Activate MTE for all the systems in tcode rz20

Hi!
I face with the following probem in tcode RZ20. If I choose the MTE set and one of the systems, I get
the warning for the MTE class Availability: <SID> on Server
Monitoring inactive Planned downtime
How to activate this MTE class for the system?
Thank you very much!
regards
Thom

Hi,
mark the node, switch on the maintenance-function, go to menue: edit -> nodes MTE -> choose activate.
I hope, this will solve your problem.
Greetings
Christian Wosgien

Similar Messages

Configuring EarlyWatchAlert for all the systems in the landscape

Gurus ,
In SDCCN can i configure EARLYWATCHALERT session with targethost as SDCC_OSS
now this has been only for production system . can this be done to all the systems in the landscape ?

Hi Susin,
As per me i could say the EWAlert only be configured for your production system rather
than the other systems(Dev/QA) existing in your ladscape.
If you are thinking to schedule this Alert for other products(BI/EP/XI) or for other SIDs,
then yes...please go ahead.
Why i am saying we can only schedule the EWAlert for production system, coz the
the EarlyWatch report uses the SDCC_OSS RFC, which is a copy of the SAPOSS connection. And the target destination refers to SAP's system where one copy of your
weekly shceduled EWAlert report goes to SAP end as well.
Please inform me incase any other queries...
Thank you,
Tilak

I purchased a student subscription to Creative Cloud. I got the confirming email. When I attempted to install the aps, kept getting a 30-day trial for all the aps. In the case of Photoshop, it was expired. How do I activate my Creative Cloud?

I purchased a student subscription to Creative Cloud. I got the confirming email. When I attempted to install the aps, kept getting a 30-day trial for all the aps. In the case of Photoshop, it was expired. How do I activate my Creative Cloud?

ChristinaW1111 for information on how to resolve the connection error preventing the active membership from authorizing then please see Sign in, activation, or connection errors | CS5.5 and later. If you have any questions regarding the steps listed within the document you are welcome to update this discussion.

HT201407 hi there my iphone 3gs is an openline but im using 02 sim card..when i am trying to update it on itunes it restore all the system..but when im trying to activate it..it dosent want to activate and my sim is no longer detecting on my phone..any id

hi there my iphone 3gs is an openline but im using 02 sim card..when i am trying to update it on itunes it restore all the system..but when im trying to activate it..it dosent want to activate and my sim is no longer detecting on my phone..any ideas on ho

I wa aware
I was rather hoping it might generate some info that might be of use to help OP it doesn't make much sense as it stands without a tedious Q&A session

In solution manager system not showing all the system in SLD

Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
Regards

Thanks for reply
it is not showing all the systems

Infotype screen headers needs to be changed for all the infotypes

Hi Guys,
This would be for a global implementation question.
For the US for a particular region, the screen header needs to be changed for all the infotypes.
The existing field (in the infotype header) is Employee Group which needs to be replaced with employment status.
The know how to change the headers but my question is STAT2 exists in IT 0000 but does not exist in 0001, 0002 0007.........etc
When i go to Table T588J to add an entry , Screen Header 42......,
I get an error " No Field STAT2 exists for infotype 0001"
No field STAT2 exists for infotype 0001.
Message no. PG811
Diagnosis
No STAT2 field exists for infotype 0001.
Procedure
Please contact your system administrator.
Procedure for System Administration
In Customizing, determine the incorrect entry in Personnel
Administration in the Header structure per infotype view, step " Determine infotype header and correct it
I would like to have some inputs from you guys ..... Any Suggessions...
Thanks,
Aastha

Hi Aastha,
Correct me if I am wrong.
First you need to maintain the header in T588J.
Screen header of an infotype is defined in view V_582A_B. We can define one screen header for employee and another for applicant in view V_T588I. The header modifier selected from view V_T588I has a definition in table T588J, which finally gets shown on the screen.
Depending on the transaction class (A = Personnel Administration, B = Recruitment) and the country grouping, a header modifier is assigned to the infotype header in the u201CHeader Modificationu201D view V_T588I.
For example like
Screen Header / Tr. Class / Header modifier
00 / A / 60
In the view u201CHeader Structure per Infotypeu201D (V_582A_B), a header has been assigned to every infotype. It also determines whether the data is valid from the system date or the start date of the infotype record
Hope this is useful.
Regards
RK

Resolve installed Flash player not excuted for all the Vista users on my PC?

I have a Windows Vista 32-bits system.
I have created 2 admin and 2 standard users.
Internet Explorer 9 (IE9) 32 bit is installed but also Chrome and Firfox are used.
For 1 admin user Flash works fine when accessing a site in IE9 that requires Flash.
For the other users, including the admin user, IE9 must be run "as adminstrator" by specifically choosing that option.
If not run "as administrator" IE9 states that Flash needs to be installed. That either leeds to Flash player not being installed (error is that it is already installed) or that after a succesful installation the problem simply occurs again (and again and again ...)
I want the standard users on the pc to be able to navigate to trusted sites without running IE9 in "as adminstrator" mode.
What do I need to do?
Can I set Adobe Flash player to be available for all the users for Vista and IE9?
Do I need to alter registry settings manually?
If yes - how and which?
Thanks in advance.

Chris,
Thanks for the reply but unfortunately it does not resolve the problem.
Other users (including the other system administrator) still need to run IE as administrator.
When in my sysadmin account the shortcuts for other users to a URL requiring Flash and using IE9 execute fine GRRRRRRR.
This is very frustrating.
On my pc Chrome aand Modzilla have no problems.
The childrens protective software I have however is based on IE.
Do you have any more suggestions?
My alternative is to downgrade IE9 to IE8 or 7 but that is also not an easy exercise ...
Thanks in advance for any input.

One PI set up for all the outbound interfaces

Hello Friends,
We have set of interfaces from SAP to 3rd party using PI system. We will not do any mapping for any interface in PI
We will receive the IDocs ( Orders , deliveries , shipping and alll ) from SAP and send it to 3rd party.
is there any way to send these IDoc's with only set up in PI ... only one repository and directory for all the messages )
Thanks

Hi
One way could be that on save of each transaction or event, an xml file is created which can be passed to the receiver.
Regards
Monika

Query level formula is not working for all the amounts

Hi Friends,
In my production system I found new thing that in my query level I done some calculation (as per my requirement I done amount devide by 100 to get correct values)
It is working for all the amounts except 1or 2 amounts, im uploading same source file for all the amountsu2026 why it is happening like this u2026and is there any availability to change those 1 or 2 values at data base tables level or at any pleace (I hope in SAP it is may not possible)u2026can any body tell me why it is happening like this. u2026 because of this issue only my report is pending to sign off u2026.please can any body find the solution ASAP.
Regards,
VENKAT

Are they non decimal currencies?
If yes, create RKF1 on amount field excluding the currencies for which you are not getting currect values then in CKF or formula as RKF1 / 100. Similarrly create another RKF2 on amount only including the currencies which are excluded in RKF1, create a CKF or formula as RKF2/10000. Then created another formula wich adding CKF1 and CKF2.

CsrAttachmentUploadDiv part attachment is not rendered SP 2013(Attach file in not working for all the list forms)?

csrAttachmentUploadDiv partattachment is not rendered SP 2013(Attach file in not working for all the list forms)?
Ravi
function ShowPartAttachment() {
ULSopi:
    if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
        alert(Strings.STS.L_FormMissingPart1_Text);
        return;
    (document.getElementById("part1")).style.display = "none";
    (document.getElementById("partAttachment")).style.display = "block"; //problem here

Am also facing the similar problem....any iputs are highly appriciated.
Issue..
1) Defined the attachment type in IMG.
2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
3) Attached the excel file in the design.
See the screen shot below:
The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
Please see the screen shot below:
Did i miss any Configuration?? Please suggest...
Regards,
Naveen

Report the date and time of all the systems reporting to sccm

Hi,
We have a requirement to report the date and time of all the systems reporting to SCCMnot sure if this is possible.
Appreciate any help regarding this.
Thanks

Not sure I understand what you are asking. Do you want to get the date/time for the last hardware inventory, heartbeat discovery etc?
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

Pulling the Header text for all the purchase orders

Hello,
Please help in resolving the below:
Is there any code in SAp to pull theHeader text for all the purchase orders in the data base,
Any tcode to pull the specific text automatically to pull the text from the requsition ( Plant wise in sourcing).
Thanks

STXH Text header
STXL Text detail
Chk the below message thread
Table to read PO Header text and item text
BR,
Krishna

Standard Program Name for updating the System-Variables everyday in BACKGRO

Hi All,
Can anybody tell me the Standard Program Name for updating the System-Variables everyday in BACKGROUND job?

Hello matt,
I have a program with variant.
This VARIANT input values will store in TVARVC table every day night background job.
i want the program name

I ERASEd WINDOWS. I want to re-install it and before, i'd'like to re-install all the system (10.6.7). But that seems to be impossible. When i try to turn on with the softare and pushing "c", blind screen. When i turn on it normaly, nothing happened. pls,

I ERASEd WINDOWS. I want to re-install it and before, i'd'like to re-install all the system (10.6.7). But that seems to be impossible. When i try to turn on with the softare and pushing "c", blind screen. When i turn on it normaly, and put the disc after, the process begins and stops 5 minutes after. The computer turns off. Has someone an idea to help me ? Thanks by advance.
Zach

Thank you for your answer.
And...Yes, i did : i inserted the install disc and started up holding the C key. Many time. But each time, the logo of install disc appeared during ten minutes and then, during the installation, he disappeared suddenly with no reason. And in the same time the computer turn off.
The beginning of the storry : my son made long time ago (a year) the partition between Mac and Windows. Everything was fine.
Recently, He decided to give more memory space to windows.
He could do that directly (perhaps, was there a way but he did'nt know it)
For this reason, he decided to desinstall Windows in a first step before reinstalling it.
But before doing this, he decided to re install all the system, like for cleaning his computer...and then, since, it's a big mess.
You know everythin now.
Could you help us ?
Thanks by advance.

Deployment Optimizer - Equal weightage for all the locations in the network

Hello All,
I am having difficulty in assigning equal weightage for all the locations in the deployment network. My scenario is as described below:
Deployment Source location: LOC1
Destination locations: LOC2, LOC3
I am running Heuristics to plan LOC2, LOC3 & LOC1, followed by
a Deployment Optimizer run at LOC1 to deploy to LOC2 & LOC3.
ATD quantity at LOC1 is always calculated after saftisfying the requirements at LOC1 and the remainder is deployed to LOC2 & LOC3 based on the cost settings. This seems to be the case even if I don't run the heuristics at LOC1 and start deployment optimizer after running the heuristics at LOC2 and LOC3.
The need at this client place is that all three locations are equally important even though LOC1 is the only deploying source location.
This applies for all demand categories i.e. Sales orders, Forecast and forecast at all the three locations.
I would appreciate if anybody has done this kind of configuration before and let me know how to model this.
Thanks,
Venkat

Have you follow all this checking ?
If you think that you already follow all the steps, but the value is not as per your config, you can raise ticket to SAP about it.
But I suggest you to double check your computation.
To determine a vendor's price level, the system compares the vendor's effective price with the market price for the material.
   1. The system first checks whether the buyer has maintained a market price for the material or the material group.
   2. If not, the system calculates the market price which is equal to the average of the effective prices for all vendors supplying this material. Prices from purchase orders and prices for subcontracting are dealt with separately.
   3. The system then applies the effective price for the vendor from the conditions.
   4. The vendor's effective price is then compared with the market price and the percentage variance determined.
   5. The system then assigns a score to the variance in accordance with the settings made in Customizing.
   6. This score is valid for the material, that is, at info record level. Since the score the vendor receives for a subcriterion is based not on an individual material, but on the total of all the materials he supplies, the following steps are necessary:
   7. The system repeats the comparison between effective price and market price for each of the vendor's materials.
   8. The system calculates an average from the sum of the scores determined. This average represents the vendor's score for the subcriterion Price Level.
Edited by: w1n on Apr 19, 2010 2:35 PM

Activate MTE for all the systems in tcode rz20

Similar Messages

Maybe you are looking for