Active Sync running when a change occurs on the target resource

Does anyone have any insight on if I can configure an Active Sync to run when a target resource attribute changes? In the docs I only see manual running and scheduled running.
Thanks
Edited by: robspierre19 on Jan 25, 2008 12:35 PM

Hello.
Keep in mind that Sun IdM connects to resources via agent-less, over-the-wires connection. As such, there's no agent or software running on the managed system to "alert" IdM that a native change was made (e.g. a target resource attribute change).
ActiveSync is in most cases a form of polling -- it periodically checks for native changes. How it checks depends on the resource. In some cases, it checks change logs (LDAP), in some cases it checks a last-modified flag (e.g. DB table), in some cases it looks for an HRMD_A message (SAP HR), etc.
The Manual and Scheduled (Automatic) is how you want the ActiveSync process to start -- e.g. automatically start when IdM starts (Application Server is booted) or start only when you manually select it to start. The polling frequency is configurable for every ActiveSync adapter in the ActiveSync Wizard (Resources tab).
Does that make more sense?

Similar Messages

HT201210 What to do when an error occurs after the restoring process? my phone wont turn on anymore

What to do when an error occurs after the restoring process? my phone wont turn on anymore

The phone is telling you to plug in your phone to your computer. Do that then let it sit for a few minutes and then try it again and make sure itunes is open when you do

The Method to reflect the changed OIM User Prifile to the Target Resource

After completing the Trusted Reconciliation,
The Method to reflect the changed OIM User Prifile to the Target Resource Account
question)
1. If i execute the Reconciliation of the target system, the current OIM User Profile information is automatically reflected in the target system

Don't create threads for the same question:
errorlog : Empty parent row cannot be updated ... what????

Report Still Runs When Validation Errors Occur

Hello.
I'm using Apex 4.2.1 against Oracle 11gR2 and Oracle App Server (mod_plsql).
My Set-Up:
I created an application containing a "classical" type report that is driven by a WHERE clause. I also have two date fields in an HTML region on this same page. These fields are used in the report WHERE clause. And the report is run by clicking a GO button on the page.
Here's what the WHERE clause looks like:
where table_date >= to_date(nvl(:P1_BEGIN_DATE, '01-jan-1900'), 'dd-mon-yyyy') and table_date <= to_date(nvl(:P1_END_DATE, '31-dec-2300'), 'dd-mon-yyyy')This is designed so that, if any of the date fields are NULL, then the minimum or maximum date will be used for the query.
These date fields should always have a value when the report is run, and so, I created two after submit NOT NULL validations, one for each of the date fields. If any of these fields is NULL when the GO button is clicked, an error message appears in the notification area at the top of the page.
Looking at all this, you might realize (as I do) that the nvl() functions in the above WHERE clause are redundant. After all, the validations are supposed to prevent these date fields from becoming NULL when the report is run. In any case, this set-up does work ok and points out a strange behavior with Apex.
My Problem:
If any of these validations throws an error message, the report still runs. In previous versions of Apex, if a validation (or, for that matter, any error) is thrown, the report remains static. The report region does not disappear and the report is not invoked until the user corrects the error.
If both date fields are filled, I click the GO button and the report correctly returns, say, 100 rows. But when I empty both of the date fields and click GO, the validation errors appear and the report still runs, now returning the maximum number of rows, say, 1000.
What I've Tried:
I added a Branch-to-Page with condition "No Inline Validation Errors Displayed" so that the page branches back to itself only when no errors appear inline and I changed the validation error messages to appear inline. This has no effect.
And if I remove the nvl() functions from the above WHERE clause, then, when validation errors are thrown, the report data is replaced with the "No data found" message. All very disconcerting to my users.
Does anyone know why Apex reports are still run in presence of validation errors?
And how do I get around this behavior?
Thank you for any help.
Elie

Hi, Scott.
Thank you for your help/suggestions.
I like your first suggestion: creating a DA on the GO button that causes my report region to refresh only if both begin and end date fields are populated. And so, I tried doing this.
My DA looks like:
Event: Click
Type: Button
Button Name: P1_GO
Condition: - No Condition -
Action: Refresh
Fire When Event Result Is: True
Fire On Page Load: Checked
Selection Type: Region
Region Name: People Count
Event Scope: Static
Condition Type: PL/SQL Function Body Returning A Boolean
My PLSQL Code in Expression 1:
IF ( (:P1_BEGIN_DATE IS NOT NULL) AND (:P1_END_DATE IS NOT NULL) ) THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;My P1_GO button was automatically changed to "Controlled by Dynamic Action". And "Execute Validations" for this button is set to "Yes".
Unfortunately, this DA does not work. When both date fields are filled, clicking the GO button does not cause the report (nor anything else) to refresh. However, if I navigate to another application tab and then return back to my report page, I notice that the report does refresh at that point. But clicking the GO button has no effect.
And when either or both of the date fields is NULLed, clicking the GO button does not cause my validation error messages to appear.
By the way, I do agree with your comment about the NVL() functions. As I had mentioned in my original post, I also realize that, with my WHERE clause, checking for NULLs in my date fields is not needed. Still, if users fail to fill these date fields, then it would be useful to remind users that these fields should be populated. This is why having the validation checks are still needed despite my WHERE clause.
In any case, would you know what I am doing wrong here with this Dynamic Action?
Also, with respect to my first question, why is Apex causing my report to refresh when validaion errors have occurred? This did not occur prior to version 4.2.
Thank you very much for any further help/advice.
Elie

Create a delay when a change occurs

Hallo ,
I would like to know how a delay can be created when i change the value of a pre defined control . The range control is a prefedined option that allows me to change the sensitivity . since it takes few seconds for the new sensitivity to be set i would like to create a delay when this value is changed . Kindly help me on this .
thanks and best regards,
Attachments:
delay.png ‏23 KB

Thanks a lot for your reply .I have implemented what you said. Unfortunately my hardware is facing some issues and i cannot test it right now.
Hope it works .
Thanks once again .
Best regards
Attachments:
delay2.png ‏22 KB

How do I know if my iphone has successfully been backed up to my iTunes? I plugged it in and it said it backed up and I did a sync, but when I am looking through the summary page and I am not sure that all of my data got backed up. Please help!!

I have never backed up my iphone to my itunes because I always used the cloud. However, a few months ago, my wifi disk in my phone burned out so the Apple Store told me to back up everything to my itunes. I am going today to get the iphone 6 so I connected my phone (iphone 4S) to my itunes and I backed up and synced. However, when I look throughout the summary page and click in different areas (Photos, Movies), I don't see any of my data -- it is still asking me to Sync from iPhoto or to sync from another location. By backing up & syncing my phone, did all of my data get saved? Or do I still need to do more steps?
Sorry for the long winded question, I am just so nervous to get a new phone and plug it in to be restored and not have any of my pictures, videos or contacts, etc. Any help would be so so appreciated!

Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

How do I keep BI Publisher running when I log out of the console in linux?

I am using the standalone version of BI Publisher and I want to keep it running even after I log out of the console. I have a script that starts it so I typed 'nohup start_bipub.sh &' but when I log out it shuts down anyway. I started my apache server the same way and it still runs after I log out so the only thing I can think of is that X is being killed due to the logout and BI Pub needs it. Is there anyway to keep this process running?
Thanks,
Denise

It depends on the data path from the tower you're using, through NATs and many routers, all the way back to the server. Which depends on your current location and sheer luck.
For some users, the data path stays alive for 30-45 minutes at a time... thus the phone only has to ping the server that often for push to work. Their push doesn't use much battery.
Other users have the misfortune of being connected via pathways that only keep a connection alive for 5-10 minutes. Their iPhones eat battery like crazy, and they usually end up switching to a 15-30 minute timed fetch instead.

Why does compiled (EXE) VI run when you double-click the icon even though I un-checked "Run When Opened"?

My VI code uses the VI's that came with the NI USB-8451 USB-to-SPI converter. Before compiling I needed to use one of those VI's to select the particular USB device that I'm trying to address, then I click the Run button. But after I compile my code into an EXE file, and then double-click the executable file it immediately starts running without allowing me to select the USB device - even though I un-checked the "Run When Opened" box. In fact I also un-checked the Show Menu Bar and Show Scroll Bars boxes as well, yet it shows both of them. What am I doing wrong?

It seems silly to start and stop a built LabVIEW application from the toolbar. A complete application should always run and have the LabVIEW toolbar hidden. A user of you code is not supposed to be familiar with LabVIEW mechanics.
You should do all this in code. Really!
Do a nice state machine with at least two states. (1) a state for where the device has not been entered and is simply waiting for your input, and (2) another state that verifies your device input and hands it to the rest of the code for afterwards.
Still, what LabVIEW version do you have. Did you set the "run when openend" setting in the application builder for the desired VI or just in the VI itself?
LabVIEW Champion . Do more with less code and in less time .

How to hide save changes alert window when no changes made to the form

hi,
in my form when i close the form without making any changes it displays do you want to save the changes alert.how to hide this alert when no changes are made to the form window.
regards
Yesukannan

Be advised that this solution will also exit the form without saving the changes and asking anything if the user did make changes.
You're probably changing some field from a PL/SQL trigger (hint: post-query or when-new-record-instance are likely). If you set the value of a field from a trigger or program unit that also marks the record as changed for Forms. Forms will then ask to save the changes when exiting the form.
If you want to prevent this, reset the record status after you change the field in the PL/SQL code.

Running more than one batch on the same resource at the same time.

Dear all,
as i'm working in paper industry , i have to release more than one batch at the same time using batchable resource , but i have problem in declaring the resource usage , if i run 3 batches on the same resource for i hour , what is the resource usage for each batch and how the system will help me to know that.
Regards.

Hi
My question is If I run 3 batches on the same resoures......what do you mean
Assume you have 3 batches names b001/boo2/boo3
for B001 you have planned resoues as 1, but Actual resouce count is 2
for B002 you have planned resourse as 3 but Actual resource count is 3
for B003 you have planned resourse as 2 but actual resouree count is 2
Here the the Acutal resource usage will calculate as per the actual count and that too within Batch only. And it will not consolidte Batches altogehter.
Rgds
Raj

What does "An error has occurred. The target schema is in an unknown state." mean?

I guess it means there's some kind of error in the target schema that's preventing the update from happening.
I'm comparing a local 2014 database with the database project. From the database, to the project.
Unfortunately, it gives no indication as to the kind of problem it's encountered, nor where the problem is.
Also when I try searching for this message both on google in general and on this forum I can't find a single page mentioning this error text.
Can anyone help me understand this issue and ideally debug and fix it?

For now I have deleted all the sql files, and the cache file (dbmdl) from the project and updated the project from a fresh start.
This allows me to continue working, but it's an unsatisfying resolution.

Bug? - PSP LED Moves on FP when Binding Change Occurs

[LabVIEW 2010]
When I update the binding on the control the PSP LED moves. This is annoying
Cheers
-JG
Unable to display content. Adobe Flash is required.
Certified LabVIEW Architect * LabVIEW Champion

This was reported to R&D (CAR ID # 296216) for further investigation. I did try saving the VI before the variable to which the control was bound was changed, but the same behavior occurred.
Thanks for the feedback!
-Sean N
Applications Engineering Specialist - Semiconductor Test
National Instruments

Exchange 2013 CU2 - Mailbox Databases and Active Sync - update when new item arrive

Hi,
Maybe it will be a silly question but I don't know what exactly is going on. We are running Ex2013CU2 Evironment (1 CAS, 2 MBX Servers with 4 Mailbox Databases).
User mailboxes are in MDB01 and they are allowed to connect to mail via activesync and everything is working great (I mean that auto notification on mobile when item arrive is working).
When we move user mailbox to another database ex. MDB02 -> "auto notification when item arrive" does not working, but manual synchronization is working great.
Does anyone have any idea why it is behaving like this or what should I check to fix this ?
Thanks.
-- Kamil Tatar

are you saying PUSHMAIL is not working after moving the mailbox to a different database?
Where Technology Meets Talent

ICal change hours when sync, iCal is systematically changing hours in the calender when synced with iPad. How avoid this?

iCal is alteing the time of events in teh calender when synced with iPad. Events are moved. All times are set at the same time on iPad, Iphone and Macbook pro, but the calendars are altered on all devices when synced. How can I avoid this?
Pat V

Hi,
What timezone is your iCal set to (this may be different from your computer timezone look at the top right of the iCal window)?
What is the timezone on your iPad under Settings > Mail, Contacts, Calendars > Calendars > Time Zone Support ?
Best wishes
John M

Exchange Active Sync only when at Work?

I can only access exchange (activesync) when I'm at work --- and work prevents me from doing POP. On the other hand, when at home I cannot access exchange but I can access POP.
The iPod touch seems to get unhappy when I'm at home and exchange cannot be accessed. I'd like a way to associate certain email accounts with certain WiFi SSIDs --- or some other automatic method to active email accounts.
Any solutions out there?
Thanks!
... Altan

I would ask the IT department if Outlook Web Access and ActiveSync is available from the internet and if it is, what the public DNS name of the server is.
If you don't want to check with your IT department then I would check the server you defined. If you set it up at work, you may have set it up with the internal dns entry for the server (mailserver.domain.local). The public dns entry maybe something like mail.yourorg.com. Also, you may want to check to see if SSL is enabled or if disabling it will help you connect.
If you don't know the server name, you can use nslookup to try and find out. Directions are listed below.
1. http://www.zoneedit.com/lookup.html
2. enter your domain name this is usually the part after the @ in your email address
3. Select Mail Server(MX)
4. Click look it up.
5. Try the server name with the lowest value.

Active Sync running when a change occurs on the target resource

Similar Messages

Maybe you are looking for