Accordion problems in Explorer
In Explorer the page jumps to the top of the accordion when I
click to expand a section. It works fine in Firefox. Is there any
way to keep it from jumping in Explorer. Here is the page I'm
working on...
http://www.phillyshrm.org/chapter_center/board_spry.htm
I looked at the html as well. Because your widget has a
tabindex it put's the focus on the widget after you clicked a
panel. However putting the focus on the total widget causes IE to
position the cursor at the beginning of the widget.
When you remove the tabindex attribute it works fine, however
you cannot tab to the widget with your keyboard, and therefor you
loose keyboard navigation, which is bad.
The better solution is to dive into the onPanelClick function
in the SpryAccordion.js file.The last line of that function calls
the focus function which in case of IE you don't want. Remove this
line and it works fine.
Similar Messages
-
Accordion Problem in Internet Explorer
Hi,
This is the scenario, i developed a small framework and gave
it to the developer,
which included a Accordion, which i accomplished via using
Spry Widget in dreamweaver.
Now the problem is, everything works fine when viewed in
Firefox and where as in Internet
Explorer the Accordion doesn't seems to work well. Someone
point me in the right direction;
on what could be wrong.
The site is:
www.novanavigator.com
Visit here
or
Novanavigator
Username: rip4demo
Password: prana@123
And once you get into the cart, click on the
"My Subscribed Products" you will notice
the odd accordion in Internet Explorer, this exists in
version 6.0 as well as in 7.0
For your reference i've attached the
"SpryAccordion.css" file.
Thanks in advance.
AmarnathLive text reflows differently (even when using the same font) in different browsers, browser versions, operating systems and devices.
To have this image appear at a consistent location in the text flow, cut it, click an insertion point in the text frame where you want the image to be and paste. Then select the image with the text tool (as though it's a very large character) and use text alignment to center it. Pasting it into the text frame will cause it to be treated as a character in the text flow and thus it will appear at a consistent location when the text is laid out differently in different browsers. -
Problem with explorer.exe when LR starts
When starting LR (V1.0) the task manager reports that explorer.exe is eating up about 50% of my CPU. Closing LR does not have an effect. Only a re-start clears it up. This is now the second time I have installed LR as there was a conflict the first time I upgraded from the beta 4 version. I have searched through many of the same folders that my LR library uses with Bridge and Windows explorer and there was no problem with explorer.exe. Only upon starting LR does the problem occur. Any advice much appreciated. Thank you!
Windows XP Media Center Edition SP2
Pentium 4 3.2 GHz
2 GB RAMFirefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz.
http://sourceforge.net/projects/kernelex/ -
In the same computer I have Firefox and Safari and in both
the flex application works well, but in Explorer 7 when I type text
some of the characters I typed are missing in the screen.
Is there a problem between Explorer 7 and Flex?
Do I need to add something to the Flex code to make work in
Explorer 7?
Any ideas.
Thanks!!I also see this problem, which has existed for some time. Is
Adobe doing something to rectify this issue?
Doug -
I cannot open any site with firefox, but have no problems with explorer. on the tabbar ontop it says untitled and when I click on ant bookmarsite or click on a link in an email from outlook, the untitled will change into loading (for only one split second) and right back to untitled.
Maybe these will help:
https://discussions.apple.com/message/17677533#17677533
https://discussions.apple.com/message/18324129#18324129
https://discussions.apple.com/message/18203126#18203126 -
Spry Accordion Problem in Internet Explorer
Hi,
i have created a spry accordion menu in Dreamweaver CS3. My
problem is that when I click in Internet Explorer, small selection
handles appear all round the accordion object. This looks quite
poor then. Any ideas how I can get rid of these?
Thanks.Except for the fact that Spry Accordions are involved, the problem is hardly Spry related.
Having said that, I will try to help you on your way to solving your problem.
The following is a list of my observations
the <div id="wrapper"> on line 74 does not have an ending tag
<div class="right-column" has 35px padding on the right but not on the left. Because IE interprets the so-called box model differntly to other browsers, and because the div is floated right, the left edge of the div will be pushed further to the left than on other browsers. It may be an idea to put at least some of the padding on the left to keep it clear of the divider line
the field set in your contact form is 460px wide, the div surrounding it is only 440px and again IE reacts differntly to other browsers in that it expands the parent to suit the child. Try reducing the width of the fieldset to say 400px. -
Spry Accordion in Internet Explorer 6 - panel visibility
I am totally in love with the ease of Dreamweaver and these sprys I could not do my fancy eyecandy stuff without it.
Sadly I must check that our Grandma Internet Explorer 6 works with my page.
I have a spy accordion and I have removed all colors and put it in a div that has a background image.
When you click on a tab and a panel slides down then as it slides in FF or IE7/8 the text of the panel is revealed progressively.
In IE6 ALL of the text of the panel is immediately revealed and then the sliding down action happens. Similarly when you close it the sliding up action happens first and then the panel text dissappears. As I said it only happens with IE6.
I am wondeing what I need to do to fix this. I am sorry but I do not have a live version of my page.Glad to know that you have fixed the problem.
I have checked the compatibility of spry and the ie7.js fix JavaScript files, and there was some compatibility issues in the past, but these (should have), been fixed.
The problems with messing up the display in IE6, are probably caused by IE6's css usage being brought into line with the standard css usage, which will cause problems for many if you do not know about them.
To help you with future IE problems here is a link showing most (if not all) know problems with the IE browsers.
http://www.positioniseverything.net/index.php, the link for IE only problems is under, 'browser specific bug demos'.
Hope this is helpfull.
PZ -
new HP computer with windows 8.1. Firefox does not work well with the touch pad when scrolling . very slow and erratic, most noticeable when using facebook. I don't have this problem when using Internet Explorer 11.
Old computer had windows 7 and my preference was to use firefox over explore. At this time i'm being forced to use explore and firefox is to aggravating to use.Currently Firefox is not available for metro devices.
However, make sure that the touch features are enabled by searching for "touch" in the about:config entries.
In order to change your Firefox Configuration please do the following steps :
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''' to continue to the about:config page. -
Bridge CS4 causing problem with Explorer
The following problem occurred after adjusting the Preference settings in Bridge CS4:
When right clicking on any folder in either the Explorer or on the Desktop the following message is displayed "Windows Explorer has stopped working..."
This is now the second time, after having created two new User Accounts. While Explorer worked perfectly for a couple of days before adjusing the settings in Birdge, I cannot undo what has caused this problem and am reluctant to setup yet another user account. Also, I can't figure out which setting change might have caused this.
Is it possible that by adjusting the settings in Bridge it added a shell extension to Windows Explorer?
Has anyone here encountered a similar problem after adjusting the settings in Bridge?
Cheers,
Michael
Ps. this has also been posted in the Phtoshop forumSorry, did not read your mail before sending the first answer...
Glad it works again. Remember that OSX is Unix based and does not like
strange caracters in folder and file names, and no slashes or dot's except
the dot before a three caracter file extension.
SOLVED! -
CSS layout problems in Explorer (fine in Firefox and Safari)
Firstly apologies to the mods, I had mistakenly posted this
in the dynamic section also...
My problem - I am working on a CSS site (my first!) here
http://www.benfrain.com
It appears fine in Firefox (PC and Mac) and Safari (mac) but
when I view it in Explorer for Mac (5.2.3) I get a over long page
and I get no auto margin on the left.
Another small curiosity - I have noticed that my background
image on my div id "header" seems to start off again on the right.
Again, Explorer 5.2 for mac only...
My html and css both validate.
Anybody know why this is happening?quote:
Originally posted by:
bregent
>It appears fine in Firefox (PC and Mac)
Have you tried increasing the text size?
Do you mean in the browser? I just tried it in Firefox and
after two increases the layout/style of the page kind of 'falls
apart' - how would this be rectified? -
Hi,
I have created a Spry Accordion containing 7 sections, using CS4. It works perfectly in Firefox, however there is a strange bug in IE7. The top section requires the scrollbar and this is working ok. However, the other 6 sections all have the same problem (btw, none of these other 6 are needing the scrollbar as the text does not fill the content area) - the bottom line of text in each of the 6 other accordion sections is not displayed. All the other text in the 6 sections is ok (other than the fact that the top margin is non-existent - I assume that can be fixed fairly easily)
Has anyone else had this problem, and are there any know fixes?
many thanks for any help offeredSince the answer to your question requires some knowledge of Spry, you might want to post it in the Spry forum. Be prepared to post a URL to the problem page, if asked.
Mark A. Boyd
Keep-On-Learnin' :-) -
UWC Login problem from explorer
Dear All
I am having funny problem with UWC, if I try to login to uwc via windows explorer with correct username and password repeatedly I receiving login page and uwc leave some errors in regards of SSO, but if I use the firefox, I can login to UWC with no problem and also UWC doesn't leave any error, I can't understand what is the problem,
here is the error if I use the windows explorer,
Dec 3, 2006 2:05:19 AM com.sun.uwc.common.auth.IdentitySSOAuthFilter doFilter
WARNING: SSOException..Invalid session ID.
Best regards
Mo.
Message was edited by:
m-meskarianHi Jay
for some reasons as soon as I try to access the uwc from explorer even without login I get the below error and warnings inside the uwc log.
Dec 5, 2006 2:09:59 PM com.sun.uwc.common.auth.IdentitySSOAuthFilter doFilter
WARNING: SSOException..Invalid session ID.
Dec 5, 2006 2:09:59 PM com.sun.uwc.common.util.UWCPreferences node
SEVERE: Could not load the file: /var/opt/SUNWuwc/WEB-INF/domain/en-us/i18n.prop
erties (No such file or directory)
Dec 5, 2006 2:09:59 PM com.sun.uwc.common.util.UWCDomainCache loadUWCResourceBun
dle
WARNING: Unable to load default resource bundle for domain mycom-int.co.ukand lo
caleen-us
Dec 5, 2006 2:09:59 PM com.sun.uwc.common.util.UWCPreferences node
SEVERE: Could not load the file: /var/opt/SUNWuwc/WEB-INF/domain/en-us/i18n.prop
erties (No such file or directory)
Dec 5, 2006 2:09:59 PM com.sun.uwc.common.util.UWCDomainCache loadUWCResourceBun
dle
WARNING: Unable to load default resource bundle for domain mycom-int.co.ukand lo
caleen-us
Dec 5, 2006 2:09:59 PM com.sun.uwc.common.util.UWCDomainCache loadUWCTheme
WARNING: Theme for localeenandmycom-int.co.uk is not configured
Dec 5, 2006 2:09:59 PM com.sun.uwc.common.util.UWCDomainCache loadUWCTheme
WARNING: Theme for localeenandmycom-int.co.uk is not configured
Best regards
Mohammad -
Problem in Exploring the Decision Tree Model on Lesson 4 Basic Data Mining SSAS
Hello everyone,
I've tried to follow all the steps mentioned in Basic Data Mining Tutorials, but I've an odd problem in the Lesson 4 - Exploring the Decision Tree Model (http://technet.microsoft.com/en-us/library/cc879269.aspx).
It's stated that "As you view the TM_Decision_Tree model
in the Decision Tree viewer, you can see the most important attributes at the left side of the chart. “Most important” means that these attributes have the greatest influence on the outcome. Attributes further down the tree (to the right of the chart) have
less of an effect. In this example, age is the single most important factor in predicting bike buying. The model
groups customers by age, and then shows the next more important attribute for each age group. For example, in the group of customers aged 34 to 40, the number of cars owned is the strongest predictor after age."
But, I got a different result from what mentioned in the tutorial. I got the number of cars owned as the most important attribute, then followed by the attribute age.
Do you guys know why?
Thanks in advanceHI,
BEGIN
INSERT INTO DT_CA_SETTINGS_TEST (SETTING_NAME, SETTING_VALUE) VALUES
(dbms_data_mining.TREE_TERM_MINPCT_NODE,to_char(1));
END;
That is not "Mode" its "NODE".
Now Execute.
Cheers.. -
Movies flash problem - Internet Explorer 11 (Windows 8.1 Preview)
Hi.
I've got a problem with a flash content in IE v. 11 on Windows 8.1 preview. I'm unable to watch any movies requires flash (ex. movies on starwars.com or the movie on the Adobe test page) neither on Metro mode nor desktop mode. Hope u'll help me find solution.
Regards,
Simon.
Edit: Ok, nvm. I found out what I have been doing wrong - I had got disabled shockwave add-on in IE options. Thanks anyway.Hi,
Besides that, please also try to reset your Internet Explorer to check if it helps:
1.Close all Internet Explorer windows that are currently open.
2.Open the desktop, and then tap or click the Internet Explorer icon on the taskbar. Changing your settings will affect both Internet Explorer and Internet Explorer for the desktop.
3.Tap or click the Tools button, and then tap or click Internet options.
4.Tap or Click the Advanced tab, and then tap or click Reset.
5.In the Reset Internet Explorer Settings dialog box, tap or click Reset.
6.When Internet Explorer finishes applying default settings, tap or click Close, and then tap or click OK. You'll need to restart your PC for these changes to take effect.
Karen Hu
TechNet Community Support -
Hello everyone,
The internet explorer is shutting down all the time , is any one know this problem ?
the notebook is N100
thanks
ErikHello everyone, The internet explorer is shutting down all the time , i get a message: passsword manager IE BROWSER HOOK OBJECT tvtpwm_ie_com.dll is any one know this problem ? it's happened when i write something fast. the notebook is N100 , win XP HOME EDITION , SP2 , IE7 thanks ERIK
Maybe you are looking for
-
DNS inconsistency when switching from corporate to external network
I have a problem I've been tracking for months, and just can't seem to figure out. I'm trying to access my corporate website, www.company.com (for instance). From inside of my corporate network, this resolves to an internal IP address, and works fine
-
What's with this "stay connected" pop up message?
Hi all, I just got a new G5 Intel iMac and have had great success transfering all of my setting and data from my old g4 iMac via the Migration Assistant and Target Disk Mode to the new machine. No problems at all. It was a breeze! However, now that t
-
Forms 6i against 11g database server - certification plan ? [ANSWERED]
Oracle folks, any plan to certify Forms 6i with a patchset against the upcoming version of the database server ? (before 6i ext. support ends end of Jan. 08) We ported our Forms 6i apps to 10gR2 already but we want to support the 6i version of the c/
-
hey ! i m an exchange student in the US for the year, so i have alot of pics ...i decided to buy the ipod 30go video to save my pics, because my host family's computer doesn t have a cd burner and my pics are on the computer. it s a windows 98 so my
-
Log and transform only transforms part of clips
Hey all, maybe someone else has this issue. Working with RED footage but this has also happened with Canon EOS footage: Log and transfer on some clips only captures or transcodes part of the clip even though no in or out points were selected. I can't