Accessing the Osi Soft PI Api Interface

Hi,
does anyone have any experience accessing the Osi Soft PI API Interface with LabVIEW.
I was trying to use a .dll, but had problems getting connected.The ODBC Interface isn't available. So I'm running out of ideas.
Thanks.
Solved!
Go to Solution.

Hi,
you don't need to install anything but LabVIEW or the LabVIEW runtime engine to publish shared variables via OPC.
Please refer to this link for more information.
The document mentions ServerExplorer or QuickClient as test clients for the OPC communication. Please note, that these tools are just mentioned as a method for testing the OPC communication, but you don't need to install these tools in order to make the OPC communication work with your OPC client.
Regards,
Jochen

Similar Messages

  • Public API/Interface name to import the payment information against invoice

    Hi,
    I want to get the Oracle supported Public API/Interface name to import the payment information against invoices(because there is a need to importing payment data against closed invoices from 11.5.5 to R12). Since I am not getting any standard oracle supported method, I am using the API AP_PAY_INVOICE_PKG.AP_PAY_INVOICE but while running it I am getting the following error:-
    Payment API Error =ORA-20001: APP-SQLAP-10000: ORA-28115: policy with check option violation
    occurred in
    AP_AIP_TABLE_HANDLER_PKG.Insert_Row <-AP_PAY_INVOICE_PKG.ap_pay_insert_invoice_payments<-AP_PAY_INVOICE_PKG.ap_pay_invoice<-.
    Regards,

    The below query will meet your requirement, but payment amount won't matches with some cases see below .
    1) Check Payment/EFT Payment for more than one invoice we will pay that time invoice amount is
    not equal to payment amount, Payment amount is greater than Invoice Amount.  This will be controlled in Report level.
    if you develop report using this query, there you can control this issue.
    SELECT aia.vendor_id, aps.vendor_name, aia.invoice_id, aia.invoice_num,
           aia.invoice_date, aia.invoice_currency_code, aia.payment_currency_code,
           aia.invoice_amount, aia.amount_paid, aia.payment_method_lookup_code,
           aia.payment_method_code, aia.SOURCE, aia.invoice_type_lookup_code,
           aia.voucher_num, aca.amount payment, aca.bank_account_name,
           aca.check_id, aca.check_number, aca.currency_code,
           aca.payment_method_lookup_code, aipa.accrual_posted_flag,
           aipa.cash_posted_flag, aipa.posted_flag
      FROM ap_invoices_all aia,
           ap_checks_all aca,
           ap_invoice_payments_all aipa,
           ap_suppliers aps
    WHERE aia.invoice_id = aipa.invoice_id
       AND aca.check_id = aipa.check_id
       AND aia.vendor_id = aps.vendor_id
    if it's meet your requirement pls check the Correct/Helpful Answer for your question.
    you can modify this query here and there as per your required fields.
    Thanks
    Hari

  • How to access the Requirements property (& subproperties) of steps and sequences with the TestStand API

    The concept of associating teststand objects to unit requirements for traceability purposes was added to TS 3.5, and I need to find out how to access the array of strings used to store unit requirements in step objects, sequence objects and sequencefile objects. The teststand help file points out that the requirements list of a sequencefile object is accessible using the PropertyObjectFile interface, and also points out that Requirements is a property of the sequence and step classes. Furthermore it implicitly states that the requirements property has a Links subproperty which is an array of strings, but that is pretty much the extent of the documentation on this new feature so far. There seems to be no expression function available to get to those requirements either.
    I know that this feature was added to allow TestStand to interface with RG, and I am planning on using RG, but I would also like to do things with the requirements information within TestStand.
    Anyone? 

    Are you talking about the Requirements Gateway?  It is a separate product from NI that will do what you are looking for.  I haven't used it so I am not sure of the API chain to make it work.  Take a look and see if that is what you were thinking of.
    Hope that this helps,
    Bob Young
    Sorry, I just re-read your original post and see that you are looking to also use the Requirements Gateway, so you obviously know about it.  I don't know what the API changes were that made it work so I am not going to be much help.
    Sorry about posting before getting the correct information from the original.
    Bob Young
    Message Edited by Bob Y. on 08-24-2006 04:54 PM
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • Does java api allow access the ethernet card directly

    i m working on cluster computing. i like to code in java. i need to send object from one single machine to other machines in a university computer lab. i would like to send the objects very efficiently and fastly. i used java.net and also java.nio. but i think it would be fast more if i could directly access the ethernet card- read from and write to the network interface card directly.

    does java api allow access the ethernet card directlyNo.

  • Accessing the photoshop api from flash.. within a photoshop window?

    I should maybe ask this in scripting.. but it's some ways related to the SDK. I dont want to crosspost.. if the feature exist, it's very likely that SDK developpers are aware of this (ps: i havent downloaded the sdk since the beta)
    I had the opportunity to show a bit our project to Mike Downey from Adobe at FITC/Toronto as it's related in some way to Apollo. We use realbasic for this application (flash/html/css/javascript) and we also use Realbasic, even with all the imperfections the software has, to create visual tools to call some Applescript.
    That's how i implemented the fake palette i mentionned here or in scripting forum. To me, there was a huge benefit compared to implementing a dialog with the SDK (wich doesnt support developping a palette anyway).
    What i would be really happy to see is an integration like it has been done with jsfl in flash (extensibility). Kind of a way for us to really have a common language for intranet, production tools and final release (web or cd). (leverage the skills like Adobe say to sell Apollo)
    So in extensibility in case some of you are not aware of the feature, you can create a window that has a flash content in it and there is a mecanism to call the javascript api of flash (authoring environnement). By exemple, you can have a window in flash authoring environnement that behave like other windows (ie. dockable and all)... that has a flash interface and communicated with a database.. so you can have a script that connect to a database and then create shapes in the authoring environnement... It's a very great tool for integrated production environnement..
    So, Mike Downey mentionned to me that i was present in CS3!? (when i told him that i would have been great to have Apollo/Flash being able to access the Photoshop Api) Is it true? Where is it documented? I remember seing it mentioned in the SDK survey... Or maybe it's just possible to do it via external command..so it's not integrated in a window of photoshop)?
    Sorry if it's not clear... but i would be really happy to hear more about that... It would be great to have this even if it's not Applescript compatible (i could use xml tools in the api of flash)...

    Well.. i finally have found the feature in the sample folder of javascript scripting of cs3. You really can have a flash interface to call you scripts.
    That will be a HUGE improvement for javascript scripter and i would not be surprised that it will encourage people to develop more tools.
    The big minus for me, unless it's something i havent found yet, it looks like the dialog is only available from calling the script.. so the dialog is modal... really not as cool as Flash extensibility integration, but that's a start. :(
    I repost this on Scripting forum as i now know it's related to scripting...
    I still have hope for something more advanced... the "KnowHow" thing (wich i havent tried yet) http://labs.adobe.com/technologies/knowhow/) is really a good exemple of palette/feature integration that i wish was possible in photoshop...

  • Is there any way (API ?) to access the UDS repository directly ...?

    This is probably reviving some older thread from way back in 1998 when similar questions where asked ...
    I am working on a program of my own (writing it in Borland Delphi), and I would like to have access to the Repository.
    One way I could think of is through the command line tools (like FScript) that come with UDS . However, I figure that there must e an 'easier' way to access the repository and retrieving/storing information.
    In one of the old threads I saw that an API would become available in v4 ...
    Alas ... no v4 ever saw the light. Instead of v4, the boys and girls of IPlanet/Sun went straight to v5 (and renamed their product from Forte to UDS).
    I can't find the API (documentation) mentioned above ...
    Does any of you guys out there have any information or, even better, examples on how to achieve access to the repository from a non-Forte application.
    If I could get this to work it would mean a huge (and that should be written HUGE) step forward in reaching my goal ...
    Hansz

    Of course there is an API to repository objects, and the SUN/iPlanet people are using it. Also in past times Forte-partners have used it. You can see the classes when you set certain cfg. flags. The problem is, there is no documentation about that API provided by SUN. If you find an expert within the community (who is not bound by a non disclosure ), it will be rather easy to set up C++ wrappers to integrate with an external (non TOOL) application.
    We feel a need for documented access to the repository objects as well, as that would make several tasks of development automatization and integration with other development tools (Forte for JAVA e.g.) more straight forward.

  • Windows Azure Pack - Server returned HTTP response code: 500 error while accessing the public tenant API

    Hi,
    We are facing the following error while trying to access the given Windows Azure Pack Public tenant API to query the virtual machines list along with network adaper details - 
    java.io.IOException: Server returned HTTP response code: 500 for URL: https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$expand=VirtualNetworkAdapters&$top=10000&$skip=0
    The response is proper when we access the following URL - 
    https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines
    Only on adding the $expand=VirtualNetworkAdapters, url parameter we are getting the above error.
    Where can we check for the error logs on the Azure Pack server ? We checked for the logs using Windows Event Viewer but did not find any for the public tenant API.
    What should be the cause for such an error and how can we fix this to get the proper data?
    Thanks in advance.

    Yes, we tried this, $top=10&$skip=0 works for the following url
    https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$top=10&$skip=0
    It is only when we add $expand=VirtualNetworkAdapters,
    the server returns the mentioned error response - 
    URL for which the server returns the 500 error -
    https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$expand=VirtualNetworkAdapters&$top=10&$skip=0
    Can
    you point to the error logs for Windows Azure Pack and SPF ?

  • Custom PL/SQL API that inserts the data into a custom interface table.

    We are developing a custom Web ADI integrator for importing suppliers into Oracle.
    The Web ADI interface is a custom PL/SQL API that inserts the data into a custom interface table. We have defined the content, uploader and an importer. The importer is again a custom PL/SQL API that will process the records inserted into the custom table and updates the STATUS column of the custom interface table. We want to show the status column back on the spreadsheet.
    Defined the 'Document Row' import rule and added the rows that would identify the unique record.
    Errored row import rule, we are using a SELECT * from custom_table where status<>'Success' and vendor_name=$param$.vendor_name
    The source of this parameter is import.vendor_name
    We have also defined an Error lookup.
    After the above setup is completed, we invoke the create document and click on Oracle->Upload.
    The records are getting imported, but the importer program is failing with An error has occurred while running an API import. The ERRORED_ROWS step 20003:ER_500141, parameter number 1 must contain the value BIND in attribute 1.'

    The same issue.
    Need help.
    Also checked bne.log, no additional information.
    <bne:document xmlns:bne="http://www.oracle.com/bne">
    <bne:message bne:type="DATA" bne:text="BNE_VALID_ROW_COUNT" bne:value="11" />
    <bne:message bne:type="DATA" bne:text="BNE_INVALID_ROW_COUNT" bne:value="0" />
    <bne:message bne:type="ERROR" bne:text="An error has occurred while running an API import"
    bne:cause="The ERRORED_ROWS step 20003:ER_500165, parameter number 1 must contain the value BIND in attribute 1."
    bne:action="" bne:source="BneAPIImporter" >
    <bne:context bne:collection="collection_1" />
    </bne:message><bne:message bne:type="STATUS"
    bne:text="No rows uploaded" bne:value="" >
    <bne:context bne:collection="collection_1" /></bne:message>
    <bne:message bne:type="STATUS" bne:text="0 rows were invalid" bne:value="" >
    <bne:context bne:collection="collection_1" /></bne:message></bne:document>

  • Access the Parameters of a SequenceCall via API

    I would like to access several characteristics, like name and value, of the parameter(s) of a SequenceCall via the TestStand API,
    but it didn't work.
    First I get the object reference of the Class SequenceCallParameters via Class SequenceCallModule.Parameters. Now I
    can determine the correct number of parameters via SequenceCallParameters.Count. Cause that works, I think I am on
    the right way. To access the property object of a specific parameter, I get the object reference via SequenceCallParameter.Item and
    the Method AsPropertyObject of the Class SequenceCallParameter.
    I thougth with this reference I could access the properties of the parameter via the PropertyObjectClass, but I didn't get the correct information resp. I didn't know at which property the objectReference really points to.
    I add an example sequence. I would get the information from the Sequencecall via the PreStepCallback.
    I hope someone has an idea. Thank you in advance.
    Regards Carsten
    Attachments:
    Example GetParameters from SequenceCall.seq ‏64 KB

    CKone,
    You can use the API to access the parameter properties.
    Once you get the parameter item you can treat that object as a SequenceCallParamer object.
    The SequenceCallParameter object contains several of the properties you were  trying to access:
    SequenceCallParameter
    Use objects from the SequenceCallParameter class to configure and obtain SequenceCallParameter-specific information for an item in the SequenceCallParameters collection class.
    Properties
    Name (Read Only)
    PassByReference (Read Only)
    Type (Read Only)
    UseDefaultValue
    UserData (Read Only)
    ValidEvaluationTypes (Read Only)
    ValueExpr
    I modified your sequence file to use this object.
    Hope it helps.
    Antonio Lie
    Attachments:
    Example GetParameters from SequenceCall35.seq ‏65 KB

  • How to access the "Non Adapter" properties in Teststand API

    Hi,
    I'm trying to dynamically create a sequence file through Labview with the help of the API. So far I have eben able to create the file, add a sequence call into the file as well as link the sequence call to a particular sequence file that will be called. Now, I wish to add certain "non-adapter" steps into the sequence file like Goto, Label, Property Loader etc. I can't seem to find a way to access the propeties once the step has been added. In the LV adapter, I was able to access the TSAdp.SequenceCall API and manipulate the properties. How do I do the same for the non-adapter ones?
    Also, when I load the sequence file through the TSAdp.SequenceCall API, i'm unable to access the parameters and link the inputs and outputs. I've attached a portion of my code and would really appreciate some help.
    Thanks in advance,
    -Anshul
    Attachments:
    Dynamic Sequence File.vi ‏127 KB

    Thanks for everyone's replies. I am now able to set the parameters for the sequence file, just that I added a property node for the sequence file path and the sequence before loading the parameters. That did the trick and the rest was easy. Also for Goto, with some digging, I was able to add a custom property step if it fails or passes the step. It works like a charm. I'm attaching a modified version of my code in LV 7.0 format.
    Attachments:
    Dynamic Sequence File-1.vi ‏175 KB

  • Conditional Mapping with script using BlOCKPROC to access the HFM API

    Hello,
    following problem. During the mapping/validation I need to map certain custom1 members to None if the Top Member is None and let it be if not None. This allocation depends on the account. Reading through the documentation I stumbled across conditional mapping.
    So in the Custom1 map type Like I defined following:
    Rule Name: C1_Script
    Rule Definition: CXXX*
    TargetCustom1: #Script
    In the script I try to achieve to get the Custom1 Top member for the account! The HFM API offers this function(fGetCustomTopMember) and with varValue(14) I get my TargetAccount. So everything I need seems to be there.
    Only problem is I need to use the BlOCKPROC to access the HFM API provided through the adapter, but either way won't work.
    Trying "Set API.IntBlockMgr.IntegrationMgr.PobjIntegrate = BlOCKPROC.ActConnect("LookUP")" throws an object required error.
    Trying
    Dim BLOCKPROC
    Set BLOCKPROC = CreateObject("upsWBlockProcessorDM.clsBlockProcessor")
    BLOCKPROC.Initialize API, SCRIPTENG
    throws me a type mismatch for "BLOCKPROC.Initialize".
    I am kinda at my wits end. Any help/clue is much appreciated.
    Ahh, yes the different writing BlOCKPROC and BLOCKPROC is correct!
    Thanks!

    Hello Tony,
    Many thanks for your answer. Just one last question. The event AftProcMap(strLoc, strDim) gives me the Dimension? Just how do I get the account?
    Can you point me to the right direction and I'll figure out the rest!
    Thanks a lot!

  • How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

    How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

    Hi,
    Thanks for the suggestion. I've been playing around with some of the classes of the java.net package and java.io
    Using the URL class i can get the content of the data from a STATIC page and output that response to file so that is does not display to the client broswer.
    But this only works if the URL i give points to a static html page.
    So the problem i'm getting is if i'm righting in arguments in the URL, this means that server needs to process the arguments i give and its sends back a dynamic result. Because its dynamic the URL class can not handle this and throws me an exception everytime :(
    Have u ever tried to do some things like this?
    Rahul

  • Error in the module RSQL accessing the database interface

    I have written the following query.
    SELECT  a~no
             a~hist_no
             a~chk_stat
             a~chk_date
             a~user as chk_user
             b~name as chk_by
             into corresponding fields of table hist
             from zhist as a INNER JOIN zuser as b on
             auser = bbname
             where pspnr = v_pspnr
             and   chk_no = v_chk_no.
    I am getting the dump "Error in the module RSQL accessing the database interface".
    Please provide me the solution.
    Thanx,
    Selva.

    Hi,
    As i have analysed your query in that you are putting the data in the internal table 'hist' which is also a standard structure and if you check in SE11 'hist' is the standard structure for 'Tablespace History' and might be because of that it is causing the problem.
    Kindly check by changing the name of the internal table to tt_hist and then try.
    I think that will solve the problem.
    Regards,
    Harsh Goel

  • How to access the SAP MDM destinations using mdm java api in 7.1

    hi,
    I have SAP MDM 7.1 SP11 and SAP Portal 7.3 and developing the custom webdynpro application using the  JAVA MDM API. I want configure the SAP MDM destinations in SAP Portal .
    How to access the MDM destinations in java code using API? and how to create the connection with MDM using the MDM destinations.
    Please provide the code for access the SAP MDM destinations in java code using MDM java api and creating the connection to MDM.
    Thanks

    Jun,
    Thanks for the reply and api information.
    I have got this api information from the following sap documentation. But i am looking for the code by implementing this class and creating the mdm connection.
    Creating an MDM Connection Using Java Code - SAP NetWeaver Master Data Management (MDM) - SAP Library
    if any thing can you share it.
    Thanks

  • Is it possible to access the http web interface over the fa1 management interface?

    Hello All,
        I am remotely connected into a Cat 4500 + Supervisor V module via console cable and point to point connection from laptop to fa1 management interface on SupV.  SupV module is running IOS 15.0(2)SG8.
        I am not able to physically change the patch cable from fa1 management interface to gi2/3 or any other switch port for a couple days and would like to see if it is possible to access the http server through this fa1 port since I am working remotely.  I can ping the laptop from fa1 and tftp ok but cannot access the http/https server.  Is this even possible without connecting the laptop into a regular switch port like gi 2/3 gi 2/4 etc..?  The reason I ask is I would like to use Cisco Networking Assistant gui for some things but need access to https server first over the fa1 link.
    Any suggestions would be much appreciated.
    Thanks!
    -S

    Here is the ACL list.  I have not made any entries into this list and all of these are default at this time.  Do I need to make an explicit allow ACL for http?
    Thanks!
    -S
    #show access-list
    Extended IP access list system-cpp-all-routers-on-subnet
        10 permit ip any host 224.0.0.2
    Extended IP access list system-cpp-all-systems-on-subnet
        10 permit ip any host 224.0.0.1
    Extended IP access list system-cpp-dhcp-cs
        10 permit udp any eq bootpc any eq bootps
    Extended IP access list system-cpp-dhcp-sc
        10 permit udp any eq bootps any eq bootpc
    Extended IP access list system-cpp-dhcp-ss
        10 permit udp any eq bootps any eq bootps
    Extended IP access list system-cpp-energywise-disc
        10 permit udp any eq any eq 0
    Extended IP access list system-cpp-hsrpv2
        10 permit udp any host 224.0.0.102
    Extended IP access list system-cpp-igmp
        10 permit igmp any 224.0.0.0 31.255.255.255
    Extended IP access list system-cpp-ip-mcast-linklocal
        10 permit ip any 224.0.0.0 0.0.0.255
    Extended IP access list system-cpp-ospf
        10 permit ospf any 224.0.0.0 0.0.0.255
    Extended IP access list system-cpp-pim
        10 permit pim any 224.0.0.0 0.0.0.255
    Extended IP access list system-cpp-ripv2
        10 permit ip any host 224.0.0.9
    Extended MAC access list system-cpp-bpdu-range
        permit any 0180.c200.0000 0000.0000.000c
    Extended MAC access list system-cpp-cdp
        permit any host 0100.0ccc.cccc
    Extended MAC access list system-cpp-cgmp
        permit any host 0100.0cdd.dddd
    Extended MAC access list system-cpp-dot1x
        permit any host 0180.c200.0003
    Extended MAC access list system-cpp-lldp
        permit any host 0180.c200.000e
    Extended MAC access list system-cpp-mcast-cfm
        permit any 0180.c200.0030 0000.0000.000f
    Extended MAC access list system-cpp-pppoe-disc
        permit any any protocol-family pppoe-disc
    Extended MAC access list system-cpp-sstp
        permit any host 0100.0ccc.cccd
    Extended MAC access list system-cpp-ucast-cfm
        permit any host 000d.6558.d5fd

Maybe you are looking for