Accounts payable using ADI

Hi everyone,
i recently read that it is possible to create accounts payable from ADI.
i knew that it was possible for creating assets, journal entries and budgets.
i think if this really works this would alleviate the burden of entering invoices
directly to oracle AP since the same invoices may be already available in the form of a spreadsheet.
this will mean time savings and the lesser the probability to make errors to the wrong supplier with the wrong amounts.
could someone tell me how to make the above a reality as tried but found nothing.
thanks

No. ADI is available for GL and FA. You can use a tool called SQLXL to connect from excel spreadsheet to "Oracle AP Open Interface Tables" and run payables open interface program to create invoices. If you are an expert in excel macros, this is feasible.

Similar Messages

AP Invoice Aging Report by GL Date (using: Accounts Payable Trial Balance)

Hi
Need some suggestions:
I need to develop a custom report in (R12).
Account Payable Trial Balance Report, does have the capability to run as of a particular date but it does not show aging buckets. This custom report is to be developed to meet the requirements from a Payables detail perspective as well as to reconcile.
The report should show the balance due as of the report date selected. If As of Date = 5/31/11, then when the report is run on 6/15/11, it gives the results as it existed on 5/31/11. If we run it again on 8/31/11 for As of Date = 5/31/11, and again on 1/13/12, we get the EXACT SAME results each and every time except for the following fields: Current Status, Date Paid and Payment Reference Number.
The end result should be this report ties to the penny to Oracle GL as of the date selected EXCEPT for any JEs posted to the account.
Thanks
Pravin

Hi Pravin,
For all transactions in Oracle, you will have GL dates (Accounting Dates) associated to it. If you use this date in your query to filter data, then you will get correct aging data as on a given date.
To tally with GL, you also must check if the selected transaction has been accounted?
Raajkumar G

Using Attachments in Accounts Payable

Requesting your opinion on using "attachments"
Do you use the attachments feature in the Accounts Payable module? We are trying to create a Pro/Con list of using this function and would like to get the input from other Oracle users.
Thanks
Pam

I assume you are talking about invoices as attachments.
We use AP attachments to store scanned copies of invoices.
Depending on your volume, you may want to store them on a different server (with inexpensive / slow disks) and simply put a url as an attachment. This way, you are not tying up the EBS disk-space. It also means that your cloning / backup process does not get slower as you attach more scanned copies.
The other option is 3rd party tool such as open-text. That does a lot more than just storing scans. It automates the data-entry of the invoices too.
Hope this helps,
Sandeep Gandhi

Creating "Payables Account Transaction" using custom code

Hi Gurus,
I need a help. I have a requirement that I have to create "Payables Account Transaction" using custom PL/SQL code. Kindly could you advise me as to which API or Package should i use to get this done. Currently I am in 11.5.10.2.
Pls help me on this.
Thanks,
Genoo

Hi Genoo,
As mentioned I would reverse the standard journals coming from Payables, that way you can still see what the original journals were and drill back using them. So you don't do anything in the subledger.
Alternatively if you wanted to get more risky, when you run the Payables transfer to GL, you could choose not to submit journal import and then you could manipulate the AP Journal records while they are still in the GL_INTERFACE (as they also go through that table) prior to going to GL, then you could do whatever you want - and if you don't delete them (but update / copy them) they will still retain the drilldown links back to AP.
Regards,
Gareth

Manual journal entries created in Ap did not see in Accounts Payable Trial

Hi Experts,
Report Accounts Payables Trial Balance, with parameter Include SLA/Manuals/Other Sources Flag set to Yes, does not show manual journal entries.
These Manual journals entries are created in AP
Navigation: Payables -->Accounting --> Subledger accounting --> Journal Entries.
Ofter creating the journal entries i ran Accounts Payable Trial Balance, when i go through the output i did not see the Manual journal entries which are created in AP.
Please help me it is very urgent.
Regards,
Raju.

Pl check your 'Report Defintion' once to ensure that liability accounts that you are using in manual entries are included in report definition.
Regards,
Tarun

Fully Paid invoice is appearing in "Accounts payable trial balance"

Hi all,
i have proble with AP trial balance report..
there is one invoice which is fully paid and accounted.
but still that invoice is appearing in trial balance report.
invoice amount is 0000000
rmaing amount is (9856568) note: negatinve amoun..
any one pls suggest as soon as possible
thanx

hi Octopus Rex ,
rite.
But i have one doubt tht.i have invoice which is paid.but it is still in "AP_LIABILITY_BALNCE" as you mentined **"The Accounts Payable Trial Balance report uses this information to report on outstanding invoice liability"**.But i have only single line for that paid invoice.
the table "AP_LIABILITY_BALANCE" sholud have the oustanding amount only rite.why i am getting this paid invoice.
can u give some point to releated paid invoce that will appear in this table

Accounts Payable and PO Accrual Reconciliation Summary Report?

Dear all,
We are using R12.1.3 and doing the reconciliation AP Vs PO Accrual. However, I run the report "Accounts Payable and PO Accrual Reconciliation Summary Report" and found that one record is strange, like the PO Accrual balance is something -10,000 and the Account Payable balanced is 0.00.
What does it mean for my case? Please advice.
Thanks in advance.

Dear all,
I rerun " Accrual Reconciliation Load Run" program with data range. After that I re-run "Accounts Payable and PO Accrual Reconciliation Summary Report" and found that everything is fine now.
I just wondering am I need to run "Accrual Reconciliation Load Run" every month end closing or just run once for up-grade POs?
Please advice.
Thanks.

Accounts payable workbench

Dear Experts,
Please can any body explain about SAP Accounts Payable Workbench and when it is used...Please share any material for this....
Regards
Santosh

The SAP accounts payable workbench allows you to manage your electronic invoicing (e-invoice) processes in one central area.
All electronic documents which don’t match automatically against the Purchase Order, are blocked due to price / quantity differences or that need to be coded will be visible within the user-friendly Workbench. It shows at a glance the status of the document and what actions have been taken or are required to progress through the posting cycle. The journey of any document sent around the business is fully documented and can be reviewed within the AP Workbench, giving visibility throughout the business for the AP department.

Purchasing and/or Account Payable

I am interested in knowing if anyone has built a purchasing or accounts
payable solution using FORTE. If anyone has done this in the please reply..
Thanks,
Kevin McGaffey
Caro Systems Inc.
66 Allayden Drive
Whitby, Ontario
L1P 1L5
[email protected]
(905)430-2445
See Caro on the Web www.carosys.com
__________________________________________

I maybe getting confused about your requirement but I interpret it as you need the value for source account FCGB.123456 to be posted to two different target accounts P10000 and F10000 with the F10000 posting being sent to the fodder member in C1. Create a logic account that catches FGCB.123456 and give it a unique name i.e. L_FGCB.123456. Then just map that account to F10000 and fodder.
If its just as case of the source account FGCB.123456 reequiring mapping to a different account than all the other accounts in your LIKE mapping then just map that account explicitly.

G/L account determination - purchasing tab - accounts payable window

Dear users,
Can any one help me by defining what is "assets account" in accounts payable window in purchasing tab of G/L account determination ?
It shows liability control accounts while the account type is mentioned "Asset accounts" I am confused in this.
Thanks and regards,
Farhan Sufi

Farhan
Ignore the verbage. The accounts you need to select on Accounts Payable accounts from the Liability drawer. Please check Control Account on the AP GL account you want to use.
Suda

Creating a Vendor and Accounts Payable Invoice

Hello Everyone,
At the moment we are using transaction FK01 or XK01 to create a Vendor on the SAP system. We want the process of "Creating a Vendor" and "Creating Accounts Payable Invoice" to be available on Portal which allows us to automate some part of our business process.
Could anyone suggest me a proper approach for this requirements. I would appreciate your help. It is a bit urg*nt.
Regards,
PG.

I would check in SE37 to see if there is any other BAPIs. Alternatively you could debug the transaction in R/3 to see which function modules it uses. It's possible that there is no BAPI, but there is a non RFC function module for creating a vendor. In that case, you can create a "wrapper" for it, ie your own function module that is rfc enabled and that simpley forwards the call internally to the function module that creates the vendor.
I would also search the ABAP forums to find out if there are any function modules that provide this operation. If you don't find any threads you can try posting a question. It's best to post questions concerning BAPIs and function modules in the ABAP forums (or related forums).
Failing all this or if none of the above fits your requirements, you could create your own BAPI to perform this operation. But 9/10 there is a standard function module to perform most operations. Don't worry if it's not rfc enabled like a BAPI, just create a wrapper around it.
Cheers,
Dion

SAP Tables for FI Accounts Payable

Hello gurus,
Does anyone know what are the SAP Tables for FI Accounts Payable and what TCodes to display these A/P tables?
Thanks in advance.
Best regards,
Gab

And use transaction code SE16 to view the tables mentioned by Jan. And to add check BSAK for cleared items.
Elias
Edited by: Elias Akorli on Dec 11, 2009 4:01 PM
Edited by: Elias Akorli on Dec 11, 2009 4:02 PM

R12(Payments)--Accounts Payable Trial Balance Report, Need Info.

Hi All,
We are trying to use the report Accounts Payable Trial Balance Report.
This is an XML Report in R12 now and has 4 different RTF Templates.
Can you please explain me how this report can be used in R12 and how does it selects the RTF template( from 4 different templates present) at run time.?
Thanks,

Hi,
In 11i we use to have a parameter to give the report in Summary or Detail
In R12 we have 4 options in templates to have Summary by Account, Summary by Supplier, Detail by Account and Detail by Supplier.
Report will not select the template automatically. The user needs to select the template before submitting the report.
Hope it helps
Regards,
Sridhar

Possibility of AP and contracts accounts payable payments running parallel

Hi Gurus,
My client already has a SAP system and they are planning to implement FICA for contract accounting. Is it possible to have contracts accounts payable and accounts payable systems running in parallel for the payments. Please let me know the solution soon.
Thanks
Santosh

1. Take List of all applied Invoices of the Payment
2. Check the status of those invoices. Each one of them should be in status 'Accounted'
3. If not,Identify the problem with the Invoice and Clear that. The problem may be Invoice adjustment(adj to Paid invoices allowed).
4. Try running Create Accounting again.
5. If the problem persists still, it conveys us that the Transactions were struck in loop and can be resolved only by using UPDATE command.
6. Contact Oracle for Data fix
Regards,
Sridhar

Accounts payable: Reconciliation field(s)

Dear all,
I have posted the same thread in the Materials Management forum as I am not sure where it belongs. As I am not very familiar with vendor payments, I hope you can help me with this question.
As per our accounts payable department, when they send a check to a vendor, they need to reference the payment with the bill of lading number.
But the bill of lading is not available in the payments standard transaction: F110. So I was wondering: which field(s) (which are printed on the check) are usually used by vendors for payments reconcialiation?
Thanks,
Annabelle

Hi Annabelle,
When you enter an invoice with reference to a purchase order, the system suggests data from the purchase order and the goods receipts against the PO (for example, vendor, material, quantity still to be invoiced, expected amount per item, and terms of payment). You can overwrite these default values if the invoice actually submitted by the vendor contains other values. The system checks whether your input is allowed. In doing so, it may issue warning or error messages.
You can also assign the invoice items to a purchase order using the number of the delivery note or bill of lading, provided that these numbers were entered at the time of goods receipt.
With Regards
Srinivas

Accounts payable using ADI

Similar Messages

Maybe you are looking for