ACS v2.6 with Distribution Table

All,
I recently inherited the duties of an ACS 2.6 Server. I have built 2 other ACS boxes in the past (more recent versions), but I am perplexed by the configuration and the way ACS was configured. I looked at some logs, and realized that none of the information was being replicated to the secondary ACS machine for the past few years. I found this out when I tried to log into a router that had specified the secondary ACS first in the config, and I wasn't allowed to login, since my account ID was not on the secondary box. For the most part, all information in the 2 machines are the same, with the exception of my newly created user account. I figured I would set the replication up properly, and force replication, but nothign happened. The logs state that replication was completed successfully, but the 2 Cisco Databases are not the same. I then went into "Network Configuration", and there was a Distribution Table Entry, with only the primary ACS name present. Anyhow, I changed that to include both the primary and secondary ACS names, and upon doing this, I was able to get authenticated to the router, but this is because the secondary server is proxying my request to the primary box, at which point I can be verified in the database. Now, my main questions are, how can I replicate my information over to the secondary box (does this mean altering the Distribution Table entries again)? My network doesn't have 10 ACS servers where I would need to proxy user information, like it is now, but I have always set it up as a primary and a secondary, and am a little confused on how to handle this. Any help wuold be appreciated!
Thanks,
Matt

Hello,
Replication can be tricky, especially on the older versions of ACS. I just now verified that on all verions of ACS through 3.1 (including 2.6 and starting even before 2.4), replication can only take place between two ACS servers of the EXACT same rev, patches and all. I hope that is not your problem; for example per Cisco TAC to replicate between 2.4 and 2.6, you have to start out by replicating between two boxes at 2.4 and then upgrade one to 2.6. And as I recall, even when you try to replicate between two different versions, the logs can state that it was successful when it really wasn't. Believe me, replicating between two revs will not work, no matter how creative you get.
If both servers are the same rev of ACS, then verify the settings on both boxes at the System Configuration --> CiscoSecure Database Replication page. You may have already done this, and if so let me know...
Primary server:
Replication Components - the appropriate items should be checked for "send"
Partners - the secondary server should be listed under "Replication"
Secondary server:
Replication Components - the appropriate items should be checked for "receive"
Note: be careful if you plan to receive the Distribution Table, can result in circular proxying
Partners - the primary server should be listed under "Replication"
Inbound Replication - primary server or "any known" should be selected.
Let me know how that works out. Good luck!

Similar Messages

Use of proxy distribution table in ACS v4.0

HI All,
We are running with Cisco ACS v4.0 AAA server, Here I need the use of Proxy distribution table.
Why is this required and what is the functionality of it.
Regards
Suresh

Use ACS as Proxy in a distributed enviornment.
Using proxy, ACS automatically forwards an authentication requests from AAA clients to AAA servers. After the request has been successfully authenticated, the authorization privileges that you configured for the user on the remote AAA server are passed back to the original ACS, where the AAA client applies the user profile information for that session.
Fallback on Failed Connection
You can configure the order in which ACS checks remote AAA servers if a failure of the network connection to the primary AAA server occurs. If an authentication request cannot be sent to the first listed server, because of a network failure for example, the next listed server is checked. This checking continues, in order, down the list, until the AAA servers handles the authentication request. (Failed connections are detected by failure of the nominated server to respond within a specified time period. That is, the request is timed out.) If ACS cannot connect to any server in the list, authentication fails.
Stripping
Stripping allows ACS to remove, or strip, the matched character string from the username. When you enable stripping, ACS examines each authentication request for matching information.
Regards,
Jatin Katyal
- Do rate helpful posts -

ACS Proxy Distribution Table - Logs ?

Hello,
I have setup a proxy distribution table in my Cisco ACS v4.2 (patch 6).
I have two type of users: Suppliers (external) and TI user (internal). They connect to our Internal Network by a VPN SSL connection (AEP Netilla box).
This box have 2 realms. One for suppliers, another for TI users.
The aim is that:
* For the suppliers connect trought the Netilla box which forwards the authentication (RADIUS Authentication) to the ACS which forwards the request to an RSA server.
* For TI User, they connect trought the Netilla Box which forwards the request (RADIUS Authentication) to the ACS which check the Active Directory.
=> It's working perfectly.
The problem is that I have no logs from the ACS box about the suppliers which are forwarded to the RSA server. If possible, I want to know which users try to connect, if they are permit (or not) and eventually how many times they are connected.
The problem is the Netilla box doesn't have Radius Accouting.
I was hoping that the ACS logs these kinds of connections. (It's working for users, TI users, authenticated by the Active Directory).
Is-it possible that the ACS forwards only the request without taking attention of what it is forwared (except remove the Character String).
Is there another way to do what I'm talking about ?
See my VISIO attachement.
Thanks in advance for your attention,

I really hate draggin up old posts, but I have the same exact question. In my scenario, I am proxying requests for eduroam (basically any user name that ends in .uk, .com, .ca or any other country suffix) off to our national server(s). I would like to know if/when these requests get proxied over. smahbub's suggestion only directs where to find the settings for loggin. I have these enabled, but cannot seem to locate any setting that applies to the proxy distribution table. If anyone has any idea, it would be greatly appreciated.
Thanks,

ACS error, AAA Server is a referenced in the Proxy Distribution Table

When installing the ACS appliance (4.1) I have an issue where during the setup it prompts for a static address, Gateway, and DNS. This fine and network connectivity is tested during this time and success.
The issue seems to be fine but that when logging in to the GUI under Network Configuration>AAA servers.
AAA server AAA server IP address AAA server type
self 10.10.10.1 CiscoSecure ACS
ciscoacs 169.254.25.58 CiscoSecure ACS
Under Network Configuration>Proxy Distribution Table
Character String AAA Servers Strip Account
Default ciscoacs no Local
The 2 questions I have how to stop the 169.x.x.x address or why this is being put into the configuration, and how to delete as the following error is obsvered when trying.
ACS error when trying to delete..
âCan not Delete AAA Server, AAA Server is a referenced in the Proxy Distribution Tableâ
Many Thanks MJ

Go to,
Network configuration > Proxy Distribution Table > (Default).
swap the entry in this section under tables AAA Server and Forward to > Submit + Restart.
Then try to delete 169.x.x.x entry.
Regards,
Prem

Adding AAA servers to ACS to use Proxy RADIUS distribution Table

Hello,
I've added two non ACS radius servers (Radiator) to the AAA servers on Network Config, in order to use them on a proxy distribution table.
I had problems authenticating users through those servers and I did a sniffer trace on the outside interface of the ACS.
What I saw is that ACS sends packets to the AAA server configured as RADIUS on port 1645, not 1812, the expected standard, and port to which the others servers are listening to. How can I change this behaviour?
Thanks
Gustavo

ACS by default will listen on both ports 1645 and 1812, the two "standard" Radius ports. However, when talking to a proxy server it will only send them on 1645, by default. To change this you have to go into the registry and change it as follows:
Under [HKEY_LOCAL_MACHINE\SOFTWARE\Cisco\CiscoAAAv3.x\Hosts\\RADIUS] (where is the server you want to send the 1812 reuests to, and note that you may have to add the RADIUS key if it isn't there already), you can add the following:
"authPort"=dword:0000066e <<---- 1645
"acctPort"=dword:0000066d <<---- 1646
"timeout"=dword:00000001
"single connection"=dword:00000000
"strip users"=dword:00000000
You don't need all of them, you can just change the authPort to 1812 (714 in hex) and acctPort to 1813 (0x715) and you should be good to go. Make sure you reboot the server after making the registry changes. Keys are case-sensitive too so make sure you type them in EXACTLY as I've shown above.

Is is possible to join Invoice Distribution tables to GL or SLA ?

Hi,
We want to get the Sub Ledger (AP) Distribution Information and GL Details in one query. Is it possible to join GL/SLA Tables to AP Distribution Tables without using XLA_DISTRIBUTION_LINKS Table?.
Thanks,
Sunny

Hi Vamsi,
We are trying to populate all these following fields into one staging table.
AP_INVOICE_DISTRIBUTIONS_ALL.EXEPENDITURE_TYPE
AP_INVOICES_ALL.INVOICE_NUM
AP_INVOICE_DISTRIBUTIONS_ALL.PROJECT_ID
AP_INVOICE_DISTRIBUTIONS_ALL.TASK_ID
JE_HEADER_ID
ACCOUNTED_DR
ACCOUNTED_CR
GL_SL_LINK_ID
CODE_COMBINATION_ID.
Requirement is that SUM(ACCOUNTED_DR) and SUM(ACCOUNTED_CR) in the staging table for any particular JE_HEADER_ID should match with the JE HEADER AMOUNT.
This is an GL Outbound Interface and we are picking the posted journals for AP Subledger and Sending the Subledger Information along with the GL Information.
Can you please help me with this?
THanks,
Sunny

Recipient List Along with distribution

Dear Experts,
Is there any possible way i can send recipient list along with distribution. As i am distributing Engineering docs through distribution to client. It is INT type distribution client wants to know the recipients of this distribution as well. can this scenario be implemented or not.
Thanks
KD

Hi,
Function module that is called by customer exit CVDI0002 after the data for recipient list screen (screen 100, program SAPLCVV1 ) has been read.
Depending on the function (i_function) called, documents, recipients, or general data is determined. You can change this data in the include program. The modified data is then displayed on screen 100 (program SAPLCVV1 ).
If you change recipient data, for example, the changes must also be made in the following tables:
Table T_DRZA (document recipient relation)
Table T_REC (to display the change in the table control)
For more details on this refer link below
http://srm.quadrem.net/SAPHelp/helpdata/EN/e8/7e7e08663611d1949200a0c92f024a/frameset.htm
Small tweaking in the customer exit can help in achieving your requirement.
Hope this helps.
Regards,
Deepak Kori

ACS any Version with Domain Controller on Windows Server 2008 R2 64bit

Hi All
Is there currently any ACS version working with Windows Server 2008 R2 domain controllers?
Our server stuff has recently upgraded the Domain Controllers to 2008r2 and turned off the 2003 servers. This didn't make our ACS 4.1.4 really happy.
I've read now serveral posts regarding issues with ACS and Server 2008r2 and hope to find a solution (besides switching to LDAP, yukk).
Thanks
pato

Hi AllIs there currently any ACS version working with Windows Server 2008 R2 domain controllers?Our
server stuff has recently upgraded the Domain Controllers to 2008r2 and
turned off the 2003 servers. This didn't make our ACS 4.1.4 really
happy.I've read now serveral posts regarding issues with ACS and
Server 2008r2 and hope to find a solution (besides switching to LDAP,
yukk).Thankspato
Hi Pato,
Just check out the below link hope that help.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/release/notes/ACS42_RN.html
As per the link it says The support for Windows Server 2008 is applicable for ACS 4.2 Patch 4 onwards.
Hope to Help !!
Remember to rate the helpful post
Ganesh.H

Performance issues with pipelined table functions

I am testing pipelined table functions to be able to re-use the base_query function. Contrary to my understanding, the with_pipeline procedure runs 6 time slower than the legacy no_pipeline procedure. Am I missing something? The processor function is from [url http://www.oracle-developer.net/display.php?id=429]improving performance with pipelined table functions .
Edit: The underlying query returns 500,000 rows in about 3 minutes. So there are are no performance issues with the query itself.
Many thanks in advance.
CREATE OR REPLACE PACKAGE pipeline_example
IS
 TYPE resultset_typ IS REF CURSOR;
 TYPE row_typ IS RECORD (colC VARCHAR2(200), colD VARCHAR2(200), colE VARCHAR2(200));
 TYPE table_typ IS TABLE OF row_typ;
 FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
 RETURN resultset_typ;
 c_default_limit CONSTANT PLS_INTEGER := 100;
 FUNCTION processor (
 p_source_data IN resultset_typ,
 p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
 RETURN table_typ
 PIPELINED
 PARALLEL_ENABLE(PARTITION p_source_data BY ANY);
 PROCEDURE with_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ);
 PROCEDURE no_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ);
END pipeline_example;
CREATE OR REPLACE PACKAGE BODY pipeline_example
IS
 FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
 RETURN resultset_typ
 IS
 o_resultset resultset_typ;
 BEGIN
 OPEN o_resultset FOR
 SELECT colC, colD, colE
 FROM some_table
 WHERE colA = ArgA AND colB = argB;
 RETURN o_resultset;
 END base_query;
 FUNCTION processor (
 p_source_data IN resultset_typ,
 p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
 RETURN table_typ
 PIPELINED
 PARALLEL_ENABLE(PARTITION p_source_data BY ANY)
 IS
 aa_source_data table_typ;-- := table_typ ();
 BEGIN
 LOOP
 FETCH p_source_data
 BULK COLLECT INTO aa_source_data
 LIMIT p_limit_size;
 EXIT WHEN aa_source_data.COUNT = 0;
 /* Process the batch of (p_limit_size) records... */
 FOR i IN 1 .. aa_source_data.COUNT
 LOOP
 PIPE ROW (aa_source_data (i));
 END LOOP;
 END LOOP;
 CLOSE p_source_data;
 RETURN;
 END processor;
 PROCEDURE with_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ)
 IS
 BEGIN
 OPEN o_resultset FOR
 SELECT /*+ PARALLEL(t, 5) */ colC,
 SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
 SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
 SUM (CASE WHEN colD = colE AND colD != '0' THEN '1' END) de_one,
 SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
 FROM TABLE (processor (base_query (argA, argB),100)) t
 GROUP BY colC
 ORDER BY colC
 END with_pipeline;
 PROCEDURE no_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ)
 IS
 BEGIN
 OPEN o_resultset FOR
 SELECT colC,
 SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
 SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
 SUM (CASE WHEN colD = colE AND colD != '0' THEN 1 END) de_one,
 SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
 FROM (SELECT colC, colD, colE
 FROM some_table
 WHERE colA = ArgA AND colB = argB)
 GROUP BY colC
 ORDER BY colC;
 END no_pipeline;
END pipeline_example;
ALTER PACKAGE pipeline_example COMPILE;Edited by: Earthlink on Nov 14, 2010 9:47 AM
Edited by: Earthlink on Nov 14, 2010 11:31 AM
Edited by: Earthlink on Nov 14, 2010 11:32 AM
Edited by: Earthlink on Nov 20, 2010 12:04 PM
Edited by: Earthlink on Nov 20, 2010 12:54 PM

Earthlink wrote:
Contrary to my understanding, the with_pipeline procedure runs 6 time slower than the legacy no_pipeline procedure. Am I missing something? Well, we're missing a lot here.
Like:
- a database version
- how did you test
- what data do you have, how is it distributed, indexed
and so on.
If you want to find out what's going on then use a TRACE with wait events.
All nessecary steps are explained in these threads:
HOW TO: Post a SQL statement tuning request - template posting
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Another nice one is RUNSTATS:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701

Issue with Multiple Tables in Report

Post Author: dwessell
CA Forum: General
Hi,
I'm using Crystal Reports 2k8.
I'm doing a report with three tables, CQ_HEADER, SO_HEADER and SALESPERSON. Both the CQ_HEADER and the SO_HEADER tables link to the SALESPERSON table via a SPN_AUTO_KEY field.
However, I always receive duplicates in my result set, due to the joins made, and I don't receive results that are valid in one table, and empty in another (Such that it only counts a CQ, if there is a SO associated with it. Here's the query that's produced by CR.
SELECT "CQ_HEADER"."CQ_NUMBER", "CQ_HEADER"."ENTRY_DATE", "CQ_HEADER"."TOTAL_PRICE", "SALESPERSON"."SALESPERSON_NAME", "SO_HEADER"."ENTRY_DATE", "SO_HEADER"."TOTAL_PRICE"
FROM "CQ_HEADER" "CQ_HEADER" INNER JOIN ("SO_HEADER" "SO_HEADER" INNER JOIN "SALESPERSON" "SALESPERSON" ON "SO_HEADER"."SPN_AUTO_KEY"="SALESPERSON"."SPN_AUTO_KEY") ON "CQ_HEADER"."SPN_AUTO_KEY"="SALESPERSON"."SPN_AUTO_KEY"
WHERE ("CQ_HEADER"."ENTRY_DATE">={ts '2007-12-01 00:00:00'} AND "CQ_HEADER"."ENTRY_DATE"<{ts '2007-12-18 00:00:00'}) AND ("SO_HEADER"."ENTRY_DATE">={ts '2007-12-01 00:00:00'} AND "SO_HEADER"."ENTRY_DATE"<{ts '2007-12-18 00:00:00'})
ORDER BY "SALESPERSON"."SALESPERSON_NAME"
There is no link between the SO_HEADER and the CQ_HEADER. Can anyone make a suggestion as to how I could go about structuring this such that it doesn't return duplicate values?
Thanks
David

Hey,
I understand you used Retainsameconnection property true for all the OLEDB connections you used in the package if not make sure its for all the connection including file connection as well.
Additionally, you can try to set Delayvalidation property to true for all the dataflows and control flows in the connection and try running the package for 10MB file.
I hope this will fix the intermittent failure issue you are facing with SSIS.
(Please mark solved if I've answered your question, vote for it as helpful to help other user's find a solution quicker)
Thanks,
Atul Gaikwad.

Populating the cache with VPD tables fails

Using the Add Tables wizard I am trying to add tables to an Oracle Database cache. The tables have had RLS policies applied using the DBMS_RLS package. The Add Tables wizard fails with an ORA-28112 error (failed to execute policy function).
Are there any known problems with cacheing tables of a virtual private database?
Of course we want to cache an entire table, not just a portion as defined by that table's security policy. We have a procedure call that can cause the security policy to return a null predicate (effectively turning off security for all tables). We have set up a logon trigger to run this procedure for the user that populates the cache (we have done this successfully for other users), but we still get the error.
Any help?
Cache system:
SPARC/Solaris 8
9iAS 1.0.2.1
Oracle EE 8.1.7.0
Origin database:
SPARC/Solaris 8
Oracle EE 8.1.7.0
Thanks,
Steve

Steve,
In my opinion you should look first into the trace files. They are generally located under
USER_DUMP_DEST directory. I believe that this error normally generates a trace file. So in the trace file you can see that it was trying to do and what happened. Also this may be happening due to some permission problems as well e.g. logged user versus policy user etc.
HTH
Prakash
null

Problem with SUBMIT report [ WITH SELECTION-TABLE ] or [ IN range ]

Hello Everybody,
I am trying to call transaction F.80 for mass reversal of FI documents by using SUBMIT sentence and its parameters like this:
LOOP AT i_zfi013 INTO wa_zfi013.
    PERFORM llena_params USING 'BR_BELNR' 'S' 'I' 'EQ' wa_zfi013-num_doc ''.
range_line-sign   = 'I'.
range_line-option = 'EQ'.
range_line-low    = wa_zfi013-num_doc.
APPEND range_line TO range_tab.
endloop.
Line: -
      SUBMIT sapf080
        WITH br_bukrs-low = p_bukrs
        WITH SELECTION-TABLE it_params [ same problem with - WITH BR_BELNR IN range_tab]
        WITH br_gjahr-low = p_an1
        WITH stogrd = '05'
        WITH testlauf = ''
        AND RETURN.
My problem is that when the report is executed the BR_BELNR only delete one document of the all the inputs in the selection criteria from the loop. if I add the statement [ VIA SELECTION-SCREEN] in the SUBMIT if open the multiple selection criteria in the screen I can check that all the documents are set in it from the ABAP code in the loop from it I just need to push F8 to copy them and run the program processing all the documents normally .
Can some one help me with this? is there a way to execute the transaction BY the SUBMIT with the multiple selection criteria for the Document Number working well?
Thank for you time and help.

This is my code:
TYPES: BEGIN OF T_ZFI013,
          BUKRS     TYPE BUKRS,
          GJAHR     TYPE GJAHR,
          MONAT     TYPE MONAT,
          ANLN1     TYPE ANLN1,
          ANLN2     TYPE ANLN2,
          NUM_DOC     TYPE BELNR_D,
          DATE     TYPE DATUM,
          TIME TYPE UZEIT,
          USER     TYPE SYUNAME,
         END OF T_ZFI013.
   DATA: I_ZFI013 TYPE STANDARD TABLE OF T_ZFI013,
         WA_ZFI013 TYPE T_ZFI013,
DATA: br_belnr       TYPE BELNR_D,
        rspar_tab TYPE TABLE OF rsparams,
        rspar_line LIKE LINE OF rspar_tab,
        range_tab LIKE RANGE OF br_belnr,
        range_line LIKE LINE OF range_tab."range_tab.
LOOP AT i_zfi013 INTO wa_zfi013.
    range_line-sign   = 'I'.
    range_line-option = 'EQ'.
    range_line-low    = wa_zfi013-num_doc.
    APPEND range_line TO range_tab.
ENDLOOP.
SUBMIT sapf080
    WITH br_bukrs-low = p_bukrs
    WITH br_belnr IN range_tab
    WITH br_gjahr-low = p_an1
    WITH stogrd = '05'
    WITH testlauf = ''.
This is the RANGE_TAB table before submit:
1     I     EQ     1001xxxxxx
2     I     EQ     1002xxxxxx
3     I     EQ     1003xxxxxx
4     I     EQ     1004xxxxxx
5     I     EQ     1005xxxxxx
6     I     EQ     1006xxxxxx
7     I     EQ     1007xxxxxx
8     I     EQ     1008xxxxxx
I think this wont work for some reason so I will start to do this by a BDC.
Many thanks for your help.

Ability to query on all columns from a view with multiple tables

I have view with 4 tables. view has about 50 columns.
hypothetically, I want to build a form to give the user an ability to query on any of those 50 columns. user can search on one or more fields.
what is the best way to write the query to retrieve the results without performance impact.
please let me know if the question is not clear.

If you want to permit them to query any of 10 fields with no restrictions, you could create 10 separate single-column indexes. The optimizer would have to try to pick the best of these indexes if you specified multiple search criteria. But since you have a view which presumably means that you've got multiple other indexes involved for the underlying join conditions, you'd probably want/need to combine the column lists of the indexes you're adding for searches with the indexes you've created for joins, which requires looking at the text of the view and figuring out the best way to optimize the 10 single-column searches. Of course, it is possible that the optimizer could chose to do something like a b-tree to bitmap conversion on multiple indexes which could allow it to use multiple independent indexes for your queries, but that's generally not ideal performance-wise.
All this is a fancy way of saying that there probably isn't a cut and dried answer to your question. You need to figure out the queries you're trying to optimize (say, the 10 single-condition queries) and you need to figure out what set of indexes on the various underlying tables provides the best performance weighing those benefits against the cost on other side of maintenance during DML. Which is going to depend on the text of the view, the underlying tables, the existing indexes, etc.
Justin

Is there a way to have a "text box" stay with a table or chart?

I have multiple tables on one sheet. I understand that the table is named over in the left side of the screen. For what i need to do, I am looking at multiple tables on one sheet. Its easier to know which is which by having a text box above with its desctription. If I need to move that table I would like for the text box to move with the table it is for, rather than having to move them both seperately. Is there a way to like "merge" them together? I've selected the two together and looked for an option in the inspector & in the menu bar, yet still cant figure it out.
=/ help!!

For a table, you can use the Table Inspector to Show Name (checkbox near the top of the Inspector pane).
As seen above, the Table name can be formatted using a choice of font, size and colour (not changed in the example). To format, click on the displayed name to select its frame/box. Then use the controls in the format bar to chose font, set size and color, and set the background colour if desired.
I had finally just figured that out before I read this, after quite some time of messing around with it. Thanks for your quick response. Wish i realized these discussions were available when I first started using numbers! How very helpful!!
And to fireflyer, thanks for that advice I didnt know you can do that and I will be able to use that in many situations! =)

How can I bind a operation with a table

Hi !
I'm trying to bind a operation with a table, so what type of operation return ? ViewObject or a Vector? And how can i set params to these operation if my operation has some param ( getSubscriber(int iSubId, int iSubType) )
Thank a lot for your help

Hi,
it depends on the release you are asking this question for. In JDeveloper 10.1.3 you can expose a method (e.g. on a session facade) that returns a Collection. The input parameters can be dragged and dropped as input fields to the page.
The same can be done in JDeveloper 10.1.2, but here you have to prgrammatically apply the input arguments.
Frank

ACS v2.6 with Distribution Table

Similar Messages

Maybe you are looking for