Activating hyperlink in email creates two browswer windows

Starting today, whenever I click on a hyperlink that's in an email message, it opens up two browser windows instead of one.

That can be a problem with DDE.
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

Similar Messages

  • Clicking hyperlink in email opens two browser windows

    I'm running Snow Leopard 10.6.4 with Mail.app 4.3 and while in Mail.app, if I click on an email message that has a hyperlink, the default browser is launched but it displays two windows. One with the hyperlinked page and the other with the default home page. This only happens if the default browser is not already launched. If the default browser is already running, then only the hyperlinked page is displayed. Safari does not exhibit this behavior but FireFox and Chrome do.
    Is there a setting I can apply to have only the targeted page displayed if FF or Chrome is set as default when invoked from Mail.app?

    That can be a problem with DDE.
    *http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

  • AR Customer Setup: Communication Type Email Creates Two Email Entries

    Hi,
    AR Customer Setup: Communication Type Email Creates Two Email Entries, one with type as Email and other as E-mail.
    In AR Receivables > customer > entry > (B) account details > (T) communication or >Contact roles. While creating new customer contact communication type emai entry, upon entering email address, type as email and saving it, oracle defaultly creates another entry with same address and type as E-mail. So every time i create on email contact email address, it creates another similar with E-mail type.
    My question: Why does two entries get created and how can we avoid it.
    Thanks

    Hi and Welcome to the Forums!
    To use the proprietary RIM Push email capability, you must have an adequate data plan from your carrier. The carriers host BIS for their BB users. Typically, BIS is not available via generic data plans. Many carriers call what is necessary The Blackberry Data Plan. Whatever they call it, it is the carrier who delivers BIS to their BB users -- contact them for assistance. Once you have a BIS-capable data plan on your BB (at whatever fees your carrier will charge, btw), you will then have Personal Email added to the email setup wizard.
    Further, since this is a second hand device, you should read this and ensure that the prior owner fully conducted all steps in the Seller section...if not, then your carrier will never be able to register a BIS account to the BB.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to Print text in two main windows

    For printing label have created two main windows on a page. calling function write_form In ABAP Program under do loop for two times. 
    but program prints only one window. why is it so? how can i print text on two windows.
    do 2 times.
      COUNT = COUNT + 1.
    loop at itab WHERE DEPTT LT 200.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            ELEMENT  = 'TEST'
            FUNCTION = 'SET'
            TYPE     = 'BODY'
          WINDOW   = 'MAIN'
          EXCEPTIONS
           ELEMENT   = 1
           FUNCTION  = 2
           TYPE      = 3
           UNOPENED  = 4
           UNSTARTED = 5
           WINDOW    = 6
           OTHERS    = 7.
      endloop.
    enddo.
    Please guide.

    Since the information is variable and coming out of the print program, I can assume you want to print many labels but two to a page. Also, any page numbering, etc will need to be updated. This is easily accomplished with SAPScript but a feature people rarely use I believe. Here are the simple steps:
    1) On the Windows Screen: Creat a main window for the size of the label, etc knowing that you will be putting multiple windows on a page. For example, if page size is 8.5 x 11, maybe your window size is 6 X 4 or something similar. You only need one main window defined.
    2) Now go to Page Windows Screen. Add a window MAIN and down at the bottom where it says Window Type put in MAIN. Next to this field is a little field about two characters long. In here put in '01'.
    3) Now Add another window MAIN and down at the bottom put in '02'.
    Hopefully this gives you the idea. I've done this with up to 30 small windows in order to print variable window for labels on label stock such as Avery 8167, etc. 
    Good Luck!
    Tim Stadler
    Menasha Corporation

  • Having two main windows on left hand side and Right hand side of the form

    Hi
    I have a requirement in SMARTFORM  where the required output will be a single form design, approximately A3 in size, split by invoice details on the left side and delivery details on the right side. 
      As the Invoice details and the deilvery details will have multiple line items
    I am planning to create two MAIN window one for the Invoice on the Left hand side and the other for the  delivery on the Right hand side of the form.,
    Will this work or is there any other solution to do the same .
    Regards
    Senthil

    No, it's not possible to have 2 main windows. It will let you activate the form but will run into dump.
    If invoice details on left and delivery details on right are one on one then you can create one table with separate columns for each having all the details in one internal table. If not there could be other work arounds depending on your requirement.

  • In the "View"-- "Page Source" window: why can't I select a portion of a URL like I used to in previous versions? If I try, the source text behaves as an active hyperlink instead. This makes copying and editing HTML a pain!

    In want to copy a portion of a URL from the "View" --> "Page Source" window and paste it in my favorite text editor. This used to be a simple action with my mouse (mark portion with left mouse button, dump copy into editor window with middle mouse button). In Firefox 3.6.9, it is not plain text in the "Page Source" window but active hyperlinks (cursor shape changes) and takes me to the website of that URL, which I don't want. How can I get the original behavior (plain text page source) back?

    The code taht you have shown is not the template, it is a document that has been created from a template and renamed with a dwt extension.
    If you load the document into DW then go to menu item Modify->Templates->Detach from Template and save the file, you will have your original template called index.dwt and located in the Templates subdirectory.

  • How do I create two iTunes accounts under the same email address?

    I've got my account duplicated -and charged for apps I already own- by using my email address as login instead of apple ID, but I've been told it's my fault so…
    I'm trying to figure out
    *How do I do to create two iTunes accounts under the same email and having different IDs?*
    I mean, two accounts with different purchase history. It doesn't matter if billing address, or credit card are the same (or different) because none of them flag apps as "purchased"
    I tried today from iTunes, but it tells me the email is taken.
    Do you know any way a user can do it from our end? (website, iTunes, iPhone)
    If you've got charged by apps twice, please don't say it here. I don't want my post being deleted again. Thanks.

    Beavis2084:
    Expired .mac accounts HAVE NO EMAIL. You own the id (which iTunes requests to be spelled in form of an email)
    Also, FREE .mac accounts have no email either.
    What you see in the screenshots is what I'm saying:
    There's been a change in the way iTunes wants you to login. The iTunes reps see at their end what you see at the top of the window, which probably is the "migration" of the new login: Old login system, using ID (in form of email for iTunes)
    BELOW you clearly see where says "ID" and both have the email as login.
    (again, that .mac email doesn't exist and NEVER DID)
    That's the NEW login: your EMAIL.
    I'm sorry I didn't explain it better the first time. I wrote about this so many times to iTunes support reps to prevent them to "read" what their system says that I gave it for settled. (not to mention that my first post was removed because "it lacks of interest for others"
    I own an apple ID, given away with the purchase of a new computer (nothing small by the way) and when that happens (and never subscribe for a paid membership), you use ANOTHER email to be related to your account.
    Now that AGAIN apple asks you for using your EMAIL (non-apple in our case) instead of your ID (which you can't use or you will never get a notification again!) the system believes there are two accounts.
    It's like your credit card bank changing the address for sending the payments. You are STILL paying, but getting a higher rate because their CHANGED the address and the check never arrives.
    In this case, signing in with a different string, makes the system believe there are two accounts. And that probably is under the policy which probably states purchases are not charged twice for SAME ID, and SAME iPhone… and you used a different ID, so it must be fair (sarcasm). Who told you to do so? Bad boy!

  • How do you create two apple ids for one email address.

    I bought two i pads for my kids. Since we have just one email address, everytime I try to create a new apple id it says I already have one. They need separate ids so their friends can facetime with one and not the other. Can't figure out how to create two apple ids with one email address.

    Donnathemom wrote:
    Well any ideas on how to solve this problem? When my daughter does facetime with someone it says she's Wyatt. She's not real happy about that. 
    Get her an email address, even if she never uses it.  They're free and available almost everywhere.  The only requirement is that the address be a valid one.
    Edit...
    You can even use an "alias" of yours.  That's a fake address that actually sends everything to you.  Check with your current email supplier.

  • When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

    When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

    Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
    You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
    // Get the icon from the b3 button
    var oIcon = getField("b3").buttonGetIcon();
    // Get  reference to the b0 button
    var f = getField("b0");
    // Set the icon of the b0 button to the icon retrieved from the hidden button
    f.buttonSetIcon(oIcon);
    // Show the b0 button
    f.display = display.visible;
    This code would go in the Mouse Up event of the smaller button.

  • Why can't I create a response to an email from the Viewer window?

    Why can't I create a response to an email from the Viewer window?
    When I select an email to respond to in the viewer window and click on the respond arrow that appears just under the header, a new response email opens for a split second then disappears.
    I have to actually click on and open the email message in its own screen to be able to then click on the respond arrow and succeed in having Mail open a response email that I can edit - one that remains open.
    This seems to be a bug that we need to have squashed.
    Steve

    Do I have to connect the iPad to a computer to make this work? Is the fact that I used another email address to set up my Apple ID years ago causing the problem? A friend of mine just got a new iPod and he was able to set up a me.com account. I am feeling rather stupid. Hope someone here can help.

  • How to create activity template for email campaign in CRM 5.0

    Hi,
    I tried attaching only a simple activity transaction type (Z005) to communication type email in SPRO > CRM > Marketing > Marketing Planning and Campaign Management > Campaign Execution > Define communication medium.
    After doing this, I was expecting that when I execute my campaign for channel email, emails will be sent to the customers and activity transactions of type Z005 will be created for each outbound email.
    Activity transactions are created, but I think I would like to maintain more details (description, responsible org etc.), which should be possible using activity template.
    I am struggling with creating activity template. I created a normal transaction of type Z005 and tried to maintain it as a template (which was obviously wrong), and the system gave me a message that I need to attach a template transaction of template type D.
    How do I create an activity template of type D?
    Any help would be appreciated.
    Regards,
    Kaushal

    Hi Kushal,
    As your are in CRM 5.0 you can create Activity template from SAP GUI. Just execute CRMD_ORDER and select your Activity type (ZOO5) and in Menu click on Extras->Template->Create  just enter required details such as (description, responsible org etc.)  save the template it will create Activity template number. While creating Email Campaign just enter activity template number.
    Execute Email Campaign it should create Activity with required details.
    Regards,
    Dipesh.

  • Pick activity is not working properly while creating two or more file adapt

    Hi,
    pick activity is not working properly while creating two or more file adapter for bpel process.
    bpel process compiled and deployed succesfully but while observing the wsdl file of deployed process you can find only one file adapter. so it polls only from that location.
    can anybody help on over this? or it's limitation of jdev to use only one file adapter at time while using Pick.
    Thanks
    sagar

    Does anybody tried this?
    Thanks
    sagar

  • Windows 7 and Microsoft Office installed a series of updates and now I cannot open hyperlinks in emails.

    After my system rebooted and I opened my emails in outlook, when I clicked on a hyperlink, it brought me no where. I did not get an error message. I went back in and set Firefox to my default program with all extensions and protocols for Firefox. However, when I click a hyperlink in an email, it still does not open in Firefox. What little trick has IE and Microsoft done now to change my system. Until I updated some files today, hyperlinks in emails opened in Firefox. Please Help. I hate IE!

    Windows does not know that it should start Firefox to open those links.
    Try this first. Start IE (yes I know) and set it as the default browser. After
    close IE. Wait a few moments, then start Firefox. Then set FF as your default.

  • We have created two partitions in removable drive(USB). One of the partition is active and the other is hidden. We are trying to acess the hidden partition in Win PE 3.0 environment using WMI

    We have created two partitions in removable drive(USB). One of the partition is active and the other is hidden. We are trying to access the hidden partition in Win PE 3.0 environment using WMI. VBScript code snippet used to detect the partitions is given
    below:- 
    SetobjWMIService = GetObject("winmgmts:"_&
    "{impersonationLevel=impersonate}!\\"&
    strComputer & "\root\cimv2")
    SetcolDisks = objWMIService.ExecQuery
    Select * from Win32_LogicalDisk")
    It will return the partition which is active but fails to list the partition which is hidden. The same piece of code was supported on WinPE 2.0

    I am giving the complete code, may be you are able to understand better. We are using Win32_LogicalDisk to retrieves the complete information of all the drives (like C:, D:) including removable drives. 
    Function
    LocalDriveFound()
        strComputer =
    SetobjWMIService = GetObject("winmgmts:"_
    "{impersonationLevel=impersonate}!\\"&
    strComputer & "\root\cimv2")
    SetcolDisks = objWMIService.ExecQuery
    "Select * from Win32_LogicalDisk")
    ForEachDiskDrive
    IncolDisks
            DriveLetter = Left(DiskDrive.Name,1)
            DriveType = DiskDrive.DriveType
            VolumeName = DiskDrive.VolumeName
            WScript.echo Driveletter &
    "|"& Drivetype &
    "|"&VolumeName
    SelectCaseDriveType
    Case2 ,3  
    'Fixed or removable
    If(VolumeName=USBVolumeName)
    Then
    If(DriveLetter<>
    "Z")
    Then
                        ChangeDriveLetterWithMountvol DriveLetter,
    "Z"
    EndIf
                    bIsLocal=
    True
    EndIf 
    If(VolumeName=USBRootName)
    Then
    If(DriveLetter<>
    "Y")
    Then
                        ChangeDriveLetterWithMountvol DriveLetter,
    "Y"
    EndIf
                    bIsLocal=
    True
    EndIf 
    CaseElse
    EndSelect
    Next
    SetDrives =
    Nothing
    SetFileSystemObject =
    Nothing
    End
    Function

  • We have three Apple devices. They are all have the same name and are on the same apple ID. We would like to back up our Notes to the cloud. If we each create our own Apple email address will they create two separate Notes flies on the cloud or merge?

    We have three Apple devices 2 IPhone 4's and one Ipad2. Only the Ipad2 is running the latest OS. They are all have the same name and are on the same apple ID. We would like to back up our Notes to the cloud. If we each create our own Apple email address (we don't have one yet) will they create two separate Notes flies on the Cloud or merge them?

    Welcome to the Apple Community.
    Separate Apple ID's will result in separate notes. However when you first start with separate ID's unless one of you erases the notes you have, you will both start off with the same set of notes, but from then onwards each set won't sync with each other.

Maybe you are looking for