ACE: which features are enabled by - ACE-SEC-LIC-K9

Our latest ACE Pair is missing the Â ACE-SEC-LIC-K9 license.
Inquiry at our Distributor and Cisco resulted in the fact that this license is EOL/EOS.
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/end_of_life_notice_c51-480367.html
Since i have that license installed in 4 other Datacenter Pairs running A2(1.3)i am not sure which feature will be missing now.
Or is that license a relict which actually does not activate any feature?
Anyone a clue or a doc which explains the features behind this license?
Thanks for reading
Roble

Hi,
Kindly refer the URL:
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/end_of_life_notice_c51-480367.html
Customers of the Cisco ACE Application Control Engine are encouraged to migrate to Software Version ACE A2(1)
Sachinga

Similar Messages

Which Features are Only Available on the Driver

Browsing through the forums, I've found out that the nice Audio Console is only found on the driver CD and not available to download. Are there any other features that can't be downloaded? I personally don't like this implementation because I like installing all my drivers in one go if possible, especially after a reformat, instead of installing old drivers off the CD and then having to update. Thanks everyone

Then don't install the drivers on the cd. Download the latest, install them, don't reboot, run the cd and select Custom install and only install the parts you want, and uncheck the drivers. Or does that make too much sense?

HT201060 Is there a way to be selective about which photos are automatically uploaded to the Family Sharing photo album?

Family Sharing is set up, and "My Photo Stream" and "iCloud Photo Sharing" features are enabled on all devices. However, I would like to limit which photos are shared in the Family Sharing photo album. Here are two scenarios:
I'm shopping for a gift for my daughter at the store, and I see the item I think she'll like. In Messages I want to snap a photo to send to my wife to get her buy-in (authorization), but when I do this, the photo is also automatically uploaded to the Family Sharing album, and my daughter can see it on her iPod Touch until I delete it from iCloud.
On her iPod Touch, my daughter browses images of kittens and cats, cats and kittens (she's 10), and saves many of them to her camera roll to view later. In turn, our Family Sharing photo album is full of random pictures of kittens.
Perhaps all I need to do is turn off "My Photo Stream", to prevent all photos being uploaded to all devices automatically? And in the event I want to share a photo or an event/moment, I can create a Photo Stream on the spot...?

Probably the best solution is to put your daughter on her own iCloud ID (but under your name since she's under-aged). She can continue to use your ID for iTunes store purchases. If you set her up with a separate iCloud ID, then her photo activity and yours will remain separate.
The Family Sharing feature may not be relevant or helpful in this scenario -- as I understand it, Family Sharing is for the sharing of purchases, not iCloud, and only in situations when family members have separate IDs for purchases but want to also share the purchases from a "central ID" (e.g. Parent's ID)

How to query which features my version has?

Hello guys,
I just would like to learn that which features my oracle version has? So what is the query for that? I forgot which data dictionary table stores this information. Thanks

select     name
,     detected_usages
from     dba_feature_usage_statistics
where      detected_usages > 0This will show you which features are being used.
or
select parameter, value from v$option order by 1to see what options are available.

Exchange Integration: Which features accessed directly from Lync Client, which via Lync Server

Hi
I'm wondering which Features of the Lync Server 2013 <-> Exchange 2013 Integration are accessed directly from the Lync 2013
Client (direct Access from the Lync Client to the Exchange Server) and which Features are accessed from the Lync Client via the Lync Server (Access from the Lync Client to the Lync Server to the Exchange Server).
For example: Are Outlook contacts aquired directly from the Exchange Server when searched in the Lync Client.
Thanks,
Michael

Yes, Outlook contacts acquired directly from the Exchange Server when searched in the Lync Client.Integration between Lync and Exchange will give many features as following:
Voice mail.
Lync Archiving Integration.
Unified Contact Store.
Lync Meeting Scheduling from OWA.
High resolution photos.
Also you can refer below link for more info.
http://technet.microsoft.com/en-us/library/jj688098.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

How to find out which lists are using email enabled feature in my SP 2010? Any script? Anything else?

Hi there,
How to find out which lists are email enabled in my SP 2010?
Any script? Anything else?
Thank you.

Hi frob,
check this script that is stated on this link
$SPwebApp = Get-SPWebApplication "http://migration.Company.com"
<# If it is MOSS 2007, You can use:
$SPWebApp = [Microsoft.SharePoint.Administration.SPWebApplication]::Lookup(http://sharepoint.com)
To get SPWebApplication Object
#>
#create a CSV file
"E-Mail,List,Site" > "EMail-Enabled.txt" #Write the Headers in to a text file
foreach ($SPsite in $SPwebApp.Sites) # get the collection of site collections
foreach($SPweb in $SPsite.AllWebs) # get the collection of sub sites
foreach ($SPList list in $SPweb.Lists)
if ( ($splist.CanReceiveEmail) -and ($SPlist.EmailAlias) )
# WRITE-HOST "E-Mail -" $SPList.EmailAlias "is configured for the list "$SPlist.Title "in "$SPweb.Url
$SPList.EmailAlias + "," + $SPlist.Title +"," + $SPweb.Url >> EMail-Enabled.txt #append the data
http://www.sharepointdiary.com/2011/06/find-all-incoming-email-enabled-lists.html
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation. Please remember to mark the reply as answer if it helps.

Which features/components are NOT included in Oracle XE ??

Hi All,
Which features/components of Oracle Standard/Enterprise edition are NOT in Oracle XE (The nice little free database) ? Off-course, I can guess that we cannot implement RAC or Grid using XE, but its just a guess.
I am mainly asking DBA/Developer point of view.
Are features like ,
Partitioning
Advanced Queue
RMAN
XML
Oracle JVM
are in Oracle XE?
Please let us know your experiances.
Thanks.

Please let us know your experiances.In my experience, the documentation is the best place to start.
Cheers, APC
Message was edited by:
APC

Which Enteprise Edition features are being used ?

Hello,
Due to licensing requirements I have been asked to check if a database is using any enterprise edition features so that we can downgrade our binaries to Standard Edition.
I know that I can query
DBA_FEATURE_USAGE_STATISTICS
to find out what features are being used , my question is how would I know if a feature that is being used in part of Enterprise Edition ?*
Thanks,
C.

my question is how would I know if a feature that is being used in part of Enterprise Edition ?As far as I knows, there is no such view/sql/dbms which specifically differentiate the uses of features based upon as a part of that specific edition. If you are using X edition, then the query output of DBA_FEATURE_USAGE_STATISTICS and DBA_HIGH_WATER_MARK_STATISTICS will be based upon the edition. Suppose ABC feature exists in enterprise edition and DBA_FEATURE_USAGE_STATISTICS is saying that ABC feature has been used, so it means that ABC feature has been used as a part of enterprise edition. If there is no ABC feature in installed edition, you will never find the uses of ABC feature in that edition. So very simple is any feature has been reported by DBA_FEATURE_USAGE_STATISTICS view; it means that feature has been used in part of said edition.
Couple of Good scripts at : http://kerryosborne.oracle-guy.com/2008/10/oracle-management-packs/
Regards
Girish Sharma

The Parallel Data Warehouse (PDW) features are not enabled.

Tryin to use the Over Clause and receiving the following message:
Msg 11305, Level 15, State 10, Line 2
The Parallel Data Warehouse (PDW) features are not enabled.
Microsoft SQL Server Management Studio 10.0.5500.0
Microsoft Analysis Services Client Tools 10.0.5500.0
Microsoft Data Access Components (MDAC) 6.1.7601.17514
Microsoft MSXML 3.0 5.0 6.0
Microsoft Internet Explorer 9.0.8112.16421
Microsoft .NET Framework 2.0.50727.5456
Operating System 6.1.7601

That's only the information about your client tools; the SQL Server version is mor of interest. You can query it with
SELECT @@VERSION
Olaf Helper
* cogito ergo sum * errare humanum est * quote erat demonstrandum *
Wenn ich denke, ist das ein Fehler und das beweise ich täglich
Blog
Xing

HT4995 i lost my iphone 4 last night and its not reachable assuming someone took out the sim.. so can i or my network company track the iphone which is not reachable through assuming location services and find my phone apps are enabled?

i lost my iphone 4 last night and its not reachable assuming someone took out the sim.. so can i or my network company track the iphone which is not reachable through assuming location services and find my phone apps are enabled?

No. Find My Phone is the only way to locate any lost iPhone. However, this requires that Find My Phone be turned on/activated before the phone was lost, and the phone must have an Internet connection. If your phone is turned off, does not have an Internet connection, or has been restored, there is no way to locate it.

I want to disable plugins, which i can do through add-ons manager, but every time i restart firefox they are enabled again

When i disable plugins firefox runs faster. I could uninstall the plugins, but i periodically want to use them. I have tried using click to play but i want some plugins to run automatically.
I want to disable selective plugins and have some enabled. When i do this via add-ons manager, all plugins are enable on restarting firefox.

i don't use any cleanup tools & MSE is my security software, which is rather unobtrusive and shouldn't interfere here...
i currently have one blocklisted plugin (see screenshot), but if i remember it correctly the problem was already present in my case before i had the outdated acrobat plugin installed.
sometimes when you enable/disable a plugin in the addons manager & press f5 afterwards, it immediately switches back to its old state/sometimes it will stay on the new state until a restart of the browser & in some cases it will remember the state even across sessions - it's just not working reliably in any way.
as far as i can observe the pluginreg.dat file in my profile folder the change of a plugin's state isn't written to the file as soon as it's toggled in the UI during a session, but only when the browser is getting closed - so the information has to be in the memory somewhere before and might be getting corrupted. i suspect it might be a general bug but i cannot reproduce it reliably .
''edit: forgot to attach the screenshot & i'm using the current aurora build''

How to find out which objects are at the end of the datafiles

My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.

>
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.
>
You may want to copy this and add it to your toolkit
See 'What's at the End of the File?' in this Tom Kyte article from the Sept 2004 Oracle Magazine
http://www.oracle.com/technetwork/issue-archive/o54asktom-086284.html
And this AskTom blog shows you how to generate a script containing ALTER statements toresize your datafiles to the smallest possible. You can 'pick and choose' from the ALTER statements to do what you want.
Then of course, you can use techniques from this article by Oracle ACE, and noted author, Jonathan Lewis
http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/

How to buy Cisco (ACE-UPG2-LIC=) 8Gbit to 16Gbit?

The Cisco (ACE-UPG2-LIC=) product is an upgrade from 8Gbit to 16Gbit throughput. How does a customer get this license? It is for the Cisco ACE 20 or ACE 30 Modules, which I believe are End of Sale, but still supported.
Any help would be appreciated..
Thanks,
RO

You cannot buy the license. Neither Cisco nor any authorized reseller will sell it as the product is no longer for sale (as of 24 January 2014). Reference.
You need to either make do with the ACE you have or migrate to a different ADC platform (like the Citrix Netscaler, F5 BigIP, A10 Networks appliances, etc.).

Have an airplay enabled AV Receiver - how do i set up Airplay I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the

have an airplay enabled AV Receiver - how do i set up Airplay
I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
Do I need Apple TV or to change some settings somewhere?
Any help would be greatly appreciated

You are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
About AirPlay Mirroring in OS X Mountain Lion:
http://support.apple.com/kb/HT5404
iOS: Recommended settings for Wi-Fi routers and access points:
http://support.apple.com/kb/HT4199
Troubleshooting AirPlay and AirPlay Mirroring:
http://support.apple.com/kb/TS4215
Good luck in setting up 802.11 wirelesss network.

How do I upload to Facebook in High Resolution using my iPhone. Do I need an app? Which ones are best for the job? (I know how to do it on a PC :) )

How do I upload photos to Facebook in High Resolution using my iPhone. Do I need an app? Which ones are best for the job? (I know how to do it on a PC )

100pat wrote:
Thanks, I can do it fine from my Windows desktop PC, I just want to know how to do it from an iPhone4
Like I said before ask facebook or look at their support site to see if that is even a feature.

ACE: which features are enabled by - ACE-SEC-LIC-K9

Similar Messages

Maybe you are looking for