Acrobat X Pro launches for a short period, then goes dead
Acrobat X pro does launch for something like 10 seconds. While the Application Manager shows up in the dock, acrobat is getting terminated and shortly after, the application manager stops too.
can not work with our pdf forms anymore.... all the returned and filled in forms are worthless due to this very bad release of acrobat x pro
can anybody help?
thx, andreas
I would try uninstalling Acrobat X Pro, and reinstall it again.
I had the same problem but it was because of a conflict between an install of Acrobat X Pro and an install of Creative Suite 5.5 Master Collection (which includes Acrobat X Pro). I uninstalled all, and reinstalled and it now works fine.
Similar Messages
-
Hi my iPhone 4 won't turn on . When plugged in on several different chargers the following happens . Blank screen then apple sign for a short period then it buzzes and goes blank. Have tried power button and home button but no change ,When connected to mac get message that phone is in recovery mode and that i must restore this phone before it can be used with iTunes . Is this my last resort as I have some photoessays I don't want to loose.
PPlease helpHello, Chantal105
Thank you for visiting Apple Support Communities.
If your device is in recovery mode you will need to restore the device.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Jason H. -
Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device “Kitchen”. The host cannot be reached." Has anyone else had this problem
I'm having the same issue. Haven't found a workaround. I use a main TimeCapsule as my main router, also have another TimeCapsule that extends the network, three Airport Express and an AppleTV. For whatever reason, the two AirportExpress that I have in a different rooms cut out. I only have 600 square foot apartment so it's not that big, the signal should be strong enough. Airport Utilitiy reports the signal strength to be strong on all devices.
I'm using all new equipment, a new MacPro for my music, new TimeCapsules, new Airport Express, new everything with the latest Yosemite software. Very frustrating. My Airplay used to work very nice and now I'm constantly having issues and restarting my network. I did a fresh install of all my software on my MacPro when I got it in January so it's not as if it's an old machine with old software, everything is new within the last 6 months.
The only workaround I found so far is to unplug the devices and to plug them back in. Since upgrading to Yosemite, I'm restarting my Airport Express at least twice a week. Very annoying. -
The sound keeps going on my iPhone 4s ringer continues to work when volume buttons are pressed the word ringer comes up but none of the indicator blocks for volume level tried all the fixes undocking from PC works for a while then it happens again but phone not in warranty so Apple what's the fix
IF you are getting no messages period - not just no iMessages - then it is very likely a carrier issue. It is AT&T and not the phone. SMS travels via the carrier wave used to make phone calls - iMessages use data and go through Apple servers as you know
If you are getting no messages at all - then I wonder if your cell service is ok or if you are in an area of strong signal - then does your SIM card need to be looked at -
help
Hello Elliottmilburn,
The article linked below details some additional troubleshooting steps and information that can help stabilize your iPhone's cellular data connection.
iPhone: Troubleshooting No Service
http://support.apple.com/kb/TS4429
Cheers,
Allen -
Entire system crashes when fire fox is run for a short period of time
So I've been building a new PC over the last 3 months and today it's finally complete. When I run Firefox for a short period of time (shortest so far is 10 seconds, longest is roughly 30 minutes) my entire system will just freeze up. Display stays on but nothing I do will update the display and I will need to forcefully shut down the entire PC.
I would rather not switch to a different browser.
I'm certain this only happens with Firefox because it does not happen with IE, and I've been using Chrome for the last 10 mins without an issue. It does not seem to crash is safe mode.
Not sure if I was getting unlucky but I was using the British version of fire fox and it would seem to crash more constantly then the American one.
*EDIT*
I just got the same crash with chrome. But it took a lot longer to happen compared to Firefox. I'm really confused as to what's happening now, I'm going to close my browsers all together now and try doing something else for a few hours, I don't think it's because my system is getting over powered because my stuff is very high end.
I will post my system specs, then leave and come back in a few hours, to check for replies. Sorry if I take a while to get back to you.
If you need additional information just ask.
Specs
Processor-i7 3930k
Mobo-asus p9x79 extreme
Graphics card-amd 7970
RAM-g.skill 16gb 1600mhz
I think that's the necessary specs.
I'll see you all in a while.Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
@Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error". I have uninstalled and re-installed software, It works for a short time then I get that error again when i go to open a file. Thank you!
Without proper system information and other details like what files you work with nobody can tell you much. From corrupted prefs to issues with your PS swap file to actual problems with the fiel storage this could be anything.
Mylenium -
I cannot sync my iphone 4 to my imac it connects for a few seconds then goes off
please can someone help me When i connect my iphone 4 to my imac using bluetooth it pairs up but only lasts for a few seconds then goes off and shows
not connected i have tried all sorts of ways but without success why is this happening am i the only one does anyone know the answer pleaseSeems like my problem - I have a new iPhone 4 and it does not want to pair with any device. It seems to connect, and is recognised by my MacBook pro, it shows the code that my Macbook shows, but then says it cannot connect. Neither did it connect to another imac, nor does it connect to my carphone. Have received a replacement (as I had bought the iPhone five days ago), have a new one now, but exactly the same problem. But I cannot alter the bluetooth settings on my iPhone, and restoring does nothing, nor leaving it in the completely unaltered setting, nor switching off all other wireless devices. Does anybody know how to solve this?
Arnold -
When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?
You can take some of the steps here, #4, #5 or even trying a #18
Step by Step to fix your Mac
but I suspect your going to first have to create a data recovery drive
Create a data recovery, undelete boot drive
to get your data off the machine,
then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
Step by Step to fix your Mac -
I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!
Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.
-
my ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off and also it wont be recongnize by my computer .please help
I'm having the same problem. I'm using a new shuffle usb cable in my 2nd generation shuffle and nothing shows up on computer. I'm wondering if the dock for the second gen is different than the new usb cable direct into the 2nd gen shuffle. I don't have a dock for it. Before I buy one on ebay I hope someone can assist.
-
When i open my macbook pro- the screen lights up and then goes black-
When I open my Macbook pro- the screen lights up and then goes black- keybook stays backlite- can not get screen to come back on. Must reboot-
thoughts-?? Macbook is 6 months old and on second hard drive ( failure after 45 days).Hey! exact same thing happens to me... I use the keyboard shortcut to turn off the screen which is ctrl - shift - eject button. Then just poke a key and it wakes up again fine, it doesn't fix the problem but at elast you don't have to reboot. x
-
G'day I can't download or update apps on my phone ( on computer is fine ). After entering password it shows downloading for a split second then goes back to being available. It's a new recent change & I can't see anything wrong with my settings on the phone
Howdy Aussiebloke17,
It might be worth attempting a restart of the iPhone, and then a reset, should that not resolve the issue.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the iPhone is still not properly downloading apps, you may want to try restoring the iPhone.
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
All the best,
Allen -
I'm having the same problem I've seen others write about with CS6 and Acrobat X Pro not launching every now and then. I've tried the solution of deactivating in another CS6 application and reactivating, but it hasn't worked in the past.
I'm running Windows 7 Professional. In Programs and Features, I have the following applications listed:
Adobe Acrobat X Pro - English, Français, Deutsch
Adobe Creative Suite 4 Design Standard
Adobe Creative Suite 5 Design Standard
Adobe Creative Suite 6 Design Standard
Each time I have the problem, I uninstall the first one that I listed above. I also click on the last (CS6) and uninstall only Acrobat X. Then I restart the system and reinstall CS6 Acrobat only.
I presume I still have CS4 and CS5 listed because I upgraded from one to the next. I don't use the old versions anymore. Should I remove any of these permanently? Would that help solve the problem? Even though I uninstall the first one, it always comes back when I install Acrobat through the CS6 setup file.
Thanks for any suggestions! This uninstall and reinstall is getting very annoying. I used to think it happened only once a month, which was bad enough, because it always interrupts my work flow to not be able to open a PDF file as usual. But then, after reinstalling this past weekend, Adobe updated Acrobat on my system last night, and this morning the problem occurred again, only a couple of days since the previous time. That's even more frustrating!I'm sorry I wasn't able to try your suggestion till today. I performed the first step: I downloaded the file Acrofix.zip, extracted the file and executed it. Everything appeared to work correctly. I wasn't having the problem today, so will I have to wait to apply the fix till Acrobat doesn't start again, or will running the fix today fix it for good?
-
Acrobat X Pro launch gets Microsoft C++ Runtime error message
My Acrobat X Pro no longer works. Every time I try to open a PDF document is get the following error message and Acrobat quits.
I haven't seen any discussion of a fix for v.10
Does anyone have a solution?David - Thanks for the reply. I eventually bought the piece of software recommended by Microsof ad that fixed THAT issue...I now have another issue woth Acrobat...it crashes every time I open a PDF document. initially, it was crashing only when I tried to print, but now it's with every PDF file. I have answered your questuions below:
What OS are you running? Please include any Service Packs that have been installed. Win 7 64 bit
Do you have any outstanding recommended or required updates from Windows pending? No
Do you know if Acrobat has been updated to 10.1.2? No, running running 10.0.0.396
Did Acrobat ever launch successfully? yes
If so, what changed? running the SpeedMaxPC software recommended by Microsoft for the original problem. But the degradation was gradual...first I couyldn't preint then I couldn't open. I have Acrobat 10 on several other comouters and all run fine.
Maybe you are looking for
-
Inbound delivery for ASN Delivery
Hi, I have created an outbound ASN IDOC for intercompany transfer. But this ASN is not creating the Inbound delivery IDOC. I have configured the partner profile for both outbound and Inbound. Please let me know what I am missing. Thanks Ram
-
HOW TO SET MY OWN PF-STATUS-urgent
hi all, anybody can tell me where i made mistake . after writing this code when i am running this report it is not showing our own pf-staus. report zmahi4. selection-screen: begin of block b1. parameters : p_appln type zuser_secobjects-appln. parame
-
Problem while starting and logging off windows 7 pro
Hi, Last Month I have purchase a Lenovo T440P laptop with windows 7pro pre loaded. After a couple days of operating the system and after updating the windows OS and restarting the system my laptop never got on completely. After the initial Logo of Th
-
Trying to open/play .wmv files; I have the latest version of flip4mac installed and appears to otherwise be working fine. These files do have the .wmv extension, however when I click on them to play/open I get the following message "the movie/file co
-
Desktop Update Will not install
Hello everyone. I received a notification that I needed to update the Desktop software to v5.0.1 2010-03-25 and so downloaded the 250MB file. When I clicked on install, after a few seconds I received the message "There was an error installing updates