Actionscript Help Needed

So this is how it goes...I've already made my website, I have
all the pages and everything made BUT...I have a few bugs. The
first starts at my login page, it is a universal login, so it has 2
usernames and passwords, I have the code for it but, It does not go
when I press the submit button. The next is when I get to my actual
website, all the webpages but one are all in different scenes. I
type in the code: on (press) {gotoAndPlay ("1","Corp") ; } but it
just goes the scene up next. I have no clue what is wrong here. I
also have a flaw with my loading page, whether than just loads fast
or not, the loading movie does not loop until the movie is loaded.
This page is also part of the movie. Can anyone help? The web
address is:
http://www.freewebs.com/cliop/
The code I am using on the button in my intro is:
on (press) {
if (username == "Cliop" or username == "X844495") {
if (password == "*********" or password == "*********") {
if (username== "Cliop" & password== "*********" or
username== "X844495" & password== "*********") {
gotoAndPlay("1", "Main");

there's an actionscript forum for your issue. Better chance
of getting help there.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Cliop wrote:
> So this is how it goes...I've already made my website, I
have all the pages and
> everything made BUT...I have a few bugs. The first
starts at my login page, it
> is a universal login, so it has 2 usernames and
passwords, I have the code for
> it but, It does not go when I press the submit button.
The next is when I get
> to my actual website, all the webpages but one are all
in different scenes. I
> type in the code: on (press) {gotoAndPlay ("1","Corp") ;
} but it just goes the
> scene up next. I have no clue what is wrong here. I also
have a flaw with my
> loading page, whether than just loads fast or not, the
loading movie does not
> loop until the movie is loaded. This page is also part
of the movie. Can anyone
> help?
>

Similar Messages

Publishing/actionscript help needed

Okay, first time poster and this is a complete newb cry for help:
I had someone create a template site for me that is pretty simple - a single swf that pulls resources from a directory of xml files and assets. In theory, I should be able to update the xml for my site and provide new assets. Simple.
I'm not a total neophyte, i know some code and within the xml there are some <font> tags that over ride the swf's formatting or provide and href. Again simple.
My problem is that I now have to update our logo, which is hard coded into the source .fla file, which I know how to get in and swap out (the guy who did the work is not available). My problem is, when I publish, the new swf with the new logo does not want to read the <font> tags anymore. I have tried everything and I can't crack this. I've narrowed it down to two possibilities:
1. Something in the Publish settings, though I've tried every conceivable variation to no avail.
2. Something in the .as file that defines page template.
I know I need to provide more info but this is a start. I'm working on a Mac (as was the coder) and we were both using CS4.
Thanks for any and all help/direction.

If your in the .fla, and you are simply swapping one symbol in the manner that your speaking, I would probably do a couple things, first I would make sure that the logo your swapping is the same type of object/symbol, same size is good, and then I would backup a copy of the original, and then delete the logo symbol and bitmap, import and name the new logo image the exact same as the other, and then convert it to a symbol with the exact same name as original, then either drag it to the stage in the layer and position it should be with the exact same instance names.
I'm thinking in terms of a currently working product that I don't want to recode. So simply by taking a working one, and doing absolutely nothing more than changing the object, with everything identical, the code should do what it did before because all the actionscript instances, objects, var, event, and function names are identical, and therefore should use the proper instances at runtime.
I think.

Actionscript help needed for website

Hey everyone,
I am just beginning to learn the basics of creating web sites in flash. I posted this in site design a while ago, but no one has responded yet and I need help asap.
I have been following a tutorial and have it done pretty well, but they only cover one main button, and I am at the point where I need several more, but I am doing something wrong.
The tutorial is at this page: http://www.flash-game-design.com/flash-tutorials/advancedWebsite-flash-tutorial- 3.html
You can skip to the end and download the .fla if you want.
What I want to do specifically is to add probably 4 other main buttons that can also have drop down menus. Please be as specific as possible because the extent of my code knowledge isn't very far.
Thanks in advance
The code for the main page is as follows:
menu = ["About", "Bio", "Contact"];
this.createEmptyMovieClip("content", 1000);
this.attachMovie("sectionBackground","mask",1001);
mask._y = content._y=208;
mask._x = target=68;
content.setMask(mask);
content._x = -1000;
imageScrollSpeed = 5;
xStart = 125;
yStart = 51;
bWidth = 79;
bHeight = 17;
interval = 50;
countDown = menu.length;
menuOpen = false;
theTime = 0;
buttonScrollSpeed = 2;
for (var i = 0; i<menu.length; i++) {
var section = content.attachMovie("section_"+menu[i], "section_"+menu[i], i+100);
section._x = section._width*i;
var b = this.attachMovie("subButton", "subButton"+i, countDown);
countDown--;
b.stop();
b._x = xStart;
b._y = ySwtart;
b.interval = interval*i;
b.target = yStart+(bHeight*i);
b.txt = menu[i];
b.pos = target+(i*-section._width);
b.onPress = function() {
target = this.pos;
closeMenu();
this.gotoAndStop(1);
b.onRollOver = function() {
this.gotoAndStop(2);
b.onRollOut = function() {
this.gotoAndStop(1);
b._visible = false;
function closeMenu() {
for (var i = 0; i<menu.length; i++) {
var b = this["subButton"+i];
b._visible = false;
b._x = xStart;
b._y = yStart;
menuOpen = false;
mainButton.onPress = function() {
if (!menuOpen) {
theTime = getTimer();
menuOpen = true;
for (var i = 0; i<menu.length; i++) {
   _root.main["subButton"+i]._visible = true;
} else {
closeMenu();
mainButtoncopy.onPress = function() {
if (!menuOpen) {
theTime = getTimer();
menuOpen = true;
for (var i = 0; i<menu.length; i++) {
   _root.main["subButton"+i]._visible = true;
} else {
closeMenu();
function scrollButtons() {
if (menuOpen) {
for (var i = 0; i<menu.length; i++) {
   var b = this["subButton"+i];
   if ((theTime+b.interval)<getTimer()) {
    b._y += (b.target-b._y)/buttonScrollSpeed;
this.onEnterFrame = function() {
content._x += (target-content._x)/imageScrollSpeed;
scrollButtons();

That's all AS2 code, so you'll be beter off posting in the AS2 forum.

Website Actionscript Help Needed

So this is how it goes...I've already made my website, I have
all the pages and everything made BUT...I have a few bugs. The
first starts at my login page, it is a universal login, so it has 2
usernames and passwords, I have the code for it but, It does not go
when I press the submit button. The next is when I get to my actual
website, all the webpages are all in different scenes. I type in
the code: on (press) {gotoAndPlay ("1","Corp") ; } but it just goes
the scene up next. I have no clue what is wrong here. I also have a
flaw with my loading page, whether than just loads fast or not, the
loading movie does not loop until the movie is loaded. This page is
also part of the movie. Can anyone help? The web address is:
http://www.freewebs.com/cliop/
The code I am using on the button in my intro is:
on (press) {
if (username == "Cliop" or username == "X844495") {
if (password == "*********" or password == "*********") {
if (username== "Cliop" & password== "*********" or
username== "X844495" & password== "*********") {
gotoAndPlay("1", "Main");

I've tried a new code for my submit button:
on (press) {
if (username === "Cliop" or username === "X844495"); {
if (password === "moocowman" or password === "shadowman"); {
if (username === "Cliop" & password === "moocowman" or
username === "X844495" & password === "shadowman"); {
gotoAndPlay("1", "Main");
else on (press){
if (username !== "Cliop" or username !== "X844495"); {
if (password !== "moocowman" or password !== "shadowman"); {
if (username !== "Cliop" & password !== "moocowman" or
username !== "X844495" & password !== "shadowman"); {
stop();
I still have problems, I type in the right username &
password, yet I don't enter the website. It keeps giving me this:
**Error** Scene=Intro, layer=otherpages, frame=212:Line 11: 'else'
encountered without matching 'if'
else on (press){
Can anyone help me? I'm also still having problems with the
navigation.

OnRollOver actionscript help needed

Hi,
I want to insert an actionscript that when the user rolls
over an item, a movie clip shows up on screen at specific x and y
positions. I have only basic knowledge of flash actionscripting and
would appreciate any support. If someone could give me a basic
outline of the code, then I will probably be able to complete the
code myself.
Many Thanks
David Kelly.

try:

Actionscript Help Needed Here!!

Swuut up
My Event Listener wont work once the thumb_mc has loaded the
jpg... with this line commented out
//thumb_mc.loadMovie("images/dj1.jpg"); it works !!...but then all
im looking at is an empty movieClip that acknowledges when its
being clicked! great but it would be even better if i could get the
same result with an image loaded into the movieClip..mmMM.
The Code is attatched. If someone can help me out id really
appreciate it.
thanx

While I'm not going to post the working code for you, I can certainly point you in the right direction.
Take a look at the class java.util.GregorianCalendar. It contains methods (some located in Calendar) to do manipulations with dates. You should be able to use the API to figure out how to create two GregorianCalendar objects... one with the current date, one with the due date. Once you've got those, there are plenty of methods to retrieve the day of the week, the date in the month, etc. which will guide you to calculating your answer.
Excluding the weekends is going to be the trickier part, but then again, that's why it's your homework assignment. Try to get some code punched out, and if you have problems, come back here and post an exact problem, and someone will help out.

Actionscript help needed with getting Next Page to work

I just have a simple question (hopefully).
Question is:
I have a web page that displays a flash file that zooms and
pans, but I cant get the Next Page link to display. (will also want
1st, last and previous page)
1. Can the next page work and load the next or previous
numbered file?
2. Does it have to have all pages in one file, then it calls
the next frame?
Snippet below, or I can e-mail example files.
Please help, Thank you, Mike
============SNIPPET==========

<embed name="movie" type="application/x-shockwave-flash"
src="1.swf" width="300" height="500">
</embed>

<form name="f" onsubmit="return false;">
<button name="button" onclick="next()">Next
Page</button>
<button onclick="zoom()">Zoom In</button>
<button onclick="zoom2()">Zoom Out</button>
<button onclick="pan()">Pan</button>
<button onclick="setzoomrect()">Rect</button>
</form>
function next() {
var flash = window.movie || document.movie; // Get Flash
object.
flash.Zoom(50);

Use the same method you are currently using. The Zoom and Pan
methods just happen to be exposed to the ActiveX control and
Plug-in. So to use the the GotoFrame() method for example, just
change your code from:
function next() {
var flash = window.movie || document.movie; // Get Flash
object.
flash.nextpage();
To this:
function next() {
var flash = window.movie || document.movie; // Get Flash
object.
flash.GotoFrame(20); // This will jump to frame 19 of your
main timeline.
It goes to frame 19 because the method you are using is
zero-based. Meaning to get to the first frame of your movie you
would pass the number zero.
To use the TCallLabel() method it would look like this:
function next() {
var flash = window.movie || document.movie; // Get Flash
object.
// to target the main timeline, use
flash.TCallLabel("/", "labelName");
// to target a movieclip on the main timeline use:
flash.TCallLabel("/MovieClip", "lableName");
Also, just so you know. These methods are getting antiquated.
To keep up with the current versions and methods of communicating
between JS and Flash you should really look into the
ExternalInterface class in Flash 8.
Tim

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

Help needed I have a canon 40D. I am thinking of buying a canon 6D.But not sure that my len

Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
But not sure that my lenses will work.
I have a 170mm/ 500mm APO Sigma.
A 10/20 ex Sigma HSM IF.
And a 180 APO Sigma Macro or do I have to scrap them and buy others.
ALL Help will be greatly received. Yours BRODIE

In short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Help needed! Raid degraded again!

Hi!
Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
What am I doing wrong!
T: Ekku
K8N Neo4 Ultra
AMD 64 4200+
2 Gb RAM
2 x 250 Gb HDD (Maxtor)
nVidia RAID (in mb)
P.S. I wery SORRY with my poor language!

I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
LPB

HELP NEEDED WITH ADDAPTER-DVI TO VGA.

PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me.

Help needed for grouping.

Hi,
    Help needed .
I have an internal table having 6 .
Ex :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 10    10
a     aa    12    p1 20    20
b     aa    11    p2 30    30
b     aa    12    p2 40    30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 30    30.
b     aa    11    p2 70    60.
can anyone help me.How to do this..?
Thanks

Here you go
DATA:
BEGIN OF cur_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(2)     TYPE c,
    f6(2)     TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
    f1        TYPE c,
    f4(2)     TYPE c,
    f5        TYPE p,
    f6        TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(5)     TYPE c,
    f6(5)     TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
    MOVE-CORRESPONDING cur_tab TO sum_tab.
    COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
    READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                f4 = sum_tab-f4.
    IF sy-subrc NE 0.
      WRITE:/ 'Something went very wrong'.
      CONTINUE.
    ENDIF.
    MOVE-CORRESPONDING cur_tab TO final_tab.
    MOVE-CORRESPONDING sum_tab TO final_tab.
    APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
    WRITE:/1 final_tab-f1,
          AT 5 final_tab-f2,
          AT 10 final_tab-f3,
          AT 15 final_tab-f4,
          AT 20 final_tab-f5,
          AT 25 final_tab-f6.
ENDLOOP.
and the output
a   aa   11   p1     30   30
b   aa   11   p2     70   60

Help needed on installation of Oracle 9i on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed on installation of Oracle 9i EE on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Actionscript Help Needed

Similar Messages

Maybe you are looking for