ACCOUNTING IDOCUMENT CREATED FROM XI IN R/3 NOT CREATING GENERAL LEDGER

Hi,
When accounting document created through the message type ACC_DOCUMENT we are using basic type ACC_DOCUMENT01 for posting the document in inbound process accounting document gets created in r/3 side but without updating the New General ledger (FAGLFLEXA) but suprisingly it gets populated only in Classical Ledger..
1. What needs to be done on XI SIDE so that it starts posting Documents to NEW GENERAL LEDGER (FAGLFLEXA).
2. We also need to update the New General Ledger (FAGLFLEXA) Table for the postings made earlier.

Hi Pradeep,
to get a response to your post you will have to provide more detail for this scenario and explain clearly where it fails.
Regards
XI/PI SDN Moderator

Similar Messages

A JE created from the AP Invoice does not include the project # on all trx

A JE created from the AP Invoice does not
include the project # for the amounts entered in the freight box. To
duplicate, do the following:
1. Open an AP Invoice
2. Enter BP Code
3. Select Service type
4. Enter a Project Code in drop down box on Accounting tab
5. Enter a line in the Contents; specify GL Account, amount and Tax
Code Open Freight box
6. Enter an amount in one of the lines
7. Click ADD
8. Go back to the invoice and go to the Accounting tab Click on the GL
journal note and you can see that the line corresponding to the
contents line has a project, but the line corresponding to the Freight
box item does not.
My customer users these projects when printing GL agings and the
information is very important. Shouldn't this information be carried
forward on all transactions on the Journal entry? Is there a way to get this information to post?

Hi Pat,
the project code (PC) on the marketing document may only be applied to the business partner (BP), hence the only row in the associated journal entry (JE) with this project code is that of the BP.
You can link project codes to specific accounts (CoA -> select account -> account details -> project code) & this project code will then be assigned every time the account is found in a JE.
If you require the project code to be applied to the freight, you may assign this project code to the account you have defined for this freight. The drawback is naturally that the project code will then be pulled every time this freight is used, regardless of whether or not the PC is associated with the BP or not.
It is possible to manually assign project codes to every row in a journal entry, hence this should also be possible with SDK. You might explore the possibility whether it might be possible to automatically assign the BP PC to all rows in the JE using a script.
All the best,
Kerstin

Reservation created from a PM Order needs to create an automatic TR

Hello Experts !!
Needed your help much in a scenario where,
A reservation created from a PM Order needs to create an automatic Transfer Requirement (TR) in WM directly which can later be converted to TO.
(Please note that, I want to skip the GI part in IM with respect to reservation)
Kindly suggest if there is any standard configuration for the same.
Do batch jobs / user exit can only do it ??
Regards,
MC

If you don't want to wait until PM order confirmation, use batch program for MB26 to issue committed quantities.
Please note that MB26 will not handle serialized material issue.
Thanks,

How to creat commitment for PO PR but not creat statistical cost for GR

Hi,
Quantities and Values in Valuated Project Stock: Example - Material - SAP Library
Planning
Material FIN-M is assigned to network activity V10 and is managed in the project stock for WBS element P/4711.1.
The network type is flagged as appended and apportioned to the WBS.
Before the first MRP planning run or before the planned orders are converted into purchase requisitions or production orders, the following amounts appear in WBS element P/4711.1:
Planned costs of $500,00
Remaining order plan value of $300,00
The MRP controller begins by converting the planned orders. First, the planned order for the material RAW-M is converted into a purchase requisition and the planned order for the material SEMI-M is converted into production order A2.The order type is flagged as not appended and apportioned to the WBS.The remaining order plan value in the WBS element changes by the amount of the internal activities portion of production order A2 to $400,00 (300,00 + 100,00).After the purchase requisition is converted into a purchase order, a cost commitment of $50,00 also appears in WBS element P/4711.1.
External Procurement
Valuated goods are received for the purchase order, but the price is $10 different at $60. Assuming that material RAW-M is price-controlled, this gives rise to a debit posting of $60,00 in the stock account and credit posting of $60 in the GR/IR clearing account (Financial Accounting).If the inventory accounts was created as a cost element in CO, the following appear in WBS element P/4711.1:
Statistical actual costs of $60,00 in the stock cost element
A cost commitment of $0,00
If material RAW-M is price-controlled the standard price is $50,00, the postings in Financial Accounting are: $50,00 debit to a stock account $10,00 debit to a price difference $60,00 credit to the GR/IR clearing account
In this case, the only figure in the WBS element would be statistical actual costs of $50,00.
Above excerpt from SAP help, may I know how to do configuration to creat commitment for PO PR but not creat statistical cost for GR?
Thanks and regards,
Ray

Hello Jie,
if i right assuming your query then PR->PO= Commitment should be created.
but GRN by MIGO=Statistical cost should not create once MIGO if right then actual cost would be 0.
you can activate commitment by OKKP transaction.
And you want to cost should not be statistical after MIGO right?
here solution is cost never statistical type until account assignment object not statistical type this is my assumption.
if this is the issue then check G/L account from the PO. then check that G/L account, whether it is a B/S account or P&L account? I think you have wrongly assigned P&L account.
Regards,
Sanjeev

Need to create a sales order that does not create demand

Hi,
We need to create a no cost sales order - that does not create demand
In our current set-up when we try to create a no cost sales order with a material ( It Cat = Norm) we see demand being created in MD04
What configuration settings will allow us a deliverable order - that does not create demand (no MRP run?)
Thanks,
SM

Hello,
For this set of requirement i think the best option would be to configure a New Sales Order Type and a new Schedule Line Category. In VOV6, While you are defining a new Schedule line category in the transaction flow make sure to switch off the three check box.
Transfer of requirements / Begin assembly order from SD
Availability check for sales
Product allocation active
Then when we are assigning this newly defined Schedule line Category to Item category, make sure to leave the field of MRP Type as blank in VOV5.
Regards,
Sarthak

Export from 8i to 11g does not create object in default tablespace

Hello
I have exported and schema from oracle 8i and i try to import it in oracle 11g in a different architecture (8i is sparc. 11g is x86)
i have created an user with default tablespace and the original tablespace does not exist in this database, but I am getting the error;
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'TS_ARCCLAIMS_DAT' does not exist
if i create an indexfile and create all the objects by removing the REM from the indexfile i have countless contrains errors so i bet this is not an option.
this is how the user is created in 11g:
CREATE USER ARCCLAIMS
IDENTIFIED BY <password>
DEFAULT TABLESPACE ARCCLAIMS_DAT
TEMPORARY TABLESPACE GN_TMP
PROFILE DEFAULT
ACCOUNT UNLOCK;
-- 2 Roles for ARCCLAIMS
GRANT CONNECT TO ARCCLAIMS;
GRANT RESOURCE TO ARCCLAIMS;
ALTER USER ARCCLAIMS DEFAULT ROLE ALL;
-- 1 System Privilege for ARCCLAIMS
GRANT UNLIMITED TABLESPACE TO ARCCLAIMS;
-- 1 Tablespace Quota for ARCCLAIMS
ALTER USER ARCCLAIMS QUOTA UNLIMITED ON ARCCLAIMS_DAT;
what do i have to do in order to have the objects go to the default tablespace of the user?
thank you
Mario G,

Hello,
I believe that you are right, the tables seem to have a clob datatype..
here is it one of the tables affected:
IMP-00017: following statement failed with ORACLE error 959:
"CREATE TABLE "CLM_MAIL_INBOX" ("IBX_CODE" NUMBER(6, 0) NOT NULL DISABLE, "I"
"BX_CLM_CODE" NUMBER(10, 0), "IBX_IMP" CHAR(1), "IBX_FROM" VARCHAR2(50), "IB"
"X_SUBJECT" VARCHAR2(200), "IBX_CREATION" DATE, "IBX_ATTACH_TYPE" VARCHAR2(1"
"0), "IBX_ATTACH" BLOB, "IBX_CONTENT" VARCHAR2(1000), "IBX_RESP_STN" VARCHAR"
"2(3)) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 LOGGING STORAGE(INITIA"
"L 16384 FREELISTS 1 FREELIST GROUPS 1) TABLESPACE "TS_ARCCLAIMS_DAT" LOB (""
"IBX_ATTACH") STORE AS (TABLESPACE "TS_ARCCLAIMS_DAT" DISABLE STORAGE IN RO"
"W CHUNK 8192 PCTVERSION 10 NOCACHE STORAGE(INITIAL 24576 FREELISTS 1 FREEL"
"IST GROUPS 1))"
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'TS_ARCCLAIMS_DAT' does not exist
I have already reviewed the document 1180873.1
could the DEFERRED_SEGMENT_CREATION=false be enough..
could this be done with alter system or alter session? which one is better?
thank you

Production Order created from Planned order qty should not be changed

Dear PP Gurus,
IKindly give your valuable inputs on the below mentioned subject.
From MD04 planned order is converted to production order user should not be able to reduce the requirement quantity below Production Order quantity.
Thanks & regards,
Shanmugam Balamurugan

Hi,
This is common problem. to control this you need to develop an user exit . This exit will check the fixed lot size in material master and will compare with the quantity of production order. The exit will get fired at the time of order saving.
If any miss-match happens system will give an error message
Regards
Amit Parkhi

When trying to install firefox I get an error message from 7-zip saying"can not create temp folder archive"

I am unable to download firefox at all

See:
* https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding

Won't let me create a pdf - keeps flushing and not creating

How can i get program to create a PDF? Acrobat keeps saying:
%%[ ProductName: Distiller ]%%
Cambria not found, using Courier.
%%[Page: 1]%%
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%

The messages are fairly clear. Your content, now in PostScript form, is requesting a font, Cambria, a standard font delivered with all versions of Windows beginning with Windows Vista (but not with Windows XP). You have the joboptions you are using for Distiller set to cancel the creation of PDF if there are any missing fonts. Cambria is not being found by Distiller and therefore causes the job to abort. Alternatively, you can specify to either “warn” or ignore such missing fonts, in which case, the text formatted in Cambria would have appeared in the PDF file as Courier, something that I honestly don't think you really want.
You didn't indicate what application(s) you are using, but some applications simply ignore missing fonts in terms of display (typically substituting Arial or Times New Roman on the screen) but try to access the actual font for printing.
Your next step is to check your Fonts Control Panel and see whether Cambria is actually installed? If not, you need to somehow get the font installed either from a disk backup, your OS install disk, or if you moved it somewhere else on your system, reinstall it in the Fonts directory. Alternatively, you may reformat your content not to use Cambria.
- Dov

Create Home Now in WGM does not create home directory until...

We are using newest ver. of Leopard on our Xserve and have some issues with Workgroup Manager. We can create new users and specify the location of their HOME, however, when we try to Create Home Now and Save, the directory does not get created! No errors though, just silence and no action. Tried many times and no go.
UNTIL.... We log in with than new username directly into the server using Remote Desktop. Once logged in to Xserve as local user, the Home Directory magically appears.
What is happening?

Not sure what's happening - you can check the logs for clues.
You can also use createhomedir -a That will create home dirs for all users (and will not touch existing home dirs)
See here for more info
http://support.apple.com/kb/TA21050?viewlocale=en_US

Copy of Account Assignment Data from PR to PO in ECC 5.0

Hi,
In our ECC 5 instance, Account assignment data from PR to PO is not getting copied when we create a Purchase Order in ME21N transaction. Where as the same is being copied when PO is being created with ME21 transaction.
Ex: PR created with Acc Assignment Q, when we create PO with reference to PR in ME21N transaction, this account assignment data is not getting copied to PO. Where as this is no so, when we create PO in ME21 transaction.
Can you please specify any pointers for this copy control problem.
Thank you,
Regards,
Ramakrishna Mangena

hi,
please check for the following points:
1. check in ME21N, are referncing properly or not...
You have to reference it via using the document overview ON or directly entering the PR as source document for the PO...
2. check whether is getting properly saved in the table EBAN/EBKN...check it in SE16...you can check as per the document number...
3. If nothing is helping you from the above two points check with the ABAP and BASIS consultant...
Regards
Priyanka.P

Email from my domain is being sent which I do not create

Have recently started receiving "undeliverable" messages on emails which come from my domain but are not created by me. The email is from my domain but from a username which does not exist. The email is addressed to a username on my domain which also does not exist. This looks like a spammer is somehow sending messages from my domain. We are set up to prevent open relay. Any idea what I need to do to stop this or what it is?

Spammers can put whatever they want in the From header. There is nothing you can do about it, but that doesn’t mean they’re using your SMTP server or that your mail account is compromised in any way.

Sharepoint 2013 Workflow not available on Site created from Sharepoint 2013 Foundation Solution Template

If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction.   To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
Office/365) system and create a new site from the that template you get the same issue.
Anyone know a workaround/fix to this issue.   Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows.   A solution that involves Visual Studio import would work fine
for me.
Earllibby

Apparently you did not read my question very carefully.   The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.
BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
Earllibby

Accounting No not Created For Sales Orders when Processed thru Credit cards

Hi Experts,
I was able to successfully post FI document through Billing document in SD.
The Problem is encountered when a Sales Order is created
for Credit Card customers.
When the sales order is created the credit card information we are prompted with an error message Payment terms is a required field for G/L Acc so and so...
The payment terms field in the posting key 01 is marked required and the same field for the reconcilation account is optional. However this config has not created any problem for the Non credit card sales orders.
If any one has faced the same problem. Please help me out in this issue.
Thanks,
Chaitanya

Hi Friends,
Please refer SAP OSS Note 119047.
In the OSS Note they have mentioned..
Pass the payment terms to the field
xaccit-zterm = '0001'. in the User Exit.
Program : LV60BF0C,
Customer Function '002'.
Include File ZXVVFU02.
SE 37:- EXIT_SAPLV60B_002
Still I don't understand why SAP doesn't support payment terms for Credit Card. But when a Sales Order is created without credit card the field xaccit-zterm has a value.
Thanks,
Chaitanya K

Adobe Acrobat Pro XI problems printing PDFs created from AutoCAD.

Just installed Adobe Acrobat Pro XI and am having problems printing PDFs created from AutoCAD. Printing other PDF created by MS Word works well. Had a similar problem in an earlier version of Pro. The fix I figure out then was to print the PDF file as another PDF. Using the second PDF to print to a plotter typically worked. It does not work for Adoabe Acrobat Pro XI.

Hi presottom
Please refer ; http://helpx.adobe.com/acrobat/kb/troubleshoot-pdf-printing-acrobat-reader.html
or
Let us know more details about it to help you better ?
What is the OS ?
is there any error message , etc .. ?

ACCOUNTING IDOCUMENT CREATED FROM XI IN R/3 NOT CREATING GENERAL LEDGER

Similar Messages

Maybe you are looking for