"Accidentally" installed Vista onto my new 13' Macbook Pro and am now stuck in WIndows.
I installed Vista on the newest model, and yes, I realize now that it doesn't accept anything other than Win 7. I am now in Vista with the Wifi not working and no visible way to switch back to OSX. How can I get back to the Mac side, and additionally uninstall Vista? The CD i made earlier to complete Boot Camp installation gives the error:
D:\
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail.
Please help.
you didn't read how to use Option key? basic Mac 101 what the startup keys are.
x = Mac OS X also
Option or Command + r = Lion Recovery
Option = boot OS selection
In OS X to go Startup Disk control panel (system preferences) and set to OS X
Use BCA to remove, download and burn Windows 8 RP, free for now, and burn that to a DVD (2x slow speed) and just format-install over Vista partition.
Similar Messages
-
I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop (which I no longer have). I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop.
How do I do this?
(when I click on the Sync option I get the warning: "Are you sure you want to sync music? All existing songs and playlists on the iPhone will be replaced with songs and playlists from your iTunes library." I fear that if I click this I will lose all of my important Voice Memos as well)Just to add to what ChrisJ4203 said. You can sync them to your new computer using iTunes by selecting to Include Voice Memos on the Music tab of your iTunes sync settings and syncing. However, you still need to re-establish syncing with the new computer without iTunes erasing all the iTunes media from your phone (as the warning mentioned).
If you copy your entire iTunes folder (not just your music) from your old computer to your new one, along with other non-iTunes media you may be syncing with iTunes (such as contacts, calendars and any photos synced to your phone from your old computer) by using migration assistant of following one of these methods: http://support.apple.com/kb/HT4527, then when you sync again with your new computer it will recognize your phone and sync as it did before. You will still have to authorize the new computer for any Apple IDs used to purchase from the iTunes and App stores (in iTunes>Store>Authorize this computer).
After that you can sync your voice memos to your computer as mentioned earlier.
If you want to archive your voice memos before you do anything with iTunes, you can use a 3rd party program such as PhoneView or Touch Copy. -
I installed CS6 on my new retina MacBook pro laptops. InDesign and Acrobat display document pixilated. I ran the updates and it fixed Illustrator and Photosho, but not InDesign and Acrobat. What can I do to make them display in high resolution? HELP!
InDesign CS6 is not optimized for retina displays. You’ll need to move to Creative Cloud for retina compatibility.
-
As the title says.
I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
I don't want to restart it because im scared that something might go wrong.
operating lionLimitLess- wrote:
Hi,
I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
Thanks
I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread. -
Can i use my 15" macbook pro application install dvd on my new 13" macbook pro?
can i install my15" macbook pro application install dvd on my new 13" macbook pro?
Depending on how old that Applications DVD is you may or may not be able to use it. Give it a try.
-
I am new to macbook pro and have msmoney files (mbf) stored on an external harddrive. I want to transfer them to MoneyWiz and need to convert them to qif. Does anyone know of any free software available and how do I do it. Thanks.
iTunes>Preferences (Cmd+,)>Advanced
Choose the Ext HD (and the appropriate folder) as the location for your library. -
I installed Yosemite yesterday on my 2013 MacBook Pro and Word does not open anymore.v Any advice/solution?
How to completely remove Office for Mac 2011
Do it per these instructions, don't just put the apps in the trash. -
I'm new to Macbook Pro, and never imagined I would have problems saving bookmarks when I switched to Mac. Any suggestions with this issue? I have Safari 6.0.4, and has Apple come up with a permanent fix?
Triple-click the line below to select it:
~/Library/Safari/Bookmarks.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above. -
I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
What is the difference between the new 13" MacBook Pros and the previous version of the 13" MacBook Pro? I purchased an "old" one from Best Buy the day before the announcement of the new models.
See the specs:
Compare Notebooks - Apple Store (U.S.)
Compare with your model. If you are within 14 days of purchase you can exchange for the new model for the difference in price, if any. Be sure to have all the original packaging and your receipt. -
What is the difference between the new 13" MacBook Pros and the previous version of the 13" MacBook Pro?
Note that iStatPro has not been updated in quite awhile and may not be reading the guts of a totally new system correctly. IIRC, the Late 2011 MBPs were beginning to tax iStatPro already, as they had newer sensors the older code was completely unaware of.
For strictly measuring temps on the guts of these newer Macs, maybe use Marcel Bresink's free Temperature Monitor? Last updated in March 2012. In my Late 2011 15" MBP, it picks up all 18 sensors...
http://www.bresink.de/osx/TemperatureMonitor.html
Or go whole hog for his Hardware Monitor, for oodles more info from the Mac. Follow the Products link from above. -
How do I install a purchased CD of Adobe Creative suite onto a new 2013 Macbook Pro?
Dear Apple Community,
I recently purchased a 2013 Macbook Pro, and I was not aware that it was going to be difficult reinstalling Adobe Creative Suite 5.5 onto this computer, since the Suite is from a CD I purchased a little over a year ago. I would like to know how I can reinstall the adobe creative suite 5.5 onto this laptop which doesn't have a CD slot built into it? Is there a way I can contact adobe and just download the suite and provide my serial number without having to purchase. Keep in mind, I'm a student. How do I get adobe on this laptop?
Thanks!Most Adobe products are identical between downloaded and physical media, requring their registration keys to enable them.
You can try downloading a trial version from Adobe, if available, or here and then you would authorize it with your serial number.
If you need to install it from disc, you can simply purchase the Apple external USB SuperDrive or try to find someone that has one. -
Running setup on a late 2013 Retina Macbook Pro for the first time process gets stuck saying "Less then a minute remaining". Transfer is via USB from a clone of my drive on an external drive that is bootable from my 2007 Macbook Pro running 10.68. Have run disk utility on drive and fixed premissions in advance of running set up. Have had the same happen when I activate the new Retina Macbook Pro without running setup and then running Migration ***'nt later.
Running setup on a late 2013 Retina Macbook Pro for the first time process gets stuck saying "Less then a minute remaining". Transfer is via USB from a clone of my drive on an external drive that is bootable from my 2007 Macbook Pro running 10.68. Have run disk utility on drive and fixed premissions in advance of running set up. Have had the same happen when I activate the new Retina Macbook Pro without running setup and then running Migration ***'nt later.
-
After installing a software update on my Macbook Pro, it would not reboot passed the gray screen and then would shut down.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
Why do I keep getting an error message when trying to install CC on my new Macbook Pro 13" retina? Keeps saying it is missing or damaged. I have a membership and have already installed the program on another computer - iMac.
Close all Adobe applications and Quit Creative Cloud desktop application .
1) Right click on Finder icon and select "Go-ToFolder " option.
2) You will get a text box, type-in below command and then hit 'Return' key.( Do not miss ~ symbol)
~/library
3)Then navigate to Application Support>Adobe.
Open Adobe folder and rename folders named AAMUpdater and OOBE to AAMUpdater-oldand OOBEold.
Then launch Creative Cloud app and check.
Maybe you are looking for
-
How to configure multiple jsp files with diff beans in faces-config.xml??
Hi All, I have 2 seperate jsp pages one is a login page and the other is the main application page.Now i am handling both the pages with seperate Bean class with respective setter and getter methods.How can i state the same in faces-config.xml file??
-
Why can't i connect to any of my bluetooth devices that i have already paired?
Why can't I connect to any of my Bluetooth devices i have already paired with?
-
OINM not balancing to trial balance (JDT1)
I have written a report that produces sales and purchases per item from the OINM table using the InQty, OutQty and Price fields. The quantities are 100% correct but if I compare the total sales figure to the trial balance figures I get different res
-
Mapping lookup up failure with input JavaBean with an array of strings
To receive input data our Web service defines a JavaBean one element of which is an array of strings. When a test Java client calls the service method the call is completed successfully. When a Perl client calls the service method an exception is ret
-
Using AppleCare and AppleCare+ in Puerto Rico?
This summer I start medical school in Puerto Rico, and I plan on buying a MacBook Pro and an iPad. I there are several authorized service providers in PR, including one in the town I will be attending medical school. I would be purchasing it all her