Accordion all panels closed and SpryURLUtils

http://www.adelantedesign.co.uk/websites/adelante/Packaging/Packaging_Samples01.asp?panel= 0#Accordion1
The above does not open panel 0, change it to panel=1 or
panel=2 etc opens fine.
I am using this to keep all panel closed:
var Accordion1 = new Spry.Widget.Accordion("Accordion1",
{useFixedPanelHeights: false, defaultPanel:(params.panel ?
params.panel : -1)});
I've read a few posts but not seen a solution. Any ideas.
Rich

Can I use this same method to jump to another pages'
Collapsible panel, versus accordian panels, or tabbed panels ( i
asssume I can use the following, added on the first collapsible
panel contructor on the target page (or do I have to add it to all
my contructors including creating a default params for the html
panels, also existing on the same page as the collapsible panels):
var cp1 = new
Spry.Widget.CollapsiblePanel("cp1",{contentIsOpen:false,
CollapsiblePanel: params.Panel !=undefined ? params.Panel : -1});?
I want to jump to other pages' Collapsible panels' and then load
specifc HTML fragments in the SpryHTMLpanel, existing inside the
targeted collapsible panel. The link is coming from another pages,
SpryHTMLPanel, from inside a collapsible Panel. I have added the
appropriate <script> src and initalized the var params in the
head on the target page.

Similar Messages

Spry Accordion- all panels closed by default

1) Can I have an accordion so that none of the panels are open by default?
2) Changing the height of the panels: Can it be set determined by the amount of content inb a panel? I have 5 panels, and each is populated with data from a database. some may need much more room than others.
Thx,

You can add it immediately after the Accordion if you want to - but then you end up with scripts scattered throughout your page(s).
Most of the time I see it added to the bottom of the page. I also do this as I've had several SPRY Elements doing stuff at one time and you can simply combine them into a single list.
Add adri_grace's Code in a Script Tag to the same page that the Accordion is located on.
At the very bottom - just before the Closing for the BODY and HTML Tags.
So you end up with something like:
<script>
var Accordion1 = new Spry.Widget.Accordion("Accordion1",.....
.....{ useFixedPanelHeights: false, defaultPanel: -1 });
var Accordion2 = new Spry.Widget.Accordion("Accordion2",.....
.....{ useFixedPanelHeights: true, defaultPanel: 3 });
var Accordion3 = new Spry.Widget.Accordion("Accordion3",.....
.....{useFixedPanelHeights:false, enableAnimation:false});
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1",.....
.....{defaultTab:7});
</script>
</body>
</html>
Go here:
http://labs.adobe.com/technologies/spry/samples/
Click on the Widgets Tab.
*the dots for each example above are for continuity in the word-wrap - don't include in code.

Accordion Spry default all panels closed

How do I setup the Accordion Spry to have all panels closed
when my page initially loads? I don't want any of the panels to be
set as the default opened panel and for the browser to select the
panel they want open first.

I have installed Spry 1.6.1.
Here is my code:
var Accordion1 = new Spry.Widget.Accordion("Accordion1",{
defaultpanel: -1 });
Still opens the first panel upon loading my page with the
Accordion spry. There must be something else to be
configured?

Start Accordion all closed

I am putting in an accordion and want all panels to start as closed. All the info I can find is about setting the default open panel. I don't want a default open panel; I want all panels closed to start. Can this be done?

http://labs.adobe.com/technologies/spry/samples/accordion/AccordionSample.html#AllPanelsCl osed

How can I use the tabbed panel with the accordion panel options of close all panels and over/not overlap the items below?

Ideas for features in Adobe Muse

I assume this is what you want to achieve in the footer....
Make sure in Muse before you export that the panel is closed, and also as Brad suggested, make sure Overlap Items Below is unchecked. I would also check the "Can Close All" button.

All panels open in Accordion

Hello there fellow Spryers,
I'm trying to use the Accordion widget. I'm building its divs
dynamically and they display fine in Firefox. But when i switch to
IE6 , all panels are open and it doesnt work correctly. I have
placed the accordion widget inside a td from a table.
Is there a solution to this problem? If anyone needs the code
i can provide it.
Thanks in advance,
Kostas Lagos

"PorcupineRabbit" <[email protected]> wrote
in message
news:f1cmum$ghg$[email protected]..
> I just found a temporary solution to this. Accordion
widget doesnt seem to
> like the xml definition, on the top of the
document..when i remove the
> <?xml
> version="1.0" ?> declaration everything works
fine..Is there a way to
> compromise this?
Looks like your browser went into QuirksRenderingMode. See
here for more
details:
http://css-discuss.incutio.com/?page=RenderingMode
Hope it would help
Massimo Foti, web-programmer for hire
Tools for ColdFusion and Dreamweaver developers:
http://www.massimocorner.com

Spry Accordion how to open on load panels closed

I'm having problems with spry accordion on load panels closed. I tried putting the changing the var in the javascript usedFixedPanelHeight: false:, and that didn't work. The box would come up saying that this javascript will not work for this accordion. I tried *Closed* in the accordion div tag and that didn't work. Can someone help me please. I'm trying to load panels closed.
Thanks for your help.

I was looking at that link you gave before I submitted this post. It wasn't very clear to me.
1. You say set the default panel set the defaultPanel option to - 1?. Where is the defaultPanel located? When I click the button to create a spry Accordion it only gives me options of creating panels. Is the defaultPanel panel located is the CSS tab?
2. The link you gave says closing panels only works with variable height. Can you tell me what is variable height? I looked at the code at this page to see if I could see what it was doing. I observed that the javascript at the bottom which is a variable was changed for the spry accordion. I copied and pasted code in my page and it didn't work.
I really trying to hard to figure this out. Thanks for your help.
Bobby

How to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.

how to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.

Hi bluegrandpanash,
Thanks for visiting Apple Support Communities.
If you backed up your iPhone to iCloud before updating the software, first try the steps under "Restore from an iCloud backup" in this article to recover your data:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Best Regards,
Jeremy

Front Panel objects do not stay in place after saving, closing, and reopening the VI.

I have been working with a couple of versions of a main VI. The original VI was given to me so that I could add additional functionalities to it. I had been designing the front panel of the latest version of the VI on a Dell laptop running Windows 7 and LabView 2011 SP1 using a monitor with a resolution of 1920x1080. My booleans, numerics, and plots on the front panel had always stayed in place after saving, closing, and reopening the VI. Once in the field, I connected my laptop to a cRIO9073 and used my laptop screen with a resolution of 1366x768 to operate the VI. I made some changes to the VI, saved it, and reopened it. This time I noticed that the front panel objects had become overlapped, resized, and generally rearranged. I tried fixing the objects but I noticed that they reverted back to the incorrect positions after saving and reopening the VI. I was successful in keeping the objects in position a couple of times, but when I would open the VI at a later time, the objects were again rearranged. This is happening on both my monitor and laptop screen. The original version of the VI, however, does not behave this way and I have opened it on both my monitor and laptop screen. In this version, the front panel objects always stay in place. Both VI's have the same window size properties. Could I have corrupted the latest version of my VI somehow? Below are screenshots of the front panels of both VI's.
Attachments:
Blender Controller Original.PNG ‏140 KB
Blender Controller.PNG ‏203 KB

Hi Miguel,
It is possible to programmatically set or change the position of front panel objects. (for example: http://digital.ni.com/public.nsf/allkb/4D0DA06B43195B3F862572F3000AF2D3?OpenDocument) However, if you haven’t intentionally done that, it seems unlikely that it is the problem.
Have you tried copying the entire block diagram in to a new VI to see if the problem persists? While it is unlikely, you are right that it is possible for VIs to become corrupted. I’ve never heard of a situation like this except in the situation where the settings Tom had you check have been changed. Here is some information about those settings:
http://digital.ni.com/public.nsf/allkb/7567EF257B9CFDF986256F630073228F?OpenDocument
Since there was no rearrangement when you copied the front panel to a new VI, you might try copying the block diagram a little bit at a time to see if there is some particular part of it that creates the problem somehow.
K. Johnson

I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was hot at charging time.

I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was working hot at chargering time. Apple need to address this asap!!!!

Hi Suzy Q,
I can send and receive calls.
I get "messaging stopped" when doing a lot of texts.
Texts come up "ghosted" meaning they have the text on the bottom and a transparent one overlaid on top. they then become one. But I get the ghosting most of the time when I go into a message from a contact to send a text.
When I go to call logs or text logs, the numbers come up first, and then then the names pop up randomly, meaning not in order down the page, until they are all shown. lots of lag time.
It runs slow.
I have 5 apps on here. I should be able to have a lot of apps on here, and play music, and have files, and...and....and.
I can get online but doing a Google search, when the page with the choices comes up, it is blurred and I have to tap on the screen for it to become clear and readable.
When online and scrolling, it hitches sometimes/lags/gets stuck then unstuck
I get VZWAVS has stopped. (not sure if those are the right letters)
The status bar that is supposed to be gray with the new update, goes back and forth between green--the old os--to gray. And I have found no continuity with when I get green or when I get gray.
I get a black screen on occasion.
sometimes the proximity sensor doesn't work.
sometimes when I have my bluetooth on and have "hands free mode" on, I get the a text message read through the headset and also through the handset.
I soft reboot often--turn it off wait a bit and

I downloaded a form and saved as pdf yet cannot attach to email, says in use but all are closed help!

i downloaded a form and saved as pdf yet cannot attach to email, says in use but all are closed help!

for the moment you can Forcequit, as Eustace said.
Really quit a program you do by clicking the menu bar of the program where its name is, on the bottom you see "Quit (appname)"; when it is in the Dock, rightclick it in the Dock and choose "Quit".
Now about yout attachment: it does not matter what you did to it and where you moved it, as long as Preview is still open it doesn't let it go.

I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I

I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I try to launch it, I get a screen headed Photoshop CS5 Extended Trial. It asks for the serial number and says that my trial has expired. It rejects the serial number from the Adobe case saying "This Serial Number is not valid for this product". It thinks that I still have the expired Trial Version installed. How do I convince it (the program) that the Trial Version is long gone and the currently installed product was installed with a valid and accepted serial number????

Let me know how it goes. Go into your Adobe account and register your serial number asap.
https://www.adobe.com/account/my-products-services.html
That way, should you lose it or you need support, it is on record that it's yours and you can fetch your s/n it from anywhere.
There are too may sad stories here, where people forgot and the box is buried or lost.
Gene

Combining image and text in accordion content panel

Hello,
I'm having difficulty displaying image and text together within an accordion content panel. What I need is a thumbnail photo of a staff member plus a short bio. I've put a panel together so it displays as needed in Live View, but not in IE8, Foxfire8, or Chrome. I'm using Dreamweaver 5.5, Spry 1.6.1, Windows 7.
Here's the code for the panel that includes an image not displaying:
<div class="AccordionPanel">
<div class="AccordionPanelTab">Stan Swiercz, Training Manager</div>
<div class="AccordionPanelContent">
<div class = "PanelImage"> <img src="/images/StanSwiercz.jpg"/></div>
Bio text goes here</div>
</div>
Here's a link to a test page (ignore funky color variations, still settling those). The panel that is set to open should display an image floating left with text wrapping, as it does in Live View.
http://cet-training.org/Test%20folder/people.html
I''ve double-checked documentation, help, and done searches, but can't find any information about what should be an easy thing to do. Any help out there?
Thank you very much,
George

The location of the image is http://cet-training.org/Test%20folder/images/StanSwiercz.jpg (click the link to see the image)
This is the markup from your document <img src="/images/StanSwiercz.jpg"/> which means that the image is located in the images folder which is located in the root directory.
Hence the image cannot be found by your document.
The following are possible solutions, please choose one only
change the location of the images folder to reside in the root directory
delete the leading slash from the link as in <img src="images/StanSwiercz.jpg"/>
change the link to an absolute value as in <img src="http://cet-training.org/Test%20folder/images/StanSwiercz.jpg"/>
Gramps

My iphone 5s (7.1) has permanently the search icon, as if searching network. This affects the speed of email and consumes a lot of battery. This happens even with all applications closed. I have restored the iPhone but the problem persists. Do you have an

My iphone 5s (7.1) has permanently the search icon, as if searching network. This affects the speed of email and consumes a lot of battery. This happens even with all applications closed. I have restored the iPhone but the problem persists. Does anyone have an idea of the solution?
Thanks!!

Try to reboot the iPhone, if that doesn't help make a backup via iTunes, and restore the iPhone via iTunes.
Otherwise disable background refresh, and kill all apps

When I try to add video to iMovie on iPod Touch, none of the videos show up to be added. I've restarted the iPod twice, closed all the apps and then reopened iMovie. Please help!

When I try to add video to iMovie on iPod Touch, none of the videos on the Touch show up to be added. I've restarted the iPod twice, closed all the apps and then reopened iMovie. Please help!

Now You lost me (without using a computer?) - Most probably due to that I've not got an iPod Touch but mine is seven Years old - so it most probably work in a totally different way.
Sorry
Yours Bengt W

Accordion all panels closed and SpryURLUtils

Similar Messages

Maybe you are looking for