Acer aspire, one logged in screen goes fuzzy what's wrong how do you fix it

ONCE I log in my screen goes all fuzzy. Like old VCR tapes used to do how do younfix it?

Hello, Do you have the same issue with an external monitor or a LCD TV in using the VGA or HDMI port?

Similar Messages

Acer Aspire One A0A 150: screen flicker, blanking (intel driver?)

Being the stubborn sort, I've been struggling for more than a month with the following problem, to no avail.
The screen on my Acer flickers while running X (seems to be independent of window manager I run.) Even worse, at random intervals, the screen will actually go completely black (or sometimes green or blue, but usually black.)
To be clear, I am not absolutely sure the flickering and screen blanking are related to each other... only 90% certain.
The flickering and blanking seem completely unrelated to what I'm doing on the computer. The blanking will happen if I'm watching a movie, or even if I'm simply typing an email (in fact, it has happened as I typed this post!) When the screen blanks out, the only way to recover it is to shut the lid of the laptop, wait a couple of seconds, and open it again. Closing the laptop lid suspends the laptop and the screen seems to recover when the computer wakes up. Nothing else seems to bring the screen back: not console switching, not killing X, nor any magic key combination. Before I figured out that suspend/resume would bring back the screen, I had to reboot it with SysRq-B.
Although the flicker/blanking happens frequently, it leaves no traces I can find in either dmesg or Xorg log. I do not use an xorg.conf file.
One MIGHT think it is a hardware issue, but it NEVER occurs when I boot into Windows XP. I have used XP for days without any flicker or blanking (hence one reason I think the two issues are related.) Also, I'm pretty sure it doesn't occur when I boot the computer into xPUD.
Some research led me to think my issue might be with the intel driver. With that in mind, I've tried different versions of the driver:
xf86-video-intel from both extra and testing.
xf86-video-intel-git from AUR
xf86-video-intel-newest from AUR.
(In each case, with the appropriate dependencies, etc.)
Presently, I'm using the driver from testing, but none of the drivers has made any noticeable difference: the problem remains.
Finally, I am using Tera's one-dev kernel for the Acer Aspire One, available in AUR.
Does anyone have any idea how to fix this issue? It's driving me to rely on Windows XP a lot more often, as suspending/resuming the laptop when it blanks out really interrupts my work. Please save me from Windows :-)
Last edited by tw (2009-12-29 09:48:09)

damjan wrote:UVESAFB and KMS will probably never work together. Just use KMS it's way better (and you should be able to run same splash on KMS too)
Thanks. Means I yet again learned something about linux the trial and error way.
I actually used a setup where KMS was disabled and UVESAFB enabled, since the Arch Wiki entry on Splashy strongly recommended UVESAFB and didn't mention KMS. Oh well. KMS enabled now, the UVESAFB daemon thrown out. I should probably get a wiki account, suggest a clarification of that entry to prevent other newbies from making the same mistake.
EDIT: Added a section on KMS to the Arch Wiki entry on Splashy
Last edited by caligo (2010-01-11 12:49:01)

I have an iPhone 4S with a smudge or smear under the front glass screen and a cracked backplate. How do you fix the front screen? HELP!!

How do You fix a iPhone 4S with a smudge under the front screen and a shattered backplate?

You can purchase replacement parts from a third-party vendor, or a replacement iPhone from Apple. If you choose the former, there are many online videos to assist you with the teardown and repair.

KDE 4.4.0 crashes when logging in on Acer Aspire One

Hello,
I just made an ArchLinux fresh installation on my Acer Aspire One, A1-ZG5. This is my problem: when I log in to KDE, the splash screen comes and then screen freezes. There is one gray window in the top of the screen that just flashes, no windows nor plasma can be seen. I have installed other KDE distros in the same netbook and worked well. I had had the same problem once, when I installed KDE 4.3.1, and never could fix it... KDE seems to be working like in the background; config files are still being created with the frozen screen...any ideas?...Thanks for your help!...:rolleyes:

is your disk full?
if not, try to switch off the services, remone network-manager plasmoids, and try again

Can't boot Arch from USB on Acer Aspire One...

Hi All,
New to the forums, relatively new to Linux. I've tried several distros including #!, U/K/Xubuntu, Mint, Kuki, Puppy and Wolvix. However none of them, except maybe Mint, have played very nicely with my Acer Aspire One netbook. Even Kuki was a bit of a disaster, though I liked the Midori browser, first time I'd used it was under Kuki.
Intro aside, I want to try Arch. I am not scared of a bit of hands-on work via CLI, although am certainly no expert when it comes to CLI & Linux!
The problem is, I created a USB install for the latest 32bit version of Arch using Unetbootin (I tried both under Windows and Linux, creating USB live sticks with both). However when I try to boot from USB, all goes well until just after a message during the boot process appears. I forget off the top of my head what the error message says, though it appears after successfully waiting 30 seconds to discover a SCSI drive (or something along those lines).
The error has nothing to do with the drive, it's related to the step in the boot process that comes after that. Whatever the message is (I'm at work so cannot access logs or anything right now) it ends up asking me to resolve from a CLI prompt, which then leaves me with a prompt dialog, or to restart and try again.
Nothing seems to work so I am not sure what I am doing wrong or if it might be a bug with Unetbootin or a bug with the latest version of Arch? Or simply a good old fashioned ID10T error?
Any help would be greatly appreciated. Thanks!

Thanks! I'll mark this as an ID10T error for now then. I'll give the USB install image a try tonight. On a side note, does Arch come with Skype pre-installed and if not, is it relatively simple to install a la the *.deb package install?

[SOLVED] Questions on Acer Aspire One netbook resolution

I've been digging through the wiki and googling everything, but I just can't figure out how to get the dang resolution right!
I've got an Acer Aspire One (D257, model ZE6) and technically, it should be 1024 x 600. Everything seems like it's the right size, but it's just slightly blurry and looking at it makes me a bit dizzy, like it's just slightly off. I've read that the Acer netbooks are SIZED to 1024x600 but use the RESOLUTION of 1024x768. Could anyone confirm this? Am I way off base?
The wiki suggests using xrandr to change the resolution, but I get the BADMATCH error. The solutions I googled mostly involve editing an xorg.conf, which doesn't exist. Trying to generate it myself always fails (xorg -configure, which always leads to "number of created screens does not match number of detected devices").
Maybe I've just missed something really obvious... But I can't seem to find it.
Last edited by DevPug (2013-07-27 17:41:41)

WonderWoofy wrote:There is the kernel driver, which is the i915 module from the kernel, and then there is the Xorg driver, which is provided by the xf86-video-intel package. Do you have both?
OH MY GOD. I followed the wiki to a T, but when I double-checked, I didn't have i915 listed in the MODULES="" line. So I must have not saved it, in my hurry to get everything going. My desktop looked okay-ish, but my web browser was resizing text improperly, hence the 'dizzy' effect.
Thank you from the bottom of my heart for catching my silly oversight!
Gusar wrote:I wouldn't say "crappy display", I'd say you don't like the default anti-aliasing.
This is also true, though... My next task is to find better anti-aliasing that I can get along with. The default just isn't cutting it, now that I can see it clearly.
Last edited by DevPug (2013-07-27 17:57:58)

[HOWTO] Installing Arch Linux stable release on Acer Aspire One 522

[This is a work on progress and my first howto ever]
These steps will teach you how to install ArchLinux x64 stable release (currently 2010.05) on Acer Aspire One 522 from an existing ArchLinux (your desktop computer)
As you need a 2.6.37+ kernel to make networking work on the AO522, installing stable release as is won't work.
This Howto borns with the intention to address this problem.
You need to be familiarized with Linux internals to follow this howto.
(Expect this howto to become useless with new stable releases of ArchLinux.)
Remember to make a backup of your Windows 7 Starter system before installing ArchLinux.
I did a full raw copy of the harddisk by using systemrescuecd, an external harddisk and dd utility:
Just boot with systemrescuecd
Mount your external harddisk on /mnt/floppy for example
Clone harddisk with: dd if=/dev/sda |gzip -c > /mnt/floppy/ao522.img
This process took me a lot of time since my external harddisk is USB-1 (almost an entire evening)
Result image was about 22GB size
This image will restore partition table, boot sector and all data if things go wrong.
I followed some of the steps from this guide: https://wiki.archlinux.org/index.php/In … ting_Linux
If you have some Gentoo Linux experience you will find those steps really familiar.
You will need 2 USB pendrives or similar storage options.
One is needed to boot into your netbook, and the other to store our custom archlinux build.
Making an updated ArchLinux system
1) Make a local dir on your existing linux system
# mkdir ./newarch
2) Install pacman database on it
# pacman -Sy -r ./newarch
3) Install base system
# pacman -S base -r ./newarch
4) Let's chroot inside
# cp /etc/resolv.conf ./newarch/etc/
# cp /etc/pacman.d/mirrorlist ./newarch/etc/pacman.d
# mount -t proc proc ./newarch/proc
# mount -t sysfs sys ./newarch/sys
# mount -o bind /dev ./newarch/dev
# chroot ./newarch /bin/bash
5) Edit configuration files
# nano -w /etc/rc.conf
# nano -w /etc/hosts
# nano -w /etc/mkinitcpio.conf
Forget /etc/fstab for now since you don't know what partitions to use yet
6) Generate kernel image
# mkinitcpio -p kernel26
7) Generate locales
# nano -w /etc/locale.gen
# locale-gen
8) Make a tarball with our custom ArchLinux
# exit
# umount ./newarch/proc
# umount ./newarch/dev
# umount ./newarch/sys
# tar -cvpf newarch.tar ./newarch
9) Copy this tarball to an USB pendrive or external harddisk
10) Boot your netbook with a Linux bootable USB stick (I used systemrescuecd, and remember to pick the x64 bit kernel at grub screen)
You can use any linux distribution with usb bootable options. I suppose ArchLinux works too
To install SystemRescueCD on an USB stick follow this tutorial -> SystemRescueCD on usb stick
Insert the usb stick on your netbook, switch on, hit F2 to enter BIOS menu, and choose to boot from USB as first option. Save and Exit.
You should be booting into SystemRescueCD without any problem.
After initialization you will end in a root prompt.
11) Let's partition the disk
You will find 3 partitions if this is your first time:
/dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
/dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
/dev/sda3 29566976 488397167 229312696 7 HPFS/NTFS/exFAT
My recomendation is to leave sda1 and sda2 intact, as they have the recovery information to restore Windows 7 Starter
You have plenty of space with sda3, about 230G.
So run fdisk/cfdisk and delete /dev/sda3
Now create a 100M partition for boot
Now create a Extended partition with all the space left
Now create a 1GB logical partition for swap
Now create a 10-15 GB logical partition for root system
And finally a logical partition for our home partition with all space left
Your partition table should look like this:
/dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
/dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
/dev/sda3 29566976 29771775 102400 83 Linux
/dev/sda4 29771776 488397167 229312696 5 Extended
/dev/sda5 29773824 31821823 1024000 83 Linux
/dev/sda6 31823872 63281151 15728640 83 Linux
/dev/sda7 63283200 488397167 212556984 83 Linux
12) Create filesystems
I choosed ext2 for boot, and reiserfs for root and home partitions.
# mke2fs /dev/sda3
# mkreiserfs /dev/sda6
# mkreiserfs /dev/sda7
# mkswap /dev/sda5
13) Mount partitions
# mkdir arch
# mount /dev/sda6 arch
# mkdir arch/boot
# mount /dev/sda3 arch/boot
# mkdir arch/home
# mount /dev/sda7 arch/home
14) Copy our custom ArchLinux build on it
# mount /dev/sdb1 /mnt/floppy (for example)
# cd arch
# tar -xvpf /mnt/flopy/newarch.tar
15) Configure /etc/fstab
Mine is as follows:
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
/dev/sda3 /boot ext2 defaults 0 1
/dev/sda6 / reiserfs defaults 0 1
/dev/sda7 /home reiserfs defaults 0 1
/dev/sda5 swap swap defaults 0 0
16) Chroot in your new system
# mount -t proc proc ./proc
# mount -t sysfs sys ./sys
# mount -o bind /dev ./dev
# chroot ./ /bin/bash
17) Install grub
# grub-install
Edit /boot/grub/menu.lst to suit your needs
Mine looks like this:
timeout 5
default 0
color light-blue/black light-cyan/blue
title Arch Linux
root (hd0,2)
kernel /vmlinuz26 root=/dev/sda6 ro
initrd /kernel26.img
title Arch Linux Fallback
root (hd0,2)
kernel /vmlinuz26 root=/dev/sda6 ro
initrd /kernel26-fallback.img
title Windows 7 Recovery
rootnoverify (hd0,0)
makeactive
chainloader +1
As you see, you can restore Windows 7 Starter from Grub.
18) Change root password
# passwd
19) Add a regular user account
# useradd -G video,audio,users -m username
# passwd username
20) You're done!
# exit
# cd ..
# umount ./arch/proc
# umount ./arch/dev
# umount ./arch/sys
# umount ./arch/boot
# umount ./arch/
# reboot
Remove the usb stick from your netbook.
If all went ok, you will be inside your new stable and updated ArchLinux system
Next post is reserved for software configurations specific to the Acer Aspire One 522
Last edited by tigrezno (2011-04-20 12:22:38)

Using acpid to achieve the following:
- Change screen brightness when operating in battery mode
- Power off when the power button is pressed
- Suspend when the lid is down
- Reduce CPU frequency speed to maximize battery usage
Remember that system suspend is only supported by ati free driver xf86-video-ati
1) Install acpid daemon and cpufrequtils
# pacman -S apcid cpufrequtils
2) edit acpid handler script
# nano -w /etc/acpi/handler.sh
Change the following section:
ac_adapter)
case "$2" in
AC)
case "$4" in
00000000)
echo -n $minspeed >$setspeed
#/etc/laptop-mode/laptop-mode start
00000001)
echo -n $maxspeed >$setspeed
#/etc/laptop-mode/laptop-mode stop
esac
*) logger "ACPI action undefined: $2" ;;
esac
for:
ac_adapter)
case "$2" in
ACAD)
case "$4" in
00000000)
echo 3 > /sys/devices/virtual/backlight/acpi_video0/brightness
cpufreq-set -c 0 -f 800Mhz
cpufreq-set -c 1 -f 800Mhz
00000001)
echo 9 > /sys/devices/virtual/backlight/acpi_video0/brightness
cpufreq-set -c 0 -f 1000Mhz
cpufreq-set -c 1 -f 1000Mhz
esac
*) logger "ACPI action undefined: $2" ;;
esac
Make sure you changed AC) for ACAD)
Now change this other section:
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF) logger "PowerButton pressed: $2" ;;
*) logger "ACPI action undefined: $2" ;;
esac
with:
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF) poweroff ;;
*) logger "ACPI action undefined: $2" ;;
esac
Change:
button/lid)
#echo "LID switched!">/dev/tty5
logger "ACPI group/action undefined: $1 / $2"
for:
button/lid)
pm-suspend && /etc/rc.d/network restart
logger "ACPI group/action undefined: $1 / $2"
Network restart is used because wlan0 will disconnect from AP after some time. You can try using iwconfig wlan0 essid <ap> key <key> instead of the network script, but haven't tested it myself.
3) Start acpid and load modules
# modprobe powernow-k8
# /etc/rc.d/acpid start
Add "acpid" to DAEMONS in /etc/rc.conf to start on boot
Add "powernow-k8" to the modules sections on /etc/rc.conf to load at boot
Stopping system freezes due to ethernet driver
The only way people have found to avoid freezes is by blacklisting atheros kernel drivers.
To do it at boot just edit /etc/rc.conf and change the MODULES line as this:
MODULES=(!ath9k !atl1c)
Reboot and you're done, but remember to not press the Wifi key, because it can freeze your system.
Correctly starting wireless at boot
I've found that standard scripts wont load properly my wireless lan. It gave an error telling you to use the WIRELESS_TIMEOUT variable and such.
To solve this, edit /etc/rc.d/network script and change the wi_up function by adding a second iwconfig command like this:
wi_up()
eval iwcfg="\$wlan_${1}"
[[ ! $iwcfg ]] && return 0
/usr/sbin/iwconfig $iwcfg
[[ $WIRELESS_TIMEOUT ]] || WIRELESS_TIMEOUT=2
sleep $WIRELESS_TIMEOUT
/usr/sbin/iwconfig $iwcfg
bssid=$(iwgetid $1 -ra)
It will do the trick and will start at boot correctly. This is not a solution but a fix.
Adjust Touchpad to disable false taps
What I did here is defining an area to be ignored. This area are 3 rectangles on top, left and right of the touchpad.
This means you can write and press space without having the cursor click out of the window and such.
# synclient AreaLeftEdge=150
# synclient AreaRightEdge=1300
# synclient AreaTopEdge=300
Also, add it to your /etc/X11/xorg.conf.d/10-evdev.conf:
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "AreaTopEdge" "300"
Option "AreaLeftEdge" "150"
Option "AreaRightEdge" "1300"
EndSection
You can play with those values. They just work for me.
Last edited by tigrezno (2011-04-23 13:49:48)

Acer Aspire one will not boot up

When I boot up my Acer Aspire one I get a message that says:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "next"
3. Click "Repair your computer"
If you do not have this disc. contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000e
Info: An error occurred while attempting to read the boot configuration data.
The only problem is that my net book has no disc drive. What am I to do??

From ABOUT:
Start
System Recovery Options.
There are several ways of starting System Recovery Options. See How To Access the System Recovery Options Menu in the link above for help.
Open Command Prompt from the System Recovery Options menu.
Note: The
Command Prompt available from the System Recovery Options menu is very similar to the one you may be familiar with within Windows. Also, the following procedure should work as described in both Windows 7 and Windows Vista.
At the prompt, type the bootrec
command as shown below and then press Enter:
bootrec /rebuildbcd
The bootrec command will search for Windows installations not included in the Boot Configuration Data and then ask you if you'd like to add one or more to it.
You should see one of the following messages at the
command line.
Option 1
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 0
The operation completed successfully.
Option 2
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 1
[1] D:\Windows
Add installation to boot list? Yes<Y>/No<N>/All<A>:
If you see:
Option 1: Move on to Step 5. This result most likely means that Windows installation data in the BCD store exists but bootrec couldn't find any
additional installations of Windows on your computer to add to the BCD. That's fine, you'll just need to take a few extra steps to rebuild the BCD.
Option 2: Enter Y or Yes to the
Add installation to boot list? question, after which you should see a
The operation completed successfully message, followed by a blinking cursor at the prompt. Finish up with Step 10 toward the bottom of the page.
Since the BCD store exists and lists a Windows installation, you'll first have to "remove" it manually and then try to rebuild it again.
At the prompt, execute the bcdedit command as shown and then press Enter:
bcdedit /export c:\bcdbackup
The bcdedit command is used here to export the BCD store as a file: bcdbackup. There's no need to specify a
file extension.
The command should return the following on screen:
The operation completed successfully.
meaning the BCD export worked as expected.
At this point, you need to adjust several
file attributes for the BCD store so you can manipulate it.
At the prompt, execute the attrib command exactly like this:
attrib c:\boot\bcd -h -r -s
What you just did with the attrib command was remove the
hidden, read-only, and
system attributes from the file
bcd. Those attributes restricted the actions you could take on the file. Now that they're gone, you can manipulate the file more freely - specifically, rename it.
To rename the BCD store, execute the ren command as shown:
ren c:\boot\bcd bcd.old
Now that the BCD store is renamed, you should now be able to successfully rebuild it, as you tried to do in Step 3.
Note: You could delete the BCD file entirely since you're about to create a new one. However, renaming the existing BCD accomplishes the same thing since it's now unavailable to Windows, plus provides you yet another layer of backup, in
addition to the export you did in Step 5, if you decide to undo your actions.
Try rebuilding the BCD again by executing the following, followed by Enter:
bootrec /rebuildbcd
which should produce this in the Command Prompt window:
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 1
[1] D:\Windows
Add installation to boot list? Yes<Y>/No<N>/All<A>:
meaning that the BCD store rebuild is progressing as expected.
At the Add installation to boot list? question, type Enter Y or
Yes, followed by the Enter key.
You should see this on screen:
The operation completed successfully.
meaning that the BCD rebuild is complete.
Restart your computer.
Assuming that an issue with the BCD store was the only problem, Windows should start as expected.
If not, continue to troubleshoot whatever specific issue you're seeing that's preventing Windows from booting normally.
Important: Depending on how you started System Recovery Options, you may need to remove a disc or
flash drive before restarting.

Not starting - for Android - as supplied with Acer Aspire One D255

''locking as a duplicate - https://support.mozilla.com/en-US/questions/886204''
Download'''bold text''' Not starting - for Android - as supplied with Acer Aspire One D255

Many thanks for a reply. It's good to get some feedback at least. I must admit I won't be too concerned if it's not compatible as I've since migrated to more useful tablet devices. This thing was always a bit of a mistake, especially with the annoyingly useless android bolt on. But as I use it for the occasional larger screen benefit and printer link, it would be good to have the benefit of latest MS. It still raises the question of why Acer at least can't provide a definitive list. After all there must be many other idiots like me that bought one? Thanks again
[subject line edited to reflect new topic]

Acer Aspire One will only connect via Fon now on H...

Since activating Fon on my BT Home Hub my Acer Aspire One - running Linux Linpus - will no longer log on to the 'normal' wireless connection on my hub, only Fon, which has limited bandwidth, etc.
Anybody know why? Have a solution?
I've 'proved' it's the Fon activation my doing a full reset on the hub. My One connected normally until Fon was reactivated, then back to Fon connection only

Re WPA - it was fine until Fon was activated!
When I did a factory reset on the hub the One connected as normal - until Fon reactivated at which point it was back to via Fon only!
As the MAC address for FON and your normal SSID would be the same, perhaps it is seeing your normal SSID and assuming that is FON, and connecting to that in preference to your normal one.
Really strange problem.......
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Roxio won't open in Desktop Manager Ver 4.5 on Acer Aspire one

When I try to open Roxio, in Desk Top Manager V 4.5, it gives a message that my screen resolution should be set to 1024 x 768 but my Acer aspire One is only capable of 1024 x 600. It works fine on another notebook and my desktop. I'd really like to get my music and jpg files from my 8830 to this new laptop also. Does anyone know of a work around for this problem? Thanks.
Solved!
Go to Solution.

You can do it with windows explorer, connect the device to the pc and open windows explorer, and you can manage all the pictures and songs, becuase the device is detected like a external hard drive
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Acer Aspire One part 2

As the original Acer Aspire One thread is getting so long thought I would start a new thread..
Please post here with about custom kernels, tips tricks, problems etc...
Wiki page on AAO is at :
http://wiki.archlinux.org/index.php/Acer_Aspire_One
MrG

iusedtohaveaneeepc wrote:How you guys get 1024x600 without using initrd file?
Probably because it's in xorg.conf... Correct me if I'm wrong..
Anyways... For me it works without changing anything.
If you want to try with my xorg.conf...:
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Synaptics Mouse" "AlwaysCore"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
EndSection
Section "Module"
Load "synaptics"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
FontPath "/usr/share/fonts/artwiz-fonts"
FontPath "/usr/share/fonts/local"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "ca"
Option "XkbVariant" "fr"
# Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Synaptics Mouse"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.09"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0015"
Option "SHMConfig" "on"
# new in synaptics 0.99
Option "ClickFinger1" "1"
Option "ClickFinger2" "0"
Option "ClickFinger3" "0"
Option "HorizTwoFingerScroll" "0"
Option "VertTwoFingerScroll" "0"
Option "HorizScrollDelta" "100"
Option "PressureMotionMinZ" "10"
Option "FingerPress" "256"
Option "PalmDetect" "0"
Option "PalmMinWidth" "10"
Option "PalmMinZ" "200"
Option "MaxTapMove" "220"
Option "MaxTapTime" "180"
Option "MaxDoubleTapTime" "200"
Option "TapButton1" "1"
Option "TapButton2" "0"
Option "TapButton3" "0"
Option "RTCornerButton" "2"
Option "RBCornerButton" "3"
Option "LTCornerButton" "0"
Option "LBCornerButton" "0"
# Circular scrolling is uber-cool, but it's not for everyone. Check out "gsynaptics" as well.
Option "CircularScrolling" "0"
# Scrolling with the right and bottom side can be fun... or incredibly annoying. Use "1" to enable.
Option "HorizEdgeScroll" "0"
Option "VertEdgeScroll" "1"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "Monitor0"
Modeline "1024x600" 48.96 1024 1064 1168 1312 600 601 604 622 -HSync +VSync
DisplaySize 346 203 # 75 DPI @ 1024x600
EndSection
Section "Device"
Identifier "Videocard0"
Driver "intel"
Option "Clone" "true"
Option "MonitorLayout" "LVDS,VGA"
BusID "PCI:0:2:0"
Option "MigrationHeuristic" "greedy"
Option "AccelMethod" "EXA"
Option "NoDCC"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x600" "800x600" "640x480"
Virtual 1920 1800
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
You'll just have to change the keyboard setup to fit it to your needs

[SOLVED] Acer Aspire One D250 LAN not detected.

Hi guys,
Cant seem to find anyone on the net that has the same problem as me, but here it goes.
I have a Acer Aspire One D250, Id really like to run linux on it. There are dozens of posts on the web explaining you need to install the drivers from the Atheros site because the output of lspci is wrong.
Well, the problem that i am having with Arch is that lspci doesnt even show my network card, and as soon as i boot, the light on the physical card turns on, but never goes off (almost like it hangs...)
Ive included the output of Arch's lspci where its not visible, and the output of the ubuntu live netbook remix where it is visible just as the wrong name.
Its almost like arch wants to load the wrong driver and then the card just freezes.... but i dont know, im not a fiull blown linux expert...
Hope someone can help me because its driving me crazy.
This is the output from the arch lspci:
# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
This is the output from the ubuntu netbook remix lspci:
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
03:00.0 Ethernet controller: Attansic Technology Corp. Device 1062 (rev c0)
Last edited by kirothi (2009-10-09 08:40:23)

Kernel Installed from the testing repo, now im getting the following build errors:
# make install
make -C /lib/modules/2.6.31-ARCH/build SUBDIRS=/root/atheros_ln_driver/src modules
make[1]: Entering directory `/usr/src/linux-2.6.31-ARCH'
CC [M] /root/atheros_ln_driver/src/at_main.o
/root/atheros_ln_driver/src/at_main.c: In function 'at_request_irq':
/root/atheros_ln_driver/src/at_main.c:262: warning: passing argument 2 of 'request_irq' from incompatible pointer type
include/linux/interrupt.h:116: note: expected 'irq_handler_t' but argument is of type 'void (*)(int, void *)'
/root/atheros_ln_driver/src/at_main.c: In function 'at_probe':
/root/atheros_ln_driver/src/at_main.c:343: warning: 'DMA_nnBIT_MASK' is deprecated
/root/atheros_ln_driver/src/at_main.c:344: warning: 'DMA_nnBIT_MASK' is deprecated
/root/atheros_ln_driver/src/at_main.c:347: warning: 'DMA_nnBIT_MASK' is deprecated
/root/atheros_ln_driver/src/at_main.c:348: warning: 'DMA_nnBIT_MASK' is deprecated
/root/atheros_ln_driver/src/at_main.c:392: error: 'struct net_device' has no member named 'open'
/root/atheros_ln_driver/src/at_main.c:393: error: 'struct net_device' has no member named 'stop'
/root/atheros_ln_driver/src/at_main.c:394: error: 'struct net_device' has no member named 'hard_start_xmit'
/root/atheros_ln_driver/src/at_main.c:395: error: 'struct net_device' has no member named 'get_stats'
/root/atheros_ln_driver/src/at_main.c:396: error: 'struct net_device' has no member named 'set_multicast_list'
/root/atheros_ln_driver/src/at_main.c:397: error: 'struct net_device' has no member named 'set_mac_address'
/root/atheros_ln_driver/src/at_main.c:398: error: 'struct net_device' has no member named 'change_mtu'
/root/atheros_ln_driver/src/at_main.c:399: error: 'struct net_device' has no member named 'do_ioctl'
/root/atheros_ln_driver/src/at_main.c:403: error: 'struct net_device' has no member named 'tx_timeout'
/root/atheros_ln_driver/src/at_main.c:411: error: 'struct net_device' has no member named 'vlan_rx_register'
/root/atheros_ln_driver/src/at_main.c:414: error: 'struct net_device' has no member named 'poll_controller'
/root/atheros_ln_driver/src/at_main.c: In function 'at_io_error_detected':
/root/atheros_ln_driver/src/at_main.c:834: error: 'struct net_device' has no member named 'priv'
/root/atheros_ln_driver/src/at_main.c: In function 'at_io_slot_reset':
/root/atheros_ln_driver/src/at_main.c:857: error: 'struct net_device' has no member named 'priv'
/root/atheros_ln_driver/src/at_main.c: In function 'at_io_resume':
/root/atheros_ln_driver/src/at_main.c:884: error: 'struct net_device' has no member named 'priv'
make[2]: *** [/root/atheros_ln_driver/src/at_main.o] Error 1
make[1]: *** [_module_/root/atheros_ln_driver/src] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.31-ARCH'
make: *** [default] Error 2
again, no internet information available, although someone posted about editing the source file, but getting send and transmit errors once the driver was loaded into the kernel.
thanks for the help.
P.S. compiling this thing under ubuntu was no problem, and it worked instantly.

Acer aspire one webcam not working

Dear all,
I'm having trouble getting the built-in camera in my Acer Aspire One (AOA110 - Ab) to work. It should be an Acer Crystal Eye camera, or a "Microdia Sonix USB" (from here)
In either case, according the Archlinux wiki (link) the uvcvideo module should make it work, and I have added it to my rc.conf.
Whenever I try to open the camera using whichever program, however, I get a message of the camera not being found. Wxcam, for instance, gives the following error:
/dev/video0: No such file or directory
lsusb also doesn't list the camera:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
And these are all the video/webcam related entries I could find in dmesg:
[ 0.242888] pci 0000:00:02.0: Boot video device
[ 0.264486] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 0.264501] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
[ 7.069685] Linux video capture interface: v2.00
[ 7.136704] usbcore: registered new interface driver uvcvideo
[ 7.136712] USB Video Class driver (v1.0.0)
I remember the webcam working somewhere in the past, but I can't remember when. I'm using the kernel-netbook kernel, but booting with the normal kernel doesn't seem to make any difference.
I haven't tried it with other distributions yet.
Any ideas on what could be the matter? Or any steps I could still take?

Hm, well, glad you've got it working, but my problem, unfortunately, remains.
Here's the output of dmseg | grep usb for me:
[ 0.182128] usbcore: registered new interface driver usbfs
[ 0.182128] usbcore: registered new interface driver hub
[ 0.182128] usbcore: registered new device driver usb
[ 0.724071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.724078] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.724084] usb usb1: Product: EHCI Host Controller
[ 0.724089] usb usb1: Manufacturer: Linux 2.6.38-netbook ehci_hcd
[ 0.724094] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.730146] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.730153] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.730159] usb usb2: Product: UHCI Host Controller
[ 0.730164] usb usb2: Manufacturer: Linux 2.6.38-netbook uhci_hcd
[ 0.730169] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.735143] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.735150] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.735156] usb usb3: Product: UHCI Host Controller
[ 0.735161] usb usb3: Manufacturer: Linux 2.6.38-netbook uhci_hcd
[ 0.735166] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.738148] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.738154] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.738160] usb usb4: Product: UHCI Host Controller
[ 0.738165] usb usb4: Manufacturer: Linux 2.6.38-netbook uhci_hcd
[ 0.738170] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.741145] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.741152] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.741158] usb usb5: Product: UHCI Host Controller
[ 0.741163] usb usb5: Manufacturer: Linux 2.6.38-netbook uhci_hcd
[ 0.741168] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.741943] usbcore: registered new interface driver usb-storage
[ 0.742115] usbcore: registered new interface driver libusual
[ 0.767566] usbcore: registered new interface driver rtl819xU
[ 7.051890] usbcore: registered new interface driver uvcvideo
Can't see anything that could be the webcam, really...
Edit: I just booted with the standard kernel to make sure, and the webcam is still not recognised.
The outputs for grepping dmesg with "usb" or "video" are even less filled:
$ dmesg | grep "video"
[ 0.343737] pci 0000:00:02.0: Boot video device
[ 3.864420] Linux video capture interface: v2.00
[ 3.955698] usbcore: registered new interface driver uvcvideo
$ dmesg | grep "usb"
[ 3.935996] usbcore: registered new interface driver usbfs
[ 3.936080] usbcore: registered new interface driver hub
[ 3.936822] usbcore: registered new device driver usb
[ 3.955698] usbcore: registered new interface driver uvcvideo
When I checked /var/dmesg.log, however, there were some more informative entries (maybe, they don't help me much):
[ 0.343737] pci 0000:00:02.0: Boot video device
[ 3.864420] Linux video capture interface: v2.00
[ 3.955698] usbcore: registered new interface driver uvcvideo
[ 3.955708] USB Video Class driver (v1.0.0)
[ 5.393661] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 5.393859] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
These entries are also present in /var/dmesg.log when booting with kernel-netbook, so there does not appear to be any different behaviour. The only difference I can see is that kernel-netbook does detect my multi-card reader.
Last edited by STEELBAS (2011-05-16 12:03:08)

Flash Player crashes instantly, cannot disable hardware acceleration - Ubuntu 11.10 Acer Aspire One

Ubuntu 11.10 32 bit
Firefox 10.0.2 32 bit
Flash 11.1 r102
I have a Acer Aspire One netbook
As soon I hit "play" on a flash movie, flash player crashes
I have tried to disable hardware acceleration to eliminate that possibility, but the check box does not respond to input
I read that the flash player system controls do not respond when there are scrollbars around the screen (as there are on a small netbook screen) so I zoomed out to get rid of the scrollbars, but the systems setting menu is still unresponsive when I try to disable hardware acceleration

Thanks Carl, but as I mentioned:
>I have tried to disable hardware acceleration to eliminate that possibility, but the check box does not respond to input
eg. when I right slick on a player, the setting menu opens up, but the "Enable hardware" check box does not respond to a mouse click and remains on I also tried tabbing around the settings menu and using the return key to select/ de-select but that doesn't work either

Acer aspire, one logged in screen goes fuzzy what's wrong how do you fix it

Similar Messages

Maybe you are looking for