ACE - SNMP OBJECT not-accesible

Hello,
I'm trying to monitor certain SNMP Objects from the CISCO-SLB-MIB but I'm getting a permission "not-accesible" from the NMS. Does anybody know what could be the problem?
Many thanks for your support.

An example of this is the object "slbServerFarmName" wich is "not-accesible" from the MIB definition. Then, what can i do to get this value from the ACE to my NMS??

Similar Messages

How to reboot Nexi using SNMP (tsMsgSend not supported)

How does one reboot Nexus using SNMP?'
Normally, I reboot IOS gear using:
snmpset -c {private} {switch|router|whatever} tsMsgSend.0 i 2
               tsMsgSend OBJECT-TYPE
                   SYNTAX INTEGER {
                        nothing(1),
                        reload(2),
                        messagedone(3),
                        abort(4)
                   ACCESS read-write
                   STATUS mandatory
                   DESCRIPTION
                           "Sends the message. The value determines what
                           to do after the message has completed."
                   ::= { lts 9 }
But our new Nexi (5000 and 7500) don't support tsMsgSend in various ways:
N5K
Reason: notWritable (That object does not support modification)
Failed object: OLD-CISCO-TS-MIB::tsMsgSend.0
N7K
Reason: wrongValue (The set value is illegal or unsupported in some way)
Failed object: OLD-CISCO-TS-MIB::tsMsgSend.0
Yes, I have the following in the Nexi config files:
snmp-server system-shutdown
How does one reboot a Nexus using SNMP?
--sk
Stuart Kendrick
FHCRC

Hi,
The only way that a device can be reloaded using SNMP is with the SNMP object tsMsgSend
(1.3.6.1.4.1.9.2.9.9).
As per the official Nexus MIB support list, the OID is not supported in NX-OS
Thanks-
Afroz
[Do rate the useful posts]

ODI not able to detect primary/foreign keys from XML- user lacks privilege or object not found

Hi Guys,
Im trying to load an xml file with two entities address and employee as below. The topology reverse engineering everything works fine. Im even able to view the xml data in ODI, but when i try to load the data from these two entities joining by the schema primary keys and foreign keys which odi created on reverse engineering process for xml, im getting the below error. Im able to load data from one entity, error only occurs when i use the join odi creates internally to identify the xml components employee and address
XML File:
<?xml version="1.0" encoding="UTF-8" ?>
<EMP>
<Empsch>
<Employee>
<EmployeeID>12345</EmployeeID>
<Initials>t</Initials>
<LastName>john</LastName>
<FirstName>doe</FirstName>
</Employee>
<Address>
<WorkPhone>12345</WorkPhone>
<WorkAddress>Test 234</WorkAddress>
</Address>
</Empsch>
</EMP>
Topology: jdbc:snps:xml?f=C:/Temp/RR/Empsch.xml&s=Empsch&re=EMP&dod=true&nobu=false
Error Message:
-5501 : 42501 : java.sql.SQLException: user lacks privilege or object not found: EMPSCH.EMPSCHPK
java.sql.SQLException: user lacks privilege or object not found: EMPSCH.EMPSCHPK
    at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
    at org.hsqldb.jdbc.JDBCPreparedStatement.<init>(Unknown Source)
    at org.hsqldb.jdbc.JDBCConnection.prepareStatement(Unknown Source)
    at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.prepareStatement(SnpsXmlConnection.java:1232)
    at sun.reflect.GeneratedMethodAccessor65.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$OnDisconnectCommandExecutionHandler.invoke(OnConnectOnDisconnectDataSourceAdapter.java:200)
    at $Proxy2.prepareStatement(Unknown Source)
    at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:83)
    at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)
    at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:111)
    at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:81)
    at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:1)
    at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:70)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
    at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
    at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
    at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
    at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
    at java.lang.Thread.run(Thread.java:662)
Caused by: org.hsqldb.HsqlException: user lacks privilege or object not found: EMPSCH.EMPSCHPK
    at org.hsqldb.error.Error.error(Unknown Source)
    at org.hsqldb.ExpressionColumn.checkColumnsResolved(Unknown Source)
    at org.hsqldb.QueryExpression.resolve(Unknown Source)
    at org.hsqldb.ParserDQL.compileCursorSpecification(Unknown Source)
    at org.hsqldb.ParserCommand.compilePart(Unknown Source)
    at org.hsqldb.ParserCommand.compileStatement(Unknown Source)
    at org.hsqldb.Session.compileStatement(Unknown Source)
    at org.hsqldb.StatementManager.compile(Unknown Source)
    at org.hsqldb.Session.execute(Unknown Source)
    ... 27 more
Please advice
Thanks
Revanth

Thats obvious from the xml file contents you have given here. In this xml file You have four complex type. Two of them are employee and address. However the employee doesnot have any relation with address as you have not added the relationship. Thats why its failing. Its not the fault of ODI.
Also I would suggest not to use auto generated dtd by ODI as you might face problem in future. For example the address type of XML has 8 attributes and 4 of them are not mandatory. That means each of your xml file may have attributes between 4 to 8. This is where ODI auto generated DTD fails.
XML Schema complexType Element
Thanks
Bhabani

ManagedAccounts.aspx Object not reference to object

SETUP: 2x SharePoint 2010 Servers (14.0.5130.5002); 1x SQL 2008 R2
I setup alot of managed accounts (about 10) and had them setup to automatically generate the new passwords. After doing this operation, i can no longer access the managedaccounts.aspx page. I get object not referenced to object. I read
a bunch of forums that said the farm account shouldn't be set to autogenerate passwords and it will cause the error. Next, what i did is setup a new AD account with static password and made it the farm account. I then deleted the old farm account
using powershell. However, even after doing this, i am still getting the same error. Any ideas? (everything else is working in the farm as far as i can tell.
04/12/2011 10:38:06.44 w3wp.exe (0x197C)                       0x1FB0 SharePoint Foundation
Runtime                       tkau Unexpected System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.ApplicationPages.ManagedAccountsDataSourceView.FillDataTable(DataTable table, DataSourceSelectArguments selectArguments)     at Microsoft.SharePoint.WebControls.DataTableDataSourceView.Select(DataSourceSelectArguments
selectArguments)     at Microsoft.SharePoint.WebControls.AdministrationDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)     at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments,
DataSourceViewSelectCallback callback)     at System.Web.UI.WebControls.DataBoundControl.PerformSelect()     at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()     at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildContro...
04/12/2011 10:38:06.44* w3wp.exe (0x197C)                       0x1FB0 SharePoint Foundation
Runtime                       tkau Unexpected ...ls()     at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()     at System.Web.UI.Control.PreRenderRecursiveInternal()     at System.Web.UI.Control.PreRenderRecursiveInternal()     at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()     at System.Web.UI.Control.PreRenderRecursiveInternal()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) a5dbe0de-bab0-48cc-9d99-9c094490a1f1

Here is another thread about this:
http://social.msdn.microsoft.com/Forums/en-US/sharepoint2010setup/thread/406f1817-d687-49d7-9691-26e487fb5577
However, none of suggestions worked for me. i can't reinstall our staging farm cause we are in the middle of a migration. I am probbably going to open a case with MS as it doesn't seem like anyone has any idea about the problem.

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.

This thread is pretty old, are you still having this issue?

While Doing BW Role Uploading Getting message "Linked Objects Not Found" ?

Dear All,
I am trying to upload a BW role from EP , while doing role upoad activity, when I am giving role name, system namein the first step it is identifying the role from the system.
To that role four reports has been attached.
After uploading the role, the role has been get uploaded, but the reports which are attached to the role it is showing that "Linked Objects Not Found", for all the reports.
For all those reports I have checked the web url on BW server it is corect but then also I am getting above message.
Please any one help me out in this scenario.
Regards,
Aditya

The same problem during XI to BI integration as it was told in how-to.

While posting T.code VL02N "co object not found " what have to do

Hi
Friends..
while posting T.code VL02N "co object not found " what have to do
General Ledger related to Co object what i want todo.
showing error " Co Object not found"
Thank you.
Ashok kumar

Hi
Assign a cost centre to the cost element of the general ledger account specified.
Transaction KA02
another option is got OKB9 and assign cost center to GL account at company code level.
regards
Srinivas

BACKGROUND PROCESSING, REPORT NOT LOADING, "OBJECT NOT SET TO INSTANCE..."

Post Author: thecoffeemachine
CA Forum: .NET
I already posted this message in other Web sites, but I am almost getting crazy here and I need help:
HI:
The Web application I am testing was having several issues related to loading Crystal Reports. It was fixed and I do not know which of the 1000 things I did to fix it; but now it began, again, to have the same behavior after I had a conflict with another Web site that was in the same server.
The thing is that I had another virtual directory where resided a copy of the same Web app. for testing purposes/working with the Visual Studio. The reports were loading all fine, very fast, all perfect... And suddenly the assemblies of one Web site and the other began to "blend" together and..... well the same behaviors appeared again. I tried to copy the last stable backup and rebuild the Web app... but it did not work.
At the very first time that one requests the report, it shows without problem. At the second time it shows an error message related to "cannot submit to background processing", and sometimes "object not set to an instance.." ... and on the third time it just never shows up and the app. becomes unresponsive. I have to close the window and request the Web site again in another browser window. If I wish to see the report again I have to wait for hours until it shows it.
I am using Visual Studio 2003 and the Crystal Report version that was shipped with that Visual Studio version. I am working with Windows Server 2003 and SQL Server 2000. Below is the VB code:
    Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load             Me.SqlConnection1.Open()
       Me.SqlSelectCommand1.Parameters("@CourseCode").Value = Request.QueryString("CD")         Me.SqlSelectCommandReferences.Parameters("@CourseCode").Value = Request.QueryString("CD")         Me.SqlSelectCommandTextbook.Parameters("@CourseCode").Value = Request.QueryString("CD")         Me.SqlSelectCommandObjectives.Parameters("@CourseCode").Value = Request.QueryString("CD")         Me.SqlSelectCommandTopicData.Parameters("@CourseCode").Value = Request.QueryString("CD") Me.SqlSelectCommandCourseOutcomes.Parameters("@CourseCode").Value = Request.QueryString("CD")
        Me.SqlDataAdapterMainData.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseSyllabusData")         Me.SqlDataAdapterReferences.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseReferenceData")         Me.SqlDataAdapterTextBook.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseTextbookData")         Me.SqlDataAdapterObjectives.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseObjectivesData")         Me.SqlDataAdapterTopicData.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseTopicData")
Me.SqlDataAdapterCourseOutcomes.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseOutcomes")
        Dim myExportOptions As CrystalDecisions.Shared.ExportOptions         Dim myDiskFileOptions As CrystalDecisions.Shared.DiskFileDestinationOptions         Dim myExportFile As String         Dim myReport As New ABETFormat         myReport.SetDataSource(Me.DtsSyllabusCompleteData1)
        myExportFile = "C:UNTempPDF" & Session.SessionID.ToString & ".pdf"         myDiskFileOptions = New CrystalDecisions.Shared.DiskFileDestinationOptions         myDiskFileOptions.DiskFileName = myExportFile         myExportOptions = myReport.ExportOptions
        With myExportOptions             .DestinationOptions = myDiskFileOptions             .ExportDestinationType = .ExportDestinationType.DiskFile             .ExportFormatType = .ExportFormatType.PortableDocFormat         End With
        myReport.Export()
        Response.ClearContent()         Response.ClearHeaders()         Response.ContentType = "application/pdf"
        Response.WriteFile(myExportFile)         Response.Flush()         Response.Close()         System.IO.File.Delete(myExportFile)         Me.SqlConnection1.Close()
    End Sub
I already have tried moving the Crystal Reports dll´s to the bin directory. ..... I have tried calling the Garbage Collector at page unload...I also have checked, inside the report, that the database is "up to date"... ... recycling the worker process of the IIS... etc...
I see that, in debbuging mode inside the Visual Studio, when the page loads the debbuging window shows a message notifying that the symbols related to the Crystal Reports dll's could not be loaded.
Should I need to modify the default properties of the database? I checked "database is case insensitive", "use indexes or server for speed".. I have tried checking and unchecking the box "performing grouping on server"
Oh by the way, my report has about 4 subreports in it. Each report loaded shows 1 or 2 pages.
ANY HELP WILL BE EXTREMELY APPRECIATED....
MMS

See [Crystal Reports For Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23&overridelayout=true] article, page 107 and on for details on how to use Crystal reports in session.
Ludek

Object not found in store error when trying to load MimeContent of an email (containing attachments)

This is a weird one and I'm hoping someone can reproduce this and give me some help.
We have a system that uses the EWS Managed API to send emails. Optionally an email may need to be saved out as an rfc822 (.eml) file afterwards for storing in our own database. In order to save to a file I need to load up the MimeContent of the message.
And this is where an "Object not found in store" exception can get thrown.
The really strange part is that the exception only seems to occur if the email contains an attachment and if there is too much of a delay between sending the email and trying to access the MimeContent!
My test code is something like:
// Set up the basics
_item = new EmailMessage(P7ExchangeService.Service);
_item.Subject ="Hello world";
_item.ToRecipients.Add("some name", "[email protected]");
_item.Body = new MessageBody(BodyType.HTML, @"<html><head></head><body>hello world<image src=""cid:blah""/></body></html>");
// Add attachment
FileAttachment att = _item.Attachments.AddFileAttachment("blah", "c:\temp\blah.jpg");
att.IsInline = true;
att.ContentId = "blah";
// Send and save
_item.SendAndSaveCopy();
// Wait a bit (see comments below)
Thread.Sleep(5000);
// Now try and save out
var propCollection = _item.GetLoadedPropertyDefinitions();
propCollection.Add(ItemSchema.MimeContent);
_item.Load(new PropertySet(propCollection)); // EXCEPTION!
// ... etc
On some systems it seems that the sending can take a while, hence my Thread.Sleep() call to simulate this.
Its when I try and load up the MimeContent that I will then get the exception. But ONLY if I sleep (simulating the occasional delay seen on customer sites) and ONLY if the email contains an attachment.
The mimecontent is necessary in order to save out to a file (by accessing the _item.MimeContetn property).
Can someone please explain the exception and/or provide a better way of doing this??

This is normal EWS doesn't return the Id of the Item in the SentItems Folder so you need to use a workaround like
http://blogs.msdn.com/b/exchangedev/archive/2010/02/25/determining-the-id-of-a-sent-message-by-using-extended-properties-with-the-ews-managed-api.aspx .
If you want to understand the issue you can enable tracing and look at responses, the actually Id your trying to load the MimeContent from is probably the Id of the draft message. Eg to send a message via EWS with attachments multiple operations must be
used to construct it and when the messages finally gets sent the copy in the drafts folder is deleted and a copy is created in the SentItems folder. However the Id isn't returned for the SentItems copy hence you need the workaround.
Cheers
Glen

PI 7.0 JMS Rcv Adapter: Object not found in lookup of XIJMSService

Hi all,
When sending messages to an JMS queue, JNDI setup, in the Message Monitoring we get the error:
"MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of XIJMSService.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of XIJMSService."
The Error points to the Module Processor. Indeed the 2 default Modules are used:
- SAP XI JMS Adapter/ConvertMessageToBinary
- SAP XI JMS Adapter/SendBinarytoXIJMSService
This second Module contains 'XIJMSService', and according the documentation (http://help.sap.com/saphelp_nw04/Helpdata/EN/4d/a3bc97ff55c742af7faed661635baf/content.htm)
, it uses a parameter named 'modulePoolAdminLookupName' with the default value: /XIJMSService.
This is how far we get. Even when we assign a different value to the parameter 'modulePoolAdminLookupName' , the error in the Message Monitoring stays the same.
Has anyone experience with this issue, or any ideas to investigate or solve this?
Thanx in advance, Walter.

Hi all,
Issue is solved. Apparently the Java-version on our XI-server (1.4.2) could not handle the Vendor's JMS-driver we installed (ActiveMQ 4.1.2.jar) so we tried using the ActiveMQ 4.1.0.jar as the JMS-driver. Now it is OK and message are put on the destination queue.
Walter.

How to make the fields of BPM object not saved in database.

Is it possible to declare some attributes of BPM object not saved in database.
For example: Order has attribute orderId and date, user (other attributes)... we only want OBPM save orderId. We want the other attributes could be saved and retrieved by external DAO classes.
We still want to use the OOTB presentation from BPM object (not the customer jsp).
Thanks

When you say:
Is it possible to declare some attributes of BPM object not saved in database.do you mean you do not want the information stored in the Oracle BPM Engine's database?
If this is the case, create a BPM Object with just two attributes. One would store your orderId as a primitive data type. The other attribute would be a BPM Object that would store all the other data you are going to retrieve from the external database.
At the beginning of the screenflow, read the database using the orderId attribute and populate the other attribute (the BPM Object). At the end of the screenflow just before it flows to the end activity, you could set the second attribute (again, the BPM Object attribute) to null. This would keep the BPM object with the two attributes from storing anything but the orderId in the Engine's database table for the work item instance.
Dan

File - RFC - File without BPM --- Object not found in ResponseOneWayBean

I am using PI 7.1, and facing the following error in File - RFC - File without BPM
"Error: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of ResponseOneWayBean."
I am using 1 sender CC for File ( CC_LOTUSNOTES_CHALET_SND)
                  1 receiver CC for File( CC_LOTUSNOTES_CHALET_RCV_FILE)
                 1 receiver CC for RFC (CC_LOTUSNOTES_CHALET_RCV_RFC)
in the sender CC I have given Module parameter as:
Processing sequene
CallSapAdapter    Local Enterprise Bean 2
AF_Modules/ResponseOneWayBean Local Enterprise Bean 3
AF_Modules/RequestResponseBean Local Enterprise Bean 1
Module configuration:
1     passThrough          true
3    receiverChannel      CC_LOTUSNOTES_CHALET_RCV_FILE
3    receiverService       Bus_File
pls let me know where i am wrong

Hi
i am facing following error:
2009-12-03 09:08:17       Information        The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
2009-12-03 09:08:17       Information       MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
2009-12-03 09:08:17      Error                 MP: exception caught with cause java.lang.NullPointerException
2009-12-03 09:08:17      Error                 File processing failed with java.lang.NullPointerException

Error in AS2 adapter. Object not found in lookup of as2.. Its urgent..!!

Hi AS2 experts,
*When i tried sending an xml to partner system using AS2 adapter.. Mapping is succesfull and message is failing in receiver AS2 adapter.
1. I used the following parameters in AS2 Module.
ModuleName                                                       Module Key
localejbs/Seeburger/solution/as2                              solutionid
localejbs/ModuleProcessorExitBean                          exit
ModuleKey    ParameterName         ParameterValue
exit                JNDIName     deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
Iam getting the following error.
Success     MP: Processing local module localejbs/Seeburger/solution/as2
Error :   MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2.
Error : Exception caught by adapter framework: Object not found in lookup of as2.
Error : Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of as2.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2..
2. When i tried by removing Modulename "localejbs/Seeburger/solution/as2"
It is showing the below error like AS2ID is missing.. but its there in party configuration.
Error :
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing..
Can anyone has idea what might be wrong.
Kindly suggest me asap.
Thank You.
Regards
Seema.

Hi,
Plesae go through below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
and
Check with below configuration
Configuration for AS2 or simple file adapter.
We are using this module configuration for converting EDI D96A format to XML:
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
bic destSourceMsg MainDocument
bic destTargetMsg MainDocument
bic logAttID ConverterLog
bic mappingName See_E2X_ORDERS_UN_D96A
bic saveSourceMsg ORIGINAL_EDI
can someone please tell me the module configuration for reverse mapping at receiver end,i.e.,XML to EDI D96A
basically,I need mapping name for this.
Scheme=AS2ID
Name = WAN network no of the partner who is sending the file
Sender AS2 adapter configuration:
Few changes in the module parameter tab.
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_E2X_EDIFACT_ORDERS_UN_D93A which does the conversion of EDI-XML.
Receiver AS2 adapter configuration:
When the adapter is used in a receiver channel, it obtains a message from the Integration Engine and sends it to a business partner. In this case, the following steps are required:
1. Define the channel as a Receiver channel on the Parameters tab
2. The last step ensures the module sequence is complete:
Make sure the module ModuleProcessorExitBean does exist in the module sequence:
Module Name=localejbs/ModuleProcessorExitBean
Type=L
Module Key=Exit
with the following module parameter:
Module Key=Exit
Parameter Name=JNDIName
Parameter Value=deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
File receiver:
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_X2E_EDIFACT_ORDERS_UN_D93A
ONly the mapping program name changes from E2X to X2E. IN ur case it will be See_X2E_ORDERS_UN_D96A
Thanks
Swarup

Screen 910 getting saved in Local object - not even asking for Package

Hi ABAPers,
I am using Enhancement CONFPP07 and for this created Z project in CMOD.
When I am creating the screen 910 for the screen exit SAPLCORU_S of that Z Project, that 910 is getting created in Local object not even asking for the Package and the request.
I tried to create that screen from the SE80 in the function group XCOF, there also it is getting saved in local object.
I tried to do it from SE51 also, but arrived that screen in the local object only.
Please Suggest me with your valuable comments.
Thanks and Regards
Pinaki Mukherjee

Do a version management on the screen and see if it was ever created before and then deleted. If so, reassign it to the package you want.
Rob

Object not known in CO (IAOM 028)

Hi,
I'm facing a problem with the Settlement Type Prepayment in SAP CRM 2007.
Here you can find the error message:
Object not known in CO (IAOM 028):
"You want to post to the object with technical key belonging to the business scenario . However, there is no Controlling object assigned to this object"
I've read from some forums that BAdIs can be implemented in order to avoid this control, but my question is: without implementing BAdIs, where can I assign the missing Controlling Object?
In CRM? In ECC?
Thanks in advance,
Andrea Ricci

Hi Chandra,
I've the same problem. I've checked the notes and all the settings provided in them are correctly set up in my CRM system.
Can you suggest another kind of solution?
Points if helps,
thanks a lot,
regards,
A.

ACE - SNMP OBJECT not-accesible

Similar Messages

Maybe you are looking for