Accessing the webservice hosted by BPEL(oracle 10G) from the weblogic 9.0

Hi ,
I have to access the funtion hosted in the webservice through BPEL system.Am using the weblogic 9.2
i have written a build .xml to create the client jar from the WSDL.
<project name="webservices-fusion_client" default="all">
     
     <taskdef name="clientgen" classname="weblogic.wsee.tools.anttasks.ClientGenTask"/>
     <target name="clean">
          <delete dir="${clientclass-dir}"/>
     </target>
     <target name="all" depends="clean,build-client"/>
     <target name="build-client">
          <clientgen wsdl="http://server:20202/wsdl/?WSDL/L2COrder?WSDL" destfile="fusionclient.jar" packageName="lab.webservices.fusionclient" serviceName="L2COrder"/>
     </target>
</project>
while running the build .xml using "ant" command am getting this error.
[clientgen] weblogic.wsee.tools.WsBuildException: Failed to parse WSDL
[clientgen] at weblogic.wsee.tools.clientgen.ClientGenUtil.getJsCallbackServ
iceName(ClientGenUtil.java:328)
[clientgen] at weblogic.wsee.tools.clientgen.ClientGenUtil.createBuildtimeBi
ndings(ClientGenUtil.java:184)
[clientgen] at weblogic.wsee.tools.clientgen.ClientGenUtil.setupBuildtimeBin
dingsFromScratch(ClientGenUtil.java:244)
[clientgen] at weblogic.wsee.tools.clientgen.ClientGenUtil.setupService(Clie
ntGenUtil.java:78)
[clientgen] at weblogic.wsee.tools.clientgen.ClientGenImpl.doClientGen(Clien
tGenImpl.java:186)
[clientgen] at weblogic.wsee.tools.clientgen.ClientGenImpl.execute(ClientGen
Impl.java:147)
[clientgen] at weblogic.wsee.tools.anttasks.JwscClientGen.execute(JwscClient
Gen.java:191)
[clientgen] at weblogic.wsee.tools.anttasks.ClientGenTask.doClientGen(Client
GenTask.java:198)
[clientgen] at weblogic.wsee.tools.anttasks.ClientGenTask.execute(ClientGenT
ask.java:172)
[clientgen] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.ja
va:275)
[clientgen] at org.apache.tools.ant.Task.perform(Task.java:364)
[clientgen] at org.apache.tools.ant.Target.execute(Target.java:341)
[clientgen] at org.apache.tools.ant.Target.performTasks(Target.java:369)
[clientgen] at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
[clientgen] at org.apache.tools.ant.Project.executeTargets(Project.java:1062
[clientgen] at org.apache.tools.ant.Main.runBuild(Main.java:673)
[clientgen] at org.apache.tools.ant.Main.startAnt(Main.java:188)
[clientgen] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:196)
[clientgen] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:55)
[clientgen] Caused by: weblogic.wsee.wsdl.WsdlException: role name Callback is n
ot found.
[clientgen] at weblogic.wsee.callback.wsdl.WsdlPartnerLinkType.getPortTypeNa
me(WsdlPartnerLinkType.java:76)
[clientgen] at weblogic.wsee.tools.clientgen.ClientGenUtil.getJsCallbackServ
iceName(ClientGenUtil.java:323)
[clientgen] ... 18 more
BUILD FAILED
D:\buil-jar\build.xml:17: weblogic.wsee.tools.WsBuildException: Failed to parse
WSDL
i have a tag named "partnerLinkType" which contains the roll name tag in WSDL file. i guess the probelm is coming here .
<plnk:partnerLinkType name="L2C_Provisioning_Access">
          <plnk:role name="L2C_Provisioning_AccessRequester">
               <plnk:portType name="tns:L2C_Provisioning_AccessCallback"/>
          </plnk:role>
          <plnk:role name="L2C_Provisioning_AccessProvider">
               <plnk:portType name="tns:L2C_Provisioning_Access"/>
          </plnk:role>
     </plnk:partnerLinkType>
can you please provide some solution here.
Thanks in advance

Please let me know if you want to see my WSDL file i will send it to you.

Similar Messages

Complexities of Migrating Oracle 10g from Solaris to HP-UX Itanium

Can anyone share their experiences with regards to migrating Oracle 10g from Solaris on a Sun platform to HP-UX 11i v3 (Itanium) on HP Integrity servers. We are trying to consider all the risks associated with such a move. How much time delay did you experience in resolving unexpected issues along the way? How complex is the process? If you had to do it all over again, would you?
In addtion, we will also be migrating Oracle eBusiness Suite 11i (11.5.10.2).
We appreciate your helpful feedback.
Thank you.

Here is more information:
- the database size is currently about 500GB
- our ASP allows us to be down as much as we want however the company's own needs can only allow a downtime window of two days (over the weekend)
- i presume further that RMAN might be an option to use to backup the database and instance to some transportable media
- it would take about four days to get that media from the ASP to our facility so durign that time the instance at the ASP would have to be used
- after we get the backup media and load everything into our in-house site, our last step would be to find a way to migrate all changes over the WAN. I am told that unless the platforms are the same on both ends, mirroring will be extremely difficult or impossible. If we have a platform that is different from the ASP platform, then the migration of all changes will require conversion and other mechanisms. I am told that HP-UX has so much complexities that this will be a daunting task to accomplish.
Do you have any opinions and recommnedations?

Question on migrating oracle 10g from solaries to linux?

Can some one tell the exactly what is the advantage of migrating oracle 10g from solaries to linux?
Thank you,
hb

call me
[email protected]

Uninstall oracle 10g from Linux Red hat

is any body know the standard procedure to uninstall oracle 10g from linux red hat.

The correct answer is "Undo the changes you made during the install"
By this I mean:
Stop all of the processes
Delete the ORACLE_BASE directory (usually the one one level up from ORACLE_HOME)
Delete the oraInventory directory if it isn't inside ORACLE_BASE
Delete /etc/oratab, /etc/oraInst.loc
Delete /user/local/bin/coraenv, /user/local/bin/oraenv, /user/local/bin/dbhome
Undo any environment settings you may have modified (in .bash_profile and bashrc)
That should be just about it. That's how I usually clean out my system between installs.
~Jer

Can T3Client access the WebLogic Server Workspace.

Hi,
a couple of questions ....
Can the T3Client access the Weblogic Server Workspace ???
If so,how ???
The reason for this that I want to get access to the Weblogic Server Cache.
Is there any other way of getting access to the WebLogic Server Cache ???
Kindly let me know if you find the answer.
Thanks & regards,
Karan.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
-Griff W.

Provide developer a username and password to access the weblogic

Hi,
we have a weblogic server with a domain name soa_domain and a managed server instance name soa_server1.
we have 5 developer working. Our aim is to give each developer a username and password to access the weblogic for developing and deploying the applications so that they will not be able to access or tamper other developers work.
how to accomplish this in weblogic 11g
Thanks in Advance
user3560574

GO to Security Realms > myrealm > Users n Groups > Create a new user (say 'developer') > Click on 'developer' user > Click on Groups > Make it a member of the groups you want your developer to be depending on what kind of previledges you want to give them.
-Faisal
http://www.weblogic-wonders.com

Free web hosting for PHP Oracle 10g XE applications

Hi guys
I am a student currently completing my final year project of a BSc Information Systems / Computer Science programme. I am using PHP and Oracle 10g XE and I was hoping that someone could advise me on a good web hosting site for student applications that is available at no cost, since I can't afford to pay for hosting. It is important that I host my site because my university tutor (in the UK) needs to access my site and provide feedback at this point in the project. Any assistance will be very much appreciated.

Just to let everyone know, i will do free hosting for students needing it for there projects, i will need an academic email address for corespodence, so thats a .edu or .ac.uk for example.
I have just relaunched the website and slashed my prices, so starter packages are from 2.99 a month for oracle and php. www.phporaclehosting.com
Any questions reply to this thread

Changing HOST Name in Oracle 10G AS

Hi,
I am using "Oracle 10g Application Server". I have installed oracle 10G AS in Windows 2003 Server(32-bit) ,2G RAM
Machine is UTI ...Every Thing is Working Fine ..... After the Successful Installation of 10G AS Suddenly i got requirement to the Change host (UTI to UTTI)
so i have changed the host Name to UTTI after that Oracle 10G AS is not Working , i know that every thing is registered with host name as UTI
is it any possible Solution to make it Working Fine
Any Advice on this .
Thanks for Your Valuable Information
SHAN

user609980 wrote:
I am using "Oracle 10g Application Server". I have installed oracle 10G AS in Windows 2003 Server(32-bit) ,2G RAM Good question. One that is appropriate for the App Server forums, not the Database forums.
And answered in the docs.
Which docs? Well, that depends on the VERSION of the app server. Not the BRAND as you specified. (Assuming 10g R2, 10.1.2.x, you would look under App Server 10g R2 docs at http://tahiti.oracle.com, click on the System Management tab, and look at Chapter 8 of the "Oracle Application Server >> Administrator's Guide"

How to connect Oracle 10g from OBIEE on Linux?

- OBIEE 10.1.3.4.0 is running on Cent 5 Linux M1 (*64* bit). My Oracle database is running another similar machine M2.
- I installed oracle 64 bit client on M1 but could not connect to run the report, connection issue. Even nqcmd didn't helped.
- I guess it was because OBIEE is *32* bit application and hence need 32 bit client.
- I tried installing Oracle 32 bit Linux client on M1 but installation fails with some dependency (Not sure if we can install 32 bit client on 64 bit machine)
Q1 - Any suggestion at this point?
Q2 - Is there any way we could connect OBIEE to Oracle via ODBC drivers. I could not found any odbc driver/so file when I wan installed 64 bit client. Any suggestion for this?
Thanks in Advance!

The computer running XE server does not need a client installed.
If you are trying to connect from another computer, install the XE client and create file C:\XEClient\NETWORK\ADMIN\TNSNAMES.ORA with the following contents (replace ip_address as appropriate):
XE =
    (DESCRIPTION =
       (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = ip_address)(PORT = 1521))
       (CONNECT_DATA =
          (SERVICE_NAME = XE)
{code}Test with
{code:java}
sqlplus SYSTEM/password@XE
{code}
Regards,
Georger
wrote:user_7000018
Hi ,
i am using oracle 10g express edition. i installed oracle 10 xe server it is working fine but how can i connect oracle 10g xe client to this server becouse there is no net configuaration nad Migration tools and also net configuation Assistant . can you explain
Regards,
Dharmendra

ORA-03106 Error when connecting to Oracle 10g from Forms 6i

I have migrated my database from Oracle 8.0.5 to Oracle 10g, version 10.0.1.0.3 through import-export utility. During migration, one difference I made was to change the NLS_LANG to UTF8 from ANSI.
The NLS_LANG for client is AMERICAN_AMERICA.WE81S08859P1.
I am using HP ML370 Proliant Server and running Red Hat Enterprise Linux AS version 3 with Oracle 10g
My client-server application is based on Oracle Developer version 2.1. I am using forms 5.0 and reports 3.0 only.
The problem with me is that the client-server application is working against the upgraded database, but with greatly downgraded speed. The .fmb files cannot be compiled, however some of the .rdf files are compiled successfully, but remaining not.
My question is that is Developer 2000 (Forms 5.0.6 and Reports 3.0.5) compatable with Oracle 10 database, as my application is running very slow ?
I tried Forms 6i to remove this problem. I used Forms Developer 6i Recut version and successfully installed on Windows XP, however, when try to create connection using Net 8 Easy Utility, the connection does not establish with following error:
ORA-03106 : fatal two-task communication protocol error
The entry has been checked in tnsnames.ora and is found correct. I also tried connecting through SQL, but the application closes.
The patch set 17 for installation on Windows XP has also been applied, but still the same error persits.
The same installation has also been checked on Windows 2000, but the same problem persists.
I would be thankful if any one provide me solution for the same. Where I am mistaken and what do I do to get out of this problem.
Regards
Naveen.

Naveen,
Forms 5.0 is not certified and not tested with Oracle DB 10g because it was desupported before 10g got released.
The other problem is hard to give a generic answer for and I suggest to address this to metalink.oracle.com
Frank

Problem in importing data in oracle 10g from 9i backup

Hi ,
Am trying to import data in oracle 10g..but it does not importing constraints, and stop doing anything by the msg.
About to enable constraints.....
after this msg it does not work.
plz help,
Regards,
Neha

Hi Neha,
You have a lot of options. I'll supose you can test first, and you're using an export file.
First forget about the data, think in your database structure. So you can do this:
exp userid=... file=exp_norows.dmp full=y rows=n statistics=none
Now you have the structure of your database. Create the database, in 10g, empty, check you have all filesystem, etc. for you new datafiles. And do the import with parameter ignore=y, you'll see a lot off errors on SYSTEM schema, don't worry about it.
Now you have the structure of you database in 10g. You can take a look in the import log file, looking for some possible errors come from your schemas. so check the objects, and check the schemas.
Bear in mind things like CONNECT role in 9i it's different in 10g, you can't create db_links in 10g with "IDENTIFIED BY VALUES" because you'll get an ORA-00600, etc.
Well, fix all problems on source database (9i) and repeate this procedure until you don't recieve any more errors (not a SYSTEM schema errors).
When you have everything solved, you can try to import the data.
I hope, this method can help you. If you have any problem do not hesitate to ask me.
John Ospino Rivas

OS/DB Migration to Windows X64 bit /Oracle 10G from OS400/DB4 V5R4

Hi,
We need to do the OS/ DB migration in BI servers .. Kindly guide me .. what are the prerequesties ?
I think we can achieve this throught Heterogeneous system copy .
Source system    Target system
NW2004 -BI 7.0   NW2004 -BI 7.0
DB4 V5R4           Oracle 10G
OS400               Win2003 x64
SAP kernel 700    SAP Kernel 700
Thanks in advance ..
gnanaprakasam

Hi
You need perform a heterogeneus system copy with sapinst
Chose the sap system->Software Life-Cycle options->system copy->database
And perform in tree steps
export preparation
table splitting preparation
database istance export
It create a export database, and with the sapinst you import in Target system
More info
http://service.sap.com/instguides
Heterogeneous system copy
Regards
William Neira

I want to uninstall Oracle 10g from Solaris 10

Hai All,
I want to uninstall Oracle 10g safely from Solaris 10 . I take runinstaller and execute. In the next screen installed products tab appear . I select the oracle products and compnents there but the Remove button not active . I tried many time.. But it is not possible....Please help..
Shiju

After your run 'runInstaller', on the first 'Welcome' Screen,
there's a "Deinstall Products" button on bottom right hand corner, click that and follow the screen.

Accessing the weblogic-ejb-jar.xml transaction-descriptor

Is there a way to programmatically access the transaction-descriptor (in the weblogic-ejb-jar.xml file) for a given application?

We would like to get the transaction-timeout-seconds for AquaLogic DataServicesPlatform. We have a user timeout function in XQuery that can switch to another path after a user prescribed number of seconds. We set a timer and recognize the timeout, but we may have started a JDBC connection already and issued a query that may run and run and run .... We would like to limit the query to run a maximum length of time.
If I can get the EJB Session timeout (actually the transaction-timeout-seconds or so I'm told) I can set the JDBC connection timeout value before issuing our query.
[email protected]

Oracle DLL Error using AQ (in Oracle 10g) from Visual Basic

Hi, everybody
I have a Visual Basic 6 (with SP 6) application which connect to Oracle through an ODBC connection. Not only the client but also the server use Oracle 10.2.0.3.
The application accesses to Oracle Queues by using OraAQ, OraDatabase, OraSession... objects.
Everything works all right until the moment of closing the application; when the OraAQ object is disposed, an error in a DLL occurs. The DLL is orageneric10.dll, and it causes a Windows error which closes the application. Windows XP is used as operating system.
The error only happens with the OraAQ object; other objects are disposed without any problem.
Please, if somebody have an explanation, let me know. It is a very important issue for us.
Thanks in advance

Has anyone discovered an answer to this yet? I get the same issue, but am struggling to find a solution anywhere.
(VB.NET on Visual Studio 2005, Flash CS5, Flash Player 10.1.85.3, AS3)

Accessing the webservice hosted by BPEL(oracle 10G) from the weblogic 9.0

Similar Messages

Maybe you are looking for