Acess to SLD from ABAP fails

Hi all,
When i go to visual admin of the server,SLD data supplier service & try CIM client test i get the followig error :
"Failed to generate and test CIMOMClient object."
When i try to trigger SLD data transfer i get following error :
"Operation Failed! Failed to collect SLD data. Software caused connection abort: socket write error"
Please let me know how to resolve this

Hi Rajagopal,
Check this link till end
Re: Centralise System Landscape Directory
Re: Error while opening sld page of server
Thanks!

Similar Messages

  • Initial Load from ABAP Failed

    Hi.
    Initial load from ABAP described in following PDF document failed.
    Identity Management for SAP System Landscapes: Configuration Guide
    http://service.sap.com/~sapidb/011000358700001449662008E
    System log Error
    lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
    JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [C:\WINDOWS\system32\sapjcorfc.dll: Can't find dependent libraries]. java.library.path [C:\Program Files (x86)\Java\j2re1.4.2_16\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32;C:\WINDOWS;......
    Environment is
    IdM 7.1
    NW AS JAVA 7.0 SP 17
    Windows 2003 Server 64bit
    SQL Server
    Any help will be most appreciated !

    Hi You Nakamura,
        We are facing the same problem during AS ABAP - initial load with the same error message.
    I downloaded the msvcp71.dll file and placed it in System32 folder. But the problem remains the same (even after server restart).
    The system log shows the same error message and no entries in job log.
    Please let me know if you had followed any different way to install the dll file.
    Regards,
    Vijay.K

  • How to print PDF file content from ABAP in background?

    Hi,
    Is it possible to print PDF file content from ABAP in background?
    I have some PDF content which I need to print it, these PDF files are generated outside the SAP.
    Please have you any suggestions?
    Thank you
    Tomas

    <b><u>Solution:</u></b><br>
    <br>
    The target output device must support PDF print, this is only one limitation.<br>
    <br>
    REPORT  z_print_pdf.
    TYPE-POOLS: abap, srmgs.
    PARAMETERS: p_prnds LIKE tsp01-rqdest OBLIGATORY DEFAULT 'LOCL',
                p_fname TYPE file_table-filename OBLIGATORY LOWER CASE,
                p_ncopi TYPE rspocopies OBLIGATORY DEFAULT '1',
                p_immed AS CHECKBOX.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
      DATA: lv_rc     TYPE i,
            lv_filter TYPE string.
      DATA: lt_files TYPE filetable.
      FIELD-SYMBOLS: <fs_file> LIKE LINE OF lt_files.
      CONCATENATE 'PDF (*.pdf)|*.pdf|' cl_gui_frontend_services=>filetype_all INTO lv_filter.
      CALL METHOD cl_gui_frontend_services=>file_open_dialog
        EXPORTING
          file_filter             = lv_filter
        CHANGING
          file_table              = lt_files
          rc                      = lv_rc
        EXCEPTIONS
          OTHERS                  = 1.
      IF sy-subrc NE 0 AND lv_rc EQ 0.
        MESSAGE 'Error' TYPE 'E' DISPLAY LIKE 'S'.
      ENDIF.
      READ TABLE lt_files ASSIGNING <fs_file> INDEX 1.
      IF sy-subrc EQ 0.
        p_fname = <fs_file>-filename.
      ENDIF.
    AT SELECTION-SCREEN.
      DATA: lv_name   TYPE string,
            lv_result TYPE boolean.
      lv_name = p_fname.
      CALL METHOD cl_gui_frontend_services=>file_exist
        EXPORTING
          file                 = lv_name
        RECEIVING
          result               = lv_result
        EXCEPTIONS
          OTHERS               = 1.
      IF sy-subrc NE 0.
        MESSAGE 'Bad file!' TYPE 'E' DISPLAY LIKE 'S'.
      ENDIF.
      IF lv_result NE abap_true.
        MESSAGE 'Bad file!' TYPE 'E' DISPLAY LIKE 'S'.
      ENDIF.
    START-OF-SELECTION.
    END-OF-SELECTION.
      PERFORM process.
    FORM process.
      DATA: lv_name     TYPE string,
            lv_size     TYPE i,
            lv_data     TYPE xstring,
            lv_retcode  TYPE i.
      DATA: lt_file TYPE srmgs_bin_content.
      lv_name = p_fname.
      CALL METHOD cl_gui_frontend_services=>gui_upload
        EXPORTING
          filename                = lv_name
          filetype                = 'BIN'
        IMPORTING
          filelength              = lv_size
        CHANGING
          data_tab                = lt_file
        EXCEPTIONS
          OTHERS                  = 1.
      IF sy-subrc NE 0.
        MESSAGE 'Read file error!' TYPE 'E' DISPLAY LIKE 'S'.
      ENDIF.
      CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
        EXPORTING
          input_length = lv_size
        IMPORTING
          buffer       = lv_data
        TABLES
          binary_tab   = lt_file
        EXCEPTIONS
          failed       = 1
          OTHERS       = 2.
      IF sy-subrc NE 0.
        MESSAGE 'Binary conversion error!' TYPE 'E' DISPLAY LIKE 'S'.
      ENDIF.
      PERFORM print USING p_prnds lv_data CHANGING lv_retcode.
      IF lv_retcode EQ 0.
        WRITE: / 'Print OK' COLOR COL_POSITIVE.
      ELSE.
        WRITE: / 'Print ERROR' COLOR COL_NEGATIVE.
      ENDIF.
    ENDFORM.                    " PROCESS
    FORM print USING    iv_prndst  TYPE rspopname
                        iv_content TYPE xstring
               CHANGING ev_retcode TYPE i.
      DATA: lv_handle    TYPE sy-tabix,
            lv_spoolid   TYPE rspoid,
            lv_partname  TYPE adspart,
            lv_globaldir TYPE text1024,
            lv_dstfile   TYPE text1024,
            lv_filesize  TYPE i,
            lv_pages     TYPE i.
      CLEAR: ev_retcode.
      CALL FUNCTION 'ADS_SR_OPEN'
        EXPORTING
          dest            = iv_prndst
          doctype         = 'ADSP'
          copies          = p_ncopi
          immediate_print = p_immed
          auto_delete     = 'X'
        IMPORTING
          handle          = lv_handle
          spoolid         = lv_spoolid
          partname        = lv_partname
        EXCEPTIONS
          OTHERS          = 1.
      IF sy-subrc NE 0.
        ev_retcode = 4.
        RETURN.
      ENDIF.
      CALL FUNCTION 'ADS_GET_PATH'
        IMPORTING
          ads_path = lv_globaldir.
      CONCATENATE lv_globaldir '/' lv_partname '.pdf' INTO lv_dstfile.
      OPEN DATASET lv_dstfile FOR OUTPUT IN BINARY MODE.
      IF sy-subrc NE 0.
        ev_retcode = 4.
        RETURN.
      ENDIF.
      TRANSFER iv_content TO lv_dstfile.
      IF sy-subrc NE 0.
        ev_retcode = 4.
        RETURN.
      ENDIF.
      CLOSE DATASET lv_dstfile.
      IF sy-subrc NE 0.
        ev_retcode = 4.
        RETURN.
      ENDIF.
      CALL FUNCTION 'ZBAP_RM_PDF_GET_PAGES'
        EXPORTING
          iv_content = iv_content
        IMPORTING
          ev_pages   = lv_pages.
      lv_filesize = XSTRLEN( iv_content ).
      CALL FUNCTION 'ADS_SR_CONFIRM'
        EXPORTING
          handle   = lv_handle
          partname = lv_partname
          size     = lv_filesize
          pages    = lv_pages
          no_pdf   = ' '
        EXCEPTIONS
          OTHERS   = 1.
      IF sy-subrc NE 0.
        ev_retcode = 4.
        RETURN.
      ENDIF.
      CALL FUNCTION 'ADS_SR_CLOSE'
        EXPORTING
          handle = lv_handle
        EXCEPTIONS
          OTHERS = 1.
      IF sy-subrc NE 0.
        ev_retcode = 4.
        RETURN.
      ENDIF.
    ENDFORM.                    " PRINT

  • Error while calling java program from ABAP

    Hi Experts,
    We are trying for RFC inbound scenario.
    We followed the below blog
    /people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
    We are working with SAP JCO 3.0.2
    We are getting the error : 'STFC_CONNECTION' could not be found in the server repository.
    After I run the Java server program if I execute the RFC destination directly from SM 59 it is showing successful messages.
    If I stop the java program then this RFC is failing. Based on this we concluded that RFC to Java connection is working fine.
    But as mentioned in blog if we call the RFC Destination from ABAP program it is giving the below error,
    'STFC_CONNECTION' could not be found in the server repository.
    If we test the RFC destination using RFC_TRUSTED_CHECK standard FM we are getting the below error.
    'RFCPING' could not be found in the server repository.
    We create the RFC destination of Type : TCP/IP as exactly mention in the blog.
    Please help us in resolving this issue.
    Thanks
    Prince

    Pabi,
    Using the RFC connection,we can establish a link between Java and SAP.
    Afterwards,hope we can call Java program from ABAP.
    Below is the sample piece of code to establish RFC connection(link) between Java and SAP.
    DATA: REQUTEXT LIKE SY-LISEL,
          RESPTEXT LIKE SY-LISEL,
          ECHOTEXT LIKE SY-LISEL.
    DATA: RFCDEST like rfcdes-rfcdest VALUE 'NONE'.
    DATA: RFC_MESS(128).
    REQUTEXT = 'HELLO WORLD'.
    RFCDEST = 'JCOSERVER01'. "corresponds to the destination name defined in the SM59
    CALL FUNCTION 'STFC_CONNECTION'
       DESTINATION RFCDEST
       EXPORTING
         REQUTEXT = REQUTEXT
       IMPORTING
         RESPTEXT = RESPTEXT
         ECHOTEXT = ECHOTEXT
       EXCEPTIONS
         SYSTEM_FAILURE        = 1 MESSAGE RFC_MESS
         COMMUNICATION_FAILURE = 2 MESSAGE RFC_MESS.
    IF SY-SUBRC NE 0.
        WRITE: / 'Call STFC_CONNECTION         SY-SUBRC = ', SY-SUBRC.
        WRITE: / RFC_MESS.
    ENDIF.
    Regards,
    Sree

  • Calling https web service POST method from ABAP

    Hi all,
    I'm having some problems trying to call a credit card https web service from ABAP on 2004s SP11. I'm not using a proxy server and a call from a test https page on my local machine works fine. The page does not require a certificate.
    Do I need to do anything in particular to make https work ? I've done calls to http services without any problems. The only difference from a programming perspective as far as I know is the scheme 2 instead of 1, and the server protocol changed to HTTPS.
    All is fine until  I call method http_client->receive, at that point I get a return code of 1, http_communication_failure. 
    Your suggestions & contributions will be greatly appreciated.
    Cheers,
    Wouter.
    report zcreditcardtest .
    data: wf_user type string .
    data: wf_password type string .
    data: rlength type i,
          txlen type string  .
    data: http_client type ref to if_http_client .
    data: wf_string type string .
    data: wf_string1 type string .
    data: wf_proxy type string ,
          wf_port type string .
    selection-screen: begin of block a with frame .
    parameters: crcard(16) type c lower case default '4242424242424242',
                cvn(4)     type c lower case default '564',
                year(2)    type c lower case default '07',
                month(2)   type c lower case default '11',
                amount(10) type c lower case default '100.00',
                cukey(4)   type c lower case default 'AUD',
                order(10)  type c lower case default 'AB1322-refund'.
    selection-screen skip 1.
    parameters: user(50) lower case,
                password(50) lower case ,
                p_proxy(100) lower case default '' ,
                p_port(4) default ''.
    selection-screen: end of block a .
    at selection-screen output.
      loop at screen.
        if screen-name = 'PASSWORD'.
          screen-invisible = '1'.
          modify screen.
        endif.
      endloop.
    start-of-selection .
      clear wf_string .
      concatenate
      'order.type=capture&customer.username=SOMEUSER'
      '&customer.password=SOMEPASSWORD'
      '&customer.merchant=SOMEMERCHANT'
      '&card.PAN=' crcard
      '&card.CVN=' cvn
      '&card.expiryYear=' year
      '&card.expiryMonth=' month
      '&order.amount=' amount
      '&customer.orderNumber=' order
      '&card.currency=' cukey
      '&order.ECI=IVR'
      '&customer.captureOrderNumber=' order
      '&order.priority=1'
      '&message.end=null'
      into wf_string .
      break-point.
      clear :rlength , txlen .
      rlength = strlen( wf_string ) .
      move: rlength to txlen .
      clear: wf_proxy, wf_port .
      move: p_proxy to wf_proxy ,
            p_port to wf_port .
      call method cl_http_client=>create
        exporting
          host          = 'api.somewhere.com'
          service       = '80'
          scheme        = '2'                        "https
          proxy_host    = wf_proxy
          proxy_service = wf_port
        importing
          client        = http_client.
      http_client->propertytype_logon_popup = http_client->co_disabled.
      wf_user = user .
      wf_password = password .
    * proxy server authentication
      call method http_client->authenticate
        exporting
          proxy_authentication = 'X'
          username             = wf_user
          password             = wf_password.
      call method http_client->request->set_header_field
        exporting
          name  = '~request_method'
          value = 'POST'.
      call method http_client->request->set_header_field
        exporting
          name  = '~server_protocol'
          value = 'HTTPS/1.0'.
      call method http_client->request->set_header_field
        exporting
          name  = '~request_uri'
          value = '/post/CreditCardAPIReceiver'.
      call method http_client->request->set_header_field
        exporting
          name  = 'Content-Type'
          value = 'application/x-www-form-urlencoded; charset=UTF-8'.
      call method http_client->request->set_header_field
        exporting
          name  = 'Content-Length'
          value = txlen.
      call method http_client->request->set_header_field
        exporting
          name  = 'HOST'
          value = 'api.somewhere.com:80'.
      call method http_client->request->set_cdata
        exporting
          data   = wf_string
          offset = 0
          length = rlength.
      call method http_client->send
        exceptions
          http_communication_failure = 1
          http_invalid_state         = 2.
      call method http_client->receive
        exceptions
          http_communication_failure = 1
          http_invalid_state         = 2
          http_processing_failed     = 3.
      if sy-subrc <> 0.
        message e000(oo) with 'Processing failed !'.
      endif.
      clear wf_string1 .
      wf_string1 = http_client->response->get_cdata( ).
    * Further Processing of returned values would go here.

    Well, finally got this running !
    First of all I needed to download SAP Cryptographic Software and install it on the Web Application Server. Added some parameters to the profile, then set up some nodes in strust. Note 510007 describes the full process.
    I then installed the certifcate I needed by opening the website in internet explorer and exporting it to a CER file and then importing it into the SSL client (Anonymous). The blog from Thomas Yung, "BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP" describes the process of exporting and importing certificates.
    I then had to start the HTTPS service on my NW 2004s ABAP preview edition SP11. I set this up for port 443.
    /osmicm --> GOTO --> SERVICES --> SERVICE --> CREATE
    Then finally, the program needed a few changes :
      call method cl_http_client=>create
        exporting
          host          = 'api.somewhere.com'
          service       = '443'                       " <<-----  443 NOT 80
          scheme        = '2'                        "https
          ssl_id        = 'ANONYM'              " <<----- SSL_ID Added
          proxy_host    = wf_proxy
          proxy_service = wf_port
        importing
          client        = http_client.
    and further in the program (thanks Andrew !) :
      call method http_client->request->set_header_field
        exporting
    *   name  = '~server_protocol'             " <<<--- DELETE
          name  = '~request_protocol'         " <<<-- INSERT must be request
          value = 'HTTPS/1.0'.
    and presto, we can now consume a https webservice via a POST method from within an ABAP program ! Nice.... Can I give myself 10 points ?

  • Call SXPG _ CALL _ SYSTEM from ABAP program

    Hi,
    Someone may help me?  I need to call the function module SXPG _ CALL _ SYSTEM from ABAP program for to encrypt a file.
    I created the command by SM49 , but I don't know how I can call it from ABAP program.
    Thanks
    Maria C

    Hi Maria.
    This is a possible code you can use:
    DATA: log LIKE TABLE OF btcxpm WITH HEADER LINE.
    Can contain STDOUT, STDERR
    commandname =
    CALL FUNCTION ‘SXPG_CALL_SYSTEM’
    IMPORTING
      COMMANDNAME = commandname
      PARAMETERS = parameters
    EXPORTING
    STATUS = status
      TABLES
      EXEC_PROTOCOL = log
    EXCEPTIONS
      NO_PERMISSION = 1
      COMMAND_NOT_FOUND = 2
      PARAMETERS_TOO_LONG = 3
      SECURITY_RISK = 4
      WRONG_CHECK_CALL_INTERFACE = 5
      PROGRAM_START_ERROR = 6
      PROGRAM_TERMINATION_ERROR = 7
      X_ERROR = 8
      PARAMETER_EXPECTED = 9
      TOO_MANY_PARAMETERS = 10
      ILLEGAL_COMMAND = 11
      OTHERS = 12.
    The following are the comments of the parameters taken from:
    http://help.sap.com/saphelp_40b/helpdata/en/fa/0971ee543b11d1898e0000e8322d00/content.htm
    Parameters
    IMPORTING Parameters
    Parameter name
    Use
    COMMANDNAME
    The name of the definition of the external command, as specified in the maintenance function (transaction SM69).
    PARAMETERS
    Arguments for the external command as specified by the definition in the R/3 System and by the calling program or user.
    These arguments are checked for impermissible characters, such as the ; under UNIX. Problems are registered with the SECURITY_RISK exception.
    EXPORTING Parameters
    Parameter name
    Use
    STATUS
    Returns the final status of the execution of the external command:
    · Value ‘O’: The external command was started and ran to end successfully.
    · Value ‘E’: An error occurred; the external command was not run successfully.
    Tables Parameters
    Parameter name
    Use
    EXEC_PROTOCOL
    Contains the STDOUT and STDERR output of the external command and any output from the target host system.
    Exceptions
    Exception name
    Meaning
    X_ERROR
    Reserved for future use.
    NO_PERMISSION
    The AUTHORITY-CHECK of the user’s authorization for the authorization object S_LOG_COM failed. The user is not authorized to carry out the command named with the specified arguments on the target system.
    COMMAND_NOT_FOUND
    Command name, as identified by COMMANDNAME and OPERATINGSYSTEM, has not been defined in the maintenance function (transaction SM69).
    PARAMETERS_TOO_LONG
    The combined argument string (ADDITIONAL_PARAMETERS and the DEFINED_PARAMETERS, as returned in ALL_PARAMETERS) exceeds the limit of 128 characters in length.
    SECURITY_RISK
    Either:
    · The command contains impermissible characters. These are characters with potentially dangerous properties, such as ; under UNIX.
    · The command definition specifies that an extra-check function module be run. This function module has rejected execution of the command.
    WRONG_CHECK_CALL_
    INTERFACE
    The command definition specifies that an extra-check function module is to be run. Either this function module is missing, or the interface defined for this function module does not match that of the standard R/3 function module SXPG_DUMMY_COMMAND_CHECK. For more information, please see SXPG_DUMMY_COMMAND_CHECK: Interface for Extra-Check Function Modules.
    TOO_MANY_PARAMETERS
    The command definition specifies that user-specified arguments for the external command are not allowed. However, an additional string of command arguments was specified.
    PARAMETER_EXPECTED
    The command definition includes the placeholder character ?, which signifies that additional user-defined arguments are required. However, no additional arguments string was supplied.
    PROGRAM_START_ERROR
    An error occurred while starting the external command. The R/3 system field SY-MSGV1 contains additional information on the problem.
    PROGRAM_TERMINATION_
    ERROR
    An error occurred while trying to obtain the return code of the external program. The R/3 system field SY-MSGV1 contains additional information on the problem.
    ILLEGAL_COMMAND
    The external command definition was modified "illegally". That is, the command was not modified by means of the maintenance function (transaction SM69).
    The modified command is registered in the system log in its substituted form. The message is registered under the system log ID "LC".
    OTHERS
    Catch any new exceptions added to this function module.
    Hope this will be useful.
    Sandro Lombardo

  • Current Security Context Not Trusted When Using Linked Server From ABAP

    Hello,
    I am experiencing a head-scratcher of a problem when trying to use a Linked Server connection to query a remote SQL Server database from our R/3 system.  We have had this working just fine for some time, but after migrating to new hardware and upgrading OS, DBMS, and R/3, now we are running into problems.
    The target database is a named instance on SQL Server 2000 SP3, Windows 2000 Server.  The original source R/3 system was 4.7x2.00, also on SQL Server 2000 (SP4), Windows 2000 Server.  I had been using a Linked Server defined via SQL Enterprise Manager (actually defined when the source was on SQL Server 7), which called an alias defined with the Client Network Utility that pointed to the remote named instance.  This alias and Linked Server worked great for several years.
    Now we have migrated our R/3 system onto new hardware, running Windows Server 2003 SP1 and SQL Server 2005 SP1.  The application itself has been upgraded to ECC 6.0.  I performed the migration with a homogeneous system copy, and everything has worked just fine.  I redefined the Linked Server on the new SQL 2005 installation, this time avoiding the alias and referencing the remote named instance directly, and it tests out just fine using queries from SQL Management Studio.  It also tests fine with OSQL called from the R/3 server console, both when logged on as SAPServiceSID with a trusted connection, and with a SQL login as the schema owner (i.e., 'sid' in lowercase).  From outside of R/3, I cannot make it fail.  It works perfectly.
    That all changes when I try to use the Linked Server within an ABAP application, however.  The basic code in use is
    EXEC SQL.
       SET XACT_ABORT ON
       DELETE FROM [SERVER\INSTANCE].DATABASE.dbo.TABLE
    ENDEXEC.
    The only thing different about this code from that before the upgrade/migration is the reference to [SERVER\INSTANCE] which previously used the alias of just SERVER.
    The program short dumps with runtime error DBIF_DSQL2_SQL_ERROR, exception CX_SY_NATIVE_SQL_ERROR.  The database error code is 15274, and the error text is "Access to the remote server is denied because the current security context is not trusted."
    I have set the "trustworthy" property on the R/3 database, I have ensured SAPServiceSID is a member of the sysadmin SQL role, I've even made it a member of the local Administrators group on both source and target servers, and I've done the same with the SQL Server service account (it uses a domain account).  I have configured the Distributed Transaction Coordinator on the source (Win2003) system per Microsoft KB 839279 (this fixed problems with remote queries coming the other way from the SQL2000 system), and I've upgraded the system stored procedures on the target (SQL2000) system according to MS KB 906954.  I also tried making the schema user a member of the sysadmin role, but naturally that was disastrous, resulting in an instant R/3 crash (don't try this in production!), so I set it back the way it was (default).
    What's really strange is no matter how I try this from outside the R/3 system, it works perfectly, but from within R/3 it does not.  A search of SAP Notes, SDN forums, SAPFANS, Microsoft's KnowledgeBase, and MSDN Forums has not yielded quite the same problem (although that did lead me to learning about the "trustworthy" database property).
    Any insight someone could offer on this thorny problem would be most appreciated.
    Best regards,
    Matt

    Good news! We have got it to work. However, we did it in something of
    a backwards way, and I'm sure you'll laugh when you see how it was done. Also, the solution depends upon the fact that the remote server is still using SQL Server 2000, and so doesn't have quite so many restrictions placed upon it for distributed transactions and Linked Servers as SQL Server 2005 now does.
    At the heart of the solution is the fact that the Linked Server coming FROM the remote server TO our SAP system works fine. Finally, coupled with the knowledge that using DBCON on the SAP side to the remote server also does actually provide a connection (see Notes 323151 and 738371), we set up a roundabout way of achieving our goal. In essence, from ABAP, we set up the DBCON connection to the remote server, at which point all the Native SQL commands execute in the context of the remote server. From within that connection, we
    reference the tables in SAP via the Linked Server defined on the remote
    server, as if SAP were the remote server, selecting data from SAP and inserting it into the remote (but apparently local to this connection) tables.
    So, to spell it out, we define a Linked Server on the remote server pointing back to the SAP server as SAPSERV, with a SQL login mapping defined on the remote system pointing back to a SQL login in the SAP database. We also define a connection to the remote server from SAP using DBCON, using that remote SQL login for authentication.
    Then, in our ABAP code, we simply do something along the lines of
    exec sql.
       set connection 'REMOTE'
    endexec.
    exec sql.
       connect to 'REMOTE'
    endexec.
    exec sql.
       insert into REMOTE_TABLE
          select * from SAPSERV.SID.sid.SAP_TABLE
    endexec.
    exec sql.
       commit
    endexec.
    exec sql.
       disconnect 'REMOTE'
    endexec.
    This is, of course, a test program, but it demonstrated that it worked,
    and we were able to see that entries were appropriately deleted and inserted in the remote server's table. The actual program for use is a little more complex, in that there are about four different operations at different times, and we had to resolve the fact that the temp table SAP_TABLE was being held in a lock by our program, resulting in a deadly embrace, but our developer was able to work that out, and all is now well.
    I don't know if this solution will have applicability to any other customers, but it works for us, for now.
    SAPSERV, REMOTE, REMOTE_TABLE, and SAP_TABLE are, of course, placeholder names, not the actual server or table names, so as not to confuse anyone.
    Best regards,
    Matt

  • Calling Java API from ABAP using JCo

    I need to call Java API from ABAP & BSP also. For this I have got useful information related to JCo from following blog:
    /people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
    But, I am facing one problem. On executing Java program myExample5.java (recommended by Gregor Wolf) from command line I get following error message:
    Server JCOSERVER01 changed state from [ STOPPED ] to [ STARTED ]
    Exception in server JCOSERVER01:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu Apr 26 13:46:32 IST 2007.
    This is caused by either a) erroneous server settings, b) the backend system has
    been shutdown, c) network problems. Will try next startup in 1 seconds.
    Connect to SAP gateway failed
    Connect_PM  TPNAME=JCOSERVER01, GWHOST=gateway, GWSERV=3300
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       hostname 'gateway' unknown
    TIME        Thu Apr 26 13:46:32 2007
    RELEASE     640
    COMPONENT   NI (network interface)
    VERSION     37
    RC          -2
    MODULE      ninti.c
    LINE        336
    DETAIL      NiPGetHostByName2: hostname 'gateway' not found
    SYSTEM CALL gethostbyname_r
    COUNTER     1.
    Can anyone please help me out. Do I need to do any setting?
    I'll surely reward points.
    Thanks & Regards,
    Nilesh Kumar

    Hi Nilesh,
    From the error i think that the error is with the hostname.
    Please enter the the Application Server IP/Hostname.
    If you are loggin to SAP System "XX1" from SAP GUI. Then click the change Item tab and see Application server name/IP let say "XX2" for hostname or "xx.xx.xx.xx" for IP.
    Replace <i>srv[0] = new Server("gateway","sapgw00","JCOSERVER01",repository);</i>
    with <i>srv[0] = new Server("XX2","sapgw00","JCOSERVER01",repository);</i>
    If App Server is IP then replace with
    <i>srv[0] = new Server("xx.xx.xx.xx","sapgw00","JCOSERVER01",repository);</i>
    Let me know if it is throwing any error.
    Thanks,
    Prashil

  • Java from ABAP?

    Hello!
    How can I start (=call) a java program from ABAP? I have only .class and .java files.
    Thanks!

    Hi,
    Using the SAP Java Connector
    SAPu2019s new Java middleware, the SAP Java Connector (JCO) allows customers and partners to easily build SAP-enabled components in Java. JCO supports both inbound (Java calls ABAP) and outbound (ABAP calls Java) calls in desktop and server applications.
    Sample program
    Import statements: Any program using JCO should contain the following import statement:
    import com.sap.mw.jco.*;
    Otherwise, you have to fully qualify each class and interface which is very inconvenient.
    Connecting to SAP
    JCO.Client mConnection;
    A connection (or session) with SAP is handled by class JCO.Client
    try {
    mConnection =
    JCO.createClient("400", // SAP client
    "c3026902", // userid
    "********", // password
    "EN", // language
    "iwdf5020", // host name
    "00"); // system number
    mConnection.connect();
    catch (Exception ex) {
    ex.printStackTrace();
    System.exit(1);
    "A Client object is created via a call to createClient(). You can use a specific application server (as in the above code) or a server group (load balancing)." REFER the JCO Javadoc for the overloaded createClient() method for the latter possibility.
    "The Client class's connect () method tries to log on to SAP. If that fails for any reason, an exception is thrown. If the call succeeds, we can now stay connected for as long as we like. When we are done, we can call disconnect () to explicitly log off."
    Hope this sample would help you..
    Regards
    Narin Nandivada

  • Problem using webservice method consumer proxy with rawdata from abap

    Hello Gurus,
    I am struggling with an error using a proxy consumer service from ABAP. The proxy was generated using the WSDL from the web service provider. For a specific method we need to send a rawstring as seen bellow:
    The file to be sent on this call is a ZIP file XAdES-BES signed and on BASE64. I’ve implemented the proper code to get the original file from local PC, and convert it to BASE64 before moving the content to the webservice structure and call the service proxy. At SOAMANAGER I also configured the webservice and the proper port with the WSDL:
    The communication is working properly but my problem is with the binary content. When calling the webservice the response is that the structure of the file is wrong. I found it very strange since I used a tiny SOAPUI project with the same WSDL and it worked with no problem.
    After debugging I could see that the content moved to the rawdata string before calling the proxy does not match the content that I can see from the call payload on web services util (srt_util)!
    So the sample code for my method:
    * get the file from the specified folder
    call function 'GUI_UPLOAD'
    exporting
    filename                = ld_zipfilename
    filetype                = 'BIN'
    importing
    filelength              = zip_size
    tables
    data_tab                = t_zip_data[]
    exceptions
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    others                  = 17.
    * convert to string
    clear buffer_zip.
    call function 'SCMS_BINARY_TO_STRING'
    exporting
    input_length = zip_size
    importing
    text_buffer  = buffer_string
    tables
    binary_tab   = t_zip_data[]
    exceptions
    failed       = 1
    others       = 2.
    * encode base 64
    perform encode_base64 using buffer_string
    buffer_zip. 
    form encode_base64 using in_string type string
    out_string type xstring.
    data: l_sbuff     type string.
    * convert the file to BASE64
    call method cl_http_utility=>encode_base64
    exporting
    unencoded = in_string
    receiving
    encoded   = l_sbuff.
    call function 'SCMS_STRING_TO_XSTRING'
    exporting
    text   = l_sbuff
    importing
    buffer = out_string
    exceptions
    failed = 1
    others = 2.
    endform.                    "encode_base64
    calling the webservice:
    l_input-xxxx-dokument = buffer_zip.
    try.
    call method l_proxy_test->webservice
    exporting
    input  = l_input
    importing
    output = l_output.
    catch cx_ai_soap_fault into lr_exc_soap_fault.
        endtry.
    From my understanding rawstring should be the same as ABAP xstring. If I debug the program and check the content of the  l_input-dokument before calling the proxy I get binary content: “Izw/eG1sIHZlcnNpb249IjEuMCIgZW5jb2Rpbmc9InV0Zi04Ij8…” that is in fact correct
    If I check the payload after call I can see that the binary content sent on the XML is not the same, in fact it is totally different: ”SXp3L2VHMXNJSFpsY25OcGIyNDlJakV1TUNJZ1pXNWpiMlJw…” !!
    I’ve tried a lot of different conversions, changed configuration on the communication, port, etc and nothing seems to work. I really can’t figure out why the binary content on the call is not the same as I move to the webservice structure.
    If I use the project from SOAP UI and send the proper binary content, that is “Izw/eG1sIHZlcnNpb249IjEuMCIgZW5jb2Rpbmc9InV0Zi04Ij8…” it works perfectly and the response is successfully.
    Anyone has a clue what could be causing this?
    Appreciate any kind of input.
    Regards,
    João Silva Pinto.

    Anyone? Any clue would be appreciated.

  • Erro "Partner not reached" - web service from ABAP

    Hi.
    I wrote a a sample web service call from abap program from net.
    But, when I executed, i am getting error 404 resource not found, partner not reached.."Connection request from (19/1132/0) to host: www.webservicex.net, service: 80 failed (NIEHOST_UNKNOWN)"..
    Not sure if any settings need to be done before running this ABAP program..
    Pl let me know how to proceed further.
    Thanks & Regards
    Krish

    Hi,
    You should check if your server has internet access, may be there is a proxy who block the access.
    If you have a proxy you can configure your proxy settings via SMICM.
    Regards, Gilles.

  • Calling webservices from ABAP via https/ssl with p12 certificates.

    Hi all,
    I have a problem with calling an external webservice via HTTPS.
    I configured my system as indicate in the blog /people/jens.gleichmann/blog/2008/10/31/calling-webservices-from-abap-via-httpsssl-with-pfx-certificates but when I check the RFC connection the result is: ICM_HTTP_SSL_ERROR.
    I check the ICM monitor and this is the result:
    [Thr 11] Thu May 26 16:02:57 2011                                                                               
    [Thr 11] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL                                           
    [Thr 11]    session uses PSE file "/usr/sap/SV5/DVEBMGS10/sec/SAPSSLHTTPS1.pse"                                                
    [Thr 11] SecudeSSL_SessionStart: SSL_connect() failed                                                                          
      secude_error 536875072 (0x20001040) = "received a fatal SSLv3 handshake failure alert message from the peer"                 
    [Thr 11] >>            Begin of Secude-SSL Errorstack            >>                                                            
    [Thr 11] WARNING in ssl3_read_bytes: (536875072/0x20001040) received a fatal SSLv3 handshake failure alert message from the peer
    WARNING in ssl3_output_cert_chain: (12354/0x3042) No hierarchy certificate in FCPath                                           
    WARNING in reduce_FCPath_by_Issuer: (12354/0x3042) No hierarchy certificate in FCPath                                          
    [Thr 11] <<            End of Secude-SSL Errorstack                                                                            
    [Thr 11]   SSL_get_state() returned 0x000021d0 "SSLv3 read finished A"                                                         
    [Thr 11]   Server's List of trusted CA DNames (from cert-request message):                                                     
    [Thr 11]     #1  " certificate 1
    [Thr 11]     #2  " certificate 2
    [Thr 11]   SSL NI-sock: local=ip  peer=ip2                                                       
    [Thr 11] <<- ERROR: SapSSLSessionStart(sssl_hdl=6000000000652010)==SSSLERR_SSL_CONNECT                                         
    [Thr 11] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt.c 2012]
    SAP_ABA     700     0012     SAPKA70012     Componenti validi per tutte le applicazioni
    SAP_BASIS     700     0012     SAPKB70012     Componenti di base SAP
    PI_BASIS     2005_1_700     0012     SAPKIPYJ7C     PI_BASIS 2005_1_700
    ST-PI     2008_1_700     0001     SAPKITLRD1     SAP Solution Tools Plug-In
    SAP_BW     700     0013     SAPKW70013     SAP NetWeaver BI 7.0
    SAP_AP     700     0010     SAPKNA7010     Piatt. d'applicazione SAP
    CCM     200_700     0010     SAPK-27010INCCM     CCM 200_700 : Add-On Supplement
    SRM_PLUS     550     0010     SAPKIBK010     SRM_PLUS per mySAP SRM
    SRM_SERVER     550     0010     SAPKIBKT10     SRM_SERVER
    BI_CONT     703     0001     SAPKIBIIP1     Contenuto Business Intelligence
    ST-A/PI     01L_BCO700     0000          -     Servicetools for other App./Netweaver 04
    What do you think about it?
    Best regards,
    Norberto.

    Don´t forget to set your proxy settings! Be sure that the application server could establish a connection to the external server.
    From the BLog.
    Thr 11 WARNING in ssl3_read_bytes: (536875072/0x20001040) received a fatal SSLv3 handshake failure alert message from the peer
    From the Error.
    Have you looked into the above details?
    Thanks
    SM

  • Creating an xml file from abap code

    Hello All,
    Please let me know which FM do I need to execute in order to create an XML file from my ABAP code ?
    Thanks in advance,
    Paul.

    This has been discussed before
    XML files from ABAP programs

  • Create XML file from ABAP with SOAP Details

    Hi,
    I am new to XML and I am not familiar with JAVA or Web Service. I have searched in SDN and googled for a sample program for creating XML document from ABAP with SOAP details. Unfortunately I couldn't find anything.
    I have a requirement for creating an XML file from ABAP with SOAP details. I have the data in the internal table. There is a Schema which the client provided and the file generated from SAP should be validating against that Schema. Schema contains SOAP details like Envelope, Header & Body.
    My question is can I generate the XML file using CALL TRANSFORMATION in SAP with the SOAP details?
    I have tried to create Transformation (Transaction XSLT_TOOL) in SAP with below code. Also in CALL transformation I am not able to change the encoding to UTF-8. It's always show UTF-16.
    <xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" version="1.0">
      <xsl:template match="/">
        <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
          <SOAP:Header>
            <CUNS:HeaderInfo>
              <CUNS:InterfaceTypeId>10006</InterfaceTypeId>
              <CUNS:BusinessPartnerID>11223344</BusinessPartnerID>
              <CUNS:SchemaVersion>1.0</SchemaVersion>
              <CUNS:DateTime>sy-datum</DateTime>
            </CUNS:HeaderInfo>
          </SOAP:Header>
          <SOAP:Body>
            <xsl:copy-of select="*"/>
          </SOAP:Body>
        </SOAP:Envelope>
      </xsl:template>
    </xsl:transform>
    In ABAP program, I have written below code for calling above Transformation.
      call transformation ('Z_ID')
           source tab = im_t_output[]
           result xml xml_out.
      call function 'SCMS_STRING_TO_FTEXT'
        exporting
          text      = xml_out
        tables
          ftext_tab = ex_t_xml_data.
    Please help me how to generate XML file with SOAP details from ABAP. If anybody have a sample program, please share with me.
    Is there any easy way to create the XML file in CALL Transformation. Please help.
    Thanks

    Try ABAP forum, as it seems not to be PI related.

  • Data import from EBS failed via FDMEE in fdm . Getting error message as "Error connecting to AIF URL.

    FDM Data import from EBS failed via FDMEE after roll back the 11.1.2.3.500 patch . Getting below error message in ERPI Adapter log.
    *** clsGetFinData.fExecuteDataRule @ 2/18/2015 5:36:17 AM ***
    PeriodKey = 5/31/2013 12:00:00 AM
    PriorPeriodKey = 4/30/2013 12:00:00 AM
    Rule Name = 6001
    Execution Mode = FULLREFRESH
    System.Runtime.InteropServices.COMException (0x80040209): Error connecting to AIF URL.
    at Oracle.Erpi.ErpiFdmCommon.ExecuteRule(String userName, String ssoToken, String ruleName, String executionMode, String priorPeriodKey, String periodKey, String& loadId)
    at fdmERPIfinE1.clsGetFinData.fExecuteDataRule(String strERPIUserID, String strDataRuleName, String strExecutionMode, String strPeriodKey, String strPriorPeriodKey)
    Any help Please?
    Thanks

    Hi
    Getting this error in ErpiIntergrator0.log . ODI session ID were not generated in ODI / FDMEE. If I import from FDMEE its importing data from EBS.
    <[ServletContext@809342788[app:AIF module:aif path:/aif spec-version:2.5 version:11.1.2.0]] Servlet failed with Exception
    java.lang.RuntimeException
    at com.hyperion.aif.servlet.FDMRuleServlet.doPost(FDMRuleServlet.java:76)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Maybe you are looking for

  • Final Cut Pro X and Masks

    Just downloaded FCPX, and I have two tracks in my storyline - a background clip and a foreground PNG image.  'm trying to apply a mask to the foreground PNG image.  I double-click on the Mask effect, and I see the Mask handlers, but I'm unable to mov

  • [JS CS3] Metadata getProperty path

    Hi, How to get the values of the members in a container in the metadata? I created my own xmp-document which contains this fragment: A B I tried this code: myMetadatPreferences.getProperty("http://www.kvd.fake/ns#", "kvd:a/rdf:Seq/rdf:li[1]"); But is

  • HT201412 All my Apps. are automatically shutting off when I try to use them, how do I get them to work again?

    All my apps. are automatically shutting off when I try to use them..  They were working just fine yesterday, and today they just kick me back to my home screen!  How do I get them to start working again.  And my sleep/wake button is broken...  so how

  • DIFF BETWEEN AR DPINV AND AR DPREQ

    Hi All Can anybody please tell me the differance between AR Downpayment Invoice and AR Downpayment  Request. please throw some light on it warm rgs anand

  • Building DVD from DVD folder

    I ma having some problems archiving my Encore project. My workflow was as follows: I have successfully burned a DVD disk from Encore. I then built a DVD folder and this seemed to work - indeed the resulting files work fine in PowerDVD. I then tried t