ACS 4.2 RDBMS Action 105/108 - How to set to something other than default "RADIUS Token Server"
I'm trying to create an import script for RDBMS to import users, but cannot figure out how to set the "PASS_TYPE_RADIUS_TOKEN" to something other than the default of "RADIUS Token Server". We have multiple RADIUS Token Server definitions.
I can create a user with what I need, except external db password is set to "RADIUS Token Server". How do I set it to (for example) something like "RADIUS Token Server - xxxx"
We have more than 1 RADIUS Token Server definition called "RADIUS Token Server - xxxx", "RADIUS Token Server - yyyy".
Thanks!
As per my knowledge you have to update 4.2 ACS to
5.1, because when you go for RDBMS synchronization it wont allow you, I have faced problem in past while primary ACS was 4.1 and secondary I have 4.2, I have updated primary ACS to 4.2 and everything is working fine.
Similar Messages
-
How to upgrade to something other than the most recent OS
I am currently running Os 10.6.8. I would like to update, but I have a critical application that is only qualified for 10.8.2 and the current operating system is 10.8.4. Is there a way to buy something other than the current OS?
Apple updates the OS X installer at the Mac App Store with the latest version, and older OS X versions disappear. If you want to upgrade to Mountain Lion and you purchase Mountain Lion at the App Store, you will get the OS X Mountain Lion installer with 10.8.4 installed, so it will install 10.8.4, without any possibility to install 10.8.2.
You can try changing system files to look like you are using 10.8.1 and try applying the 10.8.2 update, but doing this you may damage OS X Mountain Lion -
My hard disk crashed and I cannot find out how to "contact customer service" other than this forum. The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive. Please help.
Hi Anthony ,
Here is the link to connect with Adobe Chat Support.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Hope your query gets resolved .
Regards
Sukrit Dhingra -
Use printer other than default? how to hard code it?
Is it possible to make application to use specific printer but other than default? may be hard code it into application code?
For example I know the name of print service(the PATH to configured printer) and I want my application to use THAT printer most of the time. how can make it so that my application uses one printer which is other than default..
printDialog is not a good solutionin in my case I think because user might have 15 printers configured on his machine! and I do not want him to scroll PrintServices combobox looking for needed printer... why not show only 2 or printers out of 15?
or in my case I think it is even better to hard code couple of configured printers in an application code so that I user does not get tired of working with printDialog window every time he needs to print. When my application is released to client it will be used especially for printing porposes of one particular document so he does not need to see margins and printer settings everytime.Basically the print dialog should offer this function without you having to code it. I don't know on Windows but on my Mac you can select printers other than default and get the computer to remember them.
-
How to set current year,month as default value in combo box
hi, im newbie of xcelsius user
i realize that hv a issue that display combo box base on year & month
let said
<b><u>step 1</u></b>
I create excel data like this
<b><u>year___ </u> </b> | <u><b>month_ </b></u> | <u><b>Product</b></u> | <u><b>revenue</b></u>
02-04-09 | 02-04-09 | a | $4,154
03-04-09 | 03-04-09 | b | $6,813
04-05-09 | 04-05-09 | a | $9,875
05-06-09 | 05-06-09 | b | $6,813
06-04-10 | 06-04-10 | a | $6,813
07-04-10 | 07-04-10 | b | $9,875
08-06-10 | 08-06-10 | a | $9,875
22-06-10 | 22-06-10 | b | $6,813
<u><b>Step2</b></u>
Then i go format cell to format/custom date to year & month
Eg1: Year u2013> 02-04-09 convert to u2018YYYYu2019 (2009)
Eg2: Month u2013> 02-04-09 convert to u2018mmmmu2019 (April)
So output like this
<u><b>year</b></u> | <u><b>month</b></u> | <u><b>Product</b></u> | <u><b>revenue </b></u>
2009 | April | a | $4,154
2009 | April | b | $6,813
2009 | May | a | $9,875
2009 | June | b | $6,813
2010 | April | a | $6,813
2010 | April | b | $9,875
2010 | June | a | $9,875
2010 | June | b | $6,813
But the problem is when i insert to combo box,use u201Cfilter Row u201D, i excpectation will display only 2009,2010
But Actual display the Year in combo box is duplicated :'(
so any solution ? and then only how to set current year & month as default value :'(
thanks,
regards
s1
Edited by: Leong Pui Kee on Feb 25, 2011 5:25 AM
Edited by: Leong Pui Kee on Feb 25, 2011 5:36 AMhi,
your created data
step 1
I create excel data like this
year___ | month_ | Product | revenue
02-04-09 | 02-04-09 | a | $4,154
03-04-09 | 03-04-09 | b | $6,813
04-05-09 | 04-05-09 | a | $9,875
05-06-09 | 05-06-09 | b | $6,813
06-04-10 | 06-04-10 | a | $6,813
07-04-10 | 07-04-10 | b | $9,875
08-06-10 | 08-06-10 | a | $9,875
22-06-10 | 22-06-10 | b | $6,813
In this, year and month both are same data, make the diffent data like year 2009, 2010 And month Jan, Feb, March, ...Etc
and also one more check you formulas on month and year, select correct source data, destination data for compoonent..
OR
from above, to create a date column and convert date-->year, date--> month and Explore it.
All the best,
Praveen -
How to install adobe X or XI in a directory other than default.
Please,
I need install Adobe reader in a diferent directory of default.
How to install adobe X or XI in a directory other than default.
best Regards.What OS? Why are you trying to install i a different directory. No matter what directory you install in, quite a bit must be installed on the boot drive. If you are running out of hard drive space, it is time to get a new hard drive.
-
How to set my iPad as a default device while my iPhone and iPad share a same email address?
Shiv1611 wrote:
Though i am still gona try using the same Itunes. Will same Itunes support two apple ids.
That depends on what you mean. If you mean two iTunes Store accounts, no. Only one Apple ID can be logged into the iTunes Store at a time and if automatic download, iTunes Match or re-downloading of content is used the ID can not be changed for 90 days.
Shiv1611 wrote:
So i guess if i solve my goof up on creating different apple IDs and setting her phone as a new one .. according to you that shall do the trick.
But i have a question here in that case what happens to all the applications that have been purchased on my Id ? Wont i be needing them to be purchased/downloaded again in the new id?
If you previously had been using the same Apple ID for iTunes Store purchases for both of you there is no reason to change what you've been doing. If this is your wife's first iPhone, and you want to share the iTunes Store account just don't use the new Apple ID you created. As long as there are no purchases on it there's nothing to worry about. -
How to set Bluetooth headset as a default answering device in iphone?
How to set Bluetooth headset as a default answering device in iphone?
All you need is to pair it.
http://support.apple.com/kb/TS2225 -
How to set InDesign CS5 as the default in the system having InDesign CS4 has the default ?
How to set InDesign CS5 as the default .indd application when you have InDesign CS4 and CS5 installed and InDesign CS4 is the current default (InDesign CS4 was installed after CS5 installation)
Thanks, but I already tried it at first but it is not the effective method.
I think its because of the this reason :
Both - InDesign CS4 and InDesign CS5 have their application/program/exe named as "indesign.exe".
Installation of either InDesign CS4 or InDesign CS5, sets a Windows default path for the "indesign.exe". In this case, since InDesign CS4 was installed later (after InDesign CS5 was already installed), the "indesign.exe" which was directing InDesign CS5's "indesign.exe" was replaced by InDesign CS4's "indesign.exe".
But after long google and search through regedit, I've got the solution :
Locate HKEY_CLASSES_ROOT\InDesign.Document\Shell\Open\Command in regedit
Change the value of (Default) attribute to "C:\Program Files (x86)\Adobe\Adobe InDesign CS5.5\InDesign.exe" "%1" // Include the quotes
Message was edited by: Vidit Kothari -
When I open a photo with Preview, it opens all the photos I have viewed previously. How can I prevent that, other than manually clearing the list after each time?
Close the pictures before you quit Preview. Cmd-opt-q will close all windows and quit. cmd-opt-w will close all windows and not quit.
Or, Disable automatically opening files that were left open in General System Preferences -
How to set remembering playback position as default
Hi everyone,
I know how to manually set the "Remember Playback Position", however it doesn't remain set and keeps on dropping off.
does anyone know how to set it as a default value? or is there a bug effecting this functionality?Hi Alessanrdo,
Thanks for your reply.
Actually the motive behing this option is to cover the "loop hole" of ARQ application. If you notice, we can "keep" adding the same role which is already assigned with different validity dates. ARQ does not control this!
Eventually, what happens that in the back end system, the user master record is overwhelmed with the same role entry with different validity dates!
Unfortunately, application does not have any control over this. Therefore, at least making "RETAIN" as the default provisioning action, we can have a "sort" of control over this. What happens is, if I add a role which is already assigned to a user and change the validity dates, there will not be any new entry in the back end system with the same role.
Hope this will help you understand the requirement and advise me.
Regards,
Faisal -
Unsucessful ACS to RADIUS token server exchange
Hello team:
We are getting a hard time in trying to make our ACS 4.2 talk to an external FreeRadius token server.
When our ACS sends the Access-Request message, our FreeRadius token server answers with an Access-Accept message with zero atributes on the message. This answer, according to ACS documentation, should be perfectly accepted by ACS when it works as a RADIUS client. However, our ACS considers this answer as an error and so the transaction fails.
In order to compare with another platform working of radius server of our , we replaced our FreeRadius token server by another CS ACS. With this scenario, everything works! So we sniffed the ACS to ACS transaction and found that two RADIUS attributes are sent with the Access-Accept message:
(1) Framed-IP = 255.255.255.255
(2) Class = 0x434143533a302f356662622f37663030303030312f31383133
We got back to our FreeRadius as the external RADIUS server of our ACS, and managed it to generate and return exactly the previous kind of message to the ACS working as radius client, however when our ACS receives the RADIUS Access-Accept with these attributes, it still rejects the answer and fails.
So we are missing something.
¿Did anyone manage to make ACS query an external RADIUS server with success? We would appreciate any hints!!
thank you very much in advance
Rogelio Alvez
ArgentinaThanks for the interest Tarik!
Here you have the debug from both sides ACS 4.2 and Freeradius in the same authentication event:
ACS Debug from a terminal monitor
2w1d: AAA/AUTHEN/CONT (4096347873): continue_login (user='(undef)')
2w1d: AAA/AUTHEN (4096347873): status = GETUSER
2w1d: AAA/AUTHEN (4096347873): Method=radius (radius)
2w1d: AAA/AUTHEN (4096347873): status = GETPASS
2w1d: AAA/AUTHEN/CONT (4096347873): continue_login (user='camara/829113')
2w1d: AAA/AUTHEN (4096347873): status = GETPASS
2w1d: AAA/AUTHEN (4096347873): Method=radius (radius)
2w1d: RADIUS: ustruct sharecount=1
2w1d: RADIUS: Initial Transmit tty7 id 175 192.168.0.3:1645, Access-Request, len 86
2w1d: Attribute 4 6 C0A800CB
2w1d: Attribute 5 6 00000007
2w1d: Attribute 61 6 00000005
2w1d: Attribute 1 15 63616D61
2w1d: Attribute 31 15 3139322E
2w1d: Attribute 2 18 893A4B64
2w1d: RADIUS: Received from id 175 192.168.0.3:1645, Access-Reject, len 32
2w1d: Attribute 18 12 52656A65
2w1d: RADIUS: saved authorization data for user 80E8A88C at 0
2w1d: AAA/AUTHEN (4096347873): status = FAIL
2w1d: AAA/AUTHEN/ABORT: (4096347873) because Invalid password.
2w1d: AAA/MEMORY: free_user (0x80E8A88C) user='camara/829113' ruser='' port='tty7' rem_addr='192.168.0.202' authen_type=ASCII service=LOGIN priv=1
2w1d: AAA: parse name=tty7 idb type=-1 tty=-1
2w1d: AAA: name=tty7 flags=0x11 type=5 shelf=0 slot=0 adapter=0 port=7 channel=0
2w1d: AAA/MEMORY: create_user (0x80E8B920) user='' ruser='' port='tty7' rem_addr='192.168.0.202' authen_type=ASCII service=LOGIN priv=1
2w1d: AAA/AUTHEN/START (2072451976): port='tty7' list='pepe' action=LOGIN service=LOGIN
2w1d: AAA/AUTHEN/START (2072451976): found list pepe
2w1d: AAA/AUTHEN/START (2072451976): Method=radius (radius)
2w1d: AAA/AUTHEN (2072451976): status = GETUSER
Freeradius Debug
rad_recv: Access-Request packet from host 192.168.0.3 port 3912, id=23, length=94
User-Name = "camara/829113"
NAS-IP-Address = 192.168.0.3
NAS-Port = 6372
NAS-Identifier = "CiscoSecure ACS v4.2(0.124)"
User-Password = "\277\241\340t\312/\2303^;\216\233\3618\2179"
# Executing section authorize from file /etc/freeradius/sites-enabled/vuserver
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.0.3/auth-detail-20120714
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.0.3/auth-detail-20120714
[auth_log] expand: %t -> Sat Jul 14 18:42:32 2012
++[auth_log] returns ok
[IPASS] Looking up realm "camara" for User-Name = "camara/829113"
[IPASS] Found realm "DEFAULT"
[IPASS] Adding Stripped-User-Name = "829113"
[IPASS] Adding Realm = "DEFAULT"
[IPASS] Authentication realm is LOCAL.
++[IPASS] returns ok
[suffix] Request already proxied. Ignoring.
++[suffix] returns ok
++[files] returns noop
++[control] returns noop
rlm_perl: Response: 201: Succeeded
rlm_perl: Added pair User-Name = camara/829113
rlm_perl: Added pair User-Password = \277\241\340t\312/\2303^;\216\233\3618\2179
rlm_perl: Added pair NAS-Identifier = CiscoSecure ACS v4.2(0.124)
rlm_perl: Added pair Realm = DEFAULT
rlm_perl: Added pair Stripped-User-Name = 829113
rlm_perl: Added pair NAS-Port = 6372
rlm_perl: Added pair NAS-IP-Address = 192.168.0.3
rlm_perl: Added pair Class = 0x434143533a302f3265662f37663030303030312f31383133
rlm_perl: Added pair Framed-IP-Address = 255.255.255.255
rlm_perl: Added pair Auth-Type = Perl
++[perl] returns ok
++[expiration] returns noop
++[logintime] returns noop
Found Auth-Type = Perl
# Executing group from file /etc/freeradius/sites-enabled/vuserver
+- entering group Perl {...}
rlm_perl: Added pair User-Name = camara/829113
rlm_perl: Added pair NAS-Identifier = CiscoSecure ACS v4.2(0.124)
rlm_perl: Added pair User-Password = \277\241\340t\312/\2303^;\216\233\3618\2179
rlm_perl: Added pair Realm = DEFAULT
rlm_perl: Added pair NAS-IP-Address = 192.168.0.3
rlm_perl: Added pair NAS-Port = 6372
rlm_perl: Added pair Stripped-User-Name = 829113
rlm_perl: Added pair Framed-IP-Address = 255.255.255.255
rlm_perl: Added pair Class = 0x434143533a302f3265662f37663030303030312f31383133
rlm_perl: Added pair Auth-Type = Perl
++[perl] returns ok
WARNING: Empty post-auth section. Using default return values.
# Executing section post-auth from file /etc/freeradius/sites-enabled/vuserver
Sending Access-Accept of id 23 to 192.168.0.3 port 3912
Framed-IP-Address = 255.255.255.255
Class = 0x434143533a302f3265662f37663030303030312f31383133
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 3 ID 23 with timestamp +575
Ready to process requests.
Inside the file archive.zip you`ll find
cap_freeradius.cap (communication sniffed between the ACS and the Freeradius)
captura2acsOK.pcapng (communication sniffed between the ACS 1 and the ACS 2 where everything its ok)
If you need more information or output please let me know.
Rogelio -
How do I change my default email to something other than Mail?
Whenever I try to use the "contact us" button on websites, Mail pops up but I want to use another email provider. Anyone know how to set my other emails as the default?
Hi ...
Open the Mail app.
From the menu bar top of your screen click Mail > Preferences then select the General tab.
Click the pop up menu to the right of: Default Emai Reader
Select the email client you want to use. -
ALV Graphs: How to set line type graph as default graph
Hi All,
I need to develop a line graph. The fields on the X-axis will change dynamically. Some times they may be 10 field and some times they may be more than 100 fields. I tried with Function Module GFW_PRES_SHOW_MULT. But I can only display maximum 32 fields. Can anyone tell me exact program which helps me to full fill my requirement. It will be a great help if you could told how do display line type graph as default graph in ALV. In REUSE_ALV_GRID_DISPLAY there is a Exporting parameter MT_CHART_TYPES but this help you only to enter description for X-axis and Y-axis.
Many thanks in advance.I would call GRAPH_MATRIX_2D with options depending on representation you wish
look at the program GRBUSG_1 to see how to use it
there you have some options to display bar chart, but you could use other values (complete list of options is available in documentation of function module GRAPH_MATRIX_2D - click on parameter OPTS in help display to see full explanation)
exemple:
P2TYPE = LN to display lines -
How to set the keepalive timeout and nativepoll in application server 8.2
Hi,
I would like to know how to set "keepalive timeout" and "nativepoll" on application server 8.2.
Thanks,These parameters were set in Application server 7 as per the following documentation:
http://docs.sun.com/source/817-2180-10/pt_chap4.html
However I am not able to find any documentation with regards to application server 8.2
Please advice..
Thanks
Maybe you are looking for
-
Phone Dropping calls and disappointed in Verizon
Very disappointed in Verizon Wirelessly. Over the past year my phone has continuously dropped calls. It's getting worse and worse. I went from have decent service 3 years ago to only being able to talk in my bedroom and kitchen over the past year. o
-
I do a simple transformation of some data and receive an XML. The encoding of this XML is <?xml version="1.0" encoding="ISO-8859-1"?> The client wants encoding UTF-8 however. How can I transform with this encoding? regards, Léon Hoeneveld
-
Editting Joomla Templates in Dreamweaver
I got my site and everything set up in Dreamweaver to my local server, I can view it in live view via index.php and when I go into live code to look at the code for stuff I want to change, then when I go to turn live code off to edit any changes, it
-
Database connections in Planning
Hi, We are experiencing issues suddenly in our production environment and we are not able to run FR reports as a result. When we run the reports we get the following error: *8001: The Database Connection could not be found: CHRDistr:CHRDistr:Essbase:
-
Warning (441) Agent communication is blocked
Warning (441) Agent communication is blocked