ACL test for UDP

Hi,
I am situated at XYZ location and want to access application on server at another location ABC. The application would be a UDP based application and I am not sure that all the hops have that UDP port open or not.
Since its a UPD not TCP so I cannot even check by telnet using that port no, also its not possible to coordinate with each of the site for this port number.
Its there any way to check UDP port being open at all the hops, and if its is blocked it is blocked at which end.
Thanks,
Deepak

Hi Deepak
I think you can use the NMAP application. NMAP has an option for UDP ping. That should solve your problem.
See the following link for more.
http://www.networkuptime.com/nmap/page4-6.shtml
Perhaps you can also use 'UDP ping' application.
Here is a link to one.
http://www.hotscripts.com/Detailed/23153.html
Hope it helps. Please rate the post.

Similar Messages

Nternal ERROR: Can not find the ACL containter for object ...

We are using OWB 10.2.0.3. We tried to introduce two basic roles to prevent user A from accessing certain parts of our project. Somehow (I cannot really say how) we ended up in the error message below whenever we want to modify the security properties of an object.
Neither in metalink nor in the oracle forums I could find any hint about that error.
Can anyone help??
Thanks in advance, Maren
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
     at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:166)
     at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2743)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:820)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1449)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:649)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:660)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:623)
     at oracle.wh.ui.common.WhSecurityHelper.securityCheck(WhSecurityHelper.java:112)
     at oracle.wh.ui.console.commands.EditObjectCmd.performAction(EditObjectCmd.java:107)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

Hi Maren
Like you I get this error and do not know what steps caused it.In my scenario I have some mappings that give the error and some that do not - the repository user gets the error but the repository owner does not.
Thinking back over the last number of months (as this project contains 7-8 months od work - we do have exports of the project) I think the ones giving the error are those that perhaps were copied from another to start the coding but I cannot be sure.
I have read the metalink note mentioned above as well as the the queries posted by Oleg and yourself. The queries posted are slightly different, one has a where clause
fco.classname = 'CMPACLContainer' (Maren's)
and the other
fco.classname='CMPMap' (Oleg's).
Was this intentional Maren on your behalf for your problem to be fixed?
We are using 10.2.0.3.33 OWB client and 10.2.0.3.0 OWB repository.
Thanks
Edwin

XI testing for two SAP R/3 systems with same system id/logical system

Hi
We are currently in the process of upgrading our R/3 4.7 to ECC 6.0 and plan to maintain dual landscape for DEV & QA (4.7 & ECC 6.0) for a period for testing and maintaining existing applications for fixes etc. The second DEV & QA (upgraded to ECC 6.0) are copy of respective systems and these systems are created automatically under technical systems in SLD by auto update (RZ70).
The question is, can we use the same XI system for testing inbound/outbound interfaces for both the systems i.e 4.7 & ECC 6.0 at the same time. I am aware of the fact that XI Technical/Business sytems dependent on unique logical systems, so we cannot create new business system for the upgraded DEV-II ECC 6.0 system.
For your information, we have two slds (one for XID/XIQ and second one for XIP).
What are the options without disturbing & maintaining the current XI system set up?
1) Can we change current Business systems e.g DEV010 to use new technical system i.e DEV-II ECC 6.0 for testing for a period and switch it back to DEV-I 4.7 technical system?
2) or change logitical system name of DEV-II ECC 6.0 and create new business sytem in SLD without interfering the existing setup and modify/create interfaces to use this new business system?
3) Do we need to refresh cache from time to time in XI ?
4) Any other implications
We will be upgrading XI to PI 7.1 after ECC 6. 0 Upgrade.
Any views on this would be highly appreciated.
Regards
Chandu

Hi
Technical System was created in the SLD automatically after RZ70 configuration in the new DEV-II system. We then modified Business System to use the new Technical system and carried out following steps:
1)     Original Idoc metadata was deleted from XID
2)     The port definition was deleted
3)     A new port definition was created for new system
4)     The metadata for each idoc type used was re-created in IDX2 , using METADATA -> CREATE
5)     This brought in all known versions of the idoc segments, including the 7.1 version.
I have already checked the guides suggested for our upgrade and we are thinking of going ahead with fresh installation and migrating the interfaces.
Regards
Chandu

How to test for différent Select into a single PL/SQL block ?

Hi,
I am relatively new to PL/SQL and I am trying to do multiple selects int a single PL/SQL block. I am confronted to the fact that if a single select returns no data, I have to go to the WHEN DATA_NOT_FOUND exception.
Or, I would like to test for different selects.
In an authentification script, I am searching in a table for a USER ID (USERID) and an application ID, to check if a user is registered under this USERID for this APPLICATION.
There are different possibilities : 4 possibilities :
- USERID Existing or not Existing and
- Aplication ID found or not found for this particular USERID.
I would like to test for thes 4 possibilities to get the status of this partiular user regardin this application.
The problem is that if one select returns no row, I go to the exception data not found.
In the example below you see that if no row returned, go to the exception
DECLARE
P_USERID VARCHAR2(400) DEFAULT NULL;
P_APPLICATION_ID NUMBER DEFAULT NULL;
P_REGISTERED VARCHAR2(400) DEFAULT NULL;
BEGIN
SELECT DISTINCT(USERID) INTO P_USERID FROM ACL_EMPLOYEES
WHERE USERID = :P39_USERID AND APPLICATION_ID = :APP_ID ;
:P39_TYPE_UTILISATEUR := 'USER_REGISTERED';
EXCEPTION
WHEN NO_DATA_FOUND THEN
:P39_TYPE_UTILISATEUR := 'USER_NOT_FOUND';
END;I would like to do first this statement :
SELECT DISTINCT(USERID) INTO P_USERID FROM ACL_EMPLOYEES
WHERE USERID = :P39_USERID Then to do this one if the user is found :
SELECT DISTINCT(USERID) INTO P_USERID FROM ACL_EMPLOYEES
WHERE USERID = :P39_USERID AND APPLICATION_ID = :APP_ID ;etc...
I basically don't want to go to the not found exception before having tested the 4 possibilities.
Do you have a suggestion ?
Thank you for your kind help !
Christian

Surely there are only 3 conditions to check?
1. The user exists and has that app
2. The user exists and doesn't have that app
3. The user doesn't exist
You could do this in one sql statement like:
with mimic_data_table as (select 1 userid, 1 appid from dual union all
                          select 1 userid, 2 appid from dual union all
                          select 2 userid, 1 appid from dual),
-- end of mimicking your table
         params_table as (select :p_userid userid, :p_appid appid from dual)
select pt.userid,
       pt.appid,
       decode(min(case when dt.userid = pt.userid and dt.appid = pt.appid then 1
                       when dt.userid = pt.userid then 2
                       else 3
                  end), 1, 'User and app exist',
                        2, 'User exists but not for this app',
                        3, 'User doesn''t exist') user_app_check
from   mimic_data_table dt,
       params_table pt
where pt.userid = dt.userid (+)
group by pt.userid, pt.appid;
:p_userid = 1
:p_appid = 2
    USERID      APPID USER_APP_CHECK
         1          2 User and app exist
:p_userid = 1
:p_appid = 3
    USERID      APPID USER_APP_CHECK
         1          3 User exists but not for this app
:p_userid = 3
:p_appid = 2
    USERID      APPID USER_APP_CHECK
         3          2 User doesn't exist

How to test for existence of AcroXFA test objects?

Hi -
I'm writing scripts to test an XFA form with dynamic subforms. For example, at the end of Part 4, the user hits a Validate button, and if their data is correct, then the Validate button disappears and a Part 5 subform appears.
So my script looks something like this:
Function GetButtonPart4Validate()
   Set GetButtonPart4Validate = PDFDoc("TestForm").AcroXFAForm("form").AcroXFAForm("form1")
.AcroXFAForm("sfPart4").AcroXFAButton("sfValidate")
End Function
Function GetPart5()
   Set GetPart5 = PDFDoc("TestForm").AcroXFAForm("form").AcroXFAForm("form1").AcroXFAForm("sfPart5")
End Function
GetButtonPart4Validate().Click
PDFDoc( "TestForm" ).WaitProperty "ready", true, 60000 ' Wait for event processing complete
If DataTable("boolValidates", dtLocalSheet) = "TRUE" Then
     If( GetPart5().Exist ) Then
          ' A: Checkpoint Succeeds: Validation was successful
     Else
          ' B: Checkpoint fails: Validation failed
     Endif
Else
     If( GetPart5().Exist ) Then
          ' C: Checkpoint Fails: Validation was unexpected
     Else
           ' D: Checkpoint Succeeds: Validation failed as expected
     Endif
Endif
Unfortunately it appears that XfaSubForm.Exist always returns TRUE. In other QTP testing domains (eg "Exist Property (WinObject)" in QTP Help), the documented behaviour of the Exist property is to be true if the desired test object can be found in the application-under-test. Typically this means that when the script tries to access an XFA widget which doesn't exist (even something like GetPart5().getROProperty("visible") ), the script stops and thinks for a minute or so, and eventually produces a test error that the object doesn't exist then muddles onward. It is the "stops and thinks for a minute or so" which frustrates me, since these are delays which I am trying to avoid.
Another possible angle I looked into was counting the subforms under Part 5's parent.
PDFDoc("TestForm").AcroXFAForm("form").AcroXFAForm("form1").RefreshObject
PDFDoc("TestForm").AcroXFAForm("form").AcroXFAForm("form1").AcroXFAForm("sfPart5").Refresh Object
' check to see if there is a 'sfPart5'
Dim MyChildren, i
Set MyChildren = PDFDoc("TestForm").AcroXFAForm("form").AcroXFAForm("form1").ChildObjects
For i=0 to MyChildren.Count - 1
    print i & " name=" & MyChildren(i).GetROProperty("name")
Next
This also seems to fail: Part5 doesn't appear among its parent's children (at least before QTP actually tries to use it).
The PDF Test Toolkit User Guide doesn't specifically mention that Exist or RefreshObject or ChildObjects are implemented, so I can't say AcroQTP isn't working as designed, but if you're looking for suggestions for improvement, I'll vote for fulfilling these parts to the QTP. Please confirm my conclusions that these are not properly implemented, or whether I'm missing something.
In the meantime, do you have any recommendation on how to proceed? My present workaround is to look for a "validation error" windows dialog that indicates Part 5 won't exist, but this won't work in future test scripts.
Cheers,
Brent

Hi,
816387 wrote:
... QUERY:- Find all customers who have at most one account at the Perryridge branch.
SOLUTION *1* :-
select customer_name
from depositor,account
where account.account_number=depositor.account_number and
branch_name='Perryridge'
group by customer_name
having count(account.account_number) <=1
ok running correctly
That finds customers who have exactly one account at Perryridge.
The assignment is to find customers who have at most one account at Perryridge. You need to include customers with 0 accounts at Perryridge, as well. You could use an outer join, or MINUS, or a NOT IN subquery, or a NOT EXISTS sub-query (as mentioned above) to do that.
Can there be customers who have no accounts at all, at any branch? If so, you'll need to use the customer table in this problem, as well as depositor and account.
>
SOLUTION *2* :-
select D1.customer_name
from depositor D1
where unique
(select customer_name
     from depositor D2,account A1
     where D1.customer_name=D2.customer_name
          D2.account_number=A1.account_number and
          branch_name='Perryridge'
gives error:-
where unique
..........*^*
ERROR at line 3:
ORA-00936: missing expression
Logic of both solution are correct . But Solution 2 gives error in oracle. I want unique construct to work.Sorry, it doesn't in Oracle. I don't know of anything like that in Oracle.
Does "WHERE UNIQUE (SELECT ...)" work in some other database system? Which?
How to do it. Or How can i test for the absence of duplicate tuples ??????
Your Solution 1 is the best way to find customers with exatly 1 account (rather than 0 or 1 accounts) at Perryridge. Is there any reason why you wouldn't want to use it, if you ever needed to find customers with exactly one account there?

Testing for IS NOT NULL with left join tables

Dear Experts,
The query is showing the NULL rows in the query below....
Any ideas, advice please? tx, sandra
This is the sql inspector:
SELECT O100321.FULL_NAME_LFMI, O100321.ID, O100404.ID, O100321.ID_SOURCE
, O100404.NAME, O100321.PERSON_UID, O100404.PERSON_UID, O100404.VISA_TYPE
FROM ODSMGR.PERSON O100321
, ODSMGR.VISA O100404
WHERE ( ( O100321.PERSON_UID = O100404.PERSON_UID(+) ) ) AND ( O100404.VISA_TYPE(+) IS NOT NULL )

Hi Everyone,
I am understanding alot of what Michael and Rod wrote.... I am just puzzled over the following:
the query below is left joining the STUDENT table to
HOLD table.
The HOLD table - contains rows for students who have holds on their record.
a student can have more than one hold (health, HIPAA, basic life saving course)
BUT, for this query: I'm only interested that a hold exists, so I'm choosing MAX on hold desc.
Selecting a MAX, helps me, bec. it reduces my join to a 1 to 1 relationship, instead of
1 to many relationship.
Before I posted this thread at all, the LEFT JOIN below testing for IS NOT NULL worked w/o
me having to code IS NOT NULL twice....
Is that because, what's happening "behind the scenes" is that a temporary table containing all max rows is being
created, for which Discoverer has no predefined join instructions, so it's letting me do a LEFT JOIN and have
the IS NOT NULL condition.
I would so appreciate clarification. I have a meeting on Tues, for which I have to explain LEFT JOINS to the user
and how they should create a query. I need to come up with rules.
If I feel "clear", I asked my boss to buy Camtasia videocast software to create a training clip for user to follow.
Also, if any Banner user would like me to email the DIS query to run on their machine, I would be glad to do so.
thx sooo much, Sandra
SELECT O100384.ACADEMIC_PERIOD, O100255.ID, O100384.ID, O100255.NAME, O100384.NAME, O100255.PERSON_UID, O100384.PERSON_UID, MAX(O100255.HOLD_DESC)
FROM ODSMGR.HOLD O100255, ODSMGR.STUDENT O100384
WHERE ( ( O100384.PERSON_UID = O100255.PERSON_UID(+) ) ) AND ( O100384.ACADEMIC_PERIOD = '200820' )
GROUP BY O100384.ACADEMIC_PERIOD, O100255.ID, O100384.ID, O100255.NAME, O100384.NAME, O100255.PERSON_UID, O100384.PERSON_UID
HAVING ( ( MAX(O100255.HOLD_DESC(+)) ) IS NOT NULL )
ORDER BY O100384.NAME ASC

Portmap translation creation failed for udp src inside dst inside

Hi!
I have a problem with allowing traffic to UC500 subnets on ASA 5505 inside interface.
My asa is a main router with addres 192.168.1.1
UC500 voip box is connected to ASA's inside interface through UC500 WAN port with UC500 with 192.168.1.2 address.
Firewall and NAT on UC500 is disable
UC500 sip traffic works fine. voipbox creates its subnets for data and voip - 192.168.10.0 and 10.1.1.0. another important address is 10.1.10.1 which is UC500 CUE.
My problem is that from within ASA local network (192.168.1.0) i cannot reach UC500 subnets, neither can I reach ASA's local network from the UC subnets.
the log says
3
Sep 07 2013
00:21:49
DC
53
PBXCUE
32901
portmap translation creation failed for udp src inside:DC/53 dst inside:PBXCUE/32901
I tried exempting uc500 subnets on ASA but that didn;t work.
Funny thing is that I CAN reach the UC500 subnets when connecting with VPN to ASA...
Please help! I am not familiar with CLI.
I configured static route to 10.1.10.0 and since then I was able to ping 10.1.10.1 thorugh ASA;s VPN.
I would be grateful for ideas.
Lukasz
global (inside) 1 interface
global (outside) 101 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 101 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface https IIS https netmask 255.255.255.255 dns tcp 200 200 udp 200
static (inside,outside) tcp interface www IIS www netmask 255.255.255.255 dns tcp 200 200 udp 200
static (inside,outside) tcp interface smtp IIS smtp netmask 255.255.255.255 dns
static (inside,outside) tcp interface pop3 IIS pop3 netmask 255.255.255.255 dns
static (inside,outside) udp interface domain RenBetPBX domain netmask 255.255.255.255 dns
static (inside,outside) udp interface 5061 RenBetPBX 5061 netmask 255.255.255.255 dns
static (inside,outside) udp interface sip RenBetPBX sip netmask 255.255.255.255 dns
static (inside,outside) tcp interface 13000 SQL 13000 netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.x
route inside PBXCUE-network 255.255.255.0 RenBetPBX 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy

Hello Julio!
Thank you for your advice.
I have managed to solve my main problem by reconfiguring my switches vlans - enabling trunk port configs for required ports and allowing them access to both vlans.
Now I can see everything from all of my inside networks.
I continue my ASA adventures - I have managed to configure L2TP client access for my windows users, RADIUS authentication for domain users and yesterday night I have managed to configure site to site VPN with my RV120W router.
I am only an enthusiast but my recent successes have given me apetite for more...
I keep reading forums and trying to solve most of my problems myself but I have faced another one now and thought that maybe you could give me another tip on where to look for the issue:
I still have one problem with my L2TP VPN config - I have configured split tunnel on the group policy to tunnel only 192.168.1.0 network requests.
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
My network at home is 192.168.2.0 but it still tunnels everything (when I check my ip after connecting to VPN my home laptop still identifies with ASA gateway(!) address .
access-list outside_access_in extended permit icmp any interface outside object-group DM_INLINE_ICMP_1
access-list outside_access_in extended permit tcp any interface outside object-group DM_INLINE_TCP_1
access-list outside_access_in extended permit tcp any interface outside eq smtp
access-list outside_access_in extended permit tcp any interface outside eq 8080
access-list outside_access_in extended permit tcp any interface outside eq 23456
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 object-group DM_INLINE_NETWORK_1 any
access-list outside_access_in extended permit tcp any interface outside eq 13000
access-list outside_access_in extended permit tcp any interface outside range 8001 8016
access-list outside_access_in extended permit tcp x.x.x.x 255.255.255.0 interface outside eq ssh
access-list inside_nat0_outbound extended permit ip any 192.168.1.240 255.255.255.240
access-list inside_nat0_outbound extended permit ip any PBXVOIP-network 255.255.255.0
access-list inside_nat0_outbound extended permit ip any PBXCUE-network 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
access-list inside_access_in extended permit udp object-group DM_INLINE_NETWORK_2 any object-group DM_INLINE_UDP_1
access-list inside_access_in extended permit ip host IIS any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit ip host RBSTORE_NAS any
access-list inside_access_in extended deny udp any any object-group DM_INLINE_UDP_2
access-list inside_access_in extended permit tcp any any eq 5432
access-list inside_access_in extended permit tcp any host PBXCUE eq www
access-list inside_access_in extended permit tcp host PBXCUE any eq www
access-list inside_access_in extended permit tcp host RBCAMSTORE_NAS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RBSTORE_NAS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RENBETUPS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RenBetPBX host EXCH-MBX eq smtp
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
route print shows:
and 192.168.1.240 is my VPN IP - its metric has higher priority than the local gateway.
How do I change it?
Active Routes:
Network Destination        Netmask          Gateway       Interface Metric
          0.0.0.0          0.0.0.0      192.168.2.1    192.168.2.126   4250
          0.0.0.0          0.0.0.0         On-link     192.168.1.240     21
      80.51.24.22 255.255.255.255      192.168.2.1    192.168.2.126   4251
        127.0.0.0        255.0.0.0         On-link         127.0.0.1   4531
        127.0.0.1 255.255.255.255         On-link         127.0.0.1   4531
127.255.255.255 255.255.255.255         On-link         127.0.0.1   4531
      169.254.0.0      255.255.0.0         On-link     192.168.2.126   4506
169.254.104.126 255.255.255.255         On-link     192.168.2.126   4506
169.254.255.255 255.255.255.255         On-link     192.168.2.126   4506
    192.168.1.240 255.255.255.255         On-link     192.168.1.240    276
      192.168.2.0    255.255.255.0         On-link     192.168.2.126   4506
    192.168.2.126 255.255.255.255         On-link     192.168.2.126   4506
    192.168.2.255 255.255.255.255         On-link     192.168.2.126   4506
        224.0.0.0        240.0.0.0         On-link         127.0.0.1   4531
        224.0.0.0        240.0.0.0         On-link     192.168.2.126   4506
        224.0.0.0        240.0.0.0         On-link     192.168.1.240     21
255.255.255.255 255.255.255.255         On-link         127.0.0.1   4531
255.255.255.255 255.255.255.255         On-link     192.168.2.126   4506
255.255.255.255 255.255.255.255         On-link     192.168.1.240    276
===========================================================================
I am starting to feel like I am using a bit too much of your friendliness ...
Best Regards and have a great day!
Lukasz

How do I test for the presence of an active open document in Photoshop?

I’m new to Adobe scripting, and one of my first scripts deals with the activeDocument in Photoshop.
If there is no activeDocument, I want to display a message and terminate the script. My efforts
so far have been met with frustration. While developing the script in ExtendScript Toolkit,
I used the test expression "activeDocument in app", and everything worked as expected. And when I installed the script
in the Photoshop scripts folder and ran it from Photoshop with a document open, it also worked.
But when I ran the script from Photoshop with no document open, it failed.
Moreover, after that,the script failed when I tried to run it in ESTK.
I did some testing and found that my test expression, "activeDocument in app"
was returning true, even though no document was open.
Still in ESTK, I replaced the “app” with ”Application” in the test expression. That worked when
I stepped through the script. But when I tried to run it without stopping, it stopped at the
test expression, and displayed the error message, “Application is undefined.”
So how do I test for the presence of an open document in Photoshop ??

After posting this, I discovered the Photoshop Scripting Forum, and I found my answer there.—
I should have used “app.Documents.length” as my test expression.

Best practice standard User Acess Test for WIN2012 AD

What is the Best practice standard User Acess Test for WIN2012 AD

Hello,
as before, add a computer to the domain and log on with a domain user account to the computer.
You should be able from the client machine to open the sharedfolders on the DCseither with:
\\DCName\sysvol
\\DCName\netlogonor \\NetBiosDomainName\sysvol
\\NetBiosDomainName\netlogon
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

I was an apple beta tester for iOS7 and now my iPhone 5 shut down, it's unresponsive it gets recognized by iTunes when plugged into the computer but that's it. Since I was a beta tester is there any way to fix my iPhone??

I was an apple beta tester for iOS7 and now my iPhone 5 shut down, it's unresponsive it gets recognized by iTunes when plugged into the computer but that's it. Since I was a beta tester is there any way to fix my iPhone??

Are you still running iOS 7 bet?. If so go to the private developer section for help. We cannot help you here with beta software.

Linkage Error in Mapping and Operation mapping testing for Synchronous in NWDS

Dear Experts,
Hope you all are doing fine..
I am working in a synchronous scenario Proxy via SAP PI 7.4 to JAVA Application supporting JSON.I wrote JAVA program to convert JSON to XML and while performing test for the JAVA mapping in response structure at Operation Mapping,I am receiving following error..
LinkageError at JavaMapping.load(): Could not load class: json2xml/bin/pack/EsrJson2Xml
java.lang.NoClassDefFoundError: json2xml/bin/pack/EsrJson2Xml (wrong name: pack/EsrJson2Xml) at
java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClassCond(ClassLoader.java:735)
at java.lang.ClassLoader.defineClass(ClassLoader.java:716) at java.lang.ClassLoader.defineClass(ClassLoader.java:537)
at com.sap.aii.ib.server.mapping.execution.MappingLoader.findClass(MappingLoader.java:195)
at java.lang.ClassLoader.loadClass(ClassLoader.java:372) at java.lang.ClassLoader.loadClass(ClassLoader.java:313)
I followed some of discussions for the Linkagae error http://scn.sap.com/thread/1418477 but could not help..
Following are details of my NWDS and PI server:
SAP NetWeaver Developer Studio
SAP Enhancement Package 1 for SAP NetWeaver Developer Studio 7.3 SP10 PAT0000
Compiled the project with JAVA SE-1.6 as well as 1.5
SAP PO 7.4 Java Only , Release: NW731CORE_10_REL
SP: 05 JDK: jdk16 Latest Change: 353688
I have taken care to export all the Jar files used in NWDS to be exported and then imported as Archived files in PI server.
But could not see the 5 jar files in ESR. I hope there is some issue with name as can see in the log.Can the issue be solved?
How to test the Operation mapping for Synchronous Message in NWDS?
Regards
Rebecca

Dear Hareesh and Experts,
I resolved the issue by doing the below steps.
1. Downloaded the JDK5 and updated the Java console i.e. JRE 15.
2. I had created this project using the JAVA Compiler with JAVA SE1.6 initially. Changed this to 1.5 in the Properties of the Project.
3. Uploaded the project again in ESR Imported Archive.
The issue is solved.
Thanks a lot for all your inputs.

HT201380 Yesterday this was automatically installed. Today I can't access a document in Pages. A prompt says I need a Pages update. But the next screen tests for updates and informs me everything is up to date. What's up?

Yesterday this was automatically installed. Today I can't access a document in Pages. A prompt says I need a Pages update. But the next screen tests for updates and informs me everything is up to date. What's up?

It's highly unlikely that the Pages update problem has anything to do with the ARD client update, since the client is not involved in any way with Software Update. I'd suggest asking for assistance with the update problem in the forum appropriate for your version of Mac OS X.
Regards.

SESSION VARIABLES : HOW TO TEST FOR MULTIPLE USERS

I have a username session variable set up on a localhost testing envirnoment.
This works fine for one user, but when I open another occurence of the browser (or just another tab) to test for multiple users the system overwrites the session variable with the last username input.
So the question is:
Why doesn't dreamweaver hold an instance of the session variable for each browser session? and if not what are your suggestions?
Thanks
Adam.

Thanks for that.
After scouring the internet I found the only way of running 2 instances of firefox without them sharing the session variables is to create 2 new firefox profiles in windows + set the MOZ_NO_REMOTE environment variable.
Internet explorer is much easier as it has a 'new session' option in the file menu, but seems to have more trouble displaying tables correctly.
Hope this helps anyone with a similar problem.

[svn:osmf:] 13916: Added DynamicDRMTrait, Composite Unit tests for parallel and serial compositions.

Revision: 13916
Revision: 13916
Author:   [email protected]
Date:     2010-02-01 16:42:09 -0800 (Mon, 01 Feb 2010)
Log Message:
Added DynamicDRMTrait, Composite Unit tests for parallel and serial compositions. Bug fixes in CompositeDRMTrait.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/composition/CompositeDRMTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/OSMFTests.as
    osmf/trunk/framework/OSMFTest/org/osmf/utils/DynamicMediaElement.as
Added Paths:
    osmf/trunk/framework/OSMFTest/org/osmf/composition/TestParallelElementDRMTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/composition/TestSerialElementDRMTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/utils/DynamicDRMTrait.as

Unit tests for Swing models?

Does anyone know if someone has made some unit test to test the various Swing models?
I didn't find much in a search and checking the OpenJDK6 source bundle there are only about 20 tests (!) for specific bugs.
Specifically I'm looking for a test for TreeModel to test Jide's FilterableTreeModel (I filed a bug so maybe they'll write a test though :) ). SwingX has a nice helper class TreeModelReport but the actual test is not that complete.

Walter Laan wrote:
SwingX has a nice helper class TreeModelReport but the actual test is not that complete.what do you mean by "not complete" - SwingX has no special TreeModel, so nothing much to test :-) should have some TreeTableModel related tests, though. Not sure how complete they are ...
CU
Jeanette

ACL test for UDP

Similar Messages

Maybe you are looking for