Access Report with repeating graph

Hello and thanks in advance for reviewing/suggesting where I am going wrong.
I have a report which displays a line chart for readings obtained for each system monitored. I use parameters in a query to define the data range for review. The proper data (for the appropriate date range) shows in the detail section of the
report. However, the chart (which shows for each system) always shows every reading record (earliest to last) regardless of my best efforts to pick and poke through how to tie the chart data to date range shown in the detail section. The chart
"changes" accordingly for each system but I get all dates instead of just those shown in the details section. Again, any assistance would be sincerely appreciated.

Hello Starain,
With regards to your inquiry regarding a pop up window at runtime / query results if run independent;
Yes, a dialog box opens which captures/passes the begin and end dates for the report. If I run the query "stand alone" (outside of the report), I get correct information. Through "trial and error" I have toggled the graph
data source options and have seen the same prompts for the graph (and in these instances the proper date range shows. However, I get a prompt for each system record. With up to 600+ systems records, that's a lot of keying in start/end dates).
To expand a bit, the graph is not in the detail section, it is in the "System" group. My "goal" is to have the graph use the query results which define what appears in the detail area without prompting for a begin and end date for
every System "group". Is there a way to "point" the graph data source to the record range that appears in the "details" section?
Thanks for your reply!!!
Regards,
SteveD

Similar Messages

Report with embedded Graph

Hello,
When generating a PDF file from an RDF file with an embedded pie chart, the graphic within the resulting PDF file is altered and does not look like the one in the report.
I am using Oracle 8i Release 8.1.5.0.0 and Report Builder 6.0.8.8.3
Thanks.

If you want to display 4 decimal places you need to set decimalDigit="4". Also, make sure nothing is happening to the value before your graph gets it that would cause it not to display correctly.
Here is what the DTD for graphs looks like for the ViewFormat element:

   <!ELEMENT ViewFormat EMPTY >
   You would put this inside your X or Y axis element like:
<Y1Axis lineWidth="1">
<ViewFormat decimalDigit="4" decimalSeparator="." decimalDigitUsed="true" decimalSeparatorUsed="true"/>
</Y1Axis>I don't see your X axis anywhere...maybe it it your "O1Axis" but I don't see that either, I only see "O1Title","O1TickLabel", etc.

CGI call to Oracle Reports with embedded graph not executing triggers on bars

I have the following function which is suppose to change the color of the bars in subgroups.
PROCEDURE Set_Group_Color(elem IN og_object, a_group_index number) IS
v_color varchar2 (32);
v_temp og_object;
v_idx number;
BEGIN
v_temp := OG_GET_OBJECT ('GRPG_NM1_GRPG_CNT_legend_label');
v_temp := OG_GET_PARENT (v_temp);
v_color := color_list (a_group_index);
og_set_bfcolor (elem, v_color);
og_set_ffcolor (elem, v_color);
v_idx := a_group_index * 2 + 1;
v_temp := OG_GET_CHILD (v_temp, v_idx);
-- 0 = legend_frame
-- 1 = border of color box (no name)
-- 2 = GRPG_NM1_GRPG_CNT_legend_label
-- 3 = border of color box of next group
-- 4 = GRPG_NM2_GRPG_CNT_legend_label
OG_SET_BFCOLOR (v_temp, v_color);
END;
This function is called from the format trigger of the bars themselves. The code works the way i want it to in the ORacle Graphics designer but when i executed from the web the triggers are not executed at all!!!
Am i forgetting to do something? Is this a known bug. When i put a format trigger on the graph axis-labels they execute correctly in both the designer and the web. But the bar triggers do not!

1. Along with this version of Reports you should find the reports server (r30mts on unix). This will allow you to deploy your reports on the web - on HP/UX or Solaris.
2. To web deploy you have:
Web Browser --->
Web Listener + Reports CGI ----->
Reports Server -->
RDBMS
3. You don't need the cartridge if you are using the CGI.
For more information, please look at the Reports Server Configuration whitepaper, available on OTN - it was written for Reports 6.0, but the concepts and architecture are applicable for Reports 3.0
Regards
The Oracle Reports Team http://technet.oracle.com

Generation PDF Report with Graph 6i

Hello all of u,
I have a problem to Generate 6i report with pie Graph in PDF format ,,
Report run well and at the bottom show the pie graph with different color
But when I Generate a PDF file, graph did not show and only back circle show
What is the problem with the oracle graph and why color did not shown?
Please help me
Thanks to all

Hi Julie,
Sorry my english.
I will try to explain in more details the problem.
I have identified that the bar code name into the PDF output is lowercase (mw6code39mt).
I only visualize or print the PDF output with the bar code when I manually alter that bar code name from lowercase to uppercase (MW6Code39MT).
I do that in my Unix server using the vi editor.
Please, see what I need to alter in the PDF output file on Unix server:
<</Type /Font
/Name /F1
/Subtype /Type1
/Encoding /WinAnsiEncoding
/BaseFont /mw6code39mt ====> alter to MW6Code39MT
/FirstChar 24
/LastChar 255
/Widths 9 0 R
/FontDescriptor 10 0 R
>>
endobj
Thank you.
Edson

I Published a report on the report server but it's not showing in the internal application we use to access reports

Hi,
I Published a report on the report server but it's not showing in the internal application we use to access reports. The name of the application we use is called MAMA and this application has access to all the reports on the SQL report server. My email is
[email protected] my cell phone number is 201-888-7952.
Thanks.

Hi Roger,
Based on my understanding, you publish a report on the report server. When you access reports with internal application, the report doesn’t display, right?
In your scenario, since you mentioned you have published the report to report server, please go to report manager, check if you can see the published report and open the report properly. If the published report is displayed on report manager, it should not
be the issue in Reporting Services. In this scenario, since the MAMA application has established connection with on report server, it may not update items on report server after you publish your report onto report server. So please try to “refresh” in MAMA
or reconnect the report server. If issue persists, I suggest you contact the MAMA application vendor to get some more effective advices.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

ALV report with dynamic columns, and repeated structure rows

Hey Guys,
I've done some ALV programming, but most of the reports were straight forward. This one is a little interesting. So here go the questions...
Q1: Regarding Columns:
What is the best way to code a report with columns being dynamic. This is one of the parameters the user is going to enter in his input.
Q2: Regarding Rows:
I want to repeat a structure(say it contains f1, f2, f3) multiple time in rows. What is the best way to do it? The labels for these fields have to appear in the first column.
Below is the visual representation of the questions.
Jan 06 , Feb 06, Mar 06....(dynamic)
   material 1
Current Stock
current required
$Value of stock
   material 2
Current Stock
current required
$Value of stock
   material 3
Current Stock
current required
$Value of stock
Thanks for your help.
Sumit.

Hi Sumit,
Just check this sample from one of the SAP site
ABAP Code Sample for Dynamic Table for ALV with Cell Coloring
Applies To:
ABAP / ALV Grid
Article Summary
ABAP Code Sample that uses dynamic programming techniques to build a dynamic internal table for display in an ALV Grid with Cell Coloring.
Code Sample
REPORT zcdf_dynamic_table.
* Dynamic ALV Grid with Cell Coloring.
* Build a field catalog dynamically and provide the ability to color
* the cells.
* To test, copy this code to any program name and create screen 100
* as described in the comments. After the screen is displayed, hit
* enter to exit the screen.
* Tested in 4.6C and 6.20
* Charles Folwell - [email protected] - Feb 2, 2005
DATA:
r_dyn_table TYPE REF TO data,
r_wa_dyn_table TYPE REF TO data,
r_dock_ctnr TYPE REF TO cl_gui_docking_container,
r_alv_grid TYPE REF TO cl_gui_alv_grid,
t_fieldcat1 TYPE lvc_t_fcat, "with cell color
t_fieldcat2 TYPE lvc_t_fcat, "without cell color
wa_fieldcat LIKE LINE OF t_fieldcat1,
wa_cellcolors TYPE LINE OF lvc_t_scol,
wa_is_layout TYPE lvc_s_layo.
FIELD-SYMBOLS:
<t_dyn_table> TYPE STANDARD TABLE,
<wa_dyn_table> TYPE ANY,
<t_cellcolors> TYPE lvc_t_scol,
<w_field> TYPE ANY.
START-OF-SELECTION.
* Build field catalog based on your criteria.
wa_fieldcat-fieldname = 'FIELD1'.
wa_fieldcat-inttype = 'C'.
wa_fieldcat-outputlen = '10'.
wa_fieldcat-coltext = 'My Field 1'.
wa_fieldcat-seltext = wa_fieldcat-coltext.
APPEND wa_fieldcat TO t_fieldcat1.
wa_fieldcat-fieldname = 'FIELD2'.
wa_fieldcat-inttype = 'C'.
wa_fieldcat-outputlen = '10'.
wa_fieldcat-coltext = 'My Field 2'.
wa_fieldcat-seltext = wa_fieldcat-coltext.
APPEND wa_fieldcat TO t_fieldcat1.
* Before adding cell color table, save fieldcatalog to pass
* to ALV call. The ALV call needs a fieldcatalog without
* the internal table for cell coloring.
t_fieldcat2[] = t_fieldcat1[].
* Add cell color table.
* CALENDAR_TYPE is a structure in the dictionary with a
* field called COLTAB of type LVC_T_SCOL. You can use
* any structure and field that has the type LVC_T_SCOL.
wa_fieldcat-fieldname = 'T_CELLCOLORS'.
wa_fieldcat-ref_field = 'COLTAB'.
wa_fieldcat-ref_table = 'CALENDAR_TYPE'.
APPEND wa_fieldcat TO t_fieldcat1.
* Create dynamic table including the internal table
* for cell coloring.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fieldcat1
IMPORTING
ep_table = r_dyn_table
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Get access to new table using field symbol.
ASSIGN r_dyn_table->* TO <t_dyn_table>.
* Create work area for new table.
CREATE DATA r_wa_dyn_table LIKE LINE OF <t_dyn_table>.
* Get access to new work area using field symbol.
ASSIGN r_wa_dyn_table->* TO <wa_dyn_table>.
* Get data into table from somewhere. Field names are
* known at this point because field catalog is already
* built. Read field names from the field catalog or use
* COMPONENT <number> in a DO loop to access the fields. A
* simpler hard coded approach is used here.
ASSIGN COMPONENT 'FIELD1' OF STRUCTURE <wa_dyn_table> TO <w_field>.
<w_field> = 'ABC'.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_dyn_table> TO <w_field>.
<w_field> = 'XYZ'.
APPEND <wa_dyn_table> TO <t_dyn_table>.
ASSIGN COMPONENT 'FIELD1' OF STRUCTURE <wa_dyn_table> TO <w_field>.
<w_field> = 'TUV'.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_dyn_table> TO <w_field>.
<w_field> = 'DEF'.
APPEND <wa_dyn_table> TO <t_dyn_table>.
* Color cells based on your criteria. In this example, a test on
* FIELD2 is used to decide on color.
LOOP AT <t_dyn_table> INTO <wa_dyn_table>.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_dyn_table> TO <w_field>.
* Get access to internal table used to color cells.
ASSIGN COMPONENT 'T_CELLCOLORS'
OF STRUCTURE <wa_dyn_table> TO <t_cellcolors>.
CLEAR wa_cellcolors.
wa_cellcolors-fname = 'FIELD2'.
IF <w_field> = 'DEF'.
wa_cellcolors-color-col = '7'.
ELSE.
wa_cellcolors-color-col = '5'.
ENDIF.
APPEND wa_cellcolors TO <t_cellcolors>.
MODIFY <t_dyn_table> FROM <wa_dyn_table>.
ENDLOOP.
* Display screen. Define screen 100 as empty, with next screen
* set to 0 and flow logic of:
* PROCESS BEFORE OUTPUT.
* MODULE initialization.
* PROCESS AFTER INPUT.
CALL SCREEN 100.
* MODULE initialization OUTPUT
MODULE initialization OUTPUT.
* Set up for ALV display.
IF r_dock_ctnr IS INITIAL.
CREATE OBJECT r_dock_ctnr
EXPORTING
side = cl_gui_docking_container=>dock_at_left
ratio = '90'.
CREATE OBJECT r_alv_grid
EXPORTING i_parent = r_dock_ctnr.
* Set ALV controls for cell coloring table.
wa_is_layout-ctab_fname = 'T_CELLCOLORS'.
* Display.
CALL METHOD r_alv_grid->set_table_for_first_display
EXPORTING
is_layout = wa_is_layout
CHANGING
it_outtab = <t_dyn_table>
it_fieldcatalog = t_fieldcat2.
ELSE. "grid already prepared
* Refresh display.
CALL METHOD r_alv_grid->refresh_table_display
EXPORTING
i_soft_refresh = ' '
EXCEPTIONS
finished = 1
OTHERS = 2.
ENDIF.
ENDMODULE. " initialization OUTPUT
Regards
vijay

Due to the requirement of a UUT report with pageheaders, I am looking for solution to print an MS Access report from TestStand. I am using TestStand 4.2 and LabView 8.6.

Solved!
Go to Solution.

You can customize your process model with LabVIEW steps. You can connect to the access database http://digital.ni.com/public.nsf/allkb/1D5EB4DCBD13106486256B9D005E11B0 you can also get the data and format it and print it with the report generation toolkit, or you could see if Access exposes those functions through an ActiveX server. What functionality exactly are you looking for, and at the end of the day how much time are you willing to develop your own customized microsoft access reporting function?
Richard S -- National Instruments --Applications Engineer -- Data Acquisition with TestStand

Creating a report with multiple Y-axes on one graph

I currently have a script that will create a report with either 1, 2, or 3 graphs and has the ability to have four graphs per plot. I would like to add functionality to this script by making the Y-axis on the graphs have multiple Y-axes. How can I programmatically create a graph with multiple Y-axes?

To create an new axis system use the command GraphObjNew, eg:
Call GraphObjNew("2D-Axis","2DAxis1")
Call GraphObjOpen("2DAxis1")
D2AxisBackColor = "blue"
Call GraphObjClose("2DAxis1")
Call PicUpdate
If you have DIAdem Version 10 you can also create a new y-axis using GraphObjYAxisNew. This command is not available in versions 9.1:
Call GraphObjOpen("2DAxis1")
AxisNo = GraphObjYAxisNew("left")
If AxisNo>0 Then
Call GraphObjOpen(D2AxisYObj(AxisNo))
D2AXISYTXT ="My new axis"
D2AXISYTXTFONT ="Arial"
D2AXISYTXTCOLOR ="red"
Call GraphObjClose(D2AxisYObj(AxisNo))
End If
Call GraphObjClose("2DAxis1")
Winfried
Message Edited by winner on 03-23-2006 03:48 PM

How to make report with access 2010 from SharePoint Discussion lists 2013

HI,
I want to make an access report from SharePoint Discussion lists 2013. When i open the list with access, the body of the list is in HTML format in access. Also if i reply something to one subject in the discussion, the reply is not mapped to that subject
but instead it is shown as a separate entry in the database.
Anyone can please help?
SAN
Santhiya
Santhiya

Hi Santhiya,
I have seen a similar post from you, my understanding is that you wonder that the reply is mapped to the related subject. You can take a look at Daniel's reply in the following thread:
http://social.technet.microsoft.com/Forums/en-US/dfb5bcb9-0076-412a-b34f-46aa9cfba876/how-to-make-report-with-access-2010-from-sharepoint-discussion-lists-2013?forum=sharepointgeneral
Thanks,
Wendy
Wendy Li
TechNet Community Support

Footer for a report with 2 repeating frames with down/across print directio

I have a report with a frame for title shown in first page. the content of the report is shown on two columns in a repeating frame(R2) which enclose an other repeating frame (R1). In R2, just after R1, I have a frame for totals. Both repeating frame have down/across print direction. All repeating frames and title frame are enclosed by a regular frame(let say frame A) that have vertical elasticity fixed. at the end of the report i must display an other frame(frame B) with signatures. I put frame B in frame A, just after R2. If I set vertical elasticity to fixed or contract for R2, when the title frame is missing i get an empty space in the bottom of the page(except the first page, where the title appear)(R2 is anchored to title frame). if I set vertical elasticity to variable for R2, the frame B is not shown on last page with records, but in next page. I need a solution to keep the frame B in last page of the report which have records. the problem appear only when I have records in second column.
Can somebody help me, please?

Hi,
I think without using Across/Down instead of Down/Across this is not possible. But then the output is
1 2 3 4
5 6 7 8
If you need to have
1 3 5 7
2 4 6 8
then you had to add some logic in an additional column for sorting the output. (sounds easy, but the logic need some work depending the count of records and their position.
Regards
Rainer

Email reports with graphs as HTML (via schedule)

== W2K machine with Oracle Reports Server 6i R2 ==
How can I schedule/design a report if sent via email (in HTML format), so the graph that is part of the reports shows up? Currently, the gif is missing. I can use the "hyperlink" in the web setting to point to the file on the web server, but this means my "customers" need to click the missing object.
If I send the report as PDF, all is well but again, my customers need to "open" the file.
Is there a way to email reports with graphs as HTML?
In any other format where the receiver does not have to take any other action?
Thx
Josh

My bursting SQL query:
SELECT DISTINCT
ip.APPL_ID KEY,
'11F_Search_Prospect_Email' TEMPLATE,
'RTF' template_format,
'en-US' locale,
'HTML' output_format,
'EMAIL' DEL_CHANNEL,
ip.email PARAMETER1,
'[email protected]' PARAMETER3,
'Welcome' PARAMETER4,
'true' PARAMETER6
FROM ugrad.inquiry_prospect ip,
ugrad.correspondence f,
ugrad.address e,
ugrad.f_lookup fl
WHERE ip.appl_id = f.appl_id
AND ip.APPL_ID = e.APPL_ID
AND fl.TYPE_CODE='C'
AND ip.record_stage = 'Prospect'
AND e.COUNTRY_CODE=fl.code
AND e.table_name = 'INQUIRY_PROSPECT'
AND e.address_type =
NVL ((SELECT gg.address_type
FROM ugradadm.address gg
WHERE gg.address_type =
DECODE (f.mailpref,
'Home', 'HOME',
'Best', 'LOCAL',
'HOME'
AND gg.table_name = 'INQUIRY_PROSPECT'
AND gg.APPL_ID = ip.appl_id
AND((gg.address_type='LOCAL' AND NVL(gg.address_expir_date,sysdate)>sysdate)
OR gg.address_type='HOME')),
'HOME'
AND f.batchid = :Batch_ID
This report when bursted sends an email with the layout template as html body.
The EMAIL configuration is set with a server Port number and its host address.

Is it possible to read MS Access report file .snp with Bold 9000

HI
I would like to read MS Access Report file .SNP generated by an internal application.
This file is part of an e-mail as attached object.
Is it possible to do this with my BB 9000?
Thank you in advance,
Nik

Hi and Welcome to the Forums!
Natively? No, I don't think so. Your choices are, I believe:
1) Seek out a 3rd party add-on app that will render that file type
2) Adjust the app that is generating the file and convert it to PDF before sending. Then, for as long as the item remains an email attachment, the email attachment service will be able to render the image on your BB. There are also add-ons (fee based) to enhance the quality of the rendering.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Report not display graph with desformat=HTML with PDF runs ok

Hi, I have a report (.rdf) which have a graph, when I run on oas with desformat=PDF it runs ok:
https://oasff:4444/reports/rwservlet?genprod&report=grafico.rdf&desformat=PDF
, but when i run with desformat=HTML or HTMLCSS doesn't show the graph:
https://oasff:4444/reports/rwservlet?genprod&report=grafico.rdf&desformat=HTML
i found on /opt/oracle/bi_forms/reports/cache the htm file and the jpg file, if i copy this files and run it on my pc on my jdeveloper shows the jpg with the graph ok, but on oas doesn't work......
any ideas .......
my oas is 10.1.2.3.0 on suse 10. And my reports is 10g.
thanks.

What do you mean by "different"? (In our
experience, Oracle html output has too many
columns, which are not visible in the
browser but are obvious in Excel.)
We build our own html programmatically, so
that Excel matches the browser more closely.
-- Allan Plumb

Report with graph

Hi all.
I've 2 problems:
I need to do a report display a graph with more than 6 period...
I saw that the "GRAPH_MATRIX*" functions use up to 6 elements for dimensions... I need at least 12 elements...
The graph must have 2 lines and the quantities for 12 months...
The other problem is the legend!!!
How can I do it?
Thanks a lot!
cv

I had 15 months... I used FM GFW_PRES_SHOW...I had only 3 lines across 15 months, but more can be used.... It's an interesting function module to work with....somewhat limited but presents a nice, usable chart. SAP demo program GFW_PRES_SHOW will give you some ideas on how to use the tool.

Print MS Access report to PDF with digital signatures.

I know it is possible to print a Microsoft Access report to a PDF file. However, we need to be able to add digital signatures to the resulting PDF. Is it possible to predefine the PDF signature fields in the Access database so that when the report is printed to PDF it is ready from employees to sign off on the PDF?

This is doable with the ability to do a security.importfromfile which provides the ability to import a certificate.
This is critical.
Just create the PDF and then open it up in Access. Be sure to have a reference to the Acrobat Type library.

Access Report with repeating graph

Similar Messages

Maybe you are looking for