Access the application folder by HTTP

Hi,
I did an application here to record the user's webcam and store an .FLV at my applications folder. That's ok.
But I want to retrive this .FLV using HTTP mode, to load the .FLV progressively, not by streaming. Got it?
For example, if I record a user webcam called "myWebcam":
myVideoClass.load("http://localhost/applications/my_app/myWe bcam.flv");
Using http (progressively), not rtmpt (streaming).
There is some way to do that? Or to move the file from applications folder to webroot?
Thanks and sorry for my english!

I think at the very least you'd need and http server running on your machine to do this, and also probably to copy the flv into a path the server can get to.

Similar Messages

When I move this version (3.6.12) to the application folder I get a message saying that I "do not have permission to access some of the items." I am the administrator with read and write rights. Any ideas?

When I move this version (3.6.12) to the applications folder on a new i-Mac, I get the message that I "do not have permission to access some of the items." I do have read and write rights on all applications and hard drive. Any ideas?

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

No more backup of the applications folder in Time Capsule

I realized that time machine didn't backup my applications. It worked OK 2 times after I setup the new 3TB time capsule but then it did stop end of July. I just realized it yesterday as i couldn't access a backup of the applications folder from last week.
Any suggestions? Is it a known problem

Yes, there is a known bug where some parts of the OS are not being backed up.
See D10 here. http://pondini.org/TM/Troubleshooting.html

Recording video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http.

As titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?
What I am trying to do, is to record a user's microphone's input and save it to the server. Afterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
How can I redirect the http request to the files I was recorded into my applications/appName folder? Or I need to somehow moved the recorded files to the /webroot folder?
Thanks!

I probably have asked a stupid question.
My recorded streams are still saved in the applications/appName/streams folder.
And I redirect the www.mydomain.com/streams to point to the applications/appName/streams folder.
And the rmtp recorded streams are abled to connect through http now.

I was asked to update my Foxfire which I did but at one point it said I would be prompted to move the Foxfire icon into the applications folder and I was never prompted to do so, therefore I do not know what to do next.

The new Foxfire version was downloaded into my download folder but I was never prompted, as it said I would be , so move the Foxfire icon into the applications folder. Therefore I do not know where the process stands. It old icon in my dock upgraded or has nothing happeded. It seems as if the process somehow just stopped in the middle.

Outside of the contact number for that you've already used I don't know another way of direct contact. Here are some things that they may or may not of had you try that might help you. If you will go to the settings app and pick general on the right-hand side you will see accessibility. Within that you can adjust a text size make the text bowl you can also increase the contrast. You can also adjust the brightness and control panel.
As for Siri again in the settings app under general you should see Siri on the right-hand side with the switch to turn it on. If that is turned on and you're still having issues
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

Not able to access the application through URL in clustered environment.

Hi,
I recently depoyed my application on clustered environment of weblogic 8.1 SP4.
Now I am able to access the application through the managed server name with port number but not able to access through URL.
For ex
http://machine1:7001/test/login.do?m=begin
this is accessible
If I use
http://test.domain.com/test/login.do?m=begin
Then application is not accessible.
any HTML or JSP page page is in reach by both the URL.
Please suggest me what should I do in this regard.
thanks
singhV

Hi Syed,
I meant to ask are you able to see the application you created in Hyperion Planning Login page,if yes try accessing the created application through Hyperion Planning(Try restarting Planning Services once even if you are able to launch hyperion planning page) url "http://servername:8300/HyperionPlanning and selecting the application you created.
And also could you please let me know if you are logging in to workspace through admin username ? and also check if you are able to see the application in shared services and try to provision any group on that application.
(The Assumptions are if application is not created successfully then it will not be available in workspace to launch and if its in maintainance mode (Application Maintenance Mode) in Application Settings and last would be check OHS and Hyperion Planning Services)
Thanks
Amith

How do i access the email folder on my macbook air?

how do i access the email folder on my macbook air?

OS X doesn't really encourage users to tamper with that folder. Instead, the idea is to use your email application to keep your mail data in order.
What are you trying to do?

I cannot install an application in the Applications folder without removing it first

For some time now, I have noticed that I cannot install an application into the application folder without first removing it from the folder. If I try to install it by dragging the icon to the application folder, I get a warning that the application can't be moved because the folder "Applications" can't be modified. I click on authenticate and enter the root username and password. I am warned that the application already exists in the location. I am asked if I want to replace the item. The options presented are "Keep both files", "Stop", and "Replace". I choose "Replace". I am then prompted for an administrator's name and password. I enter "root" and the root password. I then get this lengthy error message:
The operation can’t be completed because some items had to be skipped. For each item, choose File > Get Info, make sure “Locked” is deselected, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again.
I checked the permissions and "locked" was already deselected. The permissions grant my regular user read and write permissions, "staff" read-only, and "everyone" read-only. If I add "admin" with read and write permissions, nothing changes, i.e. I get the same error. If I try to enter my user credentials, they are rejected. My user is not an admin user. Previously, when I enterered the root username and password, the operation would complete successfully.
Now if I first remove the application from the Applications folder, then drag the application to the folder, I am prompted for an administrator's name and password. When I enter it, the application is copied successfully.
I have tried fixing file and directory permissions from the disk utility, but that doesn't fix the problem.

When you say, "locked" was already deselected, I take it that you mean the small icon at the bottom right of the Get Info window displayed an open lock picture.
Have you tried locking it, then unlocking it again? I expect you will be able to lock it by simply clicking on the open lock icon, but to unlock it again you will need to supply an Admin password.
Odd that DU didn't fix it. That would be my first thought also. Suggest trying it again, if you haven't already done so.
Speaking of DU, have you verified your HDD?
My Applications folder permissions read -
System          Read and Write
admin           Read and Write
everyone      Read only
Message was edited by: El Deanio

Itunes crashes when I try to access the podcast folder

I keep having a problem with accessing the podcast folder for my iPod Touch. I can access all of the other folders with no problem. As soon as I click on the podcast folder, a pop-up window appears telling that "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." I do click the "send error report" but this is maddening. It shuts down iTunes altogether. Any ideas? Thanks!

As soon as I click on the podcast folder, a pop-up window appears telling that "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
That one often seems to be due to an issue with a damaged podcast. Tracking down which podcast (or podcasts) is causing the grief can be a bit of a trial though. Jim's technique from the following post looks about the best way of doing it that I've seen:
http://discussions.apple.com/message.jspa?messageID=10653507#10653507

Deployed J2EE application successfully. But cannot access the application

I installed SAP Netweaver 2004s and tried to create a Web application and an ear file looking at the example given at
http://help.sap.com/saphelp_nw04/helpdata/en/7f/5c93acbd1343d4be7d79dc298faa7b/frameset.htm
I followed all the steps listed there. The deployment from the Developer Studio showed success. When I try to access the application using the url
http://localhost:50000/Calculator/Calculator.jsp I get the following error. I am not sure why it is looking at com.sap.engine.docs.examples for the file.
The requested resource /Calculator/Calculator.jsp is not available
Details: File [Calculator/Calculator.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
Please let me know what I am possibly doing wrong here. Any help is very much appreciated.

Hi Viji,
If you are opening the web browser from your desktop , instead of <localhost>, you should use the name of the machine on which your J2EE engine is installed.
Call the calculator application by entering its URL in the Web browser:
http://<host>:50000/<contextRoot>/<Name_of_JSP.jsp>
Where <host> is where j2ee is installed.
Regards,
Siddhesh

Corrupted file in the applications folder and i cant get in

I have a half uncompress file in the applications folder and it wont let me in to that folder, not even as a root user, it just closes the folder and opens desktop instead, everything else is working fine now, i hope i just need to delete that file. (all this is happening in my imac 27" late 2011 mountain lion)
the file is a game that does work in my other machine (macbook pro early 2011 mountain lion)

iOS: How to change the language when it's set to one you don't understand
http://support.apple.com/kb/HT2371
 Cheers, Tom

Why "Drag the Firefox Icon into the Applications folder" always pops up?

i follow the steps shown to install firefox on mac. Firefox is working well except every time when i lauch it, "Drag the Firefox Icon into the Applications folder" always pops up? Can you help me solve the problem?
Thank you!

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

I updated to OS X version 10.9 and now my applications in the applications folder are gone

When I click Finder-->katelynsmith(with the little house icon; under favorites)-->Applications folder all of the icons for my applications are gone (chess, iPhoto, etc.). However, when I search for "chess" (or any application names, for that matter), hilight the icon, and click the tiny applications folder on the toolbar on the bottom of the window (see photo attached), all of my applications are there and they still work.
Why did this happen and how can I get the applications back to the applications folder they used to be in? Do I need to just copy and paste all of them?
Thank you,
Katelyn

Welcome to Apple Support Communities
There are two Applications folders: /Applications (in the root level of the hard drive) and ~/Applications (in your user folder).
If you have a look at the bottom part of the screenshot, you can see where Chess is stored, and it indicates that it's stored in /Applications, so you are looking for applications in the wrong folder.
Open a Finder window, go to Finder menu (on the menu bar) > Preferences > Sidebar, and mark Applications. Then, close the Preferences window and you will be able to access to the Applications folder in the Finder sidebar. Another option would be to go to View menu (on the menu bar) and type:
/Applications

Deployed the EAR Application, but unable to access the Application's JSP's

I installed SAP Netweaver 2004s and tried to create a Web application and an ear file.
I followed all the steps. The deployment from the Developer Studio showed success. When I try to access the application using the url
http://server:port/WebModuleProject/test_jsp.jsp
I get the following error. I am not sure why it is looking at com.sap.engine.docs.examples for the file.
The requested resource /WebModuleProject/test_jsp.jsp is not available
Details: File [WebModuleProject/test_jsp.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
Please let me know what I am possibly doing wrong here. Any help is very much appreciated.

Hi Pankaj,
You need to define an application alias for your application before you publish your custom made application.
Check this link:
http://help.sap.com/saphelp_nw70/helpdata/en/96/910fcdfe1c384f8e17cf86947794cf/frameset.htm
For activating the alias check this link:
http://help.sap.com/saphelp_nw70/helpdata/en/66/23c11f7547824990467a2dac1a7308/frameset.htm
Regards,
Siddhesh

Access the application folder by HTTP

Similar Messages

Maybe you are looking for