Acrobat X doesn't recognize network printer

Trying to get Acrobat 10 Pro to recognize my new printer that I've connected to on my home network. Works just fine on my desktop, but it won't recognize the printer in Acrobat on my laptop.
Laptop prints to new printer fine from other programs.
Acrobat is still showing a printer that has been completely uninstalled from the laptop, but of course, not the one that has recently been installed.
Details...
Windows 7 64-bit
Acrobat 10 Pro (newest upate... completely uninstalled, reinstalled and updated)
Brand new Brother MFC-9970cdw printer with drivers installed properly from CD (uninstalled properly and reinstalled... three times)
I've read tons of posts all over the internet and nothing answers this issue.
PLEASE HELP!!
Thanks.

There seems  to be a problem related to installation/set up of printer device using Laptop. Kindly re-install the printer.
Thanks,
Atul Agarwal
Adobe Systems

Similar Messages

  • Computer doesn't recognize my printer since upgrade

    my computer doesn't recognize my printer since upgrade to yosemite

    Hi ..
    Try a reset >  Mac OS X: How to reset the printing system
    If a reset doesn't help, visit the website for your printer manufacture then search for v10.10 Yosemite drivers to download and install.

  • Trying to update firmware on my canon printer MG5320 but in doesn't recognize the printer being plugged in via USB cable

    I am trying to update firmware on my canon printer MG5320 to be able to use the airprint feature but in doesn't recognize the printer being plugged in via USB cable. I have tried restarting the macbook, turning on and off the printer, repairing permissions, deleting and redownloading the update what else can I do? The prinyrt works fine otherwise...

    If there are no drivers for Yosemite you might be in trouble.. HP will tend not to support printers once they are EOL.
    Getting it running over wireless rather than USB might be worthwhile.
    Can’t connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
    Has the printer been working and now failed after update.. what update caused the failure if that is the problem??

  • My macbook doesn't recognize my printer (HP photosmart).

    My macbook doesn't recognize my printer (HP photosmart). When I use the CD to install my printer, my macbook doesn't see the printer and also says that the installationprogramme is not suitable (while it is)

    I purchased the Pyle Sport (for swimming) PSWP4BK
    This is the information on the site I looked at.
    Product Information
    Color: Black
    Technical Details
    Brand Name
    Sound Around
    Item Weight
    4.8 ounces
    Product Dimensions
    6 x 2 x 8.2 inches
    Item model number
    PSWP4BK
    Batteries:
    1 Nonstandard Battery batteries required.
    Operating System
    Mac OS X, Windows XP Professional Edition
    Number of Items
    1
    On Sat, Nov 29, 2014 at 2:41 PM, Apple Support Communities Updates <

  • Acrobat Reader 8.1.2 network print issue after installing XP SP3

    I administer a network of 30+ workstations, and since installing Acrobat 8.1.2 and Windows XP Service Pack 3, I've been experiencing odd behavior from the print function in the reader.
    Staff can open a pdf document with no issues, but when they try to print to a network printer, nothing happens. I then in turn open wordpad on their workstation, do a "File, Print", and the print functions properly.
    I then can go back to the reader, and the print job will work.
    Nothing has changed on my network in regards to previous settings, with the exception of installing reader 8.1.2, and XP SP3.
    Any ideas, or potential solutions?

    You are not alone. I hope you get some response. We have seen nor heard anything.
    See: http://www.adobeforums.com/webx/?13@@.59b56569/6
    Title: Adobe Reader v8.1.2 Compatible with Windows XP Pro SP3
    One ray of hope is that it seems to be getting quicker. I don't know why but I'll take it!
    When I go to this Windows XP link,
    http://www.microsoft.com/windows/products/windowsxp/default.mspx
    it says I am running SP2 instead of saying I am running SP3, which is what my System Properties says is installed. Just something to think about and perhaps check.
    Good luck!

  • Computer won't recognize network printer - HP OJ Pro 8600

    My computer and printer are both connected to the same wireless network, but my computer won't recognize the printer (using the host name, IP address, or otherwise).  It's maddening, because it worked when I first set it up a year ago and just recently stopped - I uninstalled and reinstalled everything.  My iPhone can pick up the printer and print wirelessly, but there's an issue when I try to connect my computer using the HP software.

    Hi @petersaaron , and welcome to the HP Forums!
    I understand you're having issues utilizing your printer from your computer. I would like to the help with that!
    I would recommend starting with a power reset.   Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would then suggest downloading and running the HP Print and Scan Doctor.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Acrobat X doesn't recognize my EPSON V700 scanner (Mac OS X 10.7)

    Due to the restiction that TWAIN drivers usually don't support 64bit I had given up to see my EPSON V700 appearing in any of the CS5 application. With the recent installation of CS6 i was positively surprised that Photoshop recognizes the scanner. However, Acrobat X doesn't and I would appreciate any tips how to proceed.
    My configuration: Intel MacPro (2007) with Mac OS X 10.7 with all latest patches, Adobe CS6

    After reading a few other articles in this forum  about smilar problems I found the answer myself: While Photoshop uses the ICA driver provided by Apple Acrobat doesn't. Acrobat requires the installation of the drivers and software provided by EPSON. This package can be found on the EPSON web site, but only when searching for drivers for Mac OS X.6 that also run on OS X.7.

  • Acrobat Pro doesn't recognize CS4 Creative Suite serial #

    I've installed the CS4 creative suite and now acrobat doesn't recognize the serial #. All other apps are fine and working properly. Also running 10.4.11 OS. Any suggestions would be great, so thanks in advance.
    Tim

    If you replace Acrobat with the one from creative suites you'll have to use that serial number.  you'll have topen a Creative suite item first then try to open Acrobat.
    what you should have done if you had Acrobat already installed, was done a custom install of Creative Suites and installed everything except your previously installed Acrobat.
    To fix it you''ll have to remove acrobat completely. Then you have to put the CS Disk back in. and reinstall Acrobat only . Then it should recognize CS serial Number.

  • Satellite A505 Doesn't Recognize HP Printer

    My Satellite A505 laptop doesn't recognize my HP Color LaserJet 2550L printer, when I connect them with a USB line.  I tried going to the HP site to download the drive for the 2550L, but that site said Windows 7 already had it! Suggestions?
    Solved!
    Go to Solution.

    Did not work.  I tried installing the printer and driver using the add printer function (per the video), and, while I got a message that said the printer had successfully installed, neither the test page, nor a second, 1-page Word document, would print --  even though the printer is on, with paper loaded, no jams, and a green light, the USB cable is in tight (printer and laptop), but I get a printer job status of "Error" whenever a job enters the print queue.
    Same thing happened when I tried to load the driver from the original disk that came with the printer (I suspect the original driver isn't ready for Windows 7, but I have Windows 7 set to "automatic update", so I'm expecting it to go onto the internet and find the newest version of my driver, one that IS compatible -- that's the whole point of the auto update function).  Another issue I encountered, when I tried to load the driver manually, from the original disk, was it came back with a pop-up window that advised loading the driver with the "Printer Wizard", so I know that had to be a pre-Windows 7 disk.
    FYI -- I had this same problem trying to use an old Brother Laserprinter at home -- the USB wouldn't recognize the printer.  Loaded it via Windows, but got printer error message on any document I tried to print.
    This should be so simple! Plug 'n Play, via USB.  Maddening!

  • PSE 9 doesn't recognize my printer

    I have PSE 9 and Windows 7.  I printed several photos today and all of a sudden the program tells me I have to install the printer.  When I look at devices and printers, they are all showing up.  I printed a test page, and the test page works.  It's only one printer that it doesn't recognize this time, although it did earlier in the day.
    I read an earlier question with this problem, but I didn't see any solution. I tried the Ctrl/Alt/Shift idea to get rid of the preference settings, but that didn't help and I tried rebooting the computer.  I tried changing different settings and then changing them back like one person suggested. Nothing has worked.
    This happened to me one day about a year ago and I found a way to fix it either here or somewhere on the internet, but now that it's happened again, I can't find an answer.  I've been using PSE for many years and never had a problem with the printer until I got PSE 9.  Surely, someone has come up with a fix for this problem. 
    Thanks.
    Anna

    I decided to delete my printer from the computer and just added it again. That seemed to do the trick.

  • Mini Doesn't Recognize Epson Printer via Firewire

    this is an odd one...
    spent quite some time on tech support with Apple today.
    a brand new Mac Mini will not print with an Epson photo stylus via firewire.
    it recognizes the firewire connection, actually prints via usb, but will not print with the firewire.
    what is even stranger, the epson printer utility will allow for printing test pages via firewire.
    no matter how often the new Epson drivers (via website) are removed, reinstalled correctly, reset print system in printer set up utility, with permissions repaired, restarting, etc., it will not recognize the printer.
    tried this with two working Epsons, which both work on an older iMAC, and a new G5.
    firewire works with other items, like storage drives etc., and tried different cords.
    i am stumped.
    any clues?
    mac mini Mac OS X (10.4.10)

    When you add the printer, are you highlighting the printer in Printer Setup Utility, clicking *More Printers* and selecting *EPSON Firewire* in the Print Browser?
    Matt

  • Acrobat CC doesn't show or print spot colours in a Photoshop PDF

    When I open a Photoshop PDF, with a spot colour channel, in Acrobat CC 11.0.04, the spot colour doesn't show. But it shows when I click Output Preview (in Print Production). The colour doesn't print either. It also disappears when I convert it into CMYK (by checking the "Convert All Spots to Process" box in Ink Manager). I'm running Acrobat on OSX Mavericks.
    Has anyone had similar problems?
    Any help is appreciated.

    Thank  you for your reply.
    Indeed, I tried saving a PDF that had the "default appearance", it shows exactly the same. So it looks like it "can't" show the image.
    However, of course, I do want the image to be shown. How can I achieve this? How can I tell Adobe Reader (and other PDF viewers) I really really realllyyyyy want to see that image there? I believe I'm not doing anything really exotic, right? There must have been tons of other people that wanted to do the same thing, I guess?
                        var annotation = new PDFLinkAnnotation
                                    Action = new PDFUriAction(this.GetCodeUrl(code)),
                                    Contents = AnnotationIdentifier,
                                    Appearance = new PDFImageAppearance(bitmapImage),
                                    DisplayRectangle =
                                        new DisplayRectangle(
                                        barcodeLocationInfo.X,
                                        barcodeLocationInfo.Y,
                                        barcodeLocationInfo.Tsw,
                                        barcodeLocationInfo.Tsh),
                                    Flags = Flags
                        pdfPage.Annotations.Add(annotation);

  • My macbook pro won't recognize network printer

    Macbook pro is late 2011 running OSX 10.7.5 - Lion, connected wirelessly to home network with airport express.
    Have an HP deskjet connected with a cable to a MacMini mid 2011 - Yosemite.
    macbook always has problems printing to this printer on home network. "printer not found" or "printer not connected"
    Normally I turn off the printer and back on and it will print. Now I just get message "printer not connected"
    I deleted the printer and tried to add it back and it will not find the printer.
    Is it possible to reset the airport express?  Will it benefit me?  Is the issue that yosemite and lion do not get along?
    I really would like to be able to print from the macbook without having to unplug printer and plug it directly to the macbook.
    Frustrating to say the least!!!

    I had almost the same thing happen the other day - kept getting a message that my printer was not connected. I went to the printer setup on the printer's panel and the IP address was correct, everything looked as if it should be working. So I just reset my router - figuring that would fix the problem. No go. What I finally ended up doing was resetting my router to factory settings and setting it up anew.
    And that's what worked for me.
    Clinton

  • Doesn't Recognize The Printer!

    I've got Canon Pixma MP250 printer today, and downloaded drivers for Snow Leopard from Canon website, but later found out that the CD supplied with the printer support installation for OS x 10.6. When I finished installation I plugged the printer into USB port on Mac Book Pro, went to the System Preferences , clicked Add in the Printers pop up, but in the menu it simply doesn't shows up. The printer I mean! There is nothing to add, It is blank.
    What am I doing wrong?
    Help please!
    Thanks!
    Message was edited by: dethan

    Have you tried a different USB port on the computer?
    Are you using a "bus-powered" hub (does not have an independent power supply)? Those are often the cause of connection failures, as they fail to provide enough power for proper communication. Often, switching to a "self-powered" hub (has its own power brick) will fix printing issues.

  • Acrobat X doesn't recognize Word version

    I tried to export comments to a Word file but a window opened saying that I need to be using Word 2003 or later.  Word 2010 is what I am using.
    What can I do to make Acrobat X recognize that Word 2010 is installed on my computer?
    Thank you.
    Cathy

    Help!  I really hope that someone can answer this question.  Anyone out there?

Maybe you are looking for