source: "+source);
          //output: source: D:\fonts\xyz.PFB
          //output: source: D:\fonts\xyz.PFM
          System.out.println("destination:"+destination);
          //output: destination: C:\temp\Installation
          copyFile(source, destination);
     private void copyFile(File src, File dst) throws IOException
          InputStream in = new FileInputStream(src);     
          OutputStream out = new FileOutputStream(dst);     
          byte[] buf = new byte[1024];
          int len;
          while((len = in.read(buf)) > 0)
               out.write(buf, 0, len);
          in.close();
          out.close();
}

destination seems not to be the name of a file but of a directory. What you are trying to do seems to be writing the content of a file into a directory (and not into a file). This does not work.
You must first create a filename (using the name of your destination directory and the original file name).
Open the FileOutputStream on this file name and it should work.
One more thing, use a slash instead of a backslash in your file names. File names are Strings. And a backslash is an escape character. Using two backslashes does work but it gets confusing....

Similar Messages

  • Acrobat 9 Pro Trial Installation - Access is denied error

    I am trying to install the trial version of Acrobat 9 Pro, but I consistently get variations of the Access is denied error:
    Access is denied. File: C:/Users/[username]/AppData/Local/NOS/nos08632//nos483B.tmp (variations occur within the NOS folder, e.g. /NOS/nos08424//nosC1A5.tmp, etc.)
    My only choice is to click OK, after which the installation quits. Within the AppData/Local folder is a NOS folder, which contains a TMP file that is not named the same as the TMP file in the error message. I delete the NOS folder and try the installation again, but still get the error message at around 30% (give or take a few %) into the installation.
    I am running Windows Vista Home Premium SP2 on a 64-bit operating system with an Intel Core Duo CPU processor.
    Any ideas?

    Are you logged in at the administrator? Do you have anti-virus turned on? Are you sure your trial download is not corrupt (check the file size if possible)?

  • Getting 'access is denied' error when access Flight Example sample gateway service

    Hi All, Greetings! I am new to SAPUI5. I am getting 'Access is denied' when trying to load data from the sample gateway service (Flight Example). Please help.
    Here's the entire code:
    view1.view.js
    sap.ui.jsview("ui5_proj09_flightdemo.view1", {
          getControllerName : function() {
             return "ui5_proj09_flightdemo.view1";
          createContent : function(oController) {
         var serviceURL = "https://sapes1.sapdevcenter.com/sap/opu/odata/IWFND/RMTSAMPLEFLIGHT/";
         var readRequestURL = "/FlightCollection(carrid='AA',connid='0017',fldate=datetime'2013-05-01T00:00:00')/?$format=xml";
           var loginoDataModel = new sap.ui.model.odata.ODataModel(serviceURL, true, "my_sapes1_userid", "my_sapes1_pwd");
           alert("Before Service Call");
           loginoDataModel.read(readRequestURL, null, null, false, 
                       function(oData, oResponse) {
                      alert("Success");
                             var result = oData.results;
                             alert(result.length);
                             if(result.length > 0){
                                 webmodel.setData({modelData: result});
                                 table.bindRows("/modelData");
                       function(oError){
                             alert("Error::"+oError.message); //getting 'access is denied' error message popup at this line
           alert("After Service Call");
              var oTable = new sap.ui.table.Table( {
      id : "oTableid", // sap.ui.core.ID
      width : "auto", // sap.ui.core.CSSSize
      rowHeight : undefined, // int
      columnHeaderHeight : undefined, // int
      columnHeaderVisible : true, // boolean
      visibleRowCount : 10, // int
      firstVisibleRow : 0, // int
      selectionMode : sap.ui.table.SelectionMode.Single // sap.ui.table.SelectionMode
      //Define the columns and the control templates to be used
      var oColumn = new sap.ui.table.Column({
      label: new sap.ui.commons.Label({text: "City From"}),
      template: new sap.ui.commons.TextField().bindValue("cityFrom"),
      sortProperty: "lastName",
      filterProperty: "lastName",
      width: "200px"
      oTable.addColumn(oColumn);
      var oColumn2 = new sap.ui.table.Column({
      label: new sap.ui.commons.Label({text: "City To"}),
      template: new sap.ui.commons.TextView().bindProperty("text", "cityTo"),
      sortProperty: "firstName",
      filterProperty: "firstName",
      width: "200px"
      oTable.addColumn(oColumn2);
    // oTable.bindRows("/modelData");
      oTable.placeAt("content");
    index.html
    <!DOCTYPE HTML>
    <html>
           <head>
                  <meta http-equiv="X-UA-Compatible" content="IE=edge">
         <script src="resources/sap-ui-core.js"
                          id="sap-ui-bootstrap"
                          data-sap-ui-libs="sap.ui.commons,sap.ui.table,sap.ui.core"
                          data-sap-ui-theme="sap_goldreflection" >
                  </script>
                  <!-- add sap.ui.table,sap.ui.ux3 and/or other libraries to 'data-sap-ui-libs' if required -->
         <script>
              sap.ui.localResources("ui5_proj09_flightdemo");
                         var view = sap.ui.view({id:"idview11", viewName:"ui5_proj09_flightdemo.view1", type:sap.ui.core.mvc.ViewType.JS});
                view.placeAt("content");
         </script>
           </head>
           <body class="sapUiBody" role="application">
                  <div id="content"></div>
           </body>
    </html>
    Regards,
    Sai

    Hi Sai,
    You can refer my blog How to create SAPUI5 application consuming Gateway service with the help of SAP NW Gateway Plug-in for Eclipse
    Please go though it and see if it helps you to resolve this issue.
    Regards,
    Chandra

  • Window.open in IE with URL "file:///" results in "Access is Denied" error

    Hi All:
    In a JSP, which gets launched with HTTP or HTTPS protocol, we have a link to open/view the file(attached from local PC) after it gets uploaded to the server. We used the "file:" protocol to open it in a new window. Currently we are stuck with a problem. We are getting "Access is denied" error when trying to click the link in IE 6.0. It used work in XP until SP1. And we read that starting with SP2 this problem is occurring and it is coming because of the change in Protocol (lauching a window using "file" protocol from a page lauched with HTTP(S) protocol).
    We did some research over the NET but could not find a solution to overcome it. Could you please share with us if you have any ideas or soultions with us. It will greatly help us to proceed. Appreciate any help in this regard.
    Thanks in advance...
    -Shiva

    Thanks for the reply.
    But it will be simpler to open the attachement from the local directory from where it got selected for uploading. We have been doing this until we hit this roadblock.
    Any solutions to over come ??

  • MDT 2012 - Failed to Run Action: Install Operating System Access is Denied (Error: 0000005; Source: Windows)

    Unable to deploy any image with WIM file. Vanilla or Custom Image gives the following error:
    ZTI Error – Unhandled error returned by LTIApply: invalid procedure call or argument (5)
    Litetouch deployment failed, Return code = -2147467259 0x80004005
    Failed to run action: Install Operating System.
    Access is denied (Error: 00000005; Source: Windows)
    Tried Giving Everyone Full rights to the deployment share
    Rebooted Server
    Updated Deployment Share
    Any ideas would be great!
    Thanks
    Rick
    Richard Ray

    https://skydrive.live.com/redir?resid=57E5397C8C507949!129&authkey=!AJDCfz7nGblrdQE&ithint=folder%2c.log
    Please try this link.
    Kris Da San Martino
    The SMSTS.log shows
    Expand a string: WinPEandFullOS TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
    Executing command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf" TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
    Process completed with exit code 5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    !--------------------------------------------------------------------------------------------! TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Failed to run the action: Install Operating System.
    Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Set a global environment variable _SMSTSLastActionRetCode=5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Clear local default environment TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Let the parent group (Install) decides whether to continue execution TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    The execution of the group (Install) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Failed to run the last action: Install Operating System. Execution of task sequence failed.
    Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Task Sequence Engine failed! Code: enExecutionFail TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    **************************************************************************** TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
    Task sequence execution failed with error code 80004005 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)

  • Access is denied Error while accessing WPC webpage

    Hello,
    I am getting following error while trying to access a web page created through Web Page Composer. I am able to access correctly if I assign WPC role to user but I don't want assign this to user as I want it to be read only for this user.
    Please help.
    #1.5 #0019B9E818EB006A0000009000000178000451E63DC00C48#1215949227398#com.sap.nw.wpc.runtime.ContainerComponent#sap.com/irj#com.sap.nw.wpc.runtime.ContainerComponent#employee1#9368##n/a##7cb0479050d011ddabce0019b9e818eb#SAPEngine_Application_Thread[impl:3]_13##0#0#Error##Plain###Error creating node Access is denied: com.sap.nw.wpc.runtime.DropTargetComponent - user: Johnson, Terry#
    #1.5 #0019B9E818EB006A0000009100000178000451E63DC00ED2#1215949227398#com.sap.nw.wpc.runtime.AbstractDisplayComponent#sap.com/irj#com.sap.nw.wpc.runtime.AbstractDisplayComponent#employee1#9368##n/a##7cb0479050d011ddabce0019b9e818eb#SAPEngine_Application_Thread[impl:3]_13##0#0#Error##Java###Can not get node for component from the request, Access is denied: com.sap.nw.wpc.runtime.DropTargetComponent - user: Johnson, Terry
    [EXCEPTION]
    #1#com.sap.nw.wpc.runtime.WcmRuntimeException: Access is denied: com.sap.nw.wpc.runtime.DropTargetComponent - user: Johnson, Terry
         at com.sap.nw.wpc.runtime.ContainerComponent.getNodeForComponent(ContainerComponent.java:317)
         at com.sap.nw.wpc.runtime.AbstractDisplayComponent.doOnPOMReady(AbstractDisplayComponent.java:185)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:396)
         at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:703)
         at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
         at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
         at com.sapportals.portal.prt.pom.PortalNode.processEventQueue(PortalNode.java:799)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:652)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    regards,
    Jaish

    Hi,
    No WPC role should (not compulsory)  be given to user if he / she wants to use web page created in WPC.
    create a custom role, under which add a work set and add your web pages to this workset. thats it. and give this custom role to your user.
    here is everything on WPC (creating wpc worksets, roles, showing them to end users) all... including video presentations...
    Web Content Management: Web Page Composer in SAP NetWeaver Portal
    hope this will solve your problem
    regards,
    Pradeep
    Edited by: pradeep bondla on Jul 14, 2008 12:41 PM

  • Access is denied error when launching HFM based Financial Reports

    When attempting to run Financial Reports where the data source is an HFM application, users sometimes get the following error(s):
    Access is denied
    <BR>Access is denied
    Sometimes the error is more detailed:
    1001:datasourcename=HOLX;errorMsg=Access is Denied. <BR>Access is denied. (The more detailed error is followed by references to POV members display names and member names, etc.)
    The error is intermittent and cannot be easily reproduced. Sometimes users get it for hours at a time, other times they can log out and log back in and run the report fine. The users are running the reports via Workspace.
    We are running the following versions, and Web Logic is our application server.
    HFM Server: 9.3.1.3
    Workspace: 9.3.1.0
    Financial Reports: 9.3.1.0
    I did increased the JVM heap size allocation on the Reports server from:
    -Xms512m
    -Xmx1024m
    to
    -Xms768m
    -Xmx1280m
    That setting change appears to have made the issue not appear as frequently, but it is still occurring. I may have bandwidth to increase the heap size limits to 1024 and 1536.
    Any advice and / or help would be appreciated! The fact that I cannot easily reproduce the error and the lack of references to it in the application logs are making it very frustrating!

    We had gotten this exact same error with some users getting it, some not getting it, and other users getting it sometimes.
    We were told it happened when a certain number of users are in HFM reports at the same time.
    To fix it you need to do the following on the HFM production servers (Foundation/Core Servers, Application Servers, and Web Servers)
    Apply registry changes to prod servers:
    On the server click Start, click Run, type regedit, and then click OK
    Locate and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Rpc
    Click the Edit menu, point to New, and then click DWORD Value.
    Type Server2003NegotiateDisable as the name of the new DWORD Value
    Right-click Server2003NegotiateDisable, and then click Modify.
    In the Value Data box, type 1, and then click OK.

  • 'Access is denied' error in ESS iViews & Page not displayed' thru. internet

    Hi,
      We are implementing <b>ESS(Webdynpro)/MSS(Java)</b>.
      We are in EP6 SP13.
      We want to put our portal on internet through SSL.
    I have installed SAP Webdispatcher and configured it to support SSL. SAP webdispatcher is installed on a DMZ machine(hostname: SAPROUTER).
    <i>webdispatcher ports:</i>
    http port: 80
    https port: 8443
    1) When i try to access the portal from the DMZ machine (where the webdispatcher is installed) using <b>https://saprouter.domainname.net:8443/irj/portal</b>, i am able to see all the iViews.. but, i am getting '<b>access is denied</b>' error(in the status bar) when i try to click on any link in ESS iViews (for ex: working time, Employee search).. when i try to double click i am getting javascript:void(0)
    2) When i try to access the portal through internet(<b>https://<ipaddress>:8443/irj/portal</b>), I get the logon page and after logging in... i am not able to see the ESS and Transaction iViews .. getting 'Page cannot be displayed' error.
    When i am able to see the iViews in the DMZ machine.. why are they not being displayed when i access through internet??
    Can any1 help me in this regard?? What am i missing ??
    Awaiting your reply.
    Regards,
    SK.

    It’s a hot topic I think,
    Where facing the exact same problems.
    When we logon ‘LOCAL’ to the Portal the iview works. (Not true the internet / DMZ)
    But when we logon true the webdispatcher we get the Portal Layout, so the dispatcher works.
    But the WEBdynpro Iview gives the error -> ‘Page not displayed'
    And when we edit the file “hosts” on the pc of the client browser and fill in the hostname of the SAP Portal the Iview works…..???
    There are no ports closed on the firewall, everything is allowed.
    Can anyone tell me of it’s necessary to edit the Web Dynpro Runtime Environment. Here are some settings for the WEBdispatcher but I can’t get it working.
    -     sap.webdispatcher.host           = Defines the host of a used Web Dispatcher
    -     sap.webdispatcher.port            = Defines the port of a used Web Dispatcher
    -     sap.webdispatcher.protocol      = Defines the protocol of a used Web Dispatcher
    See the link -> http://help.sap.com/saphelp_nw04s/helpdata/en/43/8a1a8ece230c8ce10000000a11466f/frameset.htm
    When I activate the trace on the webdispatcher
    (D:webdispsapwebdisp.exe pf=D:webdispsapwebdisp.pfl -t 2)
    In the Tracefile I can see that the webdispatcher resolves the SAP portal system. That’s was aleady confirmed by seeing the portal framework from the client. I think that the WEBdynpro’s have to be remote activated, or some addition settings in the webdispatcher.
    If somebody get an idée I really would like to know it.
    Best regards,
    Edwin

  • "SCRIPT5: Access is denied" error when accessing web sites using LocalStorage

    We are having an issue with Internet Explorer 10 affecting users on a number of our Windows 8 workstations. When a user visits a web site that uses the Local Storage feature of HTML5, the page is not displayed correctly. For example, if you visit this page:
    http://jsfiddle.net/xFtQR/
    You should see text in the grey boxes in the lower-right hand corner if everything is working. For the affected users, nothing is displayed. In addition, if you open the F12 Developer Tools and reload the page, the following error message is displayed: "SCRIPT5:
    Access is denied.". It appears the LocalStorage feature is broken for these users.
    From the troubleshooting I've done so far, I've determined that this issue does not affect the Local Administrator account on these computers, but it does affect any domain user and any new local user I create, whether the local user is in the Administrators
    group or not. This leads me to believe the issue may be related to the default user profile in the image that was applied to these computers.
    Other observations:
    Performing a complete reset of Internet Explorer settings (from Tools > Internet Options... > Advanced) does not resolve the issue
    These sites do work correctly after turning off Protected Mode for the Internet Zone (from Tools > Internet Options... > Security) 
    These sites also work correctly when InPrivate Browsing is turned on
    I've tried using Process Monitor to determine whether access is being blocked to a folder. On a working computer, iexplore.exe creates a file within a folder at C:\Users\username\AppData\LocalLow\Microsoft\Internet Explorer\DOMStore. I can't see
    anything on an affected computer that would prevent IE from creating this folder, as the security settings on the folder all appear to be correct.
    The location of this folder appears to be stored in the registry at HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\LowCache\Extensible Cache\DOMStore. I've tried copying this key from a working computer and blanking
    it out entirely to have IE recreate it, but neither resolved the issue. I've even gone as far as to try and compare an export of the registry from the default user profile from a working system and an affected system but I haven't been able to pinpoint any
    differences which I thought might be relevant.
    I've tried the "Internet Explorer Performance" and "Internet Explorer Safety" troubleshooters in the Control Panel.
    Here are some links to articles on other sites which make reference to the same (or a similar) issue:
    http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/ie10-script5-access-is-denied/e87bdb30-7f2a-4510-bfa3-a22b995f777b
    http://community.spiceworks.com/topic/357825-ie10-script5-access-is-denied
    https://github.com/meteor/meteor/issues/1291
    Unlike these other cases, deleting an affected user's profile does not resolve the issue (further bolstering my theory that the issue is due to an issue in the default profile in my case).
    Thanks in advance for any assistance anyone can provide!

    With some excellent detective work by Microsoft Product Support (thanks Siddarth!), the solution has been found.
    It turns out that in addition to the security settings on a folder, there is an integrity setting. More information about it is
    here.
    The integrity setting on the AppData\LocalLow folder in each user's profile is supposed to be set to "Low" (hence the name, presumably). In our case, the integrity level was not set correctly on this folder. To rectify the problem, we will need
    to run the following command under each user's profile (with a login script, for example):
    icacls %userprofile%\Appdata\LocalLow /t /setintegritylevel (OI)(CI)L
    As for how this incorrect setting was propagated in the first place, it is because the LocalLow folder in the C:\Users\Default\Appdata folder in our customized OS image had the wrong setting. The C:\Users\Default folder is the template for a new user profile,
    so each new user on these computers was affected. I examined the C:\Users\Default\AppData folder on another machine without a customized user template and found the LocalLow folder is not present at all, so in our environment we will be deleting the C:\Users\Default\AppData\LocalLow
    from each machine to prevent the issue from affecting future new users.
    EDIT: If the command above does not resolve the issue, the registry key that points to the low integrity DOMStore folder may have been changed. Check the
    CachePath registry value at HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\LowCache\Extensible Cache\DOMStore. It should be
    %USERPROFILE%\AppData\LocalLow\Microsoft\Internet Explorer\DOMStore.

  • Windows Azure Virtual Network - Access is denied Error 0x80070005

    Installed a Virtual Network, all options default, setup Gateway, created and uploaded Certs, downloaded 64 bit VPN client.  Windows 7, fully patched, AV client disabled.
    When I attempt to connect I get:
    Access is denied.
     (Error 0x80070005) For customized troubleshooting information for this connection, click Help
    I see many similar posts, but no answers.  Has anyone gotten Point-to-Site to connect?  Is this not supported in the free trial and MSDN accounts?
     Operating System      : Windows NT 6.1 Service Pack 1
     Dialer Version        : 7.2.7600.16385
     Connection Name       : 84810c9d-721a-4e79-abca-29ad922735c2
     All Users/Single User : Single User
     Start Date/Time       : 11/8/2013, 13:50:17
     Module Name, Time, Log ID, Log Item Name, Other Info
     For Connection Type, 0=dial-up, 1=VPN, 2=VPN over dial-up
    [cmdial32] 13:50:17 03 Pre-Init Event CallingProcess = C:\Windows\Explorer.EXE
    [cmdial32] 13:50:25 04 Pre-Connect Event ConnectionType = 1
    [cmdial32] 13:50:25 06 Pre-Tunnel Event UserName =  Domain =  DUNSetting = 84810c9d-721a-4e79-abca-29ad922735c2 Tunnel DeviceName =  TunnelAddress = azuregateway-84810c9d-721a-4e79-abca-29ad922735c2-0.cloudapp.net
    [cmdial32] 13:50:29 21 On-Error Event ErrorCode = -2147024891 ErrorSource = RAS
    Other users with a similar issue:
    http://stackoverflow.com/questions/16320918/windows-azure-virtual-network-point-to-site-connection-error
    Still more:691
    Access denied because username and/or password is invalid on the domain.
    How does username and/or password make any sense?  It hasn't asked for any credentials, it just fails.

    Hi,
    Thanks for your response.
    Did you configure the Point-to-Site virtual network using this article?
    Configure a Point-to-Site VPN in the Management Portal
    http://msdn.microsoft.com/en-US/library/windowsazure/dn133792.aspx
    After the virtual network is created, you may create the gateway as the link mentioned.
    Regards.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Pls help, (Access is denied) error when file upload to a local directory

    Hi, I've been stuck on this for the past few days and I am quite new at developing web application.
    Here is the problem that I am having, I don't know why it keeps on saying "access is denied" when I can see that the file is uploaded to the directory. I am developing a JSP page file upload using Jakarta Fileupload v1.2. However, every time when I try to upload a file to a local path (e:\temp) on the server I keep getting this problem. I even try looking into the server.policy file on glassfish but no luck, your help is appreciated thanks
    Here's the log after file upload, note: I can see the file being uploaded in the e:\temp but why does it keep telling me the error?
    I'm using netbean 5.5.1 and glassfish v2
    Initializing Sun's JavaServer Faces implementation (1.2_04-b10-p01) for context '/TestReport'
    java.io.FileNotFoundException: e:\temp (Access is denied)
    at java.io.FileOutputStream.open(Native Method)
    at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
    at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
    at org.apache.commons.fileupload.disk.DiskFileItem.write(DiskFileItem.java:390)
    at org.apache.jsp.ProcessFileUpload_jsp._jspService(ProcessFileUpload_jsp.java:83)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:80)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:818)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:373)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:464)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:358)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:818)
    at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:398)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:277)
    at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:258)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:189)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:611)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:564)
    at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:81)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:193)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:611)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:564)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:558)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1067)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:611)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:564)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:558)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1067)
    at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:255)
    at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:618)
    at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:549)
    at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:790)
    at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:326)
    at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:248)
    at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:199)
    at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:345)
    at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
    at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:93)

    Hi, I've been stuck on this for the past few days and
    I am quite new at developing web application.
    Here is the problem that I am having, I don't know
    why it keeps on saying "access is denied" when I can
    see that the file is uploaded to the directory. I am
    developing a JSP page file upload using Jakarta
    Fileupload v1.2. However, every time when I try to
    upload a file to a local path (e:\temp)Hi there,
    Typically in a Web Container, applications are deployed to a folder called webapps (this is the case in Tomcat, I'm not sure about Glassfish)
    So the directory structure is something like C:/Tomcat/webapps/MyApplication/other folders......
    When you upload a file , you normally can upload it only to a folder under your application and not to a folder outside the application.
    First you can try to upload the file to a folder under the webapp and not outside the webapp, once you get that to work --- then internally in the Servlet you can write code to save the file to any directory on the server, but the Servlet must be located on the server.

  • Server 2012 R2 - "Access is denied." error

    so this has been happening ever since i've installed Windows updates on our accounting server(windows server 2012 r2), and upgraded the RAM on the VM server(all these Server 2012 R2's are hosted on a VMware 5.5, client & server) . Sometimes, when trying
    to log in as an Active Directory user via RDP, i'll get an "Access is denied" error. This occurs for 3 different users, all of whom are domain admins. When this done happen, I'm only able to log in as the local machine administrator. Our AD server
    is also a 2012 R2.
    Some things to note:
    1) I can ping to the AD server, and ping from AD to the accounting server in question- all traffic is allowed over a VPN connection, and no traffic is being blocked by the firewall. Windows Firewall is turned off completely for both servers. Tracert finds
    both servers in 3 hops, but times out on the 2nd hop. also, the preferred DNS server for the accounting is the IP address for the primary domain controller.
    2) The time is the same on both the AD and accounting servers(at least when logged in as a local admin on the accounting server). Most of the most recent Windows updates are installed on both.
    3) I've tried removing the accounting server from the domain, and adding it back to the domain, and removing the accounting computer object in AD- the computer object was never added back after rejoining the domain, automatically or manually.
    3) I can't run a gpupdate on this accounting server. It returns this error:
    Computer policy could not be updated successfully. The following errors were encountered:
    Windows was unable to determine whether new Group Policy settings defined by a network administrator should be enforced for this user or computer because this computer's clock is not synchronized with the clock of one of the domain controllers for the domain. Because of this issue, this computer system may not be in compliance with the network administrator's requirements, and users of this system may not be able to use some functionality on the network. Windows will periodically attempt to retry this operation, and it is possible that either this system or the domain controller will correct the time settings without intervention by an administrator, so the problem will be corrected.
    If this issue persists for more than an hour, checking the local system's clock settings to ensure they are accurate and are synchronized with the clocks on the network's domain controllers is one way to resolve this problem. A network administrator may be required to resolve the issue if correcting the local time settings does not address the problem. User Policy could not be updated successfully. The following errors were encountered:
    The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windowswill automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when Group Policy is successful. To diagnose thefailure, review the event log or run GPRESULT /H GPReport.html from the command line to access information about Group Policy results.so this has been happening ever since i've installed Windows
    updates on our accounting server(windows server 2012 r2), and upgraded
    the RAM on the VM server(all these Server 2012 R2's are hosted on a
    VMware 5.5, client & server) . Sometimes, when trying to log in as
    an Active Directory user via RDP, i'll get an "Access is denied" error.
    This occurs for 3 different users, all of whom are domain admins. When
    this done happen, I'm only able to log in as the local machine
    administrator. Our AD server is also a 2012 R2.
    Some things to note:
    1) I can ping to the AD server, and ping from AD to the accounting
    server in question- all traffic is allowed over a VPN connection, and no
    traffic is being blocked by the firewall. Windows Firewall is turned
    off completely for both servers. Tracert finds both servers in 3 hops,
    but times out on the 2nd hop. also, the preferred DNS server for the
    accounting is the IP address for the primary domain controller.
    2) The time is the same on both the AD and accounting servers(at
    least when logged in as a local admin on the accounting server). Most of
    the most recent Windows updates are installed on both.
    3) I've tried removing the accounting server from the domain, and
    adding it back to the domain, and removing the accounting computer
    object in AD- the computer object was never added back after rejoining
    the domain, automatically or manually.
    3) I can't run a gpupdate on this accounting server. It returns this error:
    Computer policy could not be updated successfully. The following errors were encountered:
    Windows was unable to determine whether new Group Policy settings defined by a network administrator should be enforced for this user or computer because this computer's clock is not synchronized with the clock of one of the domain controllers for the domain. Because of this issue, this computer system may not be in compliance with the network administrator's requirements, and users of this system may not be able to use some functionality on the network. Windows will periodically attempt to retry this operation, and it is possible that either this system or the domain controller will correct the time settings without intervention by an administrator, so the problem will be corrected.
    If this issue persists for more than an hour, checking the local system's clock settings to ensure they are accurate and are synchronized with the clocks on the network's domain controllers is one way to resolve this problem. A network administrator may be required to resolve the issue if correcting the local time settings does not address the problem. User Policy could not be updated successfully. The following errors were encountered:
    The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windowswill automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when Group Policy is successful. To diagnose thefailure, review the event log or run GPRESULT /H GPReport.html from the command line to access information about Group Policy results.
    so GPResults.html shows this(domain and AD user hidden just in case):
    DOMAIN\ADuser on ACCOUNTING2
    Data collected on: 12/16/2014 1:02:44 PM show all
    Summaryhide
      During last computer policy refresh on 12/16/2014 12:56:05 PM
       A fast link was detected More information...
      During last user policy refresh on 12/16/2014 12:56:05 PM
       A fast link was detected More information...
    Computer Detailshide
    Generalhide
    Computer name ACCOUNTING2
    Domain Local
    Site (None)
    Security Group Membership hide
    Mandatory Label\System Mandatory Level
    Everyone
    BUILTIN\Users
    NT AUTHORITY\SERVICE
    CONSOLE LOGON
    NT AUTHORITY\Authenticated Users
    NT AUTHORITY\This Organization
    NT SERVICE\BITS
    NT SERVICE\CertPropSvc
    NT SERVICE\DsmSvc
    NT SERVICE\Eaphost
    NT SERVICE\hkmsvc
    NT SERVICE\IKEEXT
    NT SERVICE\iphlpsvc
    NT SERVICE\LanmanServer
    NT SERVICE\MMCSS
    NT SERVICE\MSiSCSI
    NT SERVICE\NcaSvc
    NT SERVICE\RasAuto
    NT SERVICE\RasMan
    NT SERVICE\RemoteAccess
    NT SERVICE\Schedule
    NT SERVICE\SCPolicySvc
    NT SERVICE\SENS
    NT SERVICE\SessionEnv
    NT SERVICE\SharedAccess
    NT SERVICE\ShellHWDetection
    NT SERVICE\wercplsupport
    NT SERVICE\Winmgmt
    NT SERVICE\wuauserv
    LOCAL
    BUILTIN\Administrators
    Component Statushide
    Component Name Status Time Taken Last Process Time Event Log
    Group Policy Infrastructure Success   12/16/2014 12:56:05 PM   
    Registry Success   12/12/2014 8:05:55 AM   
    Security Success   12/12/2014 8:06:01 AM   
    Settingshide
    No settings defined.
    Group Policy Objectshide
    Applied GPOshide
    Denied GPOshide
    Local Group Policy [LocalGPO]show
    Link Location Local
    Extensions Configured   
    Enforced No
    Disabled None
    Security Filters   
    Revision AD (0), SYSVOL (0)
    WMI Filter   
    Reason Denied Empty
    WMI Filtershide
    Name Value Reference GPO(s)
    None
    User Detailshide
    Generalhide
    User name DOMAIN\ADuser
    Domain domainname.local
    Security Group Membership show
    DOMAINNAME\Domain Users
    Everyone
    BUILTIN\Users
    BUILTIN\Administrators
    NT AUTHORITY\REMOTE INTERACTIVE LOGON
    NT AUTHORITY\INTERACTIVE
    NT AUTHORITY\Authenticated Users
    NT AUTHORITY\This Organization
    LOCAL
    DOMAINNAME\Backup Admins
    DOMAINNAME\Scans FTP Users
    DOMAINNAME\Scans FTP Admin
    DOMAINNAME\Domain Admins
    Authentication authority asserted identity
    DOMAINNAME\Denied RODC Password Replication Group
    Mandatory Label\High Mandatory Level
    Component Statushide
    Component Name Status Time Taken Last Process Time Event Log
    Group Policy Infrastructure Success   12/16/2014 12:56:05 PM   
    Settingshide
    No settings defined.
    Group Policy Objectshide
    Applied GPOshide
    Denied GPOshide
    Local Group Policy [LocalGPO]hide
    Link Location Local
    Extensions Configured   
    Enforced No
    Disabled None
    Security Filters   
    Revision AD (0), SYSVOL (0)
    WMI Filter   
    Reason Denied Empty
    WMI Filtershide
    Name Value Reference GPO(s)
    None
    Also, in the accounting server, i get multiple Microsoft-Windows-Security-Kerberos (codes 4 & 5)
    and
    Microsoft-Windows-GroupPolicy (codes 1030 & 1126) in the All
    Servers > Events page. Where can i find the "Details" tab for the
    error code and description?
    any help would be greatly appreciated. thanks!

    So I believe that I've fixed the time issue, but it still sometimes kicks off users on this accounting server, and gpupdate doesn't work. I have 2 domain controllers, and it seems that when this server queries the secondary domain controller(which was "screwed
    up", i was told by the previous IT guy who set this environment up), i get the Event ID 1030[GroupPolicy (Microsoft-Windows-GroupPolicy)] error and error # 4(Security-Kerberos) after the gpupdate fails.
    and Vivian, i do have a problem with AD replication. i cannot replicate the secondary DC with the primary DC. i get several event id 4 codes on the secondary DC.
    when i try to force a replication via AD Sites & Services > Sites... Servers > NTDS Settings of primary DC > Right-click > Replicate Now, i get the error:
    "The follow error occured during the attempt to contact the Domain Controller DCPRIMARYNAME(actual domain name hidden for privacy): The target principal name is incorrect."
    which is interesting, because i've seen this "target principal name is incorrect" error in several event viewer error codes in different Servers(all 2012 R2).

  • Oracle 11gR2 on Windows 2008 R2 - access denied error

    I just installed 11gR2 on a Windows 2008 R2. When I tried to unsecure the dbconsole I noticed that an "Access is denied" error is returned, so I am not able to use the stop/start/unsecure command from emctl.
    I am able to log in into the db and asm, but if I try to perform an imp/exp operation an create a log file from the operation I get an error EXP-00028: failed to open <log file name> for write.
    I have already turned off the firewall, but the problem persists.
    I know that Windows 2008 R2 has a lot of security enhancements that could cause issues, but I don't know what else I can turn off to deal with this situation.
    BTW, I am logged with an account part of the Local Admins. and it belongs to the group ora_dba.
    Thanks,
    Alberto

    This may be a little late but did you run the command line using the Run As Administrator option? Windows 2008 will return that error when trying to do certain privileged operations under regular user rights.

  • HT4623 Iphone 4s access denied error message when importing photos

    ok got iphone 4s in feb have used windows live photo gallery to import since i got the phone and never had any problems    started having problems with itunes not working say it was on a locked disk and/or didint have write permissions fixed this with a total uninstall and reinstall of itunes and now that works fine  but at the same time the itunes stopped working i started getting an access denied error when importing photos via usb via windos live photo gallery    i was however able to import my husbands photos from his ipad three days ago the same way i do my iphone and it worked fine with the ipad but not my iphone   so here is what i do click for click  i plug in the iphone via usb and the autoplay and itunes starts. i close itunes and go to autoplay click on import using windows live photo gallery than the pops open i check the folder to import too (which is on an exterial hard drive) and then i click import and it starts to import and on the very first photo and all photos the access is denied error message pops up   help please this is driving me crazy that it worked fine one day and now it doesnt work

    Good afternoon
    There seem to be a number of possibilities.
    Here is a thread that conatins a number of solutions.  The most common one is to load 50 pics at a time.
    https://discussions.apple.com/thread/3947440?start=0&tstart=0
    Hope this helps

  • Jsp error Message: Access is denied. on customers IE7 and IE8

    Hello,
    Here is a thing:
    Customer getting js error in IE7 and IE8. Firefox works fine.
    I am not able to reproduce on internal machine with ie8. also internally all works in ie9 (also in browsing modes ie7, ie8). and of course firefox works great internally as well.
    Error happens when they navigate back to caller page from popup page (SelectPG) by selecting not partial action. When they click on the commandImageLink popupPage get blanked (get white with no any information on it) and stays and IE showing yellow exlamation mark in the bottom left corner with error:
    Message: Access is denied.
    Line: 1
    Char: 53
    Code: 0
    URI: http://cusomer_host:7001/product/faces/selectFlow/SelectPG?_adf.ctrl-state=1paop64rm_38
    SelectPG is inside bounded taskflow which is ran as dialog from caller taskflow.Popup page SelectPG opens fiine and all information is displayed correctly, they can see table with all information do filtering on table etc...
    i dont have access to customer enviroment. and i am not able to reproduce this on any of our internal enviroments.
    kind of stuck here will appreciate any thoughts/hints/suggestions.
    thanks in advance!

    and it seems that to reproduce this - you can run any of your application which have taskflow's <inline-popup> with this kind of link:
    a href="http://weblogic:7101/yourproduce/faces/yourPage.jspx" target="_blank">go to your application </A
    for some reason target="_blank" makes popup not to be closed throwing the Access is denied error.
    Do you know if there is any patch for this? (updating jdev version is not the option)
    Edited by: user1175340 on Oct 4, 2012 8:03 AM

Maybe you are looking for

  • Version not triggerd in PO

    Dear Experts, Even though version management is maintained for Po document type, when creating PO 0 version is not triggered. in version tab blank is there. please let me know the reason for this. version mgmt settings are OK. Thanks in advance.

  • How do I get iOS 5 upgrade for my iPad?

    How do I get iOS 5 upgrade for my iPad?

  • FLASHBACK_TRANSACTION_QUERY not working

    I try the following and it always fails. Can somebody tell me why ? SQL> select * from v$version; BANNER Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE    11.2.0.3.0      Produ

  • Looking for Apple Motion Instructor in Orlando

    Greetings! I'm looking for an Apple Certified Motion professional who teaches classes (Orlando/Central Florida area). Is there a list of freelancers posted anywhere by region, or does anyone reading this thread teach? Can anyone point me in the right

  • How to use java 6 and uninstall java 7 ?

    Curently I'm facing some problem uninstall java 7, whenever I delete java 7 and install java 6,  when i check on my java -version it is showing java version "1.7.0_09". How can use java 1.6 instead of 1.7 ? Please help thanks.