Action Plan
Hi Everyone,
I got this action plan from metalink :)
ACTION PLAN
===========
1. Login to the Workflow builder and then check if the AP Invoice workflow got loaded onto the data
base or not.
2. Check if there is a corresponding event created in WF_DEFERRED queue after you initiate approval for the invoice.
To look at the WF_DEFERRED_EVENTS you can use the following navigation -
Workflow > Event queue summary.
3. If there are no events in the WF_DEFERRED queue, please check if there are any events in WF_ERROR queue.
If you find events in the error queue, run the WFSTATUS.sql script and WFSTAT.sql and check what's the cause
of the error and correct the same.
4. If the Invoice has crossed this stage, you could run the WFSTATUS.sql and WFSTAT.sql scripts to see what's the
status of the Invoice in the workflow. If that does not show any errors, run the Workflow agent li
stener.
Check if the workflow agent listener picks up this event
5. Ensure that there is a value given in the requester field in the Invoice.
Please ensure that the employee name entered here is defined in HRMS as the validation is
done against values defined
in HRMS.You will have to use the FOLDER menu to show the REQUESTER field.
Where do I get this WFSTATUS.sql and WFSTAT.sql
Support did not give details about it :(
Thanks a lot
Thanks Hussein....
ACTION PLAN
===========
Article-ID: Note 460994.1
Circulation: MODERATED (INTERNAL) ***Oracle Confidential - Internal Use Only***
Folder: EBS.Fin.Payables.Invoices
Applies to:
Oracle Payables - Version: 11.5.10.2
This problem can occur on any platform.
Symptoms
On 11.5.10.2 in Production:
When attempting to run APXSUIMP process (Supplier Open Interface Import)
the following error occurs.
ERROR
MSG-00001: After SRWINIT
MSG-00002: After Get_Company_Name
MSG-00003: After Get_NLS_Strings
REP-1419: 'beforereport': PL/SQL program aborted.
Cause
There is no data on AP_SUPPLIERS_INT table, and also, nothing rejected.
select VENDOR_INTERFACE_ID, VENDOR_NAME, ENABLED_FLAG,REJECT_CODE
from AP_SUPPLIERS_INT
where status = 'REJECTED';
Solution
The supplier import is no longer erroring out after setting the Receiving Options for the
Master Org in the Inventory Org set-up.
"setting the Receiving Options" is quite vague for me :(
Isn't it?
Thanks
Similar Messages
-
Please tell me the action plan for this
I am trying to run a query against the AUCA_AP_ACCRUAL_STG table and I get an error that the table does not exist. Please make the table available for queries
how i will check thiswhat action plan need for this nay body plz suggest me.
Thanks,
PreetamWhich user are you connecting and which user is the owner of the table ?
Check whether the table is existed on ALL_TABLES. -
Is there any standard extractor to extract Assessment and Action Plan deta
Hi
Is there any standard extractor to extarct HR assessment details from the table PA9220 and Action Plan details from the table
PA9221.
Please advise.
Thanks in Advance.Select-options:
u2022 Plant
u2022 Creation date
Select document number from EDIDC (transparent table) into an internal table by:
u2022 Direction (in/outbound)
u2022 Receiver port
u2022 Partner type of receiver
u2022 Message type
u2022 Creation date
u2022 IDOC type
u2022 Partner function of receiver
Then loop on the internal table
- For every step use FM: IDOC_READ_COMPLETELY
- This will return 2 tables per IDoc, which you can use any which way you like
- Append your ALV table with the info you need.
Display ALV -
Sharepoint List of action plan not load all the rows,
hello
we are using sharepoint 2010 , we are facing problem in loading list_of_action_plan that not load all the raws (data)in datasheet view, but in standard view its loads all the data,
can some one helps in this problem
We have one separate virtual machine SQL server 2005 for sharepoint server. also we check that SQL server instance use more CPU usages.Hi,
According to your post, my understanding is that one of your custom columns could not be copied using the copy list item action.
I had created a custom field using the URL type, then add the column into the list.
Using the SharePoint Designer to create a custom workflow with the copy list item action.
The workflow worked without any issue, it can copy the custom URL type field.
Did the issue occur in other list? You can create a new list, add the custom field to the list, then just using the copy list item to check whether it works.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
Good evening, technet community
I hope you are doing well.
When configuring my SharePoint workflow, I encounter the problem below:
Problem Description:
Let's say my domain is: test.com, my group user is: test\group , my user is: test\user1
Except an admin account with full control at both "Web Application" and "Site Collection", all others account all have problem when creating a list item. After creating a list item, the workflow status is "cancelled" immediately
with the following message:
RequestorId: 262a35e4-99f4-40f0-929b-5d04b415f147. Details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["10"],"SPRequestGuid":["262a35e4-99f4-40f0-929b-5d04b415f147"],"request-id":["262a35e4-99f4-40f0-929b-5d04b415f147"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Thu, 06 Nov 2014 12:14:28 GMT"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
{"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have permission to perform
this action or access this resource."}}} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor,
BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
- The workflow is still fail even I assign "full control" to my users group "test\group" – at Site Collection level.
Surprisingly, I have successfully found a solution for this error message. However, I still have some points that I do not clearly understand. Let's start with my solution first.
Solution:
*** i. Assign permission policy at Web Application level – Central Admin site ***
1. Central Administration ==> Application management
==> Manage Web application
2. Go to "permission policy", then create a new permission level. This permission level contains all "edit item" permission.
3. Select "user policy", then I assign it directly to my user account: test\user1.
*** ii. Assign "edit item" permission at Site Collection level ***
1. Site Setting ==> Site permission
2. Assign "Edit" permission to my test\group.
(Actually I removed all permissions of my user group at Site Collection level. It seem my group has inherited permission from Web Application level, is that correct? )
*** iii. Create a new list item and workflow runs ……. ***
==> My question is:
1. Why I cannot assign permission to my users group - "test\group" -
at "Web Application" level? Instead I have to assign permission policy for each users, one by one?
2. Could you please let me know how to collect full detail error message of workflow status?
Thank you very much! Have a nice weekend.Thank you for your very detail response.
Point 1: Yes my 2 service: user profile & profile sync service are running. I performed "full synchronization" as well. Actually i've tried 3 another action plans before coming up with the solution i posted:
*** Actions completed ***
1. Activate the feature: workflow can use app permissions.
Site actions > Site Settings > Site features >activate the feature below:
Workflows can use app permissions
2.
Refresh trusted security token services metadata feed
Get-SPTimerJob
"RefreshMetadataFeed"
| Start-SPTimerJob
- then restart the machine.
3. Start full user profile synchronization.
Point 2:
- Yes my user had Edit permission at workflow task list + list affected by workflow.
I have just remove all permissions of my user at "Site Collection" level. However, when i show my user permissions at my workflow task list and my users still have "Edit" Permission ( assigned at Web Application level. These permissions
still exist even after my workflow task list stop inheriting permission).
==> the problems probably belongs to "permission" at "Site Collection level". It seems "permission level at my Site Collection does not work". All users accounts are also suffer from the same issues except farm admin account
( which has full control at Web Application level).
I would appreciate if your guys can guide me how to make "permission" at my "Site Collection level" work again?
Thank you very much. -
Upgrade plan for e business suite r12.0.6 on 10.2.0.3
hello all,
i am planning to upgrade our existing set i.e. e business suite r12.0.6 running on 10.2.0.3.
i like to first apply on clone database to test and verify the procedure.
for that i have created close database on same machine.
machine 1:
/data1/PROD --- prod directory represent production database
/data1/DEV -- dev directory represent testing database.
my question are follow
1. it is ok if i upgrade 11gr2 on dev in same machine, will it effect my existing PROD database ???
2. please advice me action plan or document which help me with the step for upgrade.
OS: LINUX REDHAT 5
DB: 10.2.0.3
APPS: R12 12.0.6
thanksThank you for your reply husain.,
i don't have spare or another server., so i have to do testing the same machine., apart from performance is there any other impact on running production database.?
and will you please help me where to start...
i already read the notes and i have following doubts
Verify software versions
The following software component versions must exist in your environment.
Software
Minimum Version
Tier
Details
Oracle Database Enterprise Edition
N/A
Database
Read the "Determine the Upgrade Path" subsection in Chapter 2 of the Oracle Database Upgrade Guide 11g Release 2 (11.2). Make sure that direct upgrade is supported from your current release.
--> This part i understood. I m going to use DBUA. from 10.2.0.3 to 11.2.0.3
Oracle E-Business Suite
12.0.4 or 12.1.1 with 9868229, 10163753 and 11071569
Application
If you are on E-Business Suite Release 12.0, apply
Patch 6435000 - Oracle E-Business Suite 12.0.4
Patch 8623536 - 11g Release 2 interoperability patch for Release 12.0.4
Patch 9868229
Patch 7303030 - Oracle E-Business Suite 12.1.1
Patch 9062910 - 11g Release 2 interoperability patch for Release 12.1
Patch 8919489 - 12.1 TXK Delta 3 patch
Patch 9868229
Patch 10163753
Patch 11071569
If you are on E-Business Suite Release 12.1, apply
---> I m not clear with this part., do i need to do anything (i mean i need to apply any patches).
because we already in 12.0.6. (Please advice).
Demand Signal Repository (conditional)
12.1.2 with 9182368
Application
If you are using Demand Signal Repository (DSR), apply
Patch 7303033 - Oracle E-Business Suite 12.1.2
Patch 9182368
--> We are not using DSR so i think i can ignore this part.
Oracle Warehouse Builder (conditional)
11.2.0.1 with 9403153
Warehouse Builder Database
If you are using Oracle Warehouse Builder (OWB) 11g Release 2, apply OWB 11g Release 2 (11.2.0.1) and Patch 9403153. The following E-Business Suite Release 12 products use OWB 11g Release 2:
Oracle Demand Signal Repository (DSR)
Oracle Manufacturing Operations Center (MOC)
Oracle Balance Scorecard (BSC)
--> we are not using OWB., so i think we can ignore this part.
AutoConfig
Latest version with 9852070, 9738085, 11692965, and 12686610
Application
Implement AutoConfig or upgrade to the latest version. See Using AutoConfig to Manage System Configurations with Oracle E-Business Suite Release 12 on My Oracle Support for instructions. If you are on Oracle E-Business Suite Release 12.1, apply patches Patch 9738085 and Patch 9852070.If you are on the IBM Linux on System Z platform and on Oracle E-Business Suite Release 12.1, apply Patch 11692965.
Apply Patch 12686610 (for Oracle E-Business Suite Release 12.0 and 12.1).
---> I didn't understand this part completely, but what i understood is.. i need to apply PATCH 12686610 and to apply this patch i need to apply two more pre-req patch: (Patch R12.TXK.A.delta.7: R12.TXK.A.DELTA.7)
Daylight Saving changes
N/A
Database tier
See Complying with Daylight Saving Time (DST) and Time Zone Rule Changes in E-Business Suite 12 on My Oracle Support for instructions.
--> i didn't understand this part completely.
DirectX
9.0b
Windows customers ONLY - Database tier
On Windows, run the DirectX diagnostics tool DxDiag.exe in c:\windows\system32. If you receive a generic error opening the display adapter information, use the Windows update tool to upgrade to DirectX 9.0b.
---we can ignore becuaes we are on linux.
hope you reply. -
Project Plan for EAM analytics implementation.
Hi Experts,
My Boss has asked me to provide him the project plan for this EAM analytics implementation, showing how long will it take for the dashboards to be up with the correct data.
Reason why he is asking this is because initial configuration has been done in BI Apps but prima facie looks like the DATA on dashboards is not correct.
Now he is worried as to how long will it take... and even i am not sure on this as I am new to this..( i m the only one configuring EAM Dashboards - ie only one resource )
Any experiences or helpful advise for this kind of scenario that i can tell my boss or what should be my action plan.
Thanks
AshishAny pointers?
-
Dear Experts,
Can anybody brief me while implementing the SAP system in any Company. After implementation of MM & FICO Module from where exactly the PM Consultant start his activity. I want to know what is his first action plan ?
ARHi,
1.First You need to study the Organisation Structure of FI & MM , like Client , Company Code , Business Area , Maintenance Plant & Locations every thing done in Spro- sap Custom Implemenatation guide - Enterprise Structure.
Check for Cost Center , Profit Center , Activity Type , Cost Element with FI guy.
2.Then You need to refer to blue print for Buisness Process , Gap identification.
3.Then you need to define Plant Maintenance organisation Structure like Maintenance Plannnging Plant ,location , Work Center , Planner group , Plant Sections.
4.After that Prepare Funct loc , Equip , Customisation of Order ,Notification , Maintenance Plan category .................
You should keep in mind what Plant Maintenance report Client needs at end based on that you need to work
Regards,
Edited by: Srinivas Narayana Gowda on Jul 7, 2009 9:19 AM -
Hi Gurus,
Can some one please explain what are <b>Personal Actions in Organizational Management</b>, how are they useful, how are they configured in SAP.
Thanks for all the help in advance.
KrishnaDear Krishna!
In this step, you make the system settings necessary for setting up a personnel action.
A personnel action is a collection of several logically connected infotypes in the system which, in an exact sequence, are used for processing and are used for a particular system activity (see "Create Organizational Unit", for example).
Personnel actions are identified by a key.
You assign the following to each step of a personnel action:
a plan version
an object type
an infotype or subtype
a status
default values for screen entry
You also control, which Function codes are used by an infotype (within a personnel action).
In a transaction controlled by a personnel action (PQ*) , you must determine the object types for which the action is to be executed. For each transaction related to an object type and controlled by a personnel action, specify which default personnel action(PQ*M) is to be processed by the corresponding transaction.
For each default personnel action within a transaction controlled by personnel actions, you can access a Process description.
<u><b>Example</b></u>
Personnel action "Create organizational unit":
Personnel action Plan ver. ObjType Infotype Subtype FCode VarField
O ** O 1000 INSE
O ** O 1002 0001 INSE
O ** O 1003 INSE
O ** O 1001 A011 INSE K
The personnel action "Create organizational unit" includes the following steps:
Creating the "Object" infotype (1000)
Creating the "Description" infotype (1002) with the "General Description" subtype (0001)
Creating the "Department/Staff" infotype (1003)
Creating the "Relationship" infotype (1001) with the "Cost Center Assignment" subtype (A011) for object type "K" (Cost Center).
<u><b>Activities</b></u>
1. Create the required personnel actions.
2. For each personnel action, determine the following:
Corresponding object type
Required infotypes and subtypes
Function code (INSERT, COPY)
The plan versions for which the personnel action is to be valid
The planning status in which the objects are to be created.
Entering default values is optional.
3. Enter the object type that is to be processed as well as the key of the personnel action for the transaction to be controlled by a personnel action.
Further notes
Ensure that you arrange infotypes in a logical order when defining a personnel action. The "Object" infotype must always be processed first and must have line number "001".
A personnel action may only be defined for one object type.
You can create three-digit personnel actions between "001" and "999".
I hope this makes you rock!
Zsolt ) -
Masss Scheduling of Planned Order
Hi
Is there is any transaction for Mass Scheduling of Planned orders preferabaly at plant level.?Dear Mayuresh,
In my understanding there is no T Code to schedule as set of planned orders
This will impact on the other reciepts and only during MRP rescheduling happens.
But also have a check the FM that Mr.Brahmankar has suggested.
Dear Rupesh,
Do u think even if you have an action plan and execute MDAC will it help to schedule the planned
orders?
Regards
Mangalraj.S -
What is Start Condition is Actions
Hi Gurus
What is Start Condition in Actions?
Thanks
MahiHi Mahesh,
An Action is only started when you define a Start Condition for that Action. And also that start condition gets triggered for that Action that Activity will start.
Below is complete example that will help you to understand this scenarios better.
You create a transaction, for example, a contract, or a marketing object, for example, a marketing campaign. The processing of actions can be structured in three segments:
Planning Actions
Starting Actions
Monitoring Actions
Planning Actions
The system uses the action profile assigned to the transaction type to check which actions are possible for the transaction. If you are working in CRM Marketing, you have assigned an action profile to a marketing object in the Marketing Planner beforehand.
The system checks if the schedule conditions are fulfilled, and for which actions. The following takes place when the schedule conditions are fulfilled:
The system enters actions with the indicator Schedule Automatically into the action list in the transaction document or marketing object. They are active.
You can manually add (schedule) other actions from the profile. They appear in the input help in the action list. They are inactive.
You can schedule actions with the indicator Display in Toolbar using the application toolbar of the document. They are also inactive. There is further information in processing actions using the application toolbar.
It is only possible to start scheduled actions.
Starting Actions
When the start conditions are fulfilled, or if no start conditions have been defined, the system triggers the action at the processing time defined in Customizing.
The following possibilities are available for starting:
starting automatically
The system triggers the action automatically when the start condition for a scheduled action is fulfilled.
starting manually via the action list
You have to have selected the indicator Execute in Dialog in the action definition for this function.
You start the action from the action list using the symbol Execute Action.
starting manually via the application toolbar for sales transactions, and via the Object Services toolbar for marketing objects
You have to have defined the indicator Display in Toolbar and the processing time as Immediate in the action definition for this function.
You start the action using the Actions pushbutton in the application toolbar for sales transactions and in the Object Services toolbar
When starting the action the system uses the processing medium (method or Smart Form or workflow) preset in Customizing.
Monitoring Actions
On the Actions tab page in the transaction document, you can continually monitor which actions are planned or have already been started and executed. There is further information under action list.
You can change condition and processing parameters for start conditions in the action list for actions which have been flagged in Customizing as Changeable in Dialog .
You can monitor and start actions of several transaction documents or marketing objects using the action monitor. There is further information under action monitor.
For complete information on Action Management have a look at the following link:
http://help.sap.com/saphelp_crm50/helpdata/en/54/238e39e1ba3541e10000000a11402f/frameset.htm
Thanks and Regards,
Samantak.
Rewards points for useful answers. -
Reporting Services Error activating ReportingWebService.svc in SharePoint 2013
I get below error when i tried accessing System Settings after creating Reporting Services Service Application in SharePoint 2013, looked in to many blogs but didn't find any fix
tried https://social.msdn.microsoft.com/forums/sqlserver/en-US/c2066c96-d8d0-46b5-89ff-abd806b3169d/reportingwebservicesvc-could-not-be-activated
tried http://sharepointconnoisseur.blogspot.com/2014/07/how-to-resolve-requested-service-http.html
and also tried http://sharepoint.stackexchange.com/questions/80118/sharepoint-2010-reporting-services-integration-set-server-defaults-error
but nothing worked
The Error is:
The requested service, 'http://localhost:32843/99f510a2628e4f24a5dbde00a57f0cbb/ReportingWebService.svc' could not be activated. See the server's diagnostic trace logs for more information.
Error Log:
Application error when access /_admin/ReportServer/ReportingServicesSystemSettings.aspx, Error=The requested service, 'http://localhost:32843/9a9f58cdb5b34551921277056e5ebc82/ReportingWebService.svc' could not be activated. See the server's diagnostic trace
logs for more information. Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.ReportingServices.ServiceContract.IReportServiceManagement.GetSystemProperties(ICollection`1 properties)
at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.<>c__DisplayClass9.<GetSystemProperties>b__8(IReportServiceManagement mchannel)
at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.DoManagementChannelCall(Action`1 caller)
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.get_SystemProperties()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.LoadSettings()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
System.ServiceModel.ServiceActivationException: The requested service, 'http://localhost:32843/9a9f58cdb5b34551921277056e5ebc82/ReportingWebService.svc' could not be activated. See the server's diagnostic trace logs for more information. Server stack
trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.ReportingServices.ServiceContract.IReportServiceManagement.GetSystemProperties(ICollection`1 properties)
at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.<>c__DisplayClass9.<GetSystemProperties>b__8(IReportServiceManagement mchannel)
at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.DoManagementChannelCall(Action`1 caller)
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.get_SystemProperties()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.LoadSettings()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ServiceModel.ServiceActivationException: The requested service, 'http://localhost:32843/9a9f58cdb5b34551921277056e5ebc82/ReportingWebService.svc'
could not be activated. See the server's diagnostic trace logs for more information. Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.ReportingServices.ServiceContract.IReportServiceManagement.GetSystemProperties(ICollection`1 properties)
at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.<>c__DisplayClass9.<GetSystemProperties>b__8(IReportServiceManagement mchannel)
at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.DoManagementChannelCall(Action`1 caller)
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.get_SystemProperties()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.LoadSettings()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)Hi MOSSDeveloper1,
Below is our suggestions:
1, try to open the URL in the Browser directly, then to see what happen. Maybe you can do the next action plan based on the error message in the Browser.
http://localhost:32843/99f510a2628e4f24a5dbde00a57f0cbb/ReportingWebService.svc
2,Try to get the application pool id based on the Reporting Web Service id "99f510a2628e4f24a5dbde00a57f0cbb"
Locate The Web Service in the sharepoint Web services in IIS, then click the advanced setting, you would see the application pool id;
Then Browse IIS manager "Application Pool", select the pool with the ID , restart it.
3,If the above two didn't helpful. tried to reboot the server or the steps below.
Update the web.config in the service host IIS web site and add the following. Set minFreeMemoryPercentageToActivateService to a lower percentage.
<configuration>
< system.serviceModel>
< serviceHostingEnvironment multipleSiteBindingsEnabled=”true” minFreeMemoryPercentageToActivateService=”1″/>
< /system.serviceModel>
< /configuration> -
Adobe Rich Web Experts Speaking at India's Biggest Independent Technology Event
Great Indian Developer Summit is India's Biggest Polyglot Conference for IT Professionals
Bangalore, March 25, 2010: At the 2010 edition of Great Indian Developer Summit learn how browser and rich web technologies such as AJAX, DHTML, Mashups, Web 2.0, Enterprise 2.0 technologies, and Rich UI technologies are making money and gaining market-share for some of the leading businesses in the world. On 21st and 23rd April 1010, Rich Web experts from Adobe will speak about the changing face of web applications, enriching cloud applications with Adobe Flash, agile interaction design, developing multi-screen applications on Flash, building enterprise RIAs with Flex and Java, building data centric applications and killer RIAs with PHP and Flex. The summit will be held at the Indian Institute of Science in Bangalore.
Ramesh Srinivasaraghavan, who leads the Adobe Flash Platform Evangelism initiatives of Adobe India, will keynote on the state of art in web application development and identify trends that could transform the way we create and use web applications. He will also conduct a separate session exploring the role that RIA technologies play in the new paradigm of developing applications for the cloud.
The ubiquity of Adobe's Flash Player and AIR spans the spectrum of Web, Desktop, Mobile and devices such as set top boxes. Flash Engineer Hemanth Sharma will lead attendees through the development workflow for building multi-screen applications. In a separate session, Sujit Reddy explains model-driven and code-driven development approaches to build data-centric applications with Adobe Flex and Java. Also discover how you can migrate your existing J2EE applications to Adobe Flex based RIA's easily. Computer Scientist Harish Sivaramakrishnan, popularly known as flexgeek, will lead attendees on a whirlwind tour of Adobe Flash Catalyst - a sparkling new tool which he says is the best thing that happened to the designer-developer collaboration after sliced bread.
On 23rd April while Prashant Singh conducts a 180-minute workshop on Data Centric Development features of Flash Builder and how to use them to create a Rich Internet Application powered by Java, Shyamaprasad will teach how to build PHP powered rich Internet applications using Flex. Starting off by setting up the Zend framework he will demonstrate how to build a complete Flex application that connects to a PHP server, using version 4 of Flash Builder.
On 21st and 23rd April 2010, at GIDS.WEB Conference & Workshops learn how browser and rich web technologies such as AJAX, DHTML, mashups, Web 2.0, Enterprise 2.0 technologies, and Rich UI technologies are making money and gaining market-share for some of the leading businesses in the world.
About Great Indian Developer Summit
Great Indian Developer Summit is the gold standard for India's software developer ecosystem for gaining exposure to and evaluating new projects, tools, services, platforms, languages, software and standards. Packed with premium knowledge, action plans and advise from been-there-done-it veterans, creators, and visionaries, the 2010 edition of Great Indian Developer Summit features focused sessions, case studies, workshops and power panels that will transform you into a force to reckon with. Featuring 3 co-located conferences: GIDS.NET, GIDS.Web, GIDS.Java and an exclusive day of in-depth tutorials - GIDS.Workshops, from 20 April to 24 April at the IISc campus in Bangalore.
At GIDS you'll participate in hundreds of sessions encompassing the full range of Microsoft computing, Java, Agile, RIA, Rich Web, open source/standards, languages, frameworks and platforms, practical tutorials that deep dive into technical skill and best practices, inspirational keynote presentations, an Expo Hall featuring dozens of the latest projects and products activities, engaging networking events, and the interact with the best and brightest of speakers from around the world.
For further information on GIDS 2010, please visit the summit on the web http://www.developersummit.com/
A Saltmarch Media Press Release
E: [email protected]
Ph: +91 80 4005 1000Im not sure if this is the right place to post this, but anyway thanks for the info :)
-
Upgrade 8.0.6 to 8.1.5 intrusctions for NT
Does anyone have instructions for upgrading Oracle 8.0.6 to 8.1.5 on NT?
Thanksserver A is dedicated for oracle database ( oracle database is 10.2.0.3)
server B is dedicated for oracle application. ( oracle 12.0.6)
oracle application installed on two server like below
concurrent server are installed on (server A)
and all others component installed on (server B)
i need to upgrade from 12.0.6 to 12.1.1
for that i have below question
1. what is the upgrade path should i use1) Upgrade 12.0.6 to 12.1.1
Oracle E-Business Suite Release 12.1.1 Maintenance Pack Installation Instructions [ID 752619.1]
2) Upgrade 12.1.1 to 12.1.3
Oracle E-Business Suite Release 12.1.3 Now Available
https://blogs.oracle.com/stevenChan/entry/ebs_1213_available
3) Upgrade your database to 11.2.0.3 – Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]
Please note that you can upgrade your database prior to 12.1.1/12.1.3 upgrade.
2. 12.1.1 is latest release ?No, 12.1.3
3. anyone can suggest me any action plan .Already did above.
4. i have two full days to down our application , 2 days is enough or do i need more time?Depends on the hardware resources you have. How many CPUs are running on the server?
Please try this upgrade in a TEST instance which has a resources close to your production to estimate the time it takes.
Thanks,
Hussein -
COncurrent process fails with warning for OPP
Concurrent process generates xml output (version 5.6.2) .
When it tries to publish it , the log suggests checking out the OPP log.
The OPP log has a series of java entries for the request, including one of the type
Caused by: oracle.xdo.parser.v2.XPathException: Expected 'QNAME' instead of ''.
header of the OPP log says
Resolution History
18-OCT-06 20:36:05 GMT
Can you easily recover from, bypass or work around the problem? = NO
Does your system or application continue normally after the problem occurs? =
YES
Are the standard features of the system or application still available; is the
loss of service minor? = YES
### Informational Only:Warning Presented to Customer ###
You chose 'Other technical issues with this product' from the Type of Problem
list. This is a generic Service Request form which will require additional time
to be routed appropriately. You may be able to expedite the resolution of your
Service Request by doing the following: 1. Use your browser’s back button to
return to the Create a SR – Brief Description page. 2. Select an option from
the Type of Problem list that more closely describes the problem.
### Requested files:ACT(Note 183274.1),RDA (Note 175853.1). Files to be loaded.
None
### Detailed Problem Statement ###
Concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.
Attached are OPP Manager log file, Screen shot of 'Preview' output jjst before
submitting request. Also log file of failed concurrent request which contains
standard error " See OPP Service log file for more".
### Steps to Reproduce Problem ###
Registered a concurrent process with XML template , and running the process
from Receivables Manager responsibility.
Ran concurrent process for 1) Standard RAXINV report , with output method as
'XML'. 2) Customised RAXINV report, with output method as 'XML'
### Instance Name(s) and Type of System(s) Where Error Occurs ###
Lunix, 11.5.10 on 10g
### Recent Changes to this Environment ###
None
### Workarounds Used ###
None
### How is this Issue Impacting Your Business ###
Business is readying for CRP3, so would like to have reports ready by then.
Contact me via : MetaLink
18-OCT-06 20:48:07 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\XML_Pub1.bmp
18-OCT-06 20:49:14 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\XMLPublisher_java.t
xt
18-OCT-06 21:17:26 GMT
Hi Bashobi,
Thank you for using MetaLink. We are currently reviewing/researching the situation and will update the SR as soon as we have relevant information
Best Regards,
Bill
Oracle Support Services
STATUS
=======
@WIP -- Work In Progress
18-OCT-06 21:18:04 GMT
Email Update button has been pressed: Sending email to [email protected].
18-OCT-06 21:21:45 GMT
ISSUE CLARIFICATION
====================
On 11.5.10.2 in Production:
Find concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.
EXPECTED BEHAVIOR
Expect the processes run successfully
STEPS
The issue can be reproduced at will with the following steps:
1. Registered a concurrent process with XML template .
2. Run the process from Receivables Manager responsibility.
3. Ran concurrent process for
1) Standard RAXINV report , with output method as 'XML'
2) Customised RAXINV report, with output method as 'XML'
BUSINESS IMPACT
The issue has the following business impact:
Business is readying for CRP3, so would like to have reports ready by then.
ACTION PLAN
============
Hi Bashobi,
1. Can you reproduce the issue from sysadmin responsibility with Active users report? if yes
please upload OPP log file after reproduce it and upload the request log file.
Thanks.
18-OCT-06 23:09:02 GMT
New info : [email protected] : Did the same as suggested, Request
completes successfully.
But what is the relation between Active Users report and a report sent via XML
Publisher?
19-OCT-06 15:54:26 GMT
ACTION PLAN
============
Hi Bashobi,
1. When you reproduce the issue from sysadmin responsibility with Active users report change the format out put to XML,
Save your change:
2. Upload OPP manager log file and upload the request log file.
Thanks,
Bill.
19-OCT-06 15:54:33 GMT
Email Update button has been pressed: Sending email to [email protected].
19-OCT-06 16:42:23 GMT
New info : [email protected] : Bill,
No, I could not reproduce the problem with Active Users program.
Attaching OPP manager log in the next update. Bashobi
19-OCT-06 17:05:07 GMT
New info : [email protected] : Bill, Attaching internal log and manager
log
Bashobi
19-OCT-06 17:06:08 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\OPP_internal_log.tx
t
19-OCT-06 17:07:10 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\OPP_manager_log.txt
19-OCT-06 18:14:32 GMT
UPDATE
=======
Hi Bashobi,
Thank you for providing the requested information.
Best Regards,
Bill
STATUS
=======
@WIP -- Work In Progress
19-OCT-06 18:14:36 GMT
Email Update button has been pressed: Sending email to [email protected].
19-OCT-06 18:59:25 GMT
DATA COLLECTED
===============
SCREEN SHOTS
XML_Pub1.bmp:
Error:
Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob...........
LOG FILE
1. XMLPublisher_java.txt:
[10/18/06 11:16:57 AM] [5670:RT277479] Completed post-processing actions for request 277479.
[10/18/06 11:29:06 AM] [OPPServiceThread1] Post-processing request 277488.
[10/18/06 11:29:06 AM] [5670:RT277488] Executing post-processing actions for request 2
77488.
[10/18/06 11:29:06 AM] [5670:RT277488] Starting XML Publisher post-processing action.
[10/18/06 11:29:06 AM] [5670:RT277488]
Template code: XXBE_TEST_INV
Template app: AR
Language: en
Territory: US
Output type: null
[10/18/06 11:29:07 AM] [UNEXPECTED] [5670:RT277488] java.lang.reflect.InvocationTarg
etException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
10/18/06 11:29:07 AM] [5670:RT277488] Completed post-processing actions for reque
st 277488.
2. OPP_manager_log.txt:
[10/19/06 5:22:36 AM] [main] Starting GSF service with concurrent process id = 5688.
[10/19/06 5:22:36 AM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[10/19/06 5:22:37 AM] [Thread-12] Service thread starting up.
[10/19/06 5:22:37 AM] [Thread-13] Service thread starting up.
ISSUE VERIFICATION
=================
Issue veryfied by the screen shots: XML_Pub1.bmp which shows:
Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob...........
ACTION PLAN
============
Hi Bashobi,
1. Since you can not reproduce the issue from sysadmin responsibility can we say the issue specific to Receivables Manager
responsibility<INV xml report>?
2. You said before: "Concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.":
Is the above mean :
-The xml publisher report completed but you can not view the whole XML file
-Or the xml publisher report error out with "Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob.."
Thanks.
19-OCT-06 18:59:32 GMT
Email Update button has been pressed: Sending email to [email protected].
20-OCT-06 21:36:13 GMT
Email Update button has been pressed: Sending email to [email protected].
24-OCT-06 21:50:06 GMT
New info : [email protected] : Hi,
We are in the process of upgrading XML Publisher at the moment. I would like to
wait a day or two to test the report with the upgrade.
Thanks,Bashobi
26-OCT-06 20:15:07 GMT
New info : [email protected] : Hi,
Our DBA has applied the 5.6.2 patch on our dev instance. My concurrent process
runs to a warning.
The warnings in the OPP manager log file say
Template code: BE_RAXINV
Template app: XXBE
Language: en
Territory: US
Output type: PDF
[10/26/06 12:50:13 PM] [UNEXPECTED] [5849:RT281617]
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any idea?Hi All,
I have ran into the same issue.
"The Output Post-processor is running but has not picked up this request.
Any ideas.
Thanks
Ravi
Maybe you are looking for
-
The message says...iCloud backup, this iPad hasn't been backed up in 4 weeks. Backups happen when the iPad is plugged in, locked and connected to wifi. I don't know wether doing that will make the sign go away and allow me to use my iPad, but I don't
-
Keeps saying a problem occured when I want to convert my PDF to DOC
Keeps saying a problem occured when I want to convert my PDF to DOC
-
Create Fieldcatalog based on internal table (dynamic)
Hi , Is there a way to create Create Fieldcatalog based on internal table (dynamic). while creating fieldcat we usually many give the fields "fieldname" and "tabname". is there a way to get the fieldname from the main table ? Eg .. I have i_tab as th
-
how do you send a phone back
-
The situation: two users on the machine and both are logged in. When one opens iTunes (User A), the other user (User B) has an error message waiting on the desktop of 'cannot open iTunes because it is in use' AND iTunes is open. I've shut down autost