Accessing java files for Dev't.

I would like to know how my developers can get access to some java files to facilitate the customization of the web interface, for my company.
e.g. oracle.ifs.clients.webui or
viewer.java
Thanks..

Please see the following post: http://technet.oracle.com:89/ubb/Forum36/HTML/000749.html

Similar Messages

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to Generate a Java file for a JSP Page

Hi ,
I am using weblogic11 .
I am working on a JSP page which nearly consists of 4000 lines of code.
I need to debug the file , but weblogic server is not generating the java file for the JSP pages .
Please let me know how can i genertae Java file for the jsp pages ??

JSPs are compiled into servlets automatically and those classes are stored in WEB-INF/classes folder. Servlet engine handles servlets.

What is the best method to parse a java file for function names

st="class";
while (StreamTokenizer.TT_EOF != tokenizer.nextToken ())
   if (StreamTokenizer.TT_WORD == tokenizer.ttype)
    if (tokenizer.sval.toLowerCase().equals(st.toLowerCase())){
    System.out.print (tokenizer.nextToken() + " "); //prints the class name on the console
    fileOut.print (tokenizer.sval + " "); //prints the class name to a file
}The above program searches a .java file for classes. I want to modify it so that it searches for function names as well. After several hours of figuring out various ways to do it with StreamTokenizer, I still havnt found a way. There seems to be no way to go back, i.e. no previousToken method, in StreamTokenizer.
Is it possible to do search for using StreamTokenizer, and are there easier ways of doing it?

Simple string tokenizing isn't an effective way to do this. You probably want something like ANTLR.

Need Sorter java file   for sorting the records in webdynpro java

Hi Gurus
   I had urgent requirement please give your inputs
   In my webdynpro java i need to sort entire records in table
   I now we need One sorter java class please provide that java file
   please suggest the all the steps how to do
Thanks
renu.

1. Implement class comparator wich will compare records according your sort preferencies,
like this:
     public class record_Comparator implements Comparator{
          public int compare(Object emp1, Object emp2){
      // here is your code for return -1if 'before' or 0 if equal or 1if 'after'
               int stepId_1 = ((record)emp1).get_someValue();
               int stepId_2 = ((record)emp2).get_someValue();
               if(stepId_1 > stepId_2)
                    return 1;
               else if(stepId_1 < stepId_2)
                    return -1;
               else
                    return 0;
than call method sort() with your collection of records,
like this:
Collections.sort(record_collection, new record_Comparator());

Access Java Proposals for a java source code programmatically

Hi,
Problem
Programmatically get java proposals for a java source code (not byte code) via eclipse bundle
Description
I am developing one eclipse osgi bundle to correct java source code automatically. I am running osgi bundle inside eclipse itself [Version: Mars Release (4.5.0)]. I am able to get java project object and a class object inside it which I want to correct. Every time I try to collect java code proposals as I put one test file which can be corrected (like duplicate imports), I receive below error:
Java code line
JavaCorrectionProcessor.collectCorrections(context, new IProblemLocation[] { problem }, proposals);
Error description
!ENTRY org.eclipse.jdt.ui 4 2 2015-07-27 18:57:09.196
!MESSAGE Problems occurred when invoking code from plug-in: "org.eclipse.jdt.ui".
!STACK 0
java.lang.IllegalStateException: Workbench has not been created yet.
at org.eclipse.ui.PlatformUI.getWorkbench(PlatformUI.java:93)
at org.eclipse.jdt.internal.ui.javaeditor.ASTProvider.install(ASTProvider.java:236)
at org.eclipse.jdt.internal.ui.javaeditor.ASTProvider.<init>(ASTProvider.java:227)
at org.eclipse.jdt.internal.ui.JavaPlugin.getASTProvider(JavaPlugin.java:741)
at org.eclipse.jdt.ui.SharedASTProvider.getAST(SharedASTProvider.java:128)
at org.eclipse.jdt.internal.ui.text.correction.AssistContext.getASTRoot(AssistContext.java:119)
at org.eclipse.jdt.internal.ui.text.correction.LocalCorrectionsSubProcessor.addUnusedMemberProposal(LocalCorrectionsSubProcessor.java:669)
at org.eclipse.jdt.internal.ui.text.correction.QuickFixProcessor.process(QuickFixProcessor.java:530)
at org.eclipse.jdt.internal.ui.text.correction.QuickFixProcessor.getCorrections(QuickFixProcessor.java:316)
at org.eclipse.jdt.internal.ui.text.correction.JavaCorrectionProcessor$SafeCorrectionCollector.safeRun(JavaCorrectionProcessor.java:378)
at org.eclipse.jdt.internal.ui.text.correction.JavaCorrectionProcessor$SafeCorrectionProcessorAccess.run(JavaCorrectionProcessor.java:339)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
at org.eclipse.jdt.internal.ui.text.correction.JavaCorrectionProcessor$SafeCorrectionProcessorAccess.process(JavaCorrectionProcessor.java:335)
at org.eclipse.jdt.internal.ui.text.correction.JavaCorrectionProcessor.collectCorrections(JavaCorrectionProcessor.java:468)

Any code from org.eclipse.jdt.ui (or the non-API code in org.eclipse.jdt.internal.ui) is likely to require a running workbench. Only the code from org.eclipse.jdt.core is guaranteed to work headlessly.

Can Time Capsule be used to access video files for editing? Or do I need a wired hard drive using USB/Firewire/Thunderbolt?

MORE INFO ABOUT WHAT I AM TRYING TO DO:
I'm using Final Cut Express 4 and would like to store my video clips on an external hard drive so the internal hard drive in my MacBook Pro 13 doesn't have to work so hard. I heard from a reliable source that it might be impossible to access the files wirelessley though, meaning that I might need to get a wired external hard drive that uses USB, Firewire or Thunderbolt.
Any help or suggestions would be greatly appreciated. Thanks a lot.
-Rick

The experts in the iPhoto, Aperture and iMovie support areas all strongly advise against trying to locate a "working" library on a network drive, like the Time Capsule, even if the Mac is hard wired to the Time Capsule. Things would be a lot more dangerous with a wireless connection.
Apple does as well:
“Additionally, storing the iPhoto (or other image) library on a network rather than locally on your computer can also lead to poor performance or data loss.”
http://support.apple.com/kb/TS5168
You might want to post in the Final Cut Express support area to see if the folks over there feel the same way.
Final Cut Express HD
Your best best....if you do not have the space on your Mac's hard drive.....would be to add a USB, FireWire or Thunderbolt drive directly to the Mac to establish a "local" connection. This is much better and more reliable setup that trying to use a network drive, like a Time Capsule.
Use the Time Capsule for its designed and intended purpose....your backups.....not "working" files. Time Machine on your Mac can back up both your Mac and the attached hard drive to the Time Capsule.

Can I access my files for backup before erasing and reinstalling?

I haven't been able to find a thread dealing with this specific problem, so I thought I should try my luck with a post...
On Friday, my computer crashed and I have not been able to start it again. First, I got the image of a blinking file folder with a ?, subsequent restarts have produced the normal grey screen with the apple, followed by a blue screen or by simply shutting off. Booting in Safe Mode also produces a blue screen.
Booting from the install disk (OS 10.4) allows me to open Disk Utility, but I cannot repair the disk: Invalid Node Structure. When booting from the OS 10.5 disk, I cannot perform a repair disk: the BOOTCAMP partition of the drive is normal, but the Hard Drive partition is greyed out and indicates that the drive is not mounted.
I just bought an external hard drive last week and have used Time Machine to create backups, but it looks like the backups do not actually contain files - just references to the structure of my computer. I have many files backed up, but I will lose many other files and applications if I try to erase and reinstall. Is there a way I can access those files now, so I can transfer them to the external drive before I try to erase and reinstall (or, worst case scenario, replace the HD)?

I thought I would try restoring the system through Time Machine, using my external HD. The restoration process seemed to go well (no messages or interruptions). I opened Disk Utility to check the HD. It is no longer greyed out and when checked, it comes up okay, no need for repairs. However...
I just booted up again without the Install Disk and I got a black screen this time, with large white text saying "Disk Error/ Press any key to restart".
I pressed many keys, none of which restarted the computer. I shut it down with the power button and am trying to startup again.
Yikes!

Problem in accessing class file for applet code

I am developing a package in struts frame work.
I place all the java files in action folder and jsp files in jsp folder.In one of the jsp I write code to invoke applet .But I am getting error as "class not found exception".Can any one help me? Below I am giving the code?
<embed
type="application/x-java-applet;version=1.4"
pluginspage="http://java.sun.com/products/plugin/index.html#download"
code="DigitalSignerApplet"
archive="DigitalSignerApplet.jar"
width="130"
height="25"
mayscript="true"
scriptable="true"
fileNameField="uploadFile"
certificationChainField="certChain"
signatureField="signature"
signButtonCaption="Sign selected file">
<embed>

Excuse me with out files in webserver how can I get
error, I am asking how to point to that specific classHuh? You can't. It's an HTML page with an applet. All normal rules apply.

Write a jave file for creating rules

Hello,
How can I write a java file that helps me to create rules? What all do I need
to import ? And from what do I have to extend my java class?
Thanx in advance!
Madhu.

You might look at some of the examples that do this already, either in AUR or ABS.
Some examples:
various games
j2re
flash-plugin
opera
acroread
if you run the command 'abs' as root, you can find these PKGBUILDs in subdirectories of /var/abs. Hopefully you could adapt one of those to your binary program.
Dusty

JAVA Files For BitInputStream Error

Hi there,
I wrote a little test application for a bitreader, but there always is an exception, when I execute the program, does someone know why?
import java.io.*;
class Test
     public static void main(String[] args)
          try{
          File file = new File("test.dat");
          FileOutputStream fileOUT = new FileOutputStream(file);
          BitOutputStream fileBin = new BitOutputStream(fileOUT);
          fileBin.writeBit(1);
          fileBin.writeBit(0);
          fileBin.closeStream();
          fileOUT.close();
          catch(Exception e){
               System.out.println("Fatal error using OUT");
          try{
          System.out.println("1");
          BitInputStream bitIN = new BitInputStream("test.dat");
          System.out.println("1");
          if(bitIN.readBit()){
                         System.out.println("1");
               System.out.println(1);
          else{
                         System.out.println("1");
               System.out.println(0);
          if(bitIN.readBit()){
               System.out.println(1);
          else{
               System.out.println(0);
          bitIN.close();
          catch(Exception e){
               System.out.println("Fatal error using IN");
import java.io.*;
import java.lang.Exception;
public class BitOutputStream extends ByteArrayOutputStream {
private FileOutputStream myFileOS;
private int bitsWritten;
private int bitPosition;
private byte[] myByte;
private final static int NUM_BITS_IN_BYTE = 8;
private final static int END_POSITION = -1;
* Default constructor.
public BitOutputStream() {
this(null);
* Constuct based upon a FileOutputSteam to write to
public BitOutputStream( FileOutputStream fos ) {
super();
myFileOS = fos;
bitsWritten = 0;
myByte = new byte[1];
resetByte();
* Reset the byte and position marker.
private void resetByte() {
bitPosition = NUM_BITS_IN_BYTE-1;
myByte[0] = (byte)0x00;
* Write to my super's buffer.
private void flushByte() {
write( myByte, 0, 1 );
bitsWritten = bitsWritten + 8;
resetByte();
* Write a bit to the stream.
* If bit == "0", writes a '0' bit.
* If bit == "1", writes a '1' bit.
public void writeBit( int bit ) {
if( bit != 0 && bit != 1 ) {
System.err.println( "<BitOutputStream>: only 1's and 0's can be written" );
if( bitPosition == END_POSITION ) {
flushByte();
if( bit == 0 ) {
bitPosition--;
else if( bit == 1 ) {
myByte[0] = (byte)(myByte[0] | (0x01 << bitPosition));
bitPosition--;
* Writes to the file if a FileOutputStream is set.
public void flushToFile() {
if( myFileOS == null ) {
System.err.println( "No FileOutputStream set" );
else {
try {
// Flush any excess to my super's buffer
if( bitPosition >= END_POSITION && bitPosition != NUM_BITS_IN_BYTE-1 ) {
flushByte();
// Have my super write to the File
writeTo( (OutputStream)myFileOS );
catch( Exception e ) {
System.err.println("<BitOutputStream>: error flushing to file");
e.printStackTrace();
* Close the stream.
public void closeStream() throws Exception {
try {
super.close();
catch( Exception e ) {
System.err.println("<BitOutputStream>: error while closing");
e.printStackTrace();
throw( new Exception( "<BitOutputStream>: error closing stream" ));
import java.io.*;
public class BitInputStream {
private static final int BYTESIZE = 8;
private int myUnusedBits;
private byte myCurrentByte;
private int myTotalBytesRead;
private DataInputStream myData;
// Create an input bit stream for the file
public BitInputStream (String file) throws FileNotFoundException {
     myData = new DataInputStream(new FileInputStream(file));
     myUnusedBits = 0;
     myCurrentByte = 0;
     myTotalBytesRead = 0;
public int getBytesRead( ) { return myTotalBytesRead;}
public String toString( ) { return "(Total = " + myTotalBytesRead + ", Unused bits = "
                         + myUnusedBits + ")"; }
// Close the underlying DataInputStream and release resources
public void close( ) throws IOException {
     myData.close();
     myUnusedBits = 0;
// If a partial byte has been read throw, throw it away
public void flush( ) {
     myUnusedBits = 0;
     myCurrentByte = 0;
// Read the next bit
public boolean readBit( ) throws IOException {
     // If all the bits in the current byte have been used, read another
     if (myUnusedBits <= 0) {
     myCurrentByte = myData.readByte();
     myTotalBytesRead++;
     myUnusedBits = BYTESIZE;
     boolean bitRead = (myCurrentByte < 0); // is sign bit set?
     myCurrentByte = (byte)(myCurrentByte << 1); // shift left by 1 to move next bit in
     myUnusedBits--;
     return bitRead;
public byte readByte( ) throws IOException {
     myUnusedBits = 0; // If a partial byte was read, throw it away
     byte t = myData.readByte( ); // Get the byte
     myTotalBytesRead++; // If read successful, update byte count
     return t;
public int readInt( ) throws IOException {
     myUnusedBits = 0; // If a partial byte was read, throw it away
     int t = myData.readInt( ); // Get the int
     myTotalBytesRead+=4; // If read successful, update byte count
     return t;
thx
Charly

Probably because there's an error in your program. It would be easier to say something useful if we knew what the error was and what line of code caused it.

Can't access source files for onDemand Seminar

HI I "attended" the On Demand Seminar given by Lynn Grillo -
entitled Dreaweaver for traditional graphic designers 10_23
and there was a PDF to dl - called
Getting_Your_Design_to_the_Browser.pdf and with that, you are
supposed to be able remove the file attachment "SourceFiles.zip"
Well, no matter what i try to do in preferences, Acrobat keeps
telling me i don't have the "permissions" or whatever set in the
Trust Manager - it was driving me crazy - understand please, i am
not asking for help on making Acrobat attached files open, i don't
need the headache of troubleshooting that any further, but rather,
I would be very very appreciative to anyone who can tell me where
to find those source files that i cannot open or save. She was
coughing alot and it got rushed and i want to see how something was
constructed. Much much thanks for anyone who can help me.

Meaning PP is asking for me to locat missing files, and I located them on the new drive, but I either get an error or PP locks up.
I have a very High-End PC running windows 7:
Intel i7 3.06 gHZ
12GB DDR3 RAM
2 1TB SATA HD's
Liquid Cooling on the CPU
Nvidia GTX 460 1GB Adobe hacked graphics
Tons of cooling fans
Gigabyet X58-UDR3 Rev 2.0 MB

Problem accessing variables from java file to JSP page

Hello Everyone,
I have small problem accessing my method variables from my java bean file to a JSP page. can some please take a look and tell me why I can't populate my JSP page, I've been trying all day to get this done!!!
This is my Java file
package dev;
import java.io.*;
import java.util.*;
public class RoundDetail2
public String string_gameID;
public int string_card1;
public String readDetail_topLayer;
public static final String SUITS[] = {" ", "Clubs", "Hearts", "Spades", "Diamonds", "Joker", "FaceDown"};
public static final String VALUES[] = {"Joker ","Ace", "Two", "Three", "Four", "Five", "Six", "Seven", "Eight", "Nine", "Ten", "Jack", "Queen", "King"};
public static final String SuitVALUES[] = {" ","1","2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14"};
public RoundDetail2() throws FileNotFoundException
DataInputStream inFile=
             new DataInputStream(
                new BufferedInputStream(
               new FileInputStream("C:/apps/jakarta-tomcat-4.0.6/webapps/ROOT/WEB-INF/classes/dev/Data_452SY2.txt")));
try {
             while((readDetail_topLayer = inFile.readLine()) != null)
          StringTokenizer tokenizer_topLayer = new StringTokenizer(readDetail_topLayer,"\t", true);
               while (tokenizer_topLayer.hasMoreTokens())
                    string_gameID = tokenizer_topLayer.nextToken();
     catch(IOException e)
                System.out.println(e.getMessage());
     Thanks KT

......How are you declaring the class in your JSP? ... are you instantiating it as a bean using the useBean tag, or just instantiating it in your code like normal.
Maybe you could post the relevant JSP code too?
Hello again,
Only the last string is populating after the file has be tokenized. What I'll like to accomplish is passing the very first string in the file. I did not get too far in the JSP file setup because the code is still in it's testing stage, but any help will be highly appreciated.
Here is the JSP code
<%@page import="dev.*" %>
<%@page session="true" language="java" import="java.io.*" %>
<jsp:useBean id="wagerhist" scope="request" class="dev.RoundDetail2" />
<html>
<head>
<title>Round Detail</title>
<body>
<table width="530" bordercolor="#000000" valign="top">
    <tr>
          <td align="left" width="19%">Game ID<%=wagerhist.string_gameID%></td>
          <td align="left" width="30%"> </td>
          <td align="left" width="20%">card1</td>
          <td align="left" width="31%"> </td>
        </tr>
</table>
</body>
</html>

Developing site to use external javascript files for server access. my ain.js file just displays and does not execute. Why?

My ain.js file is meant to work on and access server files for tracking all visitors to the site I am developing.
One way to access it, in my plan, is to use index.htm. when I open index.htm it displays correctly and presents a link to ain.js with a query line (?a=zzzzz--e2).
The entire file is displayed; but not executed.
Short of building my own server (prior to publishing what I am developing) how do you propose I test what I have written?
As a retiree, I have limited funds (the purpose of developing a website is meant to coorect that).

This forum is for Firefox user support, very few of our contributors are developers.
Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

How many classes should a .java file contain?

Are there any general guidelines on how many Java classes should be contained in a single .java file? I've been creating a new .java file for each class I write but see examples in Sun's Java tutorial where there are at least two classes in a single .java file. One such case is the TableDemo example at
http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/TableDemo.java
Thanks.

The example you point to isn't really more the one class in one java file. It makes use of an inner class. An inner class is something different! As far as I understand it, it is mainly used to implement some behaviour (in this case AbstractTableModel behaviour). If the MyTableModel was in a separate class file, it couldn't access the variable of the main TableDemo class. So they use an inner class.
So unless you need inner classes, this example is no reason to put more than one class in a .java file. In general, just put one class in a .java file. It's easier for everybody.

Accessing java files for Dev't.

Similar Messages

Maybe you are looking for