Access restriction for PDF generated with Smartform
Hi there,
I am generating a PDF from a Smartform using convert_otf.
What I would like to do is, add restrictions for the generated document just like in Acrobat Professional.
For example:
Printing: yes/no
saving: yes/no
cut, copy paste: yes/no
Is there a way to pass this Parameters to the PDF?
Thanks in advance
Uli
Hello,
check this thread: Mailing PDF Attachment with Password Protected
Otto
Similar Messages
-
Generate URL in PDF made with Smartforms
Hallo,
i wanted Generate URL in PDF made with Smartforms, i have done everything necessary with cuastmizing and programing, the PDF ist working good, but afer clicking on the link in my PDF , it doesnt work, and with debbaging , the FM HR_RCF_SF_URL_CALLBACK it was not generated,
thank you for your helpHi,
Post your thread in Form Printing forum for better response , here is the link
Output Management
Cheers
bhavana -
WRT54GS Access Restriction for WiFi Connected Devices
I have the WRT54GS v4 running with the latest Firmware Version: v1.06.3 -- I am attempting to add Access Restrictions for a few MAC addresses and IP addresses (my kids iPod Touch and laptop).
I am simply wanting to deny total internet access from 9pm to 7am. I have gotten it to work but ONLY for computers that are actually plugged into the router (cat 5 internet cables). All the computers/devices that connect to the router via wifi do not seem to be restricted at all. I am thinking this is an issue with the router in that it ONLY seems to apply the Access Restriction rules to those devices that are actually directly connected by hardwire.
Has any one else noticed this issue for WiFi connected devices? Access Restrictions do not seem to apply to WiFi connected devices.
Please help -- I would hate to have to buy another router.Are you sure you have enter the correct MAC address or IP address? Wired connections use different MAC and IP addresses then wireless connection...
-
Access restriction for linksys WRV210
Greetings,
how can i make access restriction for more than 1 IP in linksys WRV210????
i dont want to use URL filtringHi korkomaz, I hope that answered your inquiry. Moving forward please refer to the link below as these products are now being handled by the Cisco Small Business Support Community.
https://www.myciscocommunity.com/community/smallbizsupport
Thank you.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router -
Problems installing PDF Generator with Workflow
Hello,
I was trying to combine PDF Generator with LiveCycle Workflow 7.2. I followed the instructions in the document 'Integrating Adobe LiveCycle Products'. Now I'm getting a Java error message when I try to access the Administrator login:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: com.adobe.admin.bean.FeaturesBean.validateUserSession(Ljavax/servlet/http/HttpServletRequ est;)V
org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:825)
org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:758)
org.apache.jsp.access_jsp._jspService(access_jsp.java:162)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
com.adobe.idp.um.auth.filter.PortalSSOFilter.doFilter(PortalSSOFilter.java:105)
com.adobe.framework.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:1 61)
root cause
java.lang.NoSuchMethodError: com.adobe.admin.bean.FeaturesBean.validateUserSession(Ljavax/servlet/http/HttpServletRequ est;)V
org.apache.jsp.access_jsp._jspService(access_jsp.java:97)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
com.adobe.idp.um.auth.filter.PortalSSOFilter.doFilter(PortalSSOFilter.java:105)
com.adobe.framework.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:1 61)
Has anyone also experience these kind of problem? Or has anyone an idea where this 'validateUserSession' function is located, which *.jar, *.war or *.ear?
BTW: I checked that Workflow in running properly before I installed PDFG.
Regards, KarinHello,
I think I found something: the webapp.jar in adminui.war in LiveCycle.ear contains the FeatureBean class and is different once I have PDF Generator included. I tried to exchange this jar file. Now I have access again to the administrator webapp.
However, I get an error message when I try to convert images with Acrobat:
"The service to convert the document could not be looked up."
Can this have something to do with the exchange? It's a strange error message because Acrobat is installed together with PDF Generator.
Or could it be because I have also Adobe Reader 7.0.8 installed?
Any ideas would be really appreciated.
Regards, Karin -
pdf opening in new tab shows problems with text. If pdf was generated with Adobe acrobat, works fine. If pdf generated with Bullzip, opens in new tab, but with problems.
hello lwhitman, the pdf preview in firefox is still under very active development. if you find any issues please report them at https://github.com/mozilla/pdf.js/issues & provide a sample pdf-file which shows the problem.
-
How do i solve the following error message that come with uploading to itunes Match: The itunes library file can not be saved. you do not have enough access privileges for this operation with windows xp
Bump.
-
Access Restrictions for Time?
I keep trying to set access restrictions for my wrt54g router for time. There is no 12 for time so I'm selecting 11:55 pm to 6am but I keep getting an error message of, "end time must be bigger then begin time." I get this no matter if I select 9pm, 10pm, etc.........
Any ideas?You cannot choose a time frame through midnight. You have to split it in two rules, one before midnight and one after, i.e. choose 12am to 6am and 9pm to 11:55 pm.
-
Password for PDF Generated from WEBI
Dear Folks,
I want to give password for PDFs generated from WEBI so that when a person receives scheduled pdf report in his mail,he gives a password to open it.pls let me know how that can be acheived?Hi Deepak,
This functionality is currently not supported by SAP Business Objects for WebI reports.Password protection is something that is done from the Adboe side. Kindly refer SAP note 1302401 to verify the same.
Regards,
Nakul Mehta -
Filename in Webdynpro for a PDF created with Smartform
Hi,
I created a PDF with Smartform in my Webdynpro-Application.
When I click the save button there is a default filename f.pdf .
How can I change the filename?
Regards
Marcus SchugHi Experts,
any update on this?
I am facing the same problem with ESS payslip (smartform/Hrform): my customer wants to have custom file name for download salery statements from the portal. Do you know how to change the default form name unknown.pdf to e.g.. "payslip_month_year"?
I spent a lot of time to find any possibility to get and change the file name but without success till now.
Please respond.
Regards,
Zdzislaw Kaczmarczyk
Edited by: Zdzislaw Kaczmarczyk on Jun 14, 2010 4:41 PM -
Remove 'Page Extraction' security restriction in PDF generated by ADS
Hello Experts,
I am currently working on a SAP CRM project where we are using Adobe Document Services (ADS) to generate some PDF documents from SAP.
I have an issue with the Page Extraction security restriction associated to PDF generated by ADS.
This cause a problem to us since we are expecting the PDF to be processed by Streamserve later on. Streamserve is then 'converting' the PDF in its proprietary format (.lxf) and is preparing a Post Script file for our printing partner.
I have understood that Streamserve cannot processed our PDF because of the Page Extraction restriction (out from ADS, value is set to Not Allowed by default).
I have seen the following posts in SDN:
Page extraction property in PDF document is set to 'not allowed'
Document Restriction Interactive Form
I am then getting concerned since it does not look as straightforward as I would have expected.
--> Can anyone confirm if there is a way to set the Page Extraction restriction as Allowed?
Via ADS configuration? Via code? Via some work in SAP (SFP, output device config...)?
In the above SDN posts, I can read things about buying a policy server, using Adobe Acrobat Pro or Reader Extensions.
Does anyone have a clear cut?
Thanks a lot.
Brice.Hello,
I don´t know how to make this work. I would open the OSS message for this and want SAP to give a workaround or say clearly this cannot be done. Well... in one of the mentioned threads it is mentioned that SAP said this is the right behavior but there was not a word about if that can be changed.
Otto
p.s.: probably it would be better for you to send only RAW data (i mean only XML data) and make the partner work with it. If the PDF is converted to "something" by a machine, then you don´t need PDF (what is a user GUI), to send only the data should suffice, or not? -
Hi,
We have installed Adobe LiveCycle PDF generator on Linux platform & to make it functional we need to install the open office. Do we really need to install the open office? Or it will work only by coping the open office lib files and setting the class path for OpenOffice_PATH?Hi all, I just wanted to extend this thread because i have a quick related question. We have a unix environment with pdfg installed but for whatever reason, open office was missed out in the installation, so whenever i try to run a pdfg service i get an error. Would simple installing openoffice suffice (an setting the environment variables), or would i have to reinstall pdfg? Unfortunately i don't have easy access to the server itself, so i'd like to try and be reassured that i'm going down the right path.
Thanks -
Access Restrictions still not working with latest firmware
Linksys WRT54GS V5 with firmware v1.52.2
I cannot believe what a frustrating experience this is. All I want to do is block facebook.com from my two high schoolers until they’ve done their homework.
Starting out, it simply did NOT work, and I discovered from this forum that the initial firmware did not work for this feature. So here is what I did:
- Downloaded v1.52.2 firmware, which is indicated as being the latest for this router
- Upgraded the router, per the instructions with this firmware.
- Pressed (and held)the reset button for the indicated 30 seconds
At this point, my router switched back to the default access point name and access password. Fortunately, I had backed up my configuration, so I then:
- Loaded my previous configuration that included my Wireless security settings, different AP name, etc...
- Powered down, then back up router, cable modem.
Router now works wireless as before, but Access Restrictions still does not restrict. Router does list the correct firmware on the admin screens.
Here is how I sent up my one (and only policy)
Internet Access Policy: 1(facebook)
Status: Enable
Enter policy name: facebook
PCs: Allow checked
Days: Everyday checked
Times: 24 hours checked
Blocked Services: NONE
Wewbsite Blocking by URL Addresses:
3 entered, they are:
http://www.facebook.com
http://static.ak.facebook.com
http://apps.facebook.com
Website blocking by keyword: All 6 boxes empty
This was easier to do on my old netgear router, and it also actually WORKED. ARGHHHHHHThanks, but that did not work either. It seems to me that, entering mac addresses ended up totally taking away all internet access for the computers on the MAC list. This is really pathetic that a concept that on the surface seems so simple, as in 'deny access to hostname xxx.com' can be so difficult to implement. If there wasn't the suggestion that this were a feature of the router, I wouldn't care. But it *is* supposedly a feature, and the feature simply does not work.
It seem to me that LinkSys has too many mutually exclusive options on a single page. It would be easier to grok if the hostname filter had it's own page, then you wouldn't be wondering what the 'deny/allow' check box did or did not do in conjunction with your selections.
Does the feature work or not? As I mentioned, this was childishly easy to accomplish on my Netgear router. If it didn't suck so bad in other areas of performance, I'd simply go back to it. -
Using LiveCycle PDF Generator with VSD viewer
Hi everyone,
Is it possible to use PDF generator to convert vsd files into pdf file with only installing a Microsoft VSD Viewer instead of the standard complete Microsoft Office Visio Install ?
Thanks,
ThomasYou can create a web service to convert html to pdf using the HTML to PDF converter library for .NET or the converter integratd in the Winnovative PDF Creator for .NET. You can download the development libraries from http://www.winnovative-software.com .
-
Reader X does not display drawing in PDF generated with LaTeX
I have a quite large PDF generated by pdfTeX, Version 3.1415926-1.40.11 which contains also XY-pic drawings rendered with Xy-pic version 3.8.2, PDF driver v.1.4.
One drawing does not display correctly in Adobe Reader X. Neither on Windows, neither on Mac. It does display correctly with following programs:
Preview on Mac OS X 10.5 and 10.6
Adobe Reader 9.x
Skim (skim-app.sf.net).
When I open this document with Adobe Reader X I get following error message when I hit page 58:
"An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem".
Where does one report rendering problems?
DamjanSee [https://support.mozilla.com/en-US/kb/Opening%20PDF%20files%20within%20Firefox Opening PDF files within Firefox]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Maybe you are looking for
-
Active Directory, single sign-on and SRM Users
We are in the process of installing SRM 7.0. using the Classic Scenario. I am seeking clarification around the creation of users in that system given the following: - My Basis colleagues are in the process of implementing single sign-on using Active
-
Error: 'Transaction type not possible (no affiliated company specified)'
Hello, I am trying to transfer an asset under construction to following asset class: 'low value assets' with ABUMN It get the error message: 'Transaction type not possible (no affiliated company specified)'. I could go to AO76 to mark the 'post to af
-
Caching AD login credentials not working with 10.5.5
Hello all, We are trying to add our Mac clients running OSX 10.5.5 as workstations in our Windows Domain (we are running AD in Windows 2003 native mode). I can add the Mac workstation to authenticate against the domain but login will only work if the
-
Default table scripts in ORACLE 9i
Hi, Is there an sql script which is available to create and populate the default tables in the SCOTT user. At the moment it has the EMP, DEPT, SALGRADE tables. But there is an another version of these tables and data: EMPLOYEES DEPARTMENTS JOB_GRADES
-
Extracting Purchase order details
Hai All, I am workng on a report in which I have to display the purchase order and GRN details for a given Purchase Requisition number. If the PR has 5 line items and PO is made only for 2 line items, then the purchase order details for on