Access Level Management for Lync2013

In Microsoft Communicator 2007, there was an option to set the 'Access Level Management' as a global setting. Is this feature still available in Lync 2013 apart from setting the 'Access Levels' for each contact individually.
Since we migrated from Microsoft Communicator 2007 to Lync2013 and we needed to change some 'Access Levels', I wasn't able to do so. So would like to check if this feature can be enabled or disabled at the global level.
Thanks. Any suggestions would be highly appreciated.
BR,
Frieda

Hi,
In Lync 2013, you can view the contact in turn of Relationship as following:
You can modify the relationship of the contact by right click the contact, and choose "Change Privacy Relationship", then you can choose the relationship you want such as Workgroup, Blocked Contacts.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Similar Messages

Accessing Enterprise Manager for multiple db's on same machine

I've installed Oracle 11g Enterprise Edition (basic installation with starter database) on my laptop. I've created two databases and the link to
access Database Control (Enterprise Manager) for each is as follows
[https://192.168.2.3:5500/em]
[https://192.168.2.2:1158/em]
I cannot access either of them. I've tried [https://localhostname:####/em,] still no access.
The system variable(s) ORACLE_HOME is not currently defined. I've tried to define it as follows, ORACLE_HOME=C:\app\product\11.1.0\db_1.
In Windows XP services OracleDBConsoleMyDB1 and OracleDBConsoleMyDB2 each service is
set to Automatic . . . but neither shows current status.
The databases are up and running, I can connect and query from each.
How can I get the web interface to Enterprise Manager to work?
Thanks.

Ok, I found the two directories;
C:\app\product\11.1.0\db_1\oc4j\j2ee\OC4J_DBConsole_192.168.2.2_alpdev
C:\app\product\11.1.0\db_1\oc4j\j2ee\OC4J_DBConsole_192.168.2.3_cnpdev
I also found these two as well;
C:\app\product\11.1.0\db_1\192.168.2.2_alpdev
C:\app\product\11.1.0\db_1\192.168.2.3_cnpdev
My machine name is xxxxxx1700, so I had to make the following changes to get
any meaningful output.
Renamed directories (folders) under C:\app\product\11.1.0\db_1
to xxxxxx1700_alpdev and xxxxx1700_cnpdev, OC4J_DBConsole_xxxxx1700_alpdev did not work,
neither did OC4J_DBConsole_xxxxx1700_alpdev.
Under C:\app\product\11.1.0\db_1\oc4j\j2ee, created two new directories OC4J_DBConsole_xxxxx1700_alpdev
and OC4J_DBConsole_xxxxxx1700_cnpdev and copied contents into these two folders from
OC4J_DBConsole_192.168.2.2_alpdev and OC4J_DBConsole_192.168.2.3_cnpdev.
I then SET ORACLE_SID's;
C:\> set ORACLE_SID=alpdev
C:\>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://192.168.2.2:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...The OracleDBConsolealpdev service is starting.
The OracleDBConsolealpdev service could not be started.
A system error has occurred.
System error 3 has occurred.
The system cannot find the path specified.
C:\>set ORACLE_SID=cnpdev
C:\>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://192.168.2.3:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...The OracleDBConsolecnpdev service is starting.
The OracleDBConsolecnpdev service could not be started.
A system error has occurred.
System error 3 has occurred.
The system cannot find the path specified.

Multiple Access Level Management

Let's say there are 8 pages on a web site. Each of the pages
until now has had a different access level defined in the database.
A user logs in, and access levels are checked via the predefined
levels on the pages he is attempting to view. Now users begin to
require access to different combinations of the 8 pages. So user A
might require page 1, 3, 5, 7 user B 1, 2, 3, 4 and user C wants 2,
4, 6, 8.
Is there a way to tell coldfusion to examine a string in the
access level field in which case a 1 means grant access and a 0
means no access? In other words, a string of 11001000 would grant
access to page 1,2 and 5 while a string of 00011100 would grant
access to 4, 5 and 6.
It seems as though this should be relatively easy, but after
searching the documentation, I cannot find any solution.

It would be easier to store individual database records
resembling
user_id has_access_to
1 1
1 3
1 5
etc

Managing "Access Levels" on a domain level from Lync 2010 client

Hello,
Our company moved from Office Communicator 2007 R2 clients to Lync 2010 clients.
Previously in Office Communicator 2007 R2 client, it was possible to set default Access Levels for complete domains (instead of individual users only), using the Access Level Management view.
In the Lync 2010 this options seems to be missing. The management options per user are still there (by right-clicking a user), but the access to manage it for a domain is no longer visible.
Is there any way to manage Access Levels for domains, in a similar way we had in Communicator 2007? It appears that Lync 2010 stilluses the Access Levels set previously for domains, but users do no longer have any possibility to make further updates,
and are stuck (from their perspective at least) with the settings made in 2007 before.
Thanks.

Lync 2010 doesn’t have the feature natively.
With Lync Server 2010, by default, the contacts from federated domains are added as External Contacts.
Lisa Zheng
TechNet Community Support

How to include group access level in a ws call

I want to include a Group Access Label in a Permission for a Course using an iTunes web service call.
I don't see how to do this in the docs.
(The example in iTunesUAdministratorsGuide.pdf at page 111 doesn't include the Group Access Label.
And it's not in the schema for the ws xml document at http://deimos.apple.com/iTunesURequest-1.0.xsd)
Is this an obvious omission or am I missing something? Anyone know how to do this?
Background:
We're creating most Courses programmatically.
Obviously, we'd strongly prefer not to require an administrator to go into every Course and manually add a common Group Access Label to the Permission. (This manual piece is essentially what's now missing from the ws call or at least from my understanding of it.)
Either way -- manually by an administrator or programmatically -- our instructors would then be able to set Permissions themselves on any Group they create -- doing this themselves and without the help of an administrator.

To resume with a little progress made:
I have a Section
* with Access Level == Edit for Credential == Instructor@...${IDENTIFIER} with no Group Access Label, and also
* with Access Level == Download for Credential == Student@...${IDENTIFIER} with Group Access Label == Student.
I'm doing ws calls to add a Course including an identifier. This is successful, and I can then go into the iTunes client as Instructor@...${IDENTIFIER} (substitution made) and manually add Groups and change Access to each individually. (I'm adding Groups "Download", "Shared Uploads", and "Drop Box", changing the Access Level accordingly for Group Access Label "Student".
But naturally I want to do the manual part programmatically, to save n instructors from having to learn how to do this same thing and then to do it.
So I'm trying to change my ws call to add the Groups, including Permissions. Schema http://deimos.apple.com/rsrc/xsd/iTunesURequest-1.1.xsd doesn't include Group Access Label for Permission. What does this mean?
I've tried the actual Credential == Student@...${IDENTIFIER} (with IDENTIFIER substitution made before the call) and also Credential == Student (to see if I'm supposed to match the Group Access Label, instead).
For either of these trials, the ws call successfully adds the Groups and a ShowTree includes the Permissions for the Groups. But in the iTunes client user interface, it's as if I gave no Permissions in adding the Groups.
Am I approaching this wrong or is there a bug here?
(I haven't tried yet a separate call to add the Group Permissions, not wanting to suffer the processing wait of getting handles for the three Groups.)
Anyone else doing this? (successfully or not ) Thanks.

Access levels in dreamweaver cs4

Hi,
I have been playing around with dreamweaver cs4 using the tutorials and videos i have thanks to you guys.
I created a simple login mysql database and used the login features within dreamweaver cs4 which was great and so simple.
I have came across login to a secured site so many times over the past few years pulling down sample asp with access scripts and never getting it right.worked first time no problem.
however what i do also get asked is access level security for a secured area. i noticed in the login objects properties there was an option "secure page and get access level from database table" however what i want to be able to do is have it so an admin would see all contacts in the database but the individual agents only have access to their own assigned contacts.
i would be greatful anyone could point me in right direction from within dreamweaver to do this, also not sure how i would setup the table in mysql to reflect this?
any pointers or help would be greatly appreciated.
many thanks
andy

Not sure if this is what you want, at least it will give you an example
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<style>
body {width: 980px; margin: auto; background: #FEE49A;}
#header {height: 120px; background: #060;}
#article {height: 400px; width: 749px; float: right; background: #FFF; border-right: 1px solid #060;}
#aside {height: 400px; width: 228px; float: left; border-right: 1px solid #060; border-left: 1px solid #060; background: #CCC;}
#footer {height: 50px; background: #060; clear: both;}
</style>
</head>
<body>
<div id="header"></div>
<div id="aside"></div>
<div id="article"></div>
<div id="footer"></div>
</body>
</html>
Gramps

Accessing Enteprise Manager via Cluster Scan VIP

Hello all...
We have a few clusters set up, and we've been accessing Enterprise Manager for these via the cluster scan IP address. For some unknown reason we now cannot access two of the three OEM installations via the scan IP, only by the IP address of the first node. Unfortunately I wasn't involved in this stage of the setup and I'm not having a lot of luck finding docs relevant to this.
The clusters are running 11.2.0.2 Standard with the January 2012 patch set, and the nodes in the clusters with the issue don't have any problem pinging each other or the scan URL for the custer, if that's helpful.
Can someone point me in the right direction?
Thanks,
Dan
Edited by: ddenton on Apr 20, 2012 11:11 AM
Edited by: ddenton on Apr 20, 2012 11:18 AM

Ravi,
DB Control was set up independently of the database using "emca".
The scan name in the emoms.properties file does match up with what's listed when running the "srvctl config scan" command.
When I attempt to connect to the scan address from Node2 using the following command, I get this response:
[oracle@devdb2 ~]$ sqlplus username/[email protected]:1521/DEVDB
SQL Plus: Release 11.2.0.2.0 Production on Mon Apr 23 10:41:00 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
I have no problem tns pinging the scan name or the database name:
[oracle@devdb2 ~]$ tnsping devdb-scan.rp.db
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 23-APR-2012 10:42:10
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used HOSTNAME adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROTOCOL=TCP)(HOST=10.10.10.130)(PORT=1521)))
OK (0 msec)
[oracle@devdb2 ~]$ tnsping DEVDB
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 23-APR-2012 10:42:34
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = devdb1-vip.company.com)(PORT = 1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = devdb2-vip.company.com)(PORT = 1521)) (LOAD_BALANCE = yes) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DEVDB.company.com)))
OK (0 msec)
Connecting using the following command directly to the TNS name for the database works too, so I'm a bit confused as to why specifying the scan name with port doesn't...
[oracle@devdb2 ~]$ sqlplus username/password@DEVDB
SQL*Plus: Release 11.2.0.2.0 Production on Mon Apr 23 16:16:40 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Release 11.2.0.2.0 - 64bit Production
With the Real Application Clusters and Automatic Storage Management options
SQL>
##################################

Multiple access level Webi Reports

Hi,
We have Business Objects Enterprise XI 3.1 SP2 FP2.4. Our problem is that we want to asign to the same user diferent levels of visualization for a webi report, but if we asign the security at application level (WebIntelligence) the access levels applies for all reports and if we assign the access level at folder level it doesn´t applied to the visualization of the report. Basically we want that a user see a WebiReport without refresh the data and the same user saw a diferent report in a diferent folder with the capability to do this action.
Is this possible??
Thanks a lot.

Hello,
I apologize for not replying earlier. I tried to reproduce what you mentioned. InfoView kept crashing on my end when I disable right-click.
In any case, you mentioned that disabling right-click only works when applied on on the application level (for Webi). We can work with this itself.
Again, for sake of simplicity, lets assume that we have only two access levels.
1. Right_Click_Disabled
2. Toolbar_Disabled
Also, lets assume that a specific user requires the Right_Click_Disabled access level on Rep_1 in Folder_A and the Toolbar_Disabled access level on Rep_2 in Folder_A.
For this, you'll need to create two groups. Lets call them Right_Click_Disabled_Grp and Toolbar_Disabled_Grp. Add the user to both groups. Also apply access level Right_Click_Disabled to Webi (application) for group Right_Click_Disabled_Grp (principal).
Similarly, apply access level Toolbar_Disabled to Webi (application) for group Toolbar_Disabled_Grp (principal).
Now, give both groups View access on Folder_A. So, the user will have the most restrictive access of the combination of ViewRight_Click_DisabledToolbar_Disabled for all Webi reports in Folder_A.
Now, for Rep_1 in Folder_A, the user requires Right_Click_Disabled access. So, for Rep_1 in Folder_A, for principal Right_Click_Disabled_Grp, disable inheritance and give the group Right_Click_Disabled (access level) only for Rep_1. Similarly, for Rep_2 in Folder_A, the user requires Toolbar_Disabled access. Again, for Rep_2, for principal Toolbar_Disabled_Grp, disable inheritance and give the group Toolbar_Disabled (access level) only for Rep_2.
Summary:
Groups
Right_Click_Disabled_Grp
Toolbar_Disabled_Grp
Access Levels
Right_Click_Disabled
Toolbar_Disabled
Let me know if you have any questions.Also, note that I haven't tested this.
Best.
Srinivas

Unable to access Skype Manager

I've been unable to access Skype Manager for 8 days now. My account works fine to log in regularly via the skyep app (to make calls, chat, etc), and I can even login to the skype site to change settings for that account. I just can't get into the Skype Manager. When I do, I see an error message (screenshot below) either after I'm prompted for my login credentials, or immediately upon clicking the Skype Manager link if I'm already logged in.
When I chat or email Skype support, they either claim that it's working fine, or they say that a "specialized department" (they always refuse to name the department when I ask) will take care of it and email me. The email invariably arrive a couple of days later telling me that everything is working fine, and if for some reason it's still not working, I should contact Skype chat support.
I tried reaching out to Claudius at @SkypeSupport via twitter and all I got back from him were these two non-specific and not-helpful tweets:
@mdavep I just successfully logged onmanager.skype.com in using IE9. Which browser are you using and which error do you see? ^CH
(when I answered his question he did not reply)
-and-
@mdavep Which page are you trying to login? Your web account page is here:skype.com/go/myaccount ^CH
(when I answered his question he did not reply)
My business is suffering as a result of these problems, as I am unable to reassign phone numbers to my sales teams and make changes to my tracked numbers for my ad campaigns. I'm probably losing about $250-$500 per day that this is not working.
Screenshot:

We've identified a login problem with Skype Manager and are working to resolve it as quickly as possible.
Sorry for the inconvenience (and confusion caused by my follow up tweet).
Unfortunately I can't share an ETA for the fix yet.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

NAC and BBSM access code management

Hello,
An organization has a network infrastructure in which a BBSM generates access codes for limited authorized time periods to allow Internet web access to wireless guests. If a guest exhausts the period he must request a new access code.
Now, if a Clean Access Server is deployed for admission control, a possible option could be to bypass posture assessment for those guest users and leave the the BBSM operation unchanged: with access code management for control and accountability purposes.
My doubt is if i could deploy some access code management capabilities in the NAC appliance, in order to move to it the access code mgmt functionality from the BBSM.
I would really appreciate any comment about that.
Thanks in advance.

Hi,
Check table 3 of the link below,
http://www.cisco.com/en/US/products/sw/netmgtsw/ps533/prod_eol_notice0900aecd805aeb23.html
Scrap that BBSM. You should be able to provide guest access w/ NAC. checkout this link
http://www.cisco.com/application/pdf/en/us/guest/products/ps6128/c1031/cdccont_0900aecd805b8b5c.pdf
Regards,
arburt

The next level manager is unable to view or access appraisal forms for all

I am facing an issue where in the next level manager is not able to see the appraisal docs of employees.
Follwing is the link that we found on SDN related to the same issue-
Next higher level manager should see the appraisal docs of the employees
During the PM testing, an issue was discovered with the existing logic of the Default Next Level Manager BADI.
When a manager manually reports to a NL managers organization unit, the next level manager is unable to view or access appraisal forms for all the employees who report to the manager.
For example,
NL Manager/Cheif: Susan
Manager/Chief: John
Employees: Mary and Matt
If Johns position (manager/chief) has a A 999 Reports to dotted line relationship to Susans organization unit (NL Manager), then Susan is unable to access, approve or reject the appraisal forms for Mary and Matt (Johns direct reports).
The relationship type is A 999 Reports to dotted line
Type of related object O (Organizational Unit)
We need to update the BADI in order for the next level manager to be able to access appraisal forms as described in the example above.
BADI implementation Name : Z_HRHAP00_DOC_DEF_DO
Method - IF_EX_HRHAP00_DOC_DEF_DO~DEFAULT_OTHERS
Now we are facing the following issue-
After identification of the employees who report to the managers organizational unit using the A 003 Belongs to relationship we are not sure how to pass these employees information from BADI to appraisal form, so that the previously identified Next Level Manager will be able to access, accept and reject appraisal forms for these employees.
For further details please refer the thread. I was not able to understand how this can be achieved.
Can anyone please mention in brief how I should be able to do this. I am new to this and I would appreciate any help .
Regards,
Satish.

There are no Function Modules to my knowledge. Pls try the transaction S_AHR_61016530 which would display the User's approvers as per hierarchy. This would bring datas from the HR tables. If this helps pls award points.

Handling page level access to users for sub-pages

Hi,
In my webcenter portal application, in navigation , I have mainpage1 and 3 sub-pages under it: subpage1,subpage2 and subpage3. We have a requirement that users with role manager should have access to all sub-pages under mainpage1 and users with role employee should have access to only subpage3.
All these 3 pages are created in Jdeveloper (not at runtime) and have static region for different taskflow on each page. All 3 taskflows have access permission to all authenticated users.
Using WebCenter Portal Administration Console, Resources tab I am setting access levels for user groups with Delegate Security as follows:
mainpage1 -- manager and employee both have view
subpage1 - only manager have view
subpage2 - only manager have view
subpage3 - manager and employee both have view
When I am logging as user with manager role , I am able to see all three pages, but when I am logging as employee the link mainpage1 and all other subpages are hidden.
I am able to set different access permissions for different groups at mainpages but facing issue for sub pages.
Please help me if I am missing anything for setting page level access.
Thanks and Regards,
Minal

Try to add the users instead of groups and see if you get same page access error?

Query for access level

There is table er_user_groups.ER_USER_GROUPS has username and group_id as fields.
This table contains data about all the groups which user belongs to.
If user is in each of group 29,30,31,32 then access level is basic.Please help me with Sql for this.
User might be part of more group ids but these is minimum crietira

Hi,
That sounds like a job for the COUNT function. Count how many of those groups each user is in, and pick the opnes where the count is 4.
Since I don't have a copy of your table, I'll use the scott.emp table (which almost everybody has) to illustrate.
Say we want to find which jobs are in each of the depatments 10, 20 and 30:
SELECT    job
FROM      scott.emp
WHERE     deptno IN (10, 20, 30)
GROUP BY job
HAVING    COUNT (DISTINCT deptno) = 3
Output:
JOB
CLERK
MANAGER
It doesn't matter if the same job appears in other departments or not; only rows with the given deptnos (10, 20 and 30) are considered.
As Greg said, see the forum FAQ: https://forums.oracle.com/message/9362002

Can't access Color Management options for HP 6700 under Mac OS 10.8.5 (Mountain Lion)

Hello.
I've got the HP Officejet 6700 Premium e-All-in-One and I can't find any way to access Color Management options.
The printer is attached (Wi-Fi) to my iMac running Mac OS 10.8.5 (Mountain Lion).
I want to correct a magenta cast to photographs that I've printed. I've had the magenta-cast problem under Lightroom and using Preview to print the photographs, so now I want to work with color profiles in Photoshop Elements.
Photoshop Elements recommends that I "disable color management in the printer preferences dialog".
However, I'm not able to find color management preferences for the 6700 in any of the settings under Mountain Lion:
Not under (Apple) > System Preferences > Print & Scan.
Not under (HP Utility) > Open Embedded Web Server.
Not under (HP Utility) > Printer Settings.
Not under Preview's print dialog.
Nor can I find any clear direction in the online help (at HP or elsewhere) that I've read so far.
Any suggestions would be most appreciated.
Thank you!
Michael
This question was solved.
View Solution.

Please note that in the Print dialog I get "Color Matching" not "Color Management."
Still, I am (at this point) able to control color from Photoshop Elements, so that's good enough to proceed.
Thanks again.

Do I have to configure realm policy in Access Manager for IDM SPML Request

Hi all,
I wanted to run a SPML request from my application to the IDM which is presently protected by an AM server. Somehow, I get the following error, while I run a search using SpmlClient:
org.openspml.util.SpmlException: Unsupported response content type "text/html", must be: "text/xml".
Do I have to set a policy in Sun Access manager for the realm? Guys, pls help.
Thanks,
Aneesh.

> I believe as long as you have access to the above two you can turn the CA off if you want.
Enterprise CAs are not intended to be offline. Therefore, you should not turn off them. If these root CAs issue certificates only to subordinate CAs, then you should consider to implement offline Standalone (not Enterprise) Root CAs.
> I believe the location of the CRL is detailed in the CDP which is detailed on the Certs issued but a given CA, so the client can look in the Cert and see what it states about the CDP and thereby get the list of revoked certs.
this is correct.
> to place its CDP at a location other than the default location in case it overwrites the existing CRL at the default location
no, CDP locations should be defined in the post-installation script.
> does the fully qualified X500 name of the CDP include the CA Name (and therefore be unique) and it will not over write the original
yes, LDAP URL includes CA server's NetBIOS name to differentiate between CAs.
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.

Access Level Management for Lync2013

Similar Messages

Maybe you are looking for