ORA-03106 Error when connecting to Oracle 10g from Forms 6i

I have migrated my database from Oracle 8.0.5 to Oracle 10g, version 10.0.1.0.3 through import-export utility. During migration, one difference I made was to change the NLS_LANG to UTF8 from ANSI.
The NLS_LANG for client is AMERICAN_AMERICA.WE81S08859P1.
I am using HP ML370 Proliant Server and running Red Hat Enterprise Linux AS version 3 with Oracle 10g
My client-server application is based on Oracle Developer version 2.1. I am using forms 5.0 and reports 3.0 only.
The problem with me is that the client-server application is working against the upgraded database, but with greatly downgraded speed. The .fmb files cannot be compiled, however some of the .rdf files are compiled successfully, but remaining not.
My question is that is Developer 2000 (Forms 5.0.6 and Reports 3.0.5) compatable with Oracle 10 database, as my application is running very slow ?
I tried Forms 6i to remove this problem. I used Forms Developer 6i Recut version and successfully installed on Windows XP, however, when try to create connection using Net 8 Easy Utility, the connection does not establish with following error:
ORA-03106 : fatal two-task communication protocol error
The entry has been checked in tnsnames.ora and is found correct. I also tried connecting through SQL, but the application closes.
The patch set 17 for installation on Windows XP has also been applied, but still the same error persits.
The same installation has also been checked on Windows 2000, but the same problem persists.
I would be thankful if any one provide me solution for the same. Where I am mistaken and what do I do to get out of this problem.
Regards
Naveen.

Naveen,
Forms 5.0 is not certified and not tested with Oracle DB 10g because it was desupported before 10g got released.
The other problem is hard to give a generic answer for and I suggest to address this to metalink.oracle.com
Frank

Similar Messages

Ora-12203 error when connecting to oracle 9i on win2003 - urgent help reqd

hi
one of our clients who is on same N3 network and is trying to log on to our oracle 9i database which is installed on windows 2003 + srv pack 1 but is getting ora-12203 erorr.
the ip address of the client machine has been allowed thr our firewalls and been allowed to use sqlnet on oracle port 1521
following setting have also been done
in registry HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME(0) i have set
USED_SHARED_SOCKET=TRUE
using Net manager, i have set connection type as DEDICATED_SERVER.
protocol as TCP/IP and Port no =1521.
At O/S level we have given oracle_home for 9i access (read, modify execute ..etc) to all sub-folders under e:\orant\ora9i
i have restarted the listener service and also the windows 2003 server.
Is there any specific setup criteria which we need to cater when users connect to windows 2003 server
thanks
kedar

Hi Paul
we have 2 external machine which have been given access thr our firewalls
our database is in Wales and the machines are in england.
everything is ok on the server as i have checked the settings which i could know of
All these machines are on same N3 network , the 2 client machines have DNSlookup set which goes thr all the necessary firewalls and when the following command is run on client machine it can see the server
c:\> nslookup < machine_name >
the access to our database is given thr range of ip address as we dont have static IP and when the above command is run it returns dynamic IP address for the database in Wales
H:\>nslookup krusty.hsw.wales.nhs.uk
Server: bwd-dc1.bwd.xelpct.nhs.uk
Address: 10.xxx.xx.xx
Non-authoritative answer:
Name: krusty.hsw.wales.nhs.uk
Address: 194.xxxx.x.xx <---- ip address of databse
Thanks
Kedar

ORA-12504 error when connecting to Oracle 11G DB using OCI and instantclient-basic-nt-11.2.0.3.0.zip

Dear Friends,
I am using OCI and instant_client (11.2.0.3.0) in my C++ program (on Windows 7) to connect remotely to 11G database.
While doing a connection using server name as well as servername:port/service_name as connection strings, I am getting error of ORA-12504 TNS:listener was not given the SERVICE_NAME in CONNECT_DATA.
According to instant client FAQ & white paper at http://www.oracle.com/technetwork/database/features/instant-client/index.html, no tnsnames.ora is required for instant client. Then why could I be getting this error?
I ensured that only the instant client directory is in Path environment variable. There was a ODBC driver installed on this same host. Could that be modifying the behavior of instant client?
Kindly guide.
Many thanks in advance for your help and time.
Best Regards,
- ganesh

>>what is the exact connect string you are using?
For connection, I am using the plain hostname on which the DB server is running.
>>are you calling OCIServerAttach before OCISessionBegin?
I am not using OCISessionBegin. For connecting to DB server, I am using the following sequence of OCI calls (in this same order):
1) g_OCIEnvNlsCreate
2) g_OCIHandleAlloc //-- error handle: OCI_HTYPE_ERROR
3) g_OCIHandleAlloc // --- sevice context: OCI_HTYPE_SVCCTX
4) Setting driver name and application name for the session:
    OCISession* usersession = 0;
    ret = g_OCIAttrGet(m_pSvcCtx, OCI_HTYPE_SVCCTX, &usersession, NULL,
                             OCI_ATTR_SESSION, m_pErrHdl);
    if (ret == OCI_SUCCESS)
        ret = g_OCIAttrSet(usersession, OCI_HTYPE_SESSION, (void*)"OCI_DRV", 2,OCI_ATTR_DRIVER_NAME, m_pErrHdl);
        ret = g_OCIAttrSet(usersession, OCI_HTYPE_SESSION, (void*)"ClientApplication", <ub4>(strlen("DataReconScanning")), OCI_ATTR_CLIENT_IDENTIFIER, m_pErrHdl);
5) g_OCILogon() using the user, password and host name, as below:
g_OCILogon(m_pDbCon, m_pErrHdl, &m_pSvcCtx,
                               (text*)user.c_str(), static_cast<ub4>(user.length()),
                               (text*)pass.c_str(), static_cast<ub4>(pass.length()),
                               (text*)host.c_str(), static_cast<ub4>(host.length()));
Thanks.

ORA-00922 error when user calls sys.verify_function from forms

Hi there,
I have a form to change the user's current password.
After user provides new password and clicks on OK button, it calls a database procedure called "change_pwd" which calls the Alter command.
I modified the SYS.verify_function, which has the code
-- rule Passwords can only contain A-Z, 0-9, _
   violate_rule_five := FALSE;
   FOR v_char IN 1 .. lv_pwd_len
   LOOP
      v_this_char := UPPER (SUBSTR (PASSWORD, v_char, 1));
      IF (   ((v_this_char >= 'A') AND (v_this_char <= 'Z'))
          OR ((v_this_char >= '0') AND (v_this_char <= '9'))
          OR (v_this_char = '_')
      THEN
         violate_rule_five := FALSE;
      ELSE
         violate_rule_five := TRUE;
         GOTO violrule5;
      END IF;
   END LOOP;
   <<violrule5>>
   IF violate_rule_five = TRUE
   THEN
            raise_application_error (-20600, lv_error_msg);
   END IF;When i try to change the password to 'blah-blah1' i expect it to show be error 20600. But instead shows ORA-00922.
Why is this happening?
All other rules in the verify_function are working correctly.
Please help.
I added the [ code ] tags to make the code easier to read.
Message was edited by:
Jan Carlin

I have noticed just now that a dump file having a name like ifrun60_dump_299, is generated by FORMS every time I issue the aborted call to the foreign function.
Inside the form dump file, apart from useless info like Registers and so on, the message:
"Could not find Module32First"
By a FILE/FIND/CONTAINING TEXT I searched all the DLLs, and I noticed that Module32First is a routine that can be found within each of the following DLLs:
Cl32
d2kwut32
d2kwut60
I tried to load those DLLs along with SECURSIGN.DLL by modifying the PROCEDURE LoadLibrary into the FFI-generated PLL code, and I have apparently no problem in loading all the DLLs that I wish, but the error persists, and that dump file is constantly generated, always looking for the "Module32First" routine.
How can I avoid all that mess and the FRM-40734 error??

Error while connecting to oracle 10g data base

Following is the code we used to connect to oracle 10g data base using symbian 7.1 series 80 SDK
int CTest_S80AppUi::SetupODBC(void)
RETCODE rc;
char *DataSource = OD_DATA_SOURCE;
char UserId = "system", Password = "manager";
rc=SQLAllocEnv(&Henv);
//if (TEST_CHECK_ERR(SQL_NULL_HSTMT, rc, "SQLAllocEnv", FALSE) < 0) return(-1);
rc=SQLAllocConnect(Henv, &Hdbc);
//if (TEST_CHECK_ERR(SQL_NULL_HSTMT, rc, "SQLAllocConnect", FALSE) < 0)
     //return(-1);
rc = SQLConnect(Hdbc, (unsigned char *)DataSource, SQL_NTS,
          (unsigned char *)UserId, SQL_NTS,
          (unsigned char *)Password, SQL_NTS);
bConnected = TRUE;
//if (TEST_CHECK_ERR(SQL_NULL_HSTMT, rc, "SQLConnect", FALSE) < 0) return(-1);
SQLAllocStmt(Hdbc, &Hstmt);
//if (TEST_CHECK_ERR(SQL_NULL_HSTMT, rc, "SQLAllocStmt", FALSE) < 0) return(-1);
return (1);
} /* SetupODBC */
iam getting the return code for SQLConnect as -1.
Thanks in advance.

Thanks for the reply.
//syntax means comments.
chk the following code.
int SetupODBC(void)
char *DataSource = "polite";
char UserId = "system", Password = "manager";
if ( SQLAllocEnv(&Henv) < 0 )
return -1;
if ( SQLAllocConnect(Henv, &Hdbc) < 0 )
return -1;
if ( SQLConnect(Hdbc, (unsigned char *)DataSource, SQL_NTS,
(unsigned char *)UserId, SQL_NTS,
(unsigned char *)Password, SQL_NTS) < 0 )
return -1;
if (SQLAllocStmt(Hdbc, &Hstmt) < 0 )
return -1;
return (0);
As said earlier there is a problem in SQLConnect. It is returning -1.
But the code should return 0 if successfully connected.
The info regarding the arguments used in the above methods:
HENV Henv; /* Handle to ODBC Environment object */
HDBC Hdbc; /* Handle to ODBC Connection object */
HSTMT Hstmt; /* Handle to ODBC Statement object */

Error while connecting to Oracle 8 from PI 7.1

I am trying the connect oracel 8.0 from PI 7.1,
I am getting following error in communication channel monitoring
"Exception caught during JDBC adapter processing: java.lang.NullPointerException "
at the same time I can connect to oracle 10g smoothly without any error.
Please suggest what would be the reason.
regards,

Hi Check this thread
same problem disueed here & solved
Error in Sender JDBC communication channel
Regards
Abhishek

Connect to Oracle 8i from Forms 6

I have installed Personal Oracle 8i and developper 6 in a NT. I got the error when tried to connect to the Oracle 8i from Form Builder. "could not resolve service name".
I did enter the database name.
Any ideas?

This is a tnsnames problem...check the entry in tnsnames.ora and make sure
its
point to the right DB...there will be a tnsnames.ora under Network and also
a
tnsnames in the developer directory ..FORMS will use the tnsnames under
developer..
Supply the connect string with and without the domain to see if
that works
You can find the domain name in sqlnet.ora file.
null

Unable to connect to Oracle 9i from Forms 6i

Hi,
I have Oracle 9.2.0 (Personal edition) and Forms 6i installed on a Win2K PC.
I am able to connect to the DB from SQLPLUS. But, I am unable to connect to the DB from Forms 6i. Can anyone suggest where am I going wrong and what is that I need to do to resolve the problem.
Thanks in advance!!!

Normaly forms6i uses Tnsnames.ora file to connect to the database. You need to setup your Tnsnames.ora file correctly by clicking Start---Programs---Directory for Oracle--Oracle net8 easy config, and configure your database connection.

ORA-12699: error when connecting to server with FIPS enabled

Hi all,
I have a oracle client and server with FIPS enabled on them. When I use SQL Developer from the client, I can connect to the server and run queries on them.
I have an ADO based application, which I am trying to run on the client to query the oracle server, but the open database call seems to fail on this with the ORA-12699 error ..
Heres the connection string I am using ... "Provider=OraOLEDB.Oracle;Data Source=Test;User Id=scott;Password=tiger;"
Are there any other options to be added to the connection string string ?? any ideas / comments would be of great help ...
Note : I am using Oracle 11G ..
--sachi

Naveen,
Forms 5.0 is not certified and not tested with Oracle DB 10g because it was desupported before 10g got released.
The other problem is hard to give a generic answer for and I suggest to address this to metalink.oracle.com
Frank

Error when connecting linux oracle dataabse for replication thru oms

I have installed oracle 8.1.7 ee on Redhat linux 7.1 and 6.2 both and also on windows2000.
When i try to access database of any oracle installed on linux machines from any of management server it gives following errors:
ora-01034 oracle not available
ora-27101 shared memory realm does not exist
linux error:2: file or dir does not exist.
if i try to access dataabse without login to any management server ( i.e thru dba studio) then it connects to it.
i want to setup master replication with two linux machine database.
if any person has solution for this then please help me.
Thx in advance
if possible mail me at [email protected]
thx in advance
pranav shah
null

1010056 wrote:
When iam connecting getting the following error
[rmancln@orawave ~]$ sqlplus '/as sysdba'
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Jun 5 21:16:53 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select status from v$instance;
STATUS
MOUNTED
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u01/rmancln/oradata/CLN/system01.dbf'provide details on what events lead up to this situation.
[oracle@localhost ~]$ oerr ora 1152
01152, 00000, "file %s was not restored from a sufficiently old backup "
// *Cause: An incomplete recovery session was started, but an insufficient
//         number of logs were applied to make the database consistent. This
//         file is still in the future of the last log applied. The most
//         likely cause of this error is forgetting to restore the file
//         from a backup before doing incomplete recovery.
// *Action: Either apply more logs until the database is consistent or
//         restore the database file from an older backup and repeat recovery.

Sun Ray error when connecting to Oracle VDI - No Kiosk Sessions Available

When the Sun Ray DTUs go to connect to the Oracle VDI cluster at times they will throw the error "Error starting Kiosk session: No Kiosk accounts configured." We have tried going through the steps to confirm that the Kiosk sessions are configured on the two secondary hosts but the problem persists. When the Sun Ray DTUs do connect they will work for a while and then when left idle for a period of time will loose their connection and be unable to restart the connection with the error mentioned. The Screen Blanking option on the Sun Ray DTUs is set to "0" to prevent them from going into power-save mode but this makes no difference. The Sun Ray DTUs are all updated with the latest GUI firmware and there are no custom options set in the Sun Ray Session Servers.
The thing that bothers me the most is I have not seen any error messages in the logs. I will post up the logs as links in a follow-up post.
Has anyone had any similar issues while connecting with a Sun Ray DTU?
Currently we are running Oracle VDI 3.2.1 on the cluster.
Here are the commands we used to reset the Sun Ray Kiosk accounts:
# /opt/SUNWkio/bin/kioskstatus -c
# /opt/SUNWkio/bin/kioskuseradm status
# /opt/SUNWkio/bin/kioskuseradm delete
# /opt/SUNWkio/bin/kioskuseradm create -l utku -g utkiosk -i auto -u –c

I was trying to transfer data from oracle to sql server 2008 on a daily basis.
I have very hard time connecting to oracle from ssis package on windows server 2008. I am almost dead and cannot find any help. i was able to connect to oracle using import/export 64 bit feature of SQL Server 2008 using Oracle provider for OLEDB. But I am not sure why the same does not work with BIDS?
Here's the environment info:
1. Oracle Client 10g
2. SQL Server 2008
3. Windows Server 2008
Appreciate your help. Please save me.
Thanks,

TNS Ora-12532 error When connecting with Db11 running in the VM

I created a virtual machine from the PVM Entrerprise Linux 5 64 bits and db11g.
Inside the virtual Machine the sqlplus system/manager1@VDB11 is working well.
The tnsping 172.20.0.33 is working well too.
But from the other external machine using oracle 11g client these command are not working: Tns Ora-12532 error.
What to do?
Thanks

my virtual machine: vm1 have an static ip address 172.20.0.33
the oracle listener is was configured with the same ip
in the virtual machine : vm1 the /etc/hosts file content is:
127.0.0.1 localhost.localdomain
172.20.0.33 virtualdb11
in the tnsnames.ora file in the virtual machine i have a service:
VDB11 ...( host=172.20.0.33) (port=1521)
under console connection with my virtual machine vm1 the command : sqlplus system/manager1@VDB11 is working well
but when i working in an other external machine , where the tnsnames.ora have an entry:
VDB11 ...(host=172.20.0.33)......
the ping command : ping 172.20.0.33 is working well
but sqlplus system/manager1@VDB11 is not work and return the error:
ora-12532 tns

ORA-12514 Error when connection from OEM

I have RAC database. I can access Cluster from https://rs1pre91dvdba01.pre.ccosvc.com:5500/em
but when clicking on database tab -> Performance -> Afer giving username / password I get
Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descriptor The Connection descriptor used by the client was: (description=(address_list=(address=(host=rs1pre91cl)(protocol=tcp)(port=1521))(address=(host=rs1pre91cl)(protocol=tcp)(port=1521))(load_balance=yes))(connect_data=(service_name=DWH1)))
[oracle@rs1pre91dvdba01 admin]$ . oraenv
ORACLE_SID = [oracle] ? DWH1
The Oracle base for ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1 is /u01/app/oracle
[oracle@rs1pre91dvdba01 admin]$ emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://rs1pre91dvdba01.pre.ccosvc.com:5500/em/console/aboutApplication
Oracle Enterprise Manager 11g is running.
Logs are generated in directory /u01/app/oracle/product/11.2.0/dbhome_1/rs1pre91dvdba01_DWH1/sysman/log
How can I access Performance tab from OEM.
thanks.

[oracle@rs1pre91dvdba01 admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 02-FEB-2011 15:37:35
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 05-JAN-2011 12:06:28
Uptime 28 days 3 hr. 31 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/rs1pre91dvdba01/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.2.201)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.2.203)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Service "DWH1" has 1 instance(s).
Instance "DWH11", status READY, has 1 handler(s) for this service...
Service "DWH1XDB" has 1 instance(s).
Instance "DWH11", status READY, has 1 handler(s) for this service...
Service "MDM1" has 1 instance(s).
Instance "MDM11", status READY, has 1 handler(s) for this service...
Service "MDM1XDB" has 1 instance(s).
Instance "MDM11", status READY, has 1 handler(s) for this service...
The command completed successfully
[oracle@rs1pre91dvdba01 admin]$ lsnrctl service
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 02-FEB-2011 15:37:44
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:34200 refused:0 state:ready
LOCAL SERVER
Service "DWH1" has 1 instance(s).
Instance "DWH11", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:106 refused:0 state:ready
LOCAL SERVER
Service "DWH1XDB" has 1 instance(s).
Instance "DWH11", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: rs1pre91dvdba01.pre.ccosvc.com, pid: 6845>
(ADDRESS=(PROTOCOL=tcp)(HOST=rs1pre91dvdba01.pre.ccosvc.com)(PORT=45445))
Service "MDM1" has 1 instance(s).
Instance "MDM11", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:56105 refused:0 state:ready
LOCAL SERVER
Service "MDM1XDB" has 1 instance(s).
Instance "MDM11", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: rs1pre91dvdba01.pre.ccosvc.com, pid: 24224>
(ADDRESS=(PROTOCOL=tcp)(HOST=rs1pre91dvdba01.pre.ccosvc.com)(PORT=59486))
The command completed successfully
[oracle@rs1pre91dvdba01 admin]$ id
uid=500(oracle) gid=500(oinstall) groups=500(oinstall),501(dba)
[oracle@rs1pre91dvdba01 admin]$ env | sort
ASM_SID=+ASM1
_=/bin/env
COBBLER_SERVER=ccoshs02xvsat01.ccosvc.com
DB_HOME_BIN=/u01/app/oracle/product/11.2.0/dbhome_1/bin
DB_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
DISPLAY=localhost:10.0
DWH_SID=DWH11
G_BROKEN_FILENAMES=1
GI_HOME_BIN=/u01/app/11.2.0/grid/bin
GI_HOME=/u01/app/11.2.0/grid
GRID_HOME=/u01/app/11.2.0/grid
HISTSIZE=1000
HOME=/home/oracle/
HOSTNAME=rs1pre91dvdba01.pre.ccosvc.com
INPUTRC=/etc/inputrc
LANG=en_GB
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/dbhome_1/lib
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
MAIL=/var/spool/mail/oracle
MDM_SID=MDM11
NLS_DATE_FORMAT=dd-mm-yyyy hh24:mi:ss
OLDPWD=/u01/app/oracle/product/11.2.0/dbhome_1/rs1pre91dvdba01_DWH1/sysman/config
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
ORACLE_SID=DWH1
ORACLE_UNQNAME=DWH1
PATH=/u01/app/oracle/product/11.2.0/dbhome_1/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/sbin:/home/oracle//bin
PWD=/u01/app/oracle/product/11.2.0/dbhome_1/network/admin
SHELL=/bin/bash
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_CLIENT=172.30.0.125 58337 22
SSH_CONNECTION=172.30.0.125 58337 172.30.2.201 22
SSH_TTY=/dev/pts/0
SVN_EDITOR=vi
TERM=xterm
TNS_ADMIN=/u01/app/11.2.0/grid/network/admin
USER=oracle

Error when connecting an oracle DB with Integration gateway

I followed the steps from the blog How to connect an Oracle DB with Integration Gateway in SMP3 and the ojdbc was deployed successfully to SMP. Still, i'm getting "Driver class oracle.jdbc.driver.OracleDriver not found" error message when i try to test my connection. The first difference i saw when completing these steps was that I'm using SMP3 SP05, could this be the issue?

Joao D Franco Net
Could you share below information:
Can you cross check if deployed driver are OSGi enabled? Refer this.
Can you share screenshot of the destination settings and error ?
note: The blog you followed is referring to SP03 (1st GA of SMP3)..You should not have any problem in connecting to Oracle DB being on any SP.
Regards,
JK

I met an error when connect to oracle db with tag sql:DataSource

When I use the jstl tag <sql:DataSource> connect to oracle db ,I met an error as :
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: No suitable driver"
My Source code as follow:
<sql:setDataSource var="dataSource" driver="oracle.jdbc.driver.OracleDriver" url="jdbc:oracle:thin:@192.168.1.220:1521:gzserver" scope="request" user="lnmisscall" password="lnmcadmin"/>
<sql:query dataSource="{$dataSource}" var="data">
I am sure the connection information are right (I can connecte to the db with them in jsp & java bean) , and I have put the oracle's jdbc driver under the tomcat/common/lib folder,
Please help me to fit it ,thanks.

Sabrina,
Its all dependent on the application and whether its 32-bit or 64-bit. For example, SSRS reporting services 2008 R2 is a 64-bit application, so load the 64-bit oracle client there for report execution. Report builder is a 32-bit client application,
assuming its running on a different machine, so load the 32-bit oracle client on any user computers using RB 3.0 and working with Oracle. If the computers are one in the same, then do as the post above says, load both...

ORA-03106 Error when connecting to Oracle 10g from Forms 6i

Similar Messages

Maybe you are looking for