Accounting document should not generate.

Dear Experts,
There are certain Z reports in SD and FI in which we have value difference between SD and FI reports. One of the factors for this mismatch is due to adjusting exchange rate difference at FI level. For example, when a late realisation of payment, the difference amount due to exchange rate is directly updated in GL account entries
Since this doesnu2019t affect SD, we are getting mismatch in the values from SD reports and FI reports.
In order to eliminate this mismatch after it gets adjusted by FI, we want to issue credit/debit note for the value difference so that it will have an effect in SD reports, but we donu2019t want to affect the entries in GL accounts as it was already impacted directly.
Solution
We have crated a separate condition type ZABC and mapped with separate account key. This account key is Not Mapped with any GL account in VKOA. If above said case occurs to our client then he will maintain the price in ZABC condition type. Once the invoice is released the system is not generating accounting document but it say u201CAcc determination erroru201D.
Note: it is not generating the accounting document but the Posting status of the billing document is B.
Please suggest is there any other alternative way to address.
bala

Hiii
As per my understanding you want to impact only on SD side where as it is already impacted on FI side due to Exchange rate.
Now for comparing and reporting purpose you can use Proforma Invoice instead of Commercial invoice so system will not throw any error because no accounting entries will post and you can get report by clubing earlier invoice and proforma invoice.
Regards
Shambhu Sarkar

Similar Messages

  • Credit Memo - Accounting Document is not generating

    Hi,
    I have created a Credit Memo and removed billing block in VA02.
    Now, in VF01 i generated the billing document. But the Accounting Document is not generated.
    In VF02, when tried to do "Release to Accounts", it says " An Accounting document is not required for this Billing Document"
    When checked the Pricing conditions in billing, at Header level there is no Value. But in detail level there is value for all condition types.
    Also, during billing in VF01, when tried to check "Account Determination Analysisi - Reconcilliation Accounts", it says error message as "Accounting assignment analysis cannot be carried out for this Billing Type"
    Can you please help me out on this.
    Regards,
    Ramki

    Hi,
    Please check the reason for value not flowing to the header data of the billing document.Once you get the value of the document tin the header , there will be no issue in creating an accounting document.
    Check the item category of the credit memo.
    Regards,
    Phani Prasad

  • Why for P.O. Accounting document will not generate.

    Hi,
    In T.Code ME21N why Accounting Document will not generate,
    please give brief information,
    Thanks
    Samsunder

    Hi,
    In case of creating a P.O (purchase orde) no Accounting Document will be generated.Accounting entry will be generated At the PGI (post goods delivery , movement Type 601)
    The accounting entry will be
    cost of goods sold  Dr.
           to Inventry Account  Cr.
    With regards,
    Sudipto

  • Accounting Document was not generated

    Hi Friends,
    While doing Post goods issue, Material document was created but system does not create accounting document.
    One sales order having two items (10&20)
    Both iteams having same material
    In case of items number 10(system generate accounting document)
    In case of Item number 20(System does not generate accounting document)
    What could be the reason..
    Please help me....
    Thanks
    NPR

    Hi,
    Open the billing document number generated using t.code VF02 or VF03. Then from the menu bar choose Environment and choose Account determination analysis revenue account. From there you will see where the correction will be made.
    But possible reasons for the error are account 1. account assignment group is not tagged in sales area data in the customer master 2. account assignment group is not tagged in the material master.
    Try also releasing the document by clicking on release to accounting icon (green flag)
    Thanks.
    Rachelle

  • Accounting document is not generated-VF02

    Dear expert,
    I am facing error while releasing the Billing document from VF02 message is "Tax code "OZ" does not appear in any G/L account item " message number FF753
    the following config is maintain
    i) tax code is created at country level
    ii) tax related G/L is assign to OB40
    iii) tax procedure is assign to country
    Best regards
    satya

    Hi,
    Please check the GL code master data, if you are not mentioned in Tax category, system will through error, if you mentioned correct then
    go to VF02 enter billing document number and press enter, go to Environment-->Acc.determ. Analysis-->Revenue accounts. There you will find the Conditions which are mapped for the sales order, if any condition does not have GL mapping try to map and check.

  • Question about why accounting document had not been generated

    Hi :
    When I am doing goods movement 501 or 561 for material A,it had not generated the accounting document, I don't why I had checked obyc and this material, account tab had been maintained with correct valuation class,help.

    HI,
    are you doing the transaction wiht the Free Issue Material.  Some time clients gives material along with the Sales Order, in such casess accounting document will not generate.  Please check with the MM Team, there they have a option to for the Movement Types not to post Accounting Document.
    Regards

  • Billing Doc should NOT generate until you do PGI.....

    Hi,
    Please help me for the below Scenario:
    I have an Issue which is, Billing document should not generate until and unless you do PGI in Delivery.
    Can anyone tell me CONTROL PARAMETERS for this issue.
    Thanks in Advance.
    Raj

    Hi there,
    Standard SAP willnot allow invoice unless delivery is PGI'ed.
    Check the copy control routines in VTFL at header level. Check if the requirement assigned in copy control from LF to F2 is 011 Head.dlv-rel.w/o GI. If yes, change it. 011 will allow F2 to be created without PGI. Change it to 3 which is Header/dlv.-related & try it.
    Regards,
    Sivanand

  • Blocking Billing Doc.when the accounting document do not created

    Hi Dear all,
    Someone knows to tell me how can I block a Billing Document when the Accounting Document not generate? I tried to find some customizing, but I didn´t find it.
    I´m asking because sometimes the user don´t realize the "warning message"- No accounting document Generate. If I have some option to block this billing, will be perfect for my process.
    Thanks
    Melissa

    Hi ,
    Till accounting document is  not generated Billing will have status Open, I am not clear what do you mean by Blocking .
    In tablw VBRK , you can get data for billing document for which accounting document is not generated.
    Rajesh

  • The accounting document has not yet been created Message no. VF062

    hiii
    Iam getting error in VF02.
    Error is The accounting document has not yet been created
    Message no. VF062
    And where i can do it ?

    hi
    Go to VF02
    Open the billing document
    Enviornment -- Acc. determination analysis -- Revenue accounts and see why the accounting document is not generated
    Also, from VFX3 and select the document and release the same by clicking on FLAG and then to know the cause of
    Error
    TO know cause GOTO Tab --- NOTE and u will get the error cause
    let us know the cause then only we can be able to tell exact solution if possible.

  • Billing documents should not be created when it is not released to accounti

    Hi SD gurus,
    In some situation, billing documents are generated but it is not released to accounting which results in mismatch between FI value and SD value. We go to VFX3 and see the list of billing documents and take corrective action.
    Our requirement is that the billing document should not be generated when system is not releasing this billing document to accounting.
    Please suggest a solution for this.
    Regards,
    Senthil.

    Thanks giri.
    For the following reasons, the billing documents are not released to accounting.
    1. If the user wrongly chosen the billing type for the delivery.
    2. After creating condition type, it has to be assigned in COPA. If we forgot to do it, billing doc will not released.
    Our requirement is that if the billing document is not able create accounting document, the billing document itself should not be generated.
    Hope this will be suffice to understand my issue and suggest a suitable solution.
    Points will be rewarded.
    Regards,
    Kumar.

  • Cancellation document does not generate Accounting document

    Hi Experts,
        I am facing an issue that when a Billing document is getting cancelled through workflow ,the billing document does not generate a accounting document .I tried debugging the issue to check it but could not find the root cause of the issue.
    In the code we are using 'BAPI_BILLINGDOC_CANCEL1 to cancel the billing document.
        How to find that the accounting documents are getting  generated from the corresponding billing documents correctly.
    Thanks&Regards,
    Praveen

    First of all, are you able to create S1 type cancellation document after you call the BAPI? If you are not even able to generate the cancel document, perhaps you are missing committing the BAPI after calling it by using BAPT_TRANSACTION_COMMIT.
    Also are you able to create cancellation and accounting document by calling the BAPI through a test ABAP program? First check it out before using it in your workflow.

  • Materail document is not generating accounting documents

    friends,
    some materail documents are not generating fi documents, because of this materiel values are not matching with finance values,
    what could be the reason, all are capital items.
    regards,

    If the material is a not valuated material, then it might not generate accounting document. Compare this material with any other material with which you were able to generate financial documents.

  • Accounting documents are not posted for Excise invoice

    Hi,
    1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
    2. where we will maintain number ranges for excise invoice..?
    Thanks
    Rao..

    hi
    1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
    Not sure but can u try to relese this to accounting
    2. where we will maintain number ranges for excise invoice..?
    Excise invoice number range is depend on Excise series group.
    T-Code : SNRO
    Following is the No. Range Objects related to Excise, select the proper no. range object as per your requirement.
    J_1I57FC - 57FC Number Range
    J_1IARE1 - ARE1 Doc No object based on Series Group
    J_1IARE3 - ARE3 Doc No object based on Series Group
    J_1IBOND - Excise Bonding: Bond number object
    J_1ICERT - Withholding Tax Certificates (India)
    J_1ICHLNNO - Internal number range for challans
    J_1ICONPLA - Consolidated PLA serial no. generation
    J_1IDEPINV - Excise Invoice Number for Depot Invoices
    J_1IEXCEXP - Export excise invoice number range
    J_1IEXCINV - Excise invoice number
    J_1IEXCLOC - Local excise invoice numebr range
    J_1IEXCTST - Excise invoice with intervals
    J_1IEXINEX - Excise invoice number for export
    J_1IINTNUM - Internally document number to be generated
    J_1IINTPR2 - Despatch serial number
    J_1ILIC - Excise Bonding: License number object
    J_1IPLA2 - PLA part II number range object
    J_1IRG1 - RG1 Number range object
    J_1IRG1_T - No. Range for RG1 - Excise group / Material
    J_1IRG23A1 - RG23A part 1 no. range object
    J_1IRG23A2 - RG23A part II number range object
    J_1IRG23C1 - RG23C part I number range object
    J_1IRG23C2 - RG23C part II number range object
    J_1IRG23D - Folio Numbers for RG 23D
    Check the link
    Re: Excise Invoice Number Range
    excise invoice and domestic invoice sharing same number range

  • Accounting document created- not seen doc flow..

    Hi,
    i have an issue with respect to accounting document.  After saving the billing, accounting document is generated. When i see the document flow, Invoice is still open, accounting document is not seen in the flow.
    When i double check with customer open item, FBL5N, i am not getting the amount reflected there.
    When i try to release the blilling document, i am getting the below error.
    FI/CO interface: Balance in transaction currency
    Message no. RW022
    Diagnosis
    The balances in transaction currency must be zero for each logical transaction when transferring to the FI/CO interface. A balance of "                    0.02" "INR" was determined for the logical transaction "".
    System Response
    The FI/CO interface does not process any transactions which have a balance in transaction currency other than zero.
    Procedure
    This is a system error of the calling application.
    Kindly guide me.
    Thanks,
    Saravana Raja

    Dear Saravana Raja,
    Please search the forum before posting
    Please go through the following thread addressing the same issue.
    FI/CO interface: Balance in transaction currency
    Thanks & Regards,
    Hegal K Charles

  • Billing document should not be cancelled after creating return sales order

    Hi All,
    Billing document should not be cancelled after creating return sales order with reference to billing document. Please suggest configuration settings on the same.
    Sudheer.

    Hi,
    In SAP, when the sub-sequent document is existing , we can not cancel the preceeding document. Therefore if you want to cancel the billing document you need to calcel the documents which are created with reference to that.
    Check and confirm.
    Regards,
    Ravi Duggirala

Maybe you are looking for