Action Extension - Dynamic redirect

Hi,
I need to have an authorization policy on Access Manager that perform
a redirect to an url that changes based on user information.
I have taken a look to the Novell Access Manager Developer Kit. Anyway,
it looks like I can only define permit and deny action without a
destination url. Is it true?
Does exist a way to redirect the user to a specific url from an action
extension?
Thanks. Best regards,
Alessandro
afolli
afolli's Profile: http://forums.novell.com/member.php?userid=6964
View this thread: http://forums.novell.com/showthread.php?t=432170

Hi All,
the Technical Support confirmed that there is currently no way to
achieve this.
If you need a similar feature, you can create another Request For
Enhancement in the Requirements Portal ( www.novell.com/rms ).
Best regards,
Alessandro
afolli;2073871 Wrote:
> Hi,
> I need to have an authorization policy on Access Manager that perform
> a redirect to an url that changes based on user information.
>
> I have taken a look to the Novell Access Manager Developer Kit. Anyway,
> it looks like I can only define permit and deny action without a
> destination url. Is it true?
>
> Does exist a way to redirect the user to a specific url from an action
> extension?
>
> Thanks. Best regards,
>
> Alessandro
afolli
afolli's Profile: http://forums.novell.com/member.php?userid=6964
View this thread: http://forums.novell.com/showthread.php?t=432170

Similar Messages

Login User with Dynamic Redirect

Hi,
I have used the "Login User with Dynamic Redirect" with asp
VBScript. But
now I´m going to make a PHP/MySql site.
Does anybody know of a extension that can make dynamic
redirection from
logon page.??
/mike.

Michael wrote:
> I have used the "Login User with Dynamic Redirect" with
asp VBScript. But
> now Iï¿½m going to make a PHP/MySql site.
> Does anybody know of a extension that can make dynamic
redirection from
> logon page.??
You don't need an extension. The built-in Log In User server
behavior
does it.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

VSCO cam unable to provide action extension right inside of photos app on my iPhone 4s

Recently, I decided to check out VSCO cam on my iPhone 4s. The app worked fine on my device but I was little bit shocked when I was editing a photo and I noticed there was no extensions button at the top left corner of the screen.
and I remember Apple's Craig Federighi demonstrated the waterlog action extensions (VSCO cam was also there) right inside of photos app at WWDC.
So, I wanna know what kind of problem is this and is this happening with just my device?
and is there any way or how to get the action extension of VSCO cam right inside of photos app like it was demonstrated at WWDC
iPhone 4s 16GB Model
4GB free space available

Unfortunatley 5 GB is not necessarily a lot of space. What you should do is FIRST go into iCloud and choose what information you want turned on.
Settings >iCloud
Here you should see different Tabs that will let you select what you want to back up on your device. You have the option to back up the following data on your phone:
Mail
Contacts
Calendars
Reminders
Safari
Notes
Passbook
Photo Stream
Documents & Data
Find My iPhone
If you turn off some of these options you should free up some of your space.
Once you have backed up your device in iCloud, you can place your device in Recovery Mode in iTunes so it can be recognized.
To put phone in recovery mode: Hold down home button and power button at top of phone at the same time. Once you see the Apple on the device, CONTINUE to hold down the Home button. Plug your phone into iTunes. Do not let the Home button go until you see a message in iTunes stating that a device has been detected in recovery mode.

Dynamic redirect on successfull login

ok i have got the normal priviledge login working great but
what i would like to do is this..
i am using mysql/php and running on a test server win xp
using the phpdev server setup from firepages all working perfectly.
User table consists of several rows but the main one in
question contains a field called start_page with a url in the form
of /subdirectory/urlname.php this is a subdirectory of the
directory holding the login page.
what i would like to do is using the login behaviour if
possible redirect the customer (2 types) or admin to their own
start page (contained in the start_page field in the database
record).
i have tried using the parameter settings in login behaviour
to dynamically set the url from the record set (record set contains
the username password and start_page) however this just throws up
an error in the code.
the reason i want to do this is to eliminate the need for 3
separate forms to login each user type (which would work as i have
it that way now) however i would prefer to process the one login
form with the behaviour and dynamically redirect to the correct
start_page based on the record value..
ps i am ok with adapting code to a certain extent but am in
the process of getting to grips with php (normal asp coder)
thanks for your help in advance. these forums are a goldmine
tom

Sorry don't know PHP but in ASP I would add an 'access_group'
column in my db. On the login page I would then script the page to
allow username and password access to the start page and show items
depending on 'access_group' leve.
Perhaps something like:
<% If Session(""MM_UserAuthorisation") = "customer_type1"
Then %>
Redirect script or HTML to show appropriate information would
go here.
<% End If %>
Hope this is of some help. Forgive me it may not be the best
solution but along the lines of what I would try doing.
Jules

Extension: Dynamic Images/Advance Random Images

Hi there,
I have downloaded 2 extensions: Dynamic Images or/and
Advanced Random Images (kaosweaver.com); it seems both are the same
and I have used both, works very well when I open the page on
Mozilla Firefox but not on Internet Explorer and strange thing is
when the page is open on IE everything disappears and the only
thing can be seen is the page background!!!
Any suggestion to fix the problem would be appreciated. Thank
you.

Babri1,
As always, start by contacting the extension author. I'm sure
that Paul
Davis will help you out.
Randy
> I have downloaded 2 extensions: Dynamic Images or/and
Advanced Random Images
> (kaosweaver.com); it seems both are the same and I have
used both, works very
> well when I open the page on Mozilla Firefox but not on
Internet Explorer and
> strange thing is when the page is open on IE everything
disappears and the only
> thing can be seen is the page background!!!
>
> Any suggestion to fix the problem would be appreciated.
Thank you.

IOS 8: del.icio.us service in the Action Extensions pane?

I am an old time user of the del.icio.us online bookmark service (remember them!) and have been starved of it's services since switching to Safari. There are offerings but on iOS not so.
Only just recently did it dawn on me that one could be made compatible with Safari now iOS 8 allows for extensions in the "Action Extension" menu and was wondering (not being a developer myself) if del.icio.us could be made to work here?
The thing is all of the existing options appear to be a single click affair, while adding a webpage to the del.icio.us service requires input in the way of Tags from the user (either written or selected) and am unsure if it could be possible?
Thanks.

are you asking a question or did you just post a tutorial here? you might want to post it as a blog post or wiki entry instead.

Login dynamic redirect extension

so my problem is that every time i test it i get redirected
to the wrong password page i'm sure that my passwords are correct
etc
this is the code that the extension generates

that should be rather easy with ADDT:
<br />
<br />1. add another varchar field to your user_table to store the user´s "own specific page" URL, say "my_page"
<br />
<br />2. on the page that´s been defined as "default redirect on success" (say, success.php) in ADDT´s "Login Settings", define a query like e.g. "SELECT my_page FROM user_table WHERE user_id" equals the kt_login_id session variable.
<br />
<br />3. in case the session isn´t detected
<i>(it usually isn´t except for ADDT´s lists)</i>, add...
<br />
<br /><?php<br />session_start();<br />?>
<br />
<br />on top of "success.php"
<br />
<br />4. now simply make sure that your PHP redirection will contain the recordset value, like this:
<br />
<br /><?php<br />header('Location: '.$row_queryname['my_page'].'') ;<br />?>
<br />
<br />Never tried this myself, but to my understanding this should work -- if not, I´ll eat my hat, promised ;-)
<br />
<br />Günter Schenk
<br />Adobe Community Expert, Dreamweaver

How can I create an action that dynamically appends the filename, when saving?

I have created a batch file that watches a folder for .jpgs. When a jpg is found, it runs a Photoshop droplet that resizes and exports six different sizes of the same image, then closes the image. This all works fine, however the step I am stuck on is getting Photoshop to dynamically rename the files. What I mean is when I drop in a file named something like filename.jpg, I want the images to be named according to the width of resize. Exported files should be filename-1400.jpg, filename-1200.jpg, filename-800.jpg, etc. filename2.jpg would become filename2-1400.jpg, filename2-1200.jpg, filename-800.jpg. As it is now, Photoshop names the files the same names I saved them as, while creating the actions.
I am using Photoshop CS6.

What OS and verson of AI? Along with what Myle said, in the Actions panel is a column which allows the dialogs to be turned on/off. Make sure this is unchecked at all levels of the Action.

Can Soap Action be dynamically substituted in receiver side soap Action ?

Hi all
I am trying to place Action in Soap Receiver adapter.
I could see the THeaderSoapAction and the action I have specified in Dynamic Configuration and that action is not getting triggered
I was going through previous posts and Raj was mentioning that there was some problem with Soap Receiver adapter while dynamically placing Soap Action.
Is it so? Has anyone dynamically passed Soap Action using Adapter specific parameters?
If its cannot be achieved with ASP, What is the best alternate to this ?
Thanks and Regards,
Nikhil.

Have not tried this option, but theoretically it should work using the Adapter Specific message attributes
http://help.sap.com/saphelp_nw2004s/helpdata/en/29/5bd93f130f9215e10000000a155106/content.htm
Regards,
Prateek

Action forward for redirect

I have an website application. We are using Weblogic server.
The application is an online purchase payment gateway. The payment gateway is done by a third party.
Languages used : Struts, JSP and JAVA
i created one jsp(confirmPaymnt.jsp) like this and run from my server machine.
it is able to connect to the third party site and is able to pass values too(http://168.183.169.195).
confirmPaymnt.jsp:      -------------------
       <form name ="myform" action="http://168.183.169.195/Payment/eNetMainAPI.aspx" method="post" >
                <input type="hidden" name="merchant" id="merchant" value='<%= udb.getMerchant() %>'/ >
                   <input type="hidden" name="transaction_id" id="transaction_id" value='<%= udb.getTransaction_id() %>'/ >
                   <input type="hidden" name="amount" id="amount" value='<%= udb.getPrice() %>'/ >
          <input name="processpage" type="hidden" value="http://www.octopusplus.com/process.do" id="processpage" style="width:733px;" />
                    <input type="hidden" name="sec_key" id="sec_key" value='<%= udb.getSeckey() %>'/ >
                    <input type="hidden" name="op_post" id="op_post" value="false" />
       </html:form> If I try from some other machine, it is not running Since this url is for payment transaction ,they are configure with our server machine to third pary server machine.
So all the request to their server (http://168.183.169.195) needs to go throughour server.
So i tried like this in Struts-config.xml <action path="/redirectparam" type="com.hmh.action.RedirectParamAction"
        name="redirectparamForm
        input="/redirectparam.jsp"
        validate="false"
        scope="request">
        <forward name="success" path="http://168.183.169.195/Payment/eNetMainAPI.aspx" redirect="true"/>
     </action>
{code}
this is also not going with parameters.
please give me any solution.

One more requirement is that the parmeter to be passed needs to be in hidden format. when i tested , the parameters are shown in the address bar
ActionRedirect redirectActn=new ActionRedirect(mapping.findForward("success"));
      redirectActn.addParameter("merchant",merchant);
      redirectActn.addParameter("transaction_id",transaction_id);
      redirectActn.addParameter("amount",amount);
      redirectActn.addParameter("processpage",processpage);
      redirectActn.addParameter("sec_key",sec_key);
      redirectActn.addParameter("op_post",op_post);
      redirectActn.addParameter("md_flds",md_flds);
      redirectActn.addParameter("user_email",user_email);
      redirectActn.addParameter("backprocesspage",backprocesspage);
      redirectActn.addParameter("UDF1",UDF1);
      redirectActn.setPath("http://test/Merchant/Payment/eNetCpgMainAPI.aspx");
      redirectActn.setRedirect(true);Edited by: Makdu on Dec 1, 2010 11:00 AM

Taking Action on Dynamic Menu Selection

How do i get an action to take place when a menu item is
selected from a dynamic menu? I want to move to a specific record
item in my database based on the selection in the dynamic menu. Can
anyone help?

Thanks anyway. I'm sorry that Apple didn't include a "repeat" keyboard shortcut - going to the Inspector and then the actions wheel and then "delete row" time after time wasn't fun.
I'm afraid I failed to communicate well about outline format - I didn't mean a bulleted or numbered list, I do know how to do that, but rather making a single character (or in my particular interest a symbol, the diamond and heart suit symbols) appear in outline text format. You can do it by going to format->font->outline, but if I want to do it for several occurrences of the same thing (or a few different things), it's not much fun to do it that way. But maybe I can define a character format that's outline and that will work. Still would prefer to have a keyboard shortcut to apply the character format though.
Incidentally, while I'm talking about diamonds and hearts, is there any way to change the amount of space that gets put in after the diamond and heart symbols if you insert them using Edit->Special Characters? I write a lot of documents that use those symbols and lines end up unevenly spaced because of the large amount of space below each symbol (I've figured out a partial work-around - I defined a style for "body after suit symbol" that is raised enough to get the line spacing right, but that only works when I want to have a hard return at the end of the line with the suit symbols, since if the lines wrap, both lines have to have the same paragraph formatting. This problem isn't really Pages related - I have the same difficult with Word .

Markup- action extension doesn't appear

Hi all,
I've just downloaded and installed Yosemite on my iMac 27 (2012) model.
I have tried to use Markup on mail. But I've noticed that the tiny "arrow" done' appear.
I went to Apple>system preference>Extensions to activate "Actions"
But, it wasn't there. I only have:
All (empty)
Finder (only dropbox)
Today (social)
I have no idea how to add "actions" and other extensions in. Can you help me?
the most important for me is Markup.
Thank you!
Rotem

go to Terminal and post this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/support/lsregister -kill -seed
if it doesn't have that specific directory try this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -seed
once the scanning is done (can be short or long, depends on how heavy your system is) RESTART the computer.
when you're back, go to Apple>system preferences>extensions.... guess who's there.
I hope it helped.
The Doctor.

Dynamic Redirect

Can you someone help me create a login based on a mysql table that includes username password and url, and the user is redirected based on their username?
Do I create some kind of recordset base on the username? I tried to do it and the page does not even load. Can I get some kind of theory of this can be achieved using the ADDT? Or maybe even a walk through.

Hi,
I think this should be rather easy :: on the standard "redirect after login" page defined in ADDT´s Control Panel, you´d probably just need to...
1. add on line 1 to make sure that page will detect the ADDT session variables
2. add a query which will check the url against the currently logged in user´s "id" -- example:
"SELECT url FROM user_table WHERE id" equals the session variable "kt_login_id"
3. immediately after the query, and preceeding the pages "DOCTYPE html PUBLIC etc etc" html stuff, add a standard PHP redirection script, example:
now the somewhat tricky part will be to add the query´s "url" value to that redirection URL -- means you will have add...
$row_queryname['url'];
after e.g. the abovementioned URL´s trailing slash. As this approach is meant to add a dynamic variable inside an otherwise static value that´s already starting/ending with apostrophes (''), you assumingly will have to embed the variable within additional apostrophes as well, like this:
does this work ?
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Actions extension folder not appearing

So last week I downloaded the latest and greatest OSX 10.10... But I found an issue, and I'm not sure if I'm the only one, but in the extensions there isn't an "Actions" folder with plugins. I originally found out because I couldn't figure out how to get Markup working in the Mail app.
Here you can see my "Extensions" pane, and like I said, "Actions" does not appear.
What is the issue? Is there a solution to how to get the "Actions" folder and Markup up and running? Or should I just wait for a patch?

Working here, so I suspect a faulty installation. The only alternative is to reinstall. Hopefully, you saved a copy of that installer so you don't have to waste time, electricity, and bandwidth DLing the 5+ GB installer file again.

netui-data:pager action to dynamically fetch rows

Hi,
How can I configure a data grid pager to dynamically fetch new rows when a user swap pages through the pager?
I know I can fetch all my rows to a collection / array before rendering the datagrid and set the pager to iterate over it like this:
[Controller]
private List<Ride> rides;
public List<Ride> getRides() {
     return rides;
[Action]
rides = rideDBControl.getAllRides(); // huge amount of data
return forward;
[JSP]
     <div style="border-width:2px;"><netui-data:dataGrid name="currentRidesGrid" dataSource="pageFlow.rides">
          <netui-data:configurePager pagerFormat="prevNext" pageSize="${pageSize}" />
          <netui-data:header>
               <netui-data:headerCell headerText="Name" />
               <netui-data:headerCell headerText="Description" />
          </netui-data:header>
          <netui-data:rows>
               <netui-data:spanCell value="${container.item.name}" style="background-color: #f0f0f0;font-size:14pt;">
               </netui-data:spanCell>
               <netui-data:spanCell value="${container.item.description}">
               </netui-data:spanCell>
          </netui-data:rows>
     </netui-data:dataGrid></div>
But how can I make the pager call a method to update the contents of the collection "rides" according to the current selected page and page size? And how can I obtain the current page and page size inside that method?
I want to paginate queries that may return a huge amount of data (1m + rows), so, fetching all rows at once is impracticable. What I want to do is propagate the current page and page size from the pager to a method that will update the current collection according to a query such as:
Select X, Y, Z
From Table
Where ...
And ROWNUM BETWEEN page * pageSize AND (page + 1) * pageSize
Can anyone help a noob?

For further reference I've found the answer by myself.
To dynamically fetch rows you need to modify the <netui-data:configurePager> tag and include both a pageAction and partialDataSet attributes, e.g.:
<netui-data:configurePager pagerFormat="prevNext" pageSize="${pageSize}" pageAction="pagination" partialDataSet="true" />
Within the pagination action you can obtain the current row and page size from a PagerModel object. You can then update the dataSource (just remember to call the setDataSetSize providing the length of the full dataset so that the pager displays the correct amount of pages), e.g.:
@Jpf.Action(forwards = { @Jpf.Forward(name = "success", navigateTo = Jpf.NavigateTo.currentPage) })
     public Forward pagination() {
          DataGridStateFactory dataGridStateFactory = DataGridStateFactory
                    .getInstance(getRequest());
// Gets the pagerModel object for the grid
          PagerModel pagerModel = dataGridStateFactory.getDataGridState(
                    "currentRidesGrid").getPagerModel();
// => Code to get the entire dataSource size <=
          pagerModel.setDataSetSize(dataSourceSize);
          // Obtain the first row and page size from the model
          int firstRow = pagerModel.getRow();
          int pageSize = pagerModel.getPageSize();
          // => Code to fetch the rows to be displayed <=
          rides = pageRides;
          Forward forward = new Forward("success");
          return forward;
I hope this helps.
Cheers

Action Extension - Dynamic redirect

Similar Messages

Maybe you are looking for