Initial Load from ABAP Failed

Hi.
Initial load from ABAP described in following PDF document failed.
Identity Management for SAP System Landscapes: Configuration Guide
http://service.sap.com/~sapidb/011000358700001449662008E
System log Error
lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [C:\WINDOWS\system32\sapjcorfc.dll: Can't find dependent libraries]. java.library.path [C:\Program Files (x86)\Java\j2re1.4.2_16\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32;C:\WINDOWS;......
Environment is
IdM 7.1
NW AS JAVA 7.0 SP 17
Windows 2003 Server 64bit
SQL Server
Any help will be most appreciated !

Hi You Nakamura,
We are facing the same problem during AS ABAP - initial load with the same error message.
I downloaded the msvcp71.dll file and placed it in System32 folder. But the problem remains the same (even after server restart).
The system log shows the same error message and no entries in job log.
Please let me know if you had followed any different way to install the dll file.
Regards,
Vijay.K

Similar Messages

Golden Gate Initial load from 3 tb schema

Hi
My source database is 9i rdbms on solaris 5.10. I would like to build 11gR2 database on oracel Enterprise linux .
How can i do the initial load of 3tb size schema , from my source to target ( which is cross platform and different version of rdbms)
Thanks

Couple of options.
Use old export/import to do the initial load. While that is taking place, turn on change capture on the source so any transactions that take place during exp/imp timeframe are captured in the trails. Once the init load is done, you start replicat with the trails that have accumulated since exp started. Once source and target are fully synchronized, do your cutover to the target system.
Do an in-place upgrade of your 9i source, to at least 10g. Reason: use transportable tablespaces (or, you can go with expdp/impdp). If you go the TTS route, you will also have to take into account endian/byte ordering of the datafiles (Solaris = big, Linux = little), and that will involve time to run RMAN convert. You can test this out ahead of time both ways. Plus, you can get to 10g on your source via TTS since you are on the same platform. When you do all of this for real, you'll also be starting change capture so trails can be applied to the target (not so much the case with TTS, but for sure with Data Pump).

Initial load from CRM to CDB

Hi,
I'm trying to do the initial download from CRM to CDB for a mobile scenario, using the transaction R3AS.
In this transaction, I'm selecting the load object, Source site, but unable to select the destionation site as CDB. Is there any configuration needs to be done before we do the initial download?
And important point is that there is an entry for CDB in the table SMOHSITEID.
Please help me in this regard.
Regards,
Praveen

HI
Praveen you forgot the basic thing is you need to create a site in CDB also
the site you created previously for crm data base not for cdb as u also know cdb is connected to crm data base through middleware first you create site, subscription, publication in in cdm also later start down loading R3as before golive if your mobile clients are already live use R3AC4 delta again you have to set up filters and parallel processing for reduce the down loading time
Reward with Points if Helpful
Venkat

Time-out in 0CRM_SRV_IBASE_ATTR initial load from CRM5.0

Hi All,
we are facing the following problem.
On our staging system an initial load of the 0CRM_SRV_IBASE_ATTR extraction times out in the source system. Strange thing is that this same extraction does work in our development system...
When i start the infopackage with the same parameters as in the dev system (in background, PSA and datatargets parralel, datas default data transfer settings) and check the source system, the job is running in background on dev, but as dialog on staging!!
Does anybody know how we can solve this issue?
Kind regards
Immanuel

Hi,
In which system ur chking in?
In BI system it occupies dialog only, but in R/3 system it shuld go in BKGD....
So chk in R/3 system, if still in R/3 it runs in dialog once chk the USERNAME on which the job in running whether he was permitted to run in BKGD...here i mean chk the permissions for tht user...
As said u can chk with BASIS....
rgds,
Edited by: Krishna Rao on May 13, 2009 2:11 PM

Initial load from ECC/R3 to MDM

Hi,
Could any one tell me the process for one time intial load from R3 to MDM.
preferably without XI.
how to extract data from R3 ?
what format?
how to map source to MDM repository?
Farah

Hi Farah,
There are two transactions to extract the data from R/3
MDMGX - For Extracting Lookup data
MDM_CLNT_EXTR - For Extracting Main table data
MDMGX Steps:
1.Go to transaction MDMGX.
2. Define Object Types: There are some standard object defined in MDMGX, you can use from them as per your requirement and you can also create the new objects.
3. Define Repositories and associate it with the object created in the previous step.Also add the FTP Server details.
4. Maintain Ports and Check tables: Add the Codes of the ports and select the corresponding table from where you want to extract the data.
5. Generate XSD: to generate the XSD file to use in console while creating port.
6. Start Extraction: To Extract the data from the R3 to MDM via FTP Server.
MDM_CLNT_EXTR steps:
Refer the below link that contains the entire configuration needed to extract the Main table data.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50260ae5-5589-2910-4791-fc091d9bf797]
Regards,
Jitesh Talreja

Initial Load - AS ABAP - getting only user with a group

Hi,
when i start initial load, i just get users with groups. Is that standard?
Br,
Philip

First of all - you'll need to familiarize yourself with the database for effective learning and debugging. I'm talking about the MS-SQL or Oracle-DB where you installed the IC-schema. It often helps me to understand whats going on behind the scenes.
Secondly - I read some of your posts - I would advise you to install the dispatcher and everything on the server where the DB is hosted - at least as long as you're in development. The MMC can still be on your local pc/laptop, although some things won't work well there (Import, Dispatcher-Status, ...). This'll ease things a lot I suppose.
About the service-user... SAP delivers a role you can import into PFCG (SAP_BC_SEC_IDM_.SAP-File in misc-folder of installation media). This role should be sufficient for your communication user, is updated every now and then and contains only the necessary permissions. Maybe you'll have to extend it (Z_SAP_) in case you want to read special tables not supported by the SAP framework (e.g. license data).
I can hardly believe that the current role assigned to your user only has permissions to users with groups != empty
By now I have no clue why you only see users in IdM with groups assigned in SU01... look up the SQL-table I mentioned if there are more users.
BR
Michael

Acess to SLD from ABAP fails

Hi all,
When i go to visual admin of the server,SLD data supplier service & try CIM client test i get the followig error :
"Failed to generate and test CIMOMClient object."
When i try to trigger SLD data transfer i get following error :
"Operation Failed! Failed to collect SLD data. Software caused connection abort: socket write error"
Please let me know how to resolve this

Hi Rajagopal,
Check this link till end
Re: Centralise System Landscape Directory
Re: Error while opening sld page of server
Thanks!

Error AS ABAP initial load

At my initial load AS ABAP, the following error showed up:
putNextEntry failed storingS_A.SHOW
Exception from Add operation:com.sap.idm.ic.ToPassException: ToIDStore.addEntry failed storing entry 'S_A.SHOW'. IDStore returned error message: " No such attribute:Attribute: ACCOUNTM23_ME5" when storing attribute 'ACCOUNTM23_ME5=S_A.SHOW'
Exception from Modify operation:com.sap.idm.ic.ToPassException: ToIDStore.modEntry failed updating entry 'S_A.SHOW'. IDStore returned error message: "Entry does not exist" when fetching entry
This error message affects all users. Where can I add the missing attributes?
Thanks for your help!!!

Gerhard,
Could you please share the solution?
Thanks.

Initial Load for Master Data from R/3 to CRM

Hi Middleware Experts,
I have an ambiguity on initial load of enhanced master data from R/3 to CRM. The current situation is
1)I have already enhanced master data on R/3 side with some additional fields. Now shall i go ahead with standard intial load of these Master data to CRM without creating middleware interfaces to map those enhanced fields on CRM side?
2)Also after doing initial load from R/3 to CRM, if I develop middleware interfaces for mapping these new fields of master data and then again do the initial load, so that new fields also get mapped, will the initial load be done properly as i have already done it once? will it overwrite the previous initial load data on CRM side properly?
Please suggest whether it can be done or not and which is the better option.
Regards,
Rahul

Hi Rahul,
Since you have not done the mapping yet the middleware will not bring those fields to CRM it will work just like a standard initial load without considering the enhanced master data field.
When you develop the middleware interface and enhance the CRM data structure also and then you can see the exchange of those fields through MW. You can start the intial load at that time also its not that you can do the initial load just once. But the better option would be that you avoid doing initial load several times because its time consuming activity. You do all the enhancement and then finally perform the initaial load.
<b>Allot points if my post helps!!</b>
Best regards,
Vikash.

Regarding Initial load for CUA

we are testing CUA migration in IDM7.0 version.
Already below systems exists in my place
1)IDM7.0
2)CUA System(ABAP)
3)ABAP systems(Child for CUA system)
Now how to integrate CUA with IDM7.0 and Migrate CUA User information. Instead of Connecting each abap system with IDM, we plan to connect CUA and take all the data to IDM.
so how to do this? Executing Initial load for CUA system will solve this problem ? or any particular process available.
please suggest us.
regards

hi mathew,
thanks for your reply
Actually our initial step is to find to what extend CUA system information can be taken ove(Migrate) to IDM.
I feel It would be better to take all the Child system user info from CUA at one point rather than connecting each abap system with IDM. so that i can disconnect CUA once IDM is established.
So wondering how to integrate CUA system with IDM7.0, Executing Initial load for CUA system is same
as executing initial load fo ABAP system.
please shed light on this.
regards

Portal Initial Load

Good Afternoon
I have managed to get the portal initial load working, and it is pulling all the requseted attributes i.e.
ATTRIBUTES displayname,email,fax,firstname,islocked,lastname,logonname,mobile,telephone,uniquename,
validfrom,validto,timezone,password,ispassworddisabled,objectclass,datasource,locale,securitypolicy,certificate,
companyid,city,country,pobox,zip,state,department,position,accessibilitylevel
However I also need to pull the attribute that stores the mapped user id, which is found in the User Mapping for System Access Tab. I cannot find out what the name of this attribute is or whether it exists in the same table. Does anyone know?
I need this attribute because an ldap backend is used for portal, and ldap does not use the same username as sap backend.
Cheers
Leo

Hi Leonard
Quite complex, isn't it?!
From what I understood:
As I think there's no SPML-attribute that matches your self-created LDAP-attribute "ABAP_username". As you said you need to map the Portal-userID to the IDS-MSKEYVALUE, which is your numeric ABAP-user.
Maybe you could do an initial load from the LDAP-System as well, but only into a temporary database table (lets say LDAPTempDB) so you have the LDAP-username AND the ABAP-username in the database. You don't write the LDAP-data to the Identity Store, of course.
In the Source-tab of the WriteLocalUsers (AS Java Load) you could then insert a more complex SELECT statement that returns not only the data from the ReadLocalJavaUsers-table but also from the LDAPTempDB.
Example PseudoCode:
SELECT P.*, L.ABAPID from PortalTempDB as P, LDAPTempDB as L WHERE Portal.UserID = LDAP.UserID
In the Destination-tab of the WriteLocalUsers you can then access the LDAP.ABAPID in the MSKEYVALUE column.
This solution contains extra-work because you have to keep an additional table up-to-date....
An easier way would be if you include the LDAP in your IdM-Provisioning as well?! Then this extra-work has to be done anyway.
Hope this helps?!
Regards
Michael

Initial Load of LDAP Groups

I am running an initial load from LDAP using the template job.
The users have been successfully loaded into the Id store table but the group read pass does not do anything.
What should the source and destination tabs look like for the Read groups pass.
Thanks
S.

Hi
In my case the InitialLoad-Jobs for ADS/LDAP had some information missing in the pass "ReadGroupOfUniqueNamesFromLdap".
In the Source-Tab the LDAP URL should look like this:
LDAP://%$rep.LDAP_HOST%:%$rep.LDAP_PORT%/%$rep.LDAP_STARTING_POINT_GROUPS%?*?SUB?%$rep.LDAP_FILTER_GROUPS%
For that you should create additional repository-constants "LDAP_FILTER_GROUPS" and "LDAP_STARTING_POINT_GROUPS" which look like this in my case:
LDAP_FILTER_GROUPS=(objectclass=group)
LDAP_STARTING_POINT_GROUPS=ou=groups,ou=idm,dc=example,dc=com
I didn't change anything at the Destination-tab.
Hope this helps...

Handling password while initial load process

Dear Experts,
This is about password handling in IDM. While doing initial load, I do not want to bring passwords from my target systems (AD/SAP) into IDM.
So which password(s) the users will use to login into target systems (AD/SAP) after initial load ? What can be achieved with pass "update system privilege trigger attribute" which is available in initial load job ?
Is it something like, IDM creates a default password on initial load which is sent back to target systems(from which initial load was done) which changes the password for the target systems to this new default password ?
Can we handle this default password being sent to target systems with the help of this pass "update system privilege trigger attribute" in initial load? so that this default password is not sent to target systems ??
So if the default password is not sent back to target systems after initial load, then users will keep using their existing passwords for their login in the target systems. After that, If I need to assign UMEJAVA only privilege to the users, the password for the target systems will be changed with the default password being sent on email to the users. Since the password on AD is now changed, how the users gonna login into AD to check their emails for the
new password ?
It seems I have written a BIG query here .... sorry for that. But please let me know if any thing above does not make any sense.
Also please share your views/expertise/best practice on the same.
Many thanks in advance!
Naveen
Version: IDM 7.2

Hi Naveen,
Firstly to answer your query on what basis we decide he backend type for your UMEJAVA repository, its the business. If you want users to authenticate against AD, when they try to login to IDM UI, you have to configure the LDAP as backend and you have to choose datasource as Microsoft ADS (Deep Hierarchy) + Database (ume database).
If you want the Users to authenticate against UME database, by default ume points to UME database and you need to create the users in the UME database.
So, if you have configured AS JAVA with ADS+Database, in IDM you have to select the repository as SAP netweaver as Java (ldap backend)
In the repository constants, there is an attribute called BACKED_REPOSITORY which should be your AD repository name that is configured.
If you have a look at the AS JAVA connectors in the provisionign framework, in the create user plugin, IDM first checks for backend type. If it is LDAP backend, it just sets the JAVA account attibute, If the backend type is DB, IDM will create the user in the UME database.
Considering your system details, i would suggest you the below approach.
1. Configure your UMEJAVA with Microsoft ADS (Deep Hierarchy) + Database (ume database). For more information on how to configure your
UMEJAVA with LDAP backend refer to this link
2. So, now the users who try to login to IDM UI or any app on AS Java, will be authenticated against your active directory.
3. Perform the initial load from HR.
4. Perform the initial load from AD.
5. Perform the initial load from you AS UMEJAVA.
6. Now, all the user information/role assignment information is loaded to IDM.
7. Now lets discuss about password management. There are two things here
a. Change password (by user) - User changes password in IDM --> password changes are provisioned to AD and user can login with new password.
b .Password reset self service. - User resets password in IDM --> password changes in AD (as UME is configured to use AD)
Change password (by user)
By default the users who are successfully authenticated when they try to login to IDM UI, will get access to self-services tab. To allow users to change the password on their own, you create the corresponding ordered tasks and maintain the access control tab for selfservice.
So that when users wants to change their passwords, they can change on their own.
How IDM will provision the new password to target system is something you have to configure the logic. For example, my sandbox looks like this.
Password reset self-service.
The user can reset their password on their own if they cannot remember their password. To implement this, look at this document. http://scn.sap.com/docs/DOC-17111
Hope this helps. please let me know for any further queries.
~ Krishna.

Document currency is blank in 2nd ODS after loaded from 1st ODS!

1st ODS contains the document currency field and each record does have the value for it. In the update rule from 1st ODS to 2nd ODS, there is only two fields populated, one is the document currency (the update type is Overwrite for this unit and there are only two update types for this unit: one is Overwrite and the other one is No Update), the other one is a KF field and it's update type is Addition. After performing the initial load from 1st ODS to 2nd ODS, the KF field values are fine, but the Document Currency value is blank for each record. The Document Currency field in the update rule takes the update method of Source field from 1st ODS.
Any clue on why this Document Currency is blank in 2nd ODS and any solution?
Thanks!

hi Ravi,
There should be no any transfer rule from one ODS to another. In the update rule, our 1st post has already clearly stated that the update type is Overwrite for Document Currency. Sorry, we can't give you any reward points since you didn't carefully read our post!
Thanks

Initial Load ISU / CRM Issues

Hi all
I have a few questions.
1. When you start an initial load for BUPA_MAIN in R3AS (from ISU to CRM) it seems only 1 DIAG WP is used (SM50). Is this normal?
2. In R3AM1 you can monitor the objects. Everything seems to be loaded but yet the status is still 'Running', is this because of BDoc validation errors?
Kind regards
Lucas

Hello Lucas,
There's a param(CRM_MAX_QUEUE_NUMBER_INITIAL) you can maintain in the table CRMPAROLTP of the source system(maintain this in the ERP system if you're doing an initial load from ERP to CRM)
Reference Notes:
350176
765236
The parval1 for Parameter CRM_MAX_QUEUE_NUMBER_INITIAL should be an integer(lets say 5) instead of a character 'X'. In such a case 5 queues would be formed for initial load.
Here's an example :
Parameter name CRM_MAX_QUEUE_NUMBER_INITIAL
Param. Name 2   <Object name>    " for example CUSTOMER_MAIN
Param. Name 3
User            <User>           " for example CRM, if CRM is connected
Param. Value    <no. of queues> " for example 5
Param. Value 2
So using the example above 5 R3AI_CUSTOMER_MAIN queues would be formed on the ERP and sent to CRM for processing.
The no. of available dialog work processes in SM51 available to the qRFC scheduler in CRM system should be able to handle the parallel processing of queues. So consult your basis administrators on this front.
Regards,
Rohit

Initial Load from ABAP Failed

Similar Messages

Maybe you are looking for