Accessing column from matrix

I want to get the series no. from the matrix of Receipt from production.I tried accessing the value as ,
Dim txtSeries As SAPbouiCOM.StaticText
Dim matOrder As SAPbouiCOM.Matrix
Dim intI as integer
For intI = 0 To matOrder.RowCount - 2
txtSeries = matOrder.Columns.Item(2).Cells.Item(intI + 1).Specific
Next
But it gave the error of casting.

Change
Dim txtSeries As SAPbouiCOM.StaticText
into
Dim txtSeries As SAPbouiCOM.EditText

Similar Messages

MSSQLServer4 - Accessing columns from a select with the same name

The following describes a problem I'm encountering using the MSSQLServer4 driver...I have the following 2 tables (greatly simplified):
Create Table BOOK( BookId int, Name varchar(50), AuthorId int )
Create Table AUTHOR( AuthorId int, Name varchar(30) )
and my select is
Select BOOK.*, AUTHOR.*
From BOOK Inner Join AUTHOR On BOOK.AUTHORID = AUTHOR.AUTHORID
As you can see, the ResultSet from this select will have 2 identically named columns called "Name". I realize I could use an alias to differentiate the column names, but then I must list out every column in each table (quite ugly). I had EXPECTED to be able to do a resultSet.getString( "Author.Name" ), but that doesn't appear to work either. Next, I thought I could use the ResultSetMetaData.getTable()/ResultSetMetaData.getColumnName() to determine the ordinal value, but getTable() always returns "". Is there anyway to distinguish these two columns without using an alias?
Any help is greatly appreciated.
Regards...Marc

Marc wrote:
The following describes a problem I'm encountering using the MSSQLServer4 driver...I have the following 2 tables (greatly simplified):
Create Table BOOK( BookId int, Name varchar(50), AuthorId int )
Create Table AUTHOR( AuthorId int, Name varchar(30) )
and my select is
Select BOOK.*, AUTHOR.*
From BOOK Inner Join AUTHOR On BOOK.AUTHORID = AUTHOR.AUTHORID
As you can see, the ResultSet from this select will have 2 identically named columns called "Name". I realize I could use an alias to differentiate the column names, but then I must list out every column in each table (quite ugly). I had EXPECTED to be able to do a resultSet.getString( "Author.Name" ), but that doesn't appear to work either. Next, I thought I could use the ResultSetMetaData.getTable()/ResultSetMetaData.getColumnName() to determine the ordinal value, but getTable() always returns "". Is there anyway to distinguish these two columns without using an alias?
Any help is greatly appreciated.
Regards...MarcHi. getTableName() will never work because the DBMS doesn't send the necessary metadata with the result
set that the driver would need to implement that call. If you get 'Name' for multiple column names, JDBC specifies
that getXXX("Name") will always return the first such named column. The only non-alias way is to know
the columns you're going to get in order, and just do getXXX(1), getXXX(2) etc.
Joe

Combine CSV columns from multiple sources into one

Hi,
I am trying to import column from one CSV file and output it into additional columns on a Get-MailboxStatistics | Export-CSV command. The issue with the script I have created is that when use an Expression to create the new column it outputs all of the items
in the column from the import CSV into one row. See script below, I have highlighted the expressions that are not working.
Any assistance would be appreciated.
[Array]$Global:NotesMailSizeMaster = (Import-Csv c:\usermigration.csv).MailSizeMaster
[Array]$Global:NotesMailSizeRefresh = (Import-Csv c:\usermigration.csv).MailSizeRefresh
[Array]$Global:UserAlias = (Import-Csv c:\usermigration.csv).Alias
if (!(Get-PSSnapin |
Where-Object { $_.name -eq "Microsoft.Exchange.Management.PowerShell.Admin" }))
ADD-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin
$Output = ForEach ($Alias in $UserAlias)
{ Get-MailboxStatistics $Alias | select-object DisplayName, ServerName, StorageGroupName, Database, @{ Name = "TotalItemSize"; expression = { $_.TotalItemSize.Value.ToMB() } },
@{ Name = "NotesMailSize(PreRefresh)"; expression = { $NotesMailSizeMaster } }, @{
Name = "NotesMailSize(PostRefresh)"; expression = { $NotesMailSizeRefresh }
$filename = (Get-Date).ToString("yyyyMMdd")
$Output | export-csv -Path c:\"$filename-mailboxstats.csv" -NoTypeInformation

There's a lot wrong with this script:
1. You're importing the same file 3x; you should import one and reference the things you need out of it.
2. If the CSV has more than one row in it, your .notation you're using to access the MailSizeMaster, MailSizeRefresh, and Alias properties is used incorrectly. If you are trying to reference each of those properties from an array of different entries,
the proper way would be:
$Import = @(Import-Csv C:\usermigration.csv)
$MailSizeMaster = $Import | Select-Object MailSizeMaster
OR
$MailSizeMaster = $Import | Select-Object -Expand MailSizeMaster
...the "OR" is not PowerShell.
3. I don't know if you can concatenate different objects with the select-object cmdlet like you are. However, what you could do is create a custom object to load the values into and then output that object:
$filename = (Get-Date).ToString("yyyyMMdd")
foreach ($item in $Import) {
$MS = Get-MailboxStatistics $item.Alias
New-Object PSObject -Property @{
'DisplayName' = $MS.DisplayName
'ServerName' = $MS.ServerName
'StorageGroupName' = $MS.StorageGroup
'Database' = $MS.Database
'NotesMailSizePre' = $item.MailSizeMaster
'NotesMailSizePost' = $item.MailSizeRefresh
} | Select-Object DisplayName,ServerName,StorageGroupName,Database,NotesMailSizePre,NotesMailSizePost | Export-Csv -NoTypeInformation "C:\$($filename)-mailboxstats.csv"

Problem with checkbox column in matrix

Hello.
I have a little problem with checkbox column in matrix.
Column is binded to the UserData.
It has ValOn="Y", ValOff="N".
I use C++. It is wird problem. In matrix I have 10 columns - scrollbar role and if You want see checkbox column, You must role to the right. If this column is on the screen, and I use:
checkcell->PutChecked(VARIANT_TRUE);
then the checkbox is cheched, and if the checkbox isn`t on the screen and I use this comment - it nothing happening.
I tried to use ValOn="Y", PutChecked...
The problem i solved if the column is on the screen - if the column is first in matrix or second, but if it`s last I have a big problem.
My column with checkbox is not editable, but I tried to make it editable, check it, and then make it uneditable - the same efect.
How can I solve it ?
Sorry for my english.
Kamil Wydra

Hello Kamil,
I am not sure about your problem, but here is an example of how to use checkbox in UI API.
First, create the matrix with checkbox column in Screen painter, and the output is an xml file, like this. Type as 121 indicates that it is a check box.
- <column AffectsFormMode="0" backcolor="-1" description="" disp_desc="0" editable="0" right_just="0" title="Rented" type="121" uid="Rented" val_off="N" val_on="Y" visible="1" width="41">
<databind alias="U_RENTED" databound="1" table="@VIDS" />
<ExtendedObject />
Second, bind the column to table from DB. This is a bug of 2004 Screen Painter, so if you are using 2005 Screen Painter, there is no problem.
Third, when you open the form, you can check and uncheck the cell.
BTW, please set the editable of the column to true.
Hope this helps,
Nick

Error while trying to access dashboards from EPM

Hi
We integrated OBIEE 10.1.3.4 with EPM 11.2 and when we are trying to access dashboards from EPM we are facing the following error : "Invalid or could not find module configuration."
Please , help us in solving the above issue.
Thanks.

Hi all,
The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
In that case, you have to:
1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
Best regards,
Rudolf Hennecke
SAP NetWeaver RIG BI

Accessing tables from java

I am creating an inventory system. I have used Java for front-end where i have created forms which display the vendor table, customer table, item table, order table, invoice tbl etc.
I have created class files for each form that im displaying. i have also made connection to the oracle dbs succesfully. i can access data from the dbs.
but my problem is,
1)
for instance i have created a vendor_master table in oracle with certain constraints like vendor_number can contain only 5 varchar2 characters ,
eg.
create table vendor_master
(v_no varchar2(5) constraint v_no_pk primary key,
v_name varchar2(25),
v_add varchar2(15),
city varchar2(15),
st varchar2(15),
zip number(10),
tel number(11),
fax number(11));
now when i want 2 insert any row in the table i should be able 2 insert only "certain" characters of "certain" length depending on the constraints i have set. how do i do tht? coz java does not allow me 2 set the max chars like VB in the properties column
i have my vendor Master class file here:
code:--------------------------------------------------------------------------------
package mainpage;
import java.io.*;
import java.io.Serializable;
import java.awt.*;
import java.awt.event.*;
import java.lang.String.*;
import javax.swing.*;
import javax.swing.JPanel;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
import java.sql.Statement;
import java.sql.ResultSet;
import java.util.Vector;
import oracle.jdbc.driver.OracleDriver;
import oracle.jdbc.OracleResultSet;
import java.sql.PreparedStatement;
public class VendorMaster extends JPanel implements java.io.Serializable
JFrame venMastFrame = new JFrame("Vendor Master");
JLabel vennolbl = new JLabel();
JLabel venNamelbl = new JLabel();
JLabel venAdd = new JLabel();
JTextField venAddtxt = new JTextField();
JTextField venNotxt = new JTextField();
JTextField venNmtxt = new JTextField();
JLabel venCitylbl = new JLabel();
JTextField venCitytxt = new JTextField();
JLabel venStlbl = new JLabel();
JTextField venSttxt = new JTextField();
JLabel venZiplbl = new JLabel();
JTextField venZiptxt = new JTextField();
JLabel venTellbl = new JLabel();
JTextField venTeltxt = new JTextField();
JLabel venFaxlbl = new JLabel();
JTextField venFaxtxt = new JTextField();
JButton vPrevbtn = new JButton();
JButton vNxtbtn = new JButton();
JButton vExitbtn = new JButton();
JButton vNewbtn = new JButton();
JButton vDelbtn = new JButton();
JButton vUpdtbtn = new JButton();
JButton vSavebtn = new JButton();
int currentIndex = 0;
int totalRecords = 0;
private Vector vendorMasterRecords = new Vector();
public VendorMaster()
venMastFrame.setSize(850,760);
venMastFrame.setVisible(true);
//venMastFrame.show();
try
jbInit();
} catch (Exception e)
e.printStackTrace();
} // end of constructor
private void jbInit() throws Exception
Connection myConnection = DataManager.createConnection();
vendorMasterRecords = loadVendorMasterRecords(myConnection);
VendorMasterBean vmBean = null;
venMastFrame.getContentPane().setLayout(null);
if(vendorMasterRecords != null)
{ vmBean = (VendorMasterBean)vendorMasterRecords.elementAt(0);
totalRecords = vendorMasterRecords.size();
currentIndex = 0;
if(vmBean == null)
vmBean = new VendorMasterBean();
venNamelbl.setText("Vendor Name:");
venNamelbl.setBounds(new Rectangle(22, 87, 89, 23));
venNmtxt.setBounds(new Rectangle(153, 81, 224, 22));
venNmtxt.setEnabled(false);
venNmtxt.setText(vmBean.getVendorName());
venAdd.setText("Address:");
venAdd.setBounds(new Rectangle(25, 130, 113, 31));
venAddtxt.setBounds(new Rectangle(152, 126, 201, 22));
venAddtxt.setEnabled(false);
venAddtxt.setText(vmBean.getAddress());
vennolbl.setText("Vendor No:");
vennolbl.setBounds(new Rectangle(23, 41, 73, 22));
venNotxt.setBounds(new Rectangle(155, 38, 108, 22));
venNotxt.setEnabled(false);
venNotxt.setText(vmBean.getVendorNumber());
venCitylbl.setText("City:");
venCitylbl.setBounds(new Rectangle(25, 175, 61, 29));
venCitytxt.setBounds(new Rectangle(153, 172, 156, 24));
venCitytxt.setEnabled(false);
venCitytxt.setText(vmBean.getCity());
venStlbl.setText("State:");
venStlbl.setBounds(new Rectangle(25, 225, 64, 32));
venSttxt.setBounds(new Rectangle(152, 223, 158, 24));
venSttxt.setEnabled(false);
venSttxt.setText(vmBean.getState());
venZiplbl.setText("Zip:");
venZiplbl.setBounds(new Rectangle(24, 275, 58, 24));
venZiptxt.setBounds(new Rectangle(150, 272, 108, 24));
venZiptxt.setEnabled(false);
venZiptxt.setText(vmBean.getZipcode());
venTellbl.setText("Telephone No:");
venTellbl.setBounds(new Rectangle(25, 323, 106, 26));
venTeltxt.setBounds(new Rectangle(149, 326, 108, 26));
venTeltxt.setEnabled(false);
venTeltxt.setText(vmBean.getTelephone());
venFaxlbl.setText("Fax No:");
venFaxlbl.setBounds(new Rectangle(27, 375, 97, 26));
venFaxtxt.setBounds(new Rectangle(149, 375, 107, 26));
venFaxtxt.setEnabled(false);
venFaxtxt.setText(vmBean.getFax());
/* code for buttons */
vExitbtn.setBounds(new Rectangle(681, 457, 111, 29));
vExitbtn.setText("EXIT");
vExitbtn.addKeyListener(new VendorMaster_vExitbtn_keyAdapter(this));
vExitbtn.addActionListener(new VendorMaster_vExitbtn_actionAdapter(this));
vPrevbtn.setText("PREVIOUS");
vPrevbtn.addKeyListener(new VendorMaster_vPrevbtn_keyAdapter(this));
vPrevbtn.addActionListener(new VendorMaster_vPrevbtn_actionAdapter(this));
vPrevbtn.setBounds(new Rectangle(14, 457, 110, 29));
vPrevbtn.setEnabled(false);
vNxtbtn.setText("NEXT");
vNxtbtn.addKeyListener(new VendorMaster_vNxtbtn_keyAdapter(this));
vNxtbtn.addActionListener(new VendorMaster_vNxtbtn_actionAdapter(this));
vNxtbtn.setBounds(new Rectangle(124, 457, 111, 29));
vNewbtn.setText("NEW");
vNewbtn.setBounds(new Rectangle(235, 457, 111, 29));
vNewbtn.setActionCommand("NEW");
vNewbtn.addActionListener(new VendorMaster_vNewbtn_actionAdapter(this));
vNewbtn.addKeyListener(new VendorMaster_vNewbtn_keyAdapter(this));
vDelbtn.setText("DELETE");
vDelbtn.setBounds(new Rectangle(346, 457, 111, 29));
vDelbtn.setHorizontalAlignment(SwingConstants.CENTER);
vDelbtn.addActionListener(new VendorMaster_vDelbtn_actionAdapter(this));
vDelbtn.addKeyListener(new VendorMaster_vDelbtn_keyAdapter(this));
vUpdtbtn.setText("UPDATE");
vUpdtbtn.addActionListener(new VendorMaster_vUpdtbtn_actionAdapter(this));
vUpdtbtn.setBounds(new Rectangle(457, 457, 113, 29));
vUpdtbtn.setMaximumSize(new Dimension(71, 25));
vUpdtbtn.setMinimumSize(new Dimension(71, 25));
vUpdtbtn.setPreferredSize(new Dimension(71, 25));
/* Add all the txtboxes, lbls and buttons to the frame */
vSavebtn.setBounds(new Rectangle(570, 457, 111, 29));
vSavebtn.setText("SAVE");
vSavebtn.addActionListener(new VendorMaster_vSavebtn_actionAdapter(this));
venMastFrame.getContentPane().add(vennolbl, null);
venMastFrame.getContentPane().add(venNotxt, null);
venMastFrame.getContentPane().add(venNamelbl, null);
venMastFrame.getContentPane().add(venNmtxt, null);
venMastFrame.getContentPane().add(venAdd, null);
venMastFrame.getContentPane().add(venAddtxt, null);
venMastFrame.getContentPane().add(venCitylbl, null);
venMastFrame.getContentPane().add(venCitytxt, null);
venMastFrame.getContentPane().add(venStlbl, null);
venMastFrame.getContentPane().add(venSttxt, null);
venMastFrame.getContentPane().add(venZiplbl, null);
venMastFrame.getContentPane().add(venZiptxt, null);
venMastFrame.getContentPane().add(venTellbl, null);
venMastFrame.getContentPane().add(venTeltxt, null);
venMastFrame.getContentPane().add(venFaxlbl, null);
venMastFrame.getContentPane().add(venFaxtxt, null);
venMastFrame.getContentPane().add(vPrevbtn, null);
venMastFrame.getContentPane().add(vNxtbtn, null);
venMastFrame.getContentPane().add(vNewbtn, null);
venMastFrame.getContentPane().add(vDelbtn, null);
venMastFrame.getContentPane().add(vUpdtbtn, null);
venMastFrame.getContentPane().add(vSavebtn, null);
venMastFrame.getContentPane().add(vExitbtn, null);
} // end of jbinit
public static void main(String[] args)
VendorMaster vendorMaster1 = new VendorMaster();
} //end of main
/* this is where the data will be retrieved from the dbs */
protected Vector loadVendorMasterRecords(Connection connection)
//Connection connection = null;
Vector masterRecords = new Vector();
// From database getting values
try
//connection = connectionManager.getConnection();
Statement stmt = connection.createStatement();
String queryall = "Select * from vendor_master order by v_no";
ResultSet rs = stmt.executeQuery(queryall);
while (rs.next())
String vendorNumber = rs.getString("v_no");
String vendorName = rs.getString("v_name");
String address = rs.getString("v_add");
String city = rs.getString("city");
String state = rs.getString("st");
String zipCode = rs.getString("zip");
String telephone = rs.getString("tel");
String fax = rs.getString("fax");
VendorMasterBean vendorMasterBean = new VendorMasterBean(vendorNumber,
vendorName,
address,
city,
state,
zipCode,
telephone,
fax);
/* data retrieved from the vendormasterbean is then inserted in vector*/
masterRecords.addElement(vendorMasterBean);
} // end of while
} catch (Exception e) // end of try & start of catch
e.printStackTrace();
} // end of catch
finally
if(connection != null)
DataManager.freeConnection(connection);
return masterRecords; /* the data stored in
masterRecords is passed 2 vendormasterRecords*/
} // finally ends here
} // end of loadvendorMasterrecords
/*example- when previous button is pressed then an event is triggered
captured by the key listener and then actionPerformed method is called
which in turn calls the getPreviousRecord*/
/* to insert records */
protected void addVendorMasterRecord(VendorMasterBean vmBean )
Connection connection = null;
Vector masterRecords = new Vector();
// first check whether all the textboxes are empty
// also check whether there is already a record
//existing with the same v_no
// From database getting values
try
connection = DataManager.createConnection();
PreparedStatement newRecord = connection.prepareStatement("insert into vendor_master values(?,?,?,?,?,?,?,?)");
newRecord.setString(1,vmBean.getVendorNumber());
newRecord.setString(2, vmBean.getVendorName());
newRecord.setString(3, vmBean.getAddress());
newRecord.setString(4, vmBean.getCity());
newRecord.setString(5, vmBean.getState());
newRecord.setString(6, vmBean.getZipcode());
newRecord.setString(7, vmBean.getTelephone());
newRecord.setString(8, vmBean.getFax());
newRecord.executeUpdate();
// Insert statement
// PreparedStatement pStmt = ....;
// The assign each value in the vmBean to the pStmt
// and finally execute the pStmt
} catch (Exception e) // end of try and begin of catch
e.printStackTrace();
} // end of catch
finally
if(connection != null)
DataManager.freeConnection(connection);
}// end of if
} // end of finally
} // end of addVendorMasterRecord
void vNewbtn_actionPerformed(ActionEvent e)
/* First empty all the textboxes */
venNotxt.setText(" ");
venNmtxt.setText(" ");
venAddtxt.setText(" ");
venCitytxt.setText(" ");
venSttxt.setText(" ");
venZiptxt.setText(" ");
venTeltxt.setText(" ");
venFaxtxt.setText(" ");
venNotxt.setEnabled(true);
venNmtxt.setEnabled(true);
venAddtxt.setEnabled(true);
venCitytxt.setEnabled(true);
venSttxt.setEnabled(true);
venZiptxt.setEnabled(true);
venTeltxt.setEnabled(true);
venFaxtxt.setEnabled(true);
vPrevbtn.setEnabled(false);
vNxtbtn.setEnabled(false);
void vNewbtn_keyPressed(KeyEvent e)
/* to delete records */
protected void removeVendorMasterRecord(VendorMasterBean vmBean )
Connection connection = null;
Vector masterRecords = new Vector();
// From database getting values
try
connection = DataManager.createConnection();
PreparedStatement deleteRecord = connection.prepareStatement("delete from vendor_master where v_no = ?");
deleteRecord.setString(1, vmBean.getVendorNumber());
deleteRecord.executeUpdate();
// Delete statement for where condition pass the vendor number as parameter
//"delete from vendor_master where v_no = ?"
//PreparedStatement pStmt = ....;
// The assign v_no in the vmBean to the pStmt
// and finally execute the pStmt
} catch (Exception e)
e.printStackTrace();
finally
// After executing this new record should be removed from the Vector of results.
// uncomment this
if(connection != null){
DataManager.freeConnection(connection);
} // end of finally
} // end of removeVendorMasterRecord
void vDelbtn_actionPerformed(ActionEvent e)
String vendorNumber = venNotxt.getText();
String vendorName = venNmtxt.getText();
String address = venAddtxt.getText();
String city = venCitytxt.getText();
String state = venSttxt.getText();
String zipCode = venZiptxt.getText();
String telephone = venTeltxt.getText();
String fax = venFaxtxt.getText();
VendorMasterBean vmBean = new VendorMasterBean(vendorNumber,vendorName, address, city, state, zipCode, telephone, fax);
removeVendorMasterRecord(vmBean);
void vDelbtn_keyPressed(KeyEvent e)
/* To get next record */
protected VendorMasterBean getNextRecord()
VendorMasterBean vmBean = new VendorMasterBean();
if(currentIndex < totalRecords)
vmBean =(VendorMasterBean)vendorMasterRecords.elementAt(++currentIndex);
if(currentIndex == (totalRecords-1) )
// reached last, so disable the Next button
vNxtbtn.setEnabled(false);
// enable the Previous
vPrevbtn.setEnabled(true);
} // end of if stmt
} // end of outer if stmt
return vmBean;
} // end of getnextrecord
void vNxtbtn_keyPressed(KeyEvent e)
void vNxtbtn_actionPerformed(ActionEvent e)
VendorMasterBean vmBean = getNextRecord();
venNotxt.setText(vmBean.getVendorNumber());
venNmtxt.setText(vmBean.getVendorName());
venAddtxt.setText(vmBean.getAddress());
venCitytxt.setText(vmBean.getCity());
venSttxt.setText(vmBean.getState());
venZiptxt.setText(vmBean.getZipcode());
venTeltxt.setText(vmBean.getTelephone());
venFaxtxt.setText(vmBean.getFax());
/* to get previous record */
protected VendorMasterBean getPreviousRecord()
VendorMasterBean vmBean = new VendorMasterBean();
if(currentIndex > 0)
vmBean =(VendorMasterBean)vendorMasterRecords.elementAt(--currentIndex);
if(currentIndex == 0)
// reached first so disable the Previous button
vPrevbtn.setEnabled(false);
// enable the Next
vNxtbtn.setEnabled(true);
} // end of inner if stmt
} // end of outer if stmt
return vmBean;
} // end of previousrecord
void vPrevbtn_actionPerformed(ActionEvent e)
VendorMasterBean vmBean = getPreviousRecord();
venNmtxt.setText(vmBean.getVendorName());
venAddtxt.setText(vmBean.getAddress());
venNotxt.setText(vmBean.getVendorNumber());
venCitytxt.setText(vmBean.getCity());
venSttxt.setText(vmBean.getState());
venZiptxt.setText(vmBean.getZipcode());
venTeltxt.setText(vmBean.getTelephone());
venFaxtxt.setText(vmBean.getFax());
void vPrevbtn_keyPressed(KeyEvent e)
void vUpdtbtn_actionPerformed(ActionEvent e)
/* when the update button is pressed , only the v_no is disabled
vPrevbtn.setEnabled(false);
vNxtbtn.setEnabled(false);
venNmtxt.setEnabled(true);
venAddtxt.setEnabled(true);
venCitytxt.setEnabled(true);
venSttxt.setEnabled(true);
venZiptxt.setEnabled(true);
venTeltxt.setEnabled(true);
venFaxtxt.setEnabled(true);
//then the user should press the save button
void vExitbtn_actionPerformed(ActionEvent e)
venMastFrame.setDefaultCloseOperation(venMastFrame.EXIT_ON_CLOSE);
void vExitbtn_keyPressed(KeyEvent e)
void vSavebtn_actionPerformed(ActionEvent e)
String vendorNumber = venNotxt.getText();
String vendorName = venNmtxt.getText();
String address = venAddtxt.getText();
String city = venCitytxt.getText();
String state = venSttxt.getText();
String zipCode = venZiptxt.getText();
String telephone = venTeltxt.getText();
String fax = venFaxtxt.getText();
VendorMasterBean vmBean = new VendorMasterBean(vendorNumber, vendorName,address, city, state, zipCode, telephone, fax);
addVendorMasterRecord(vmBean);
} // end of vSavebtn_actionPerformed
} // end of class vendormaster
//Adapter classes
class VendorMaster_vNxtbtn_actionAdapter implements java.awt.event.ActionListener
VendorMaster adaptee;
VendorMaster_vNxtbtn_actionAdapter(VendorMaster adaptee)
this.adaptee = adaptee;
public void actionPerformed(ActionEvent e)
adaptee.vNxtbtn_actionPerformed(e);
class VendorMaster_vNxtbtn_keyAdapter extends java.awt.event.KeyAdapter
VendorMaster adaptee;
VendorMaster_vNxtbtn_keyAdapter(VendorMaster adaptee)
this.adaptee = adaptee;
public void keyPressed(KeyEvent e)
adaptee.vNxtbtn_keyPressed(e);
class VendorMaster_vPrevbtn_actionAdapter implements java.awt.event.ActionListener
VendorMaster adaptee;
VendorMaster_vPrevbtn_actionAdapter(VendorMaster adaptee)
this.adaptee = adaptee;
public void actionPerformed(ActionEvent e)
adaptee.vPrevbtn_actionPerformed(e);
class VendorMaster_vPrevbtn_keyAdapter extends java.awt.event.KeyAdapter
VendorMaster adaptee;
VendorMaster_vPrevbtn_keyAdapter(VendorMaster adaptee)
this.adaptee = adaptee;
public void keyPressed(KeyEvent e)
adaptee.vPrevbtn_keyPressed(e);
class VendorMaster_vExitbtn_actionAdapter implements java.awt.event.ActionListener
VendorMaster adaptee;
VendorMaster_vExitbtn_actionAdapter(VendorMaster adaptee)
this.adaptee = adaptee;
public void actionPerformed(ActionEvent e)
adaptee.vExitbtn_actionPerformed(e);
class VendorMaster_vExitbtn_keyAdapter extends java.awt.event.KeyAdapter
VendorMaster adaptee;
VendorMaster_vExitbtn_keyAdapter(VendorMaster adaptee)
this.adaptee = adaptee;
public void keyPressed(KeyEvent e)
adaptee.vExitbtn_keyPressed(e);
class VendorMaster_vNewbtn_actionAdapter implements java.awt.event.ActionListener
VendorMaster adaptee;
VendorMaster_vNewbtn_actionAdapter(VendorMaster adaptee)
this.adaptee = adaptee;
public void actionPerformed(ActionEvent e)
adaptee.vNewbtn_actionPerformed(e);
class VendorMaster_vNewbtn_keyAdapter extends java.awt.event.KeyAdapter
VendorMaster adaptee;
VendorMaster_vNewbtn_keyAdapter(VendorMaster adaptee)
this.adaptee = adaptee;
public void keyPressed(KeyEvent e)
adaptee.vNewbtn_keyPressed(e);
class VendorMaster_vDelbtn_actionAdapter implements java.awt.event.ActionListener
VendorMaster adaptee;
VendorMaster_vDelbtn_actionAdapter(VendorMaster adaptee)
this.adaptee = adaptee;
public void actionPerformed(ActionEvent e)
adaptee.vDelbtn_actionPerformed(e);
class VendorMaster_vDelbtn_keyAdapter extends java.awt.event.KeyAdapter
VendorMaster adaptee;
VendorMaster_vDelbtn_keyAdapter(VendorMaster adaptee)
this.adaptee = adaptee;
public void keyPressed(KeyEvent e)
adaptee.vDelbtn_keyPressed(e);
class VendorMaster_vUpdtbtn_actionAdapter implements java.awt.event.ActionListener {
VendorMaster adaptee;
VendorMaster_vUpdtbtn_actionAdapter(VendorMaster adaptee) {
this.adaptee = adaptee;
public void actionPerformed(ActionEvent e) {
adaptee.vUpdtbtn_actionPerformed(e);
class VendorMaster_vSavebtn_actionAdapter implements java.awt.event.ActionListener {
VendorMaster adaptee;
VendorMaster_vSavebtn_actionAdapter(VendorMaster adaptee) {
this.adaptee = adaptee;
public void actionPerformed(ActionEvent e) {
adaptee.vSavebtn_actionPerformed(e);
the following code is the vendorMasterBean class file- this file helps 2 assign data to the various textboxes.
code:--------------------------------------------------------------------------------
package mainpage;
public class VendorMasterBean
private String vendorNumber;
private String vendorName;
private String address;
private String city;
private String state;
private String zipcode;
private String telephone;
private String fax;
public int Mandatory_Value;
public VendorMasterBean()
} // end of constructor
public VendorMasterBean(String vendorNumber,String vendorName,String address,String city,String state,String zipcode,String telephone,String fax)
setVendorNumber(vendorNumber);
setVendorName(vendorName);
setAddress(address);
setCity(city);
setState(state);
setZipcode(zipcode);
setTelephone(telephone);
setFax(fax);
/* Set Method */
public void setVendorNumber(String vendorNumber)
try
if ( (vendorNumber == null) || (vendorNumber.length() <= 0) || (vendorNumber.length() > 5))
throw new ValidateException(ValidateException.MANDATORY_VALUE,
"Vendor Number");
} // end of if stmt
else {
this.vendorNumber = vendorNumber;
} // end of else
catch(Exception e)
e.printStackTrace();
} // end of setVendorNumber
public void setVendorName(String vendorName)
try
if((vendorName == null) || (vendorName.length() <=0 && vendorName.length() > 25))
throw new ValidateException(ValidateException.MANDATORY_VALUE,
"Vendor Name");
}// end of if
else
this.vendorName = vendorName;
} // end of else
} // end of try
catch(Exception e)
e.printStackTrace();
}// end of set method
public void setAddress(String address)
try
if((address == null) ||(address.length() <=0 && address.length()>15))
throw new ValidateException(ValidateException.MANDATORY_VALUE,
"Address");
else
this.address = address;
catch(Exception e)
e.printStackTrace();
public void setCity(String city)
try
if((city == null) ||(city.length()<=0 && city.length() > 15))
throw new ValidateException(ValidateException.MANDATORY_VALUE,
"City");
else
this.city = city;
catch(Exception e)
e.printStackTrace();
public void setState(String state)
try
if((state == null) || (state.length()<=0 && state.length() >15))
throw new ValidateException(ValidateException.MANDATORY_VALUE,
"State");
else
this.state = state;
catch(Exception e)
e.printStackTrace();
public void setZipcode(String zipcode)
try
if((zipcode==null) ||(zipcode.length()<=0 && zipcode.length() > 10))
throw new ValidateException(ValidateException.MANDATORY_VALUE,
"Zipcode");
else
this.zipcode = zipcode;
catch(Exception e)
e.printStackTrace();
public void setTelephone(String telephone)
try
if((telephone==null) || (telephone.length() <= 0 && telephone.length()> 7))
throw new ValidateException(ValidateException.MANDATORY_VALUE,
"Telephone");
else
this.telephone = telephone;
catch(Exception e)
e.printStackTrace();
public void setFax(String fax)
try
if((fax == null) ||(fax.length()<=0 && fax.length() > 7))
throw new ValidateException(ValidateException.MANDATORY_VALUE,
"Fax");
else
this.fax = fax;
catch(Exception e)
e.printStackTrace();
/* Get method */
public String getVendorNumber()
return vendorNumber;
public String getVendorName()
return vendorName;
public String getAddress()
return address;
public String getCity()
return city;
public String getState()
return state;
public String getZipcode()
return zipcode;
public String getTelephone()
return telephone;
public String getFax()
return fax;
/* end of get method*/
} // end of class
2) the 2nd error is in the save button method , everytme i try 2 save the inserted record it gives me an error.
in case u need my mainpage.java, here it is
code:--------------------------------------------------------------------------------
package mainpage;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.JPanel;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
//import java.sql.Statement;
//import java.sql.ResultSet;
import oracle.jdbc.driver.OracleDriver;
import oracle.jdbc.OracleResultSet;
public class MainPage extends JFrame implements ActionListener
public static String title = "Warehouse Management System";
JFrame frame = new JFrame();
JMenuBar menuBar = new JMenuBar();
JMenu viewMenu = new JMenu("VIEW");
JMenuItem vendorItem = new JMenuItem("Vendor Master");
JMenuItem custItem= new JMenuItem("Customer Master");
JMenuItem salesrepItem= new JMenuItem("Sales Rep Master");
JMenuItem itemmastItem= new JMenuItem("Item Master");
JMenuItem orderItem= new JMenuItem("Order Master");
JMenuItem invoiceItem = new JMenuItem("Invoice Master");
JMenuItem payItem= new JMenuItem("Payment Master");
JMenu transactionMenu = new JMenu("EDIT");
JMenuItem veneditItem = new JMenuItem("Vendor");
JMenuItem custeditItem = new JMenuItem("Customer");
JMenuItem saleItem = new JMenuItem("Rep Information");
JMenuItem itmeditItem= new JMenuItem("Item");
JMenuItem ordeditItem= new JMenuItem("Order");
JMenuItem inveditItem = new JMenuItem("Invoice");
JMenuItem payeditItem = new JMenuItem("Payment");
JMenu exitMenu = new JMenu("EXIT

2 parts to this
Limit characters in jtextfield using a custom document
http://java.sun.com/docs/books/tutorial/uiswing/components/generaltext.html#customdocument
Specify a custom editor (jtextfield) for jtable (or column)
http://java.sun.com/docs/books/tutorial/uiswing/components/table.html#validtext

Excel & ActiveX: Insert arbitrary columns from 2D array and create graph problems

Hi there,
I want to insert data from either a 1D or 2D array from LabView into Excel and create graphs.
I used the information from the following example:
http://www.ni.com/example/28934/en/
and was able to create a new Excel file (I'm using Excel 2010), writing data from an 1D array to a column in excel by creating a while loop and using the first element of the array to write it to a specific cell. I use the counter of the loop to write to the next cell when the loop starts over and always delete the first value, which I write to the cell, from the array until it is empty.
Now I also would like to write a 2D array - so the first column in Excel should be the first column from the array and so. Here I cannot use the loop counter directly as Excel only counts 1,2,... for the rows, but uses A,B,... to count columns. Also I do not know in advance how many columns my 2D array will contain, so creating a lookup table like (A means 1, B means 2,...) is not really an option (except there really is no other way). Is there a possibilty to convert numbers into letters or some way to 'explain' to the program that column 2 in the array means column B in Excel for example, or is there a way to insert new columns?
I figured out how to add new Worksheets and as I also need to create a certain number of Worksheets and I know that on standard 3 sheets are present when creating the file, I use the 'add' methode to create every new worksheets before worksheet 3 - I could use the same methode to create new columns in Excel, but so far I didn't find a methode to do so. Or is there a way to enter the whole 2D array at once?
Then I'd like to create a graph (in case of the 1D arrays a bar plot, when using 2D arrays a 3D plot) to view the data. I found this example:
http://www.ni.com/newsletter/51339/en/
-> as I do not have the toolkit I'd like to do it using ActiveX directly, so I tried to do things like shown under the headline 'DIY ActiveX/.NET'
I tried to load the snippet to a new Excel file but got the error message 'microsoft.office.interop.excel.dll not found' and hence the code is not working. That confuses me a little as I would guess when this dll is not present I cannot access Excel from LabView at all, though my understanding of what I'm really doing so far is quiet limited. ;-)
Also - as far as I understand from the snippet - when creating a new chart object I should be able the create methodes for it, however when I do a right click on the chart object of an ActiveX Worksheet symbol there are none listed.
To explain my problems better I added a snippet showing my two problems: The inner of the two while loops shows how I import a 1D array. In the outer loop I seperate the columns. I know that currently this is not working as all data end up in column A of the Excel sheet - so I would need to convert the number of the outer counter to A, B,... or find a different solution.
Moreover on the snippet I placed an ActiveX Worksheet Property with the Chart Object - as I can see the difference to the Chart Object in the example code from the last link above is the color. However I'm not sure what that means and how to change/ solve this.
And just to make sure - I know this way the VI does not run as the Chart Object is placed completely wrong - I just did it, so it is included in the snippet.
I'd be thankful for any suggestions,
Thanks!
Solved!
Go to Solution.
Attachments:
ExcelAreaScan.png ‏60 KB

Hello everyone and thanks for the answers.
I only have the LabView Student Edition available here - is the toolkit included in it too. How can I check if it is installed/ available and in case it is installed - where can I find it?
Today I had time to take a look at the example
Create via ActiveX Labview a XY Scatter plot graph on an excel sheet
It almost does what I want in terms of creating a graph. The only problem I could not fix, is that in this example a sheet is created where only the graph is present. i'd like to add the graph to a previously created worksheet. Today I tried get this working but it seems I stilll don't really understand what I'm doing, I'll post a snippet of my code as soon as I can access the PC with LabView on it again.
I also took a look at the other example for inserting 2D attays - it seems to be what I need, I just had no time so far to test it, I'll post an update when I could test it.
Thanks for the help so far!

Desc doesn't show datetime columns from SQl Server

Hi Everyone,
I have working db link to sql server using hsodbc:
Oracle 10.2 on AIX using freetds odbc driver version 0.82.
I can access tables on sql server but oracle sees only varchars and numerics columns in a table.
Is there a way to select datetime columns from sql server using hsodbc?

when hsodbc does not show a certain data type it is commonly related to the fact that HSODBC doesn't support the related ODBC data type.
In general you have a data type in your SQL Server which is mapped to an ODBC data type by the ODBC driver. HSODBC then maps the ODBC data type to an Oracle equivalent and when the ODBC data type isn't supported by HSODBC it just drops it from the select list.
So for a root cause analysis an ODBC trace is required to determine the mapping of the FreeTDS ODBC driver.
With this info we can then compare the mapping documented in the HSODBC manual and if the ODBC data type isn't listed as a supported data type you then need to cast the data type on the source side to a different data type (for example varchar/char).
So please post the ODBC trace and I'll have a look.
- Klaus
Edited by: kgronau on Apr 2, 2013 12:50 PM
BTW, here the link to the HSODBC docu:
http://docs.oracle.com/cd/B19306_01/server.102/b14232.pdf
Oracle® Database
Heterogeneous Connectivity Administrator's Guide
10g Release 2 (10.2)
B14232-01
B.1 Mapping ANSI Data Types to Oracle Data Types Through an ODBC
Interface

Howto use formula columns in matrix reports

Hello
How can i use a formula column in matrix report whose function would be
Formula_Column_Result=A-B where A=Cell A
B =Cell B
Regards
Fahad

Hii guys
I solved my problem on my own.
i wrote
SELECT * FROM EMP WHERE EMP.DEPTNO=P_DEPT_NO
and it worked.
Thanks guys..i luv this forum
Regards
Fahad Hameed

ACCESS column names containing spaces

Hi
I'm new to Java SQL programming and have come across a problem I can't seem to fix reharding ACCESS column names that contain spaces.
Here's the actual code :
sqlquery = "select * from cars,qualify where group2 = '" + addComponentsToDrivers.currentgroupcode + "' and cars.car id no = qualify.car id no";
here's the error java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'group2 = 'INTGT5' and cars.car id no = qualify.car id no'.
The question is how can I code qualify.car id no?
Thanks
Ken

and cars.car id no = qualify.car id noand cars.[car id no] = qualify.[car id no]

Cannot access columns in a result set using table alias in Oracle database

I have a query which joins a few tables. There are a few columns in various tables with identical names. In the query, I have assigned table aliases for each table thinking it'll be the manner in which I access a specific column in a specific database table. However, when trying to retrieve the column, I'm getting an exception stating "Invalid column name". I had no problem doing so in my last project when I was coding against MySQL database so this is likely to be a driver implementation issue. My current workaround is to assign a column alias though I find this to be annoying and it does make the query very verbose.
My question is whether this option is perhaps a configuration issue, a bug, or something that I'm missing. Also, I would like to know if anybody has an elegant workaround without accessing columns using their numeric index.
I'm querying an Oracle 10i database in a managed environment (database connection is obtained from a Weblogic data source).
Sample query:
select
a.address1,
d.address1
from
account a
inner join
department d on a.department_id = d.department_id
where
a.account_id = 1000;
When trying to access a ResultSet instance in the following manner, I will get an exception:
rs.getString("d.address1");
Retrieving "address1" will return the first column in the select clause.

jonathan3 wrote:
My question is whether this option is perhaps a configuration issue, a bug, or something that I'm missing. Since you already figured out that you can use an alias one can suppose that it is the last in that you are missing that you already have a solution.
You can try extracting the meta data to see if it has a name without the alias. Probably not.
Also, I would like to know if anybody has an elegant workaround without accessing columns using their numeric index.One can only suppose that you consider using names "elegant".

Read a Column from an Excel file

Guys,
Is there a way I can read a specific column from an excel file, use that data to query and select data from a table and then insert the output into another column of that same excel file.
Please advise! Thanks

> Is there a way I can read a specific column from an excel file, use that data to query and select data from a
table and then insert the output into another column of that same excel file.
Not easily. An Excel file is typically in a proprietary binary file format. Perhaps saved using the new MS Office XML format.. which would be possible to process via Oracle's XDB.
But assuming it is in a binary format, you need "something else" to read and parse that file for you - like ODBC or DDE or COM/DCOM, etc.
Oracle supports Heterogeneous Database Services. On a Windows Server, you can create a database link in Oracle that uses an ODBC driver to connect to an ODBC data source. There are ODBC drivers for Excel. However, this requires the data in the worksheet to be properly marked as a data table. Or did last time I looked at it about 2 years ago.
You can also call external "interfaces" from PL/SQL using EXTPROC - such interfaces can be DLLs. Which means you do have access to the Win32 API and application APIs from PL/SQL. This can be used to access the content of an Excel file - DDE for example can quite easily do this (you use it to peek the contents of an Excel grid location), but requires Excel to be running and that spreadsheet to be loaded. DDE can also be used to poke contents (write something back to a cell in a spreadsheet).
But using Oracle code to use an Excel file as a kind of database file... that IMO does not make a lot of sense. At all.

Sending column from collection on email

How can I send on email column from collection? For example I've got collection:
ID Text Email
1 Hallo
[email protected]
and by clicking on button I want to send Text column on email provided in Email column
Thanks

Yeah I know. I can't do it 100% secure. But I'm not making app for banking system so I don't really worry about that. I'm making app for a company what has few conditions.
First:
The data can't be access or modify outside the company so the best thing would be to store all app data on company server and use company network to access them. I'm thinking about wifi. So for example I would install my app on my tablet (or in future in
my phone). Connect to company network over the wifi and import the data from within the app from the network. When I would be outside the company then I would lost connection with the data.
Here is the thread for that
Second:
The exported data or backup is not readable. At least not easy to read. So if someone would steal that backup would not be able to access them. Therefor I asked for coded exported file in
this thread
I know that not all of this is possible to do it now in sienna but at least I'm trying to do the best from sienna and hopefully upgrade that app in future if some of this option will be available in next sienna releases.
If that forgotten password is not possible to send on specific email then I replace it with some kinda memorable word for now ;(

[SAP B1] Read from Matrix

I'm trying to read from a Matrix.
The code that I have until now is:
SAPbouiCOM.Matrix matrix = (SAPbouiCOM.Matrix SBO_Application.Forms.ActiveForm.Items.Item("38").Specific;
SAPbouiCOM.Column col = matrix.Columns.Item("1") ;
SAPbouiCOM.Cells cells = col.Cells;
String cell = cells.Item(2).Specific.ToString();
String f = cell.ToString();
None of the Strings (cell and f) give me the value of the cell...
I only needed a solution , don't really need the most performanced
Any Idea?
Edited by: mribeiro on May 10, 2010 7:41 PM

Try this
oItem = oForm.Items.Item("DCon")
                                oMatrix = oItem.Specific
                                oColumns = oMatrix.Columns
                                colItemPriceList = oColumns.Item("COLID11")
                                colItemPrice = oColumns.Item("COLID2")
dim a, b as string
For j As Integer = 1 To oMatrix.VisualRowCount
                                    a = oMatrix.Columns.Item("COLID1").Cells.Item(j).Specific.Value
                                    b = oMatrix.Columns.Item("COLID2").Cells.Item(j).Specific.Value
                                Next

I can't access email from my iPhone 3gs since changing email password

Hi all,
iPhone 3s 16GB
iOS version: 6.1.3
ISP Bigpond Cable
I can't access my email from my iPhone 3GS.
This is an iPhone problem, not an ISP problem.
I know this because I can access my email from both my laptop and webmail.
This is occurring here at home via my WiFi network and also a few kilometres away via 3G.
This morning I had to change the password on my Bigpond Cable internet email account.
Whenever I try to access email from my phone I receive the following error:
"Cannot Get Mail"
"The user name or password for "**** *****" is incorrect."
There are two buttons, one captioned Settings the other OK.
Both the user name and password are correct. This happened perhaps 4 or 5 times in the 6+ years I was with Internode and has happened a couple of times in the 20 months that I've been on Bigpond Cable.
I have re-entered my email account and connection details multiple times to no avail.
I have tried deleting the account, then rebooting my phone and creating a new account, but that didn't work.
I tried deleting the account, turning the phone completely off, waiting one minute and then after turning it back on, creating a new account but that didn't work.
I know I am entering the correct settings because before I deleted the account the first time, I took a series of screen captures from the Settings App and I also have the settings from MS Outlook to refer to.
Its as though somewhere in the phone, the old email password is being stored and being used instead of the new one, but I don't know where that could be except in the Settings app, "Mail, Contacts, Calendars" and that is where I am entering the new password.
The only solutions to this problem I found by searching are those that I have already tried and haven't worked for me.
Reverting to the old password is not an option. My account was compromised by Malware, hence the password change and a complete scan of my laptop.
Any ideas?

The problem was resolved by erasing the entire contents of my phone and then restoring it, setting it up as a new phone.

Accessing column from matrix

Similar Messages

Maybe you are looking for