The Method to reflect the changed OIM User Prifile to the Target Resource

After completing the Trusted Reconciliation,
The Method to reflect the changed OIM User Prifile to the Target Resource Account
question)
1. If i execute the Reconciliation of the target system, the current OIM User Profile information is automatically reflected in the target system

Don't create threads for the same question:
errorlog : Empty parent row cannot be updated ... what????

Similar Messages

After joining computer to the windows doamin i cannot change password for Mac for the domain user

After joining computer to the windows doamin i cannot change password for Mac for the domain user

Hi,
Did this problem occures after installed Windows 8.1 Update 1? Here is another thread that had similar problem. Also I don't think this problem relate with Domain. Please refer to the solution of the thread below for reference, If there is any
progress, please let us know.
http://social.technet.microsoft.com/Forums/en-US/08993680-b6f5-4e80-b031-d32fec97d682/not-able-to-right-click-on-tiles-after-81-update?forum=w8itproge
Roger Lu
TechNet Community Support

Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?

Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?

I have this issue. Album artwork was totally fine before. After this update, it is all messed up and even got messed up when transferred to my iphone.
iTunes doesn't have the artwork anymore, but then iPhone has it but shows wrong artwork with wrong albums.
Please fix!

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content?

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
Cheers.

You canot easily change your country settings. The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store. You are also restricted to waiting 90 days between country changes.
E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE

How to get the list of roles assigned to a user in all the child systems

how to get the list of roles assigned to a user in all the child systems from CUA SYSTEM

Try transaction SUIM in your CUA system. Go to user, cross-system information, users by roles. If you run it wide open, you'll get all users and all roles assigned for all systems managed in your CUA.
Krysta

TS4009 Why am I receiving emails saying that I have exceeded my iCloud storage, when the methods above show that I am using 4Gb of the 50Gb I have paid for?

Why am I receiving emails saying that I have exceeded my iCloud storage, when the methods above show that I am using <4Gb of the 50Gb I have paid for?

The problem could be that you don't have enough storage on the device itself, not on iCloud. Go to Settings>General>Usage to see how much "Storage" you have available. Farther down the list is the available storage on iCloud.
Also check:
Go to Settings>iCloud>Storage & Backups>Manage Storage; there, tap the device you need info on and the resulting screen lists Backup Options with which apps store data on iCloud.
A device needs many MB of storage in order to perform a backup to iCloud.
Also see: http://support.apple.com/kb/ht4847

Any method not allow to change PO price after do the GR

hi,
Any method not allow to change PO price after GR had done. Thanks

Hi jo jo,
To disallow any price changes, set the Tolerance Key limits for Price Variance (PE-Price Var in Purchasing) for PO in IMG to Zero. This will compare the new price (Effective Price w/ Cash Disc) to the material price in the Material Master. Also set the msg no. 207 (in App Area 06) as a "E"-error message. This will stop end users from making changes.
If the Tolerance limits are set to zero and the message 207 is set as E, it should work.
Let me know if this was helpful.

Changing Portal Role after the status change of user status at the CRM end.

Hi,
I have Portal with Java database as the default and CRM is connected to it using SSO.The database in both the case in separate.The users that are created in Portal will have a BP status in CRM sytsem.
Now my requirement is that if the status of the BP gets changed at the backend simultaneoulsy its Portal role should also gets changed.How shall i facilitate this procedure of changing the Portal Role?
Is there any RFC ,BAPi or Webservices required for this?
Regards,
Amarys
Edited by: amarys on Sep 13, 2011 11:20 AM

Hello,
Since the status has no number it will appear under statuses W/O number bottom right in status overview window.
These status will appear as additional text beside current user status. For example if user staus is BUG and status without number is DFL and sets when deletion flag is set and gets deleted when it is revoked than user status will appear as
BUG DFL -
Deletion flag set.
BUG -
When deletion flag revoked.
You have to live with it. I don't think there is a way out for that.
Thanks
Saikishore Ganga.

Can't change "(unknown)" user - who owns the directory

I have a directory I created long ago probably in Panther, and with a different UserID. The directory is now Read Only for all except Owner.
Finder now shows the owner as "unknown" and won't allow me to change it, even though I am administrator.
In Terminal, the user shows as "501" - my userid is "frank" and the UID is "502". Even when I am logged in as Root, I can't use the chmod or chown commands. Any way to get around this?
ls -l
total 328
-rw-rw-r-- 1 frank admin 15364 Aug 16 21:44 .DS_Store
drwxrwxr-x 9 frank admin 306 Mar 8 00:52 .Spotlight-V100
drwxrwxr-x 5 frank admin 170 Apr 4 2006 .TemporaryItems
drwxrwxr-x 4 frank admin 136 Aug 16 21:56 .Trashes
-rw-rw-r-- 1 frank admin 29184 Dec 2 2006 Desktop DB
-rw-rw-r-- 1 frank admin 117714 Oct 18 2006 Desktop DF
drwxrwxr-x 2 frank admin 68 Nov 27 2005 Desktop Folder
drwxr-xr-x 14 501 admin 476 Aug 23 2005 My Software Testing
drwxrwxr-x 4 501 admin 136 Aug 9 2007 Network Trash Folder
drwxrwxr-x 2 501 admin 68 Nov 22 2005 TheFindByContentFolder
drwxrwxr-x 2 501 admin 68 Nov 22 2005 TheVolumeSettingsFolder
MyMacMini:/Volumes/Users root# chown frank "My Software Testing"
chown: My Software Testing: Operation not permitted
MyMacMini:/Volumes/Users root# chmod 777 "My Software Testing"
chmod: My Software Testing: Operation not permitted
Is there any way to create a new user with a uid of 501? I tried NetInfo and didn't see any way to do it.
Any help appreciated.

MyMacMini:/Volumes/Users root# chown frank "My Software Testing"
chown: My Software Testing: Operation not permitted
Are you in the correct directory here? Notice that you're in users.
I have a directory I created long ago probably in Panther, and with a different UserID. The directory is now Read Only for all except Owner.
Finder now shows the owner as "unknown" and won't allow me to change it, even though I am administrator.
How is the drive formated?
Do a get info on the drive. Look under ownership and permissions. Check the box that says ignore ownership on this volume. Does not apply to fat 32.
In Terminal, the user shows as "501" - my userid is "frank" and the UID is "502". Even when I am logged in as Root, I can't use the chmod or chown commands. Any way to get around this?
I read that you cannot do chmod or chown on a fat 32 file system.
Is there any way to create a new user with a uid of 501? I tried NetInfo and didn't see any way to do it.
You can use net info manager to change a UID. You have to click on is the lock to unlocked a record. I think you also have to change the directory so that you can log on to the id.
Robert
Message was edited by: rccharles

Why is the bounce not reflecting volume changes in my bass track?

I am running Logic Pro 9.1.7. I have input a bass guitar directly through an Apogee Maestro 2 using the direct input setting. When I use the mixer, all of the functions seem to work fine on the bass track (fader, volume, plun-ins, etc), but when I bounce the track the volume of the bass is still at the original input setting even though it was materially reduced (-15 db or more) in the mix. All of the other settings in the mixer (fader, plug-ins, etc) appear to be properly reflected in the bounce. Only the volume reduction seems to be missing After some experimenting it seems that the bounce may reflect an increase in volume in the mixer over the original bass guitar input, but it is hard to be sure because Logic only permits a 6db increase in volume and the bounce is being played through iTunes, so subtle differences are hard to detect. But even a -50db reduction in the bass mix produces a lound and clear bass in the bounce at the original input level.. This problem is not present for any track that was input through a microphone.
I have searched in vain for an explanation. Software glitch? Some parameter not set right? Any suggestions greatfully welcomed.

The latter. I just recorded a bass track as an audio track along with tracks for guitar, banjo, harmonica, etc. (I bounce off line so playing along with the bounce is not possible.) The thing is that the other instruments I play are all acoustic, so they go on their tracks through a mic. The bass is an electric bass guitar, and while I have an amp and could mic it, it just seemed easier to put it on a track by plugging it right into the preamp, which has an "instrument" input setting as an alternative to the "microphone" input setting.
What is so screwy about this is that the normalize function in the bounce window should make proportionate adjustments to all instruments. At least that's what the owner's manual says it does. But what it seemed to be doing is treating the directly input bass and the microphoned instruments seperately. I usually record the bass track at a fairly high input so that I can clearly hear it in the headphones as I play over the previously recorded instruments and vocals. Then I rely on the mixer to bring down the volume of the bass to a more reasonable level in the final mix. But with the normalize function on in the bounce, the bass was still coming through in the bounce at the original input level or something very close to it. That would be fine if the other instruments were properly jacked up as well so that the bounce sound like what I heard through the mixing board, only louder. But what I got was a mix with all of the all the other miced instruments sounding just like they did through the mixing board and the bass blasting away at the original recorded level notfwithstanding the volume reduction on the mixing board. Very strange. I assume this is a software bug, but now at least I have a reasonable work around. Thanks again.

HT4946 My iPod connection to wifi is grayed out. My iPod won't connect. The only thing that has changed is that I downloaded the iTunes software as requested. What do I do now?

I connected my wifi to my iMac and was asked if I wanted to download the most current update. I backed up my iPod and did the download. My iPod was able to connect to the internet at my friend's house, but it hasn't been able to connect since then, and the connection to wifi is grayed out. Nothing has changed with the network; just the updated software.
The update occured on 06/08/13 at 10:41 PM
Please help.

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Using the same photos and music between two user accounts in the same Mac

Hi,
I think this question might have already been asked in the forum.
1. I have one MacBook Pro and two user accounts (One for me and one for my wife)
2. We are having two seperate iPhones with seperate AppleIDs
3. We want to maintain the apps / calendar / mail / reminders / contacts as seperate - Through iCloud (Seperate Apple ID approach) - All this is fine
4. All we want to have it shared is the Music files and the Photo library without duplicating
I have tried the shared folder approach for the music and having the iTunes point to that directory for the libary location in the preferences but unfortunately if she adds a folder to the library mine does not get updated unless I do a add folder to library and vice versa.
Whats the best way to deal with the Photos / Music sharing between two user accounts on the same mac
Thanks
Shas

To give other users read-only access to your iTunes library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
To give others selective access to your iPhoto library, you have the option of using iCloud Photo Sharing, if the privacy implications don't bother you. The images will be stored temporarily on Apple servers.
If you want to give full read/write access to more than one user, see the support articles linked below.
iTunes: How to share music between different accounts on a single computer
iPhoto: Sharing libraries among multiple users
There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions.

Why is the image on my screen changing when I switch between the library and develop modules?

I've noticed in the past couple of days that I will be refining an image in the develop module, feel I've gotten it the way I want it to look, and then switch back to the library module to export. When I do so, I notice the colors are quite different than they were just a second ago in the develop module. When I switch back to the develop module, it goes back to the way it looked in the develop module. How might I fix this?

Is what you see in Library the original, camera-embedded preview or is it just a messed up version of the LR-rendering? You can test this by making a significant change to an image with the problem (Exposure -4 or Saturation +100) and see if the Library Preview also darkens (or the colors saturate) significantly or not. You might also try explicitly telling LR to recompute the Standard then the 1:1 preview to see if either of those show up in Library.
If the Library view never shows any LR adjustments and is always the camera-embedded JPG preview or a LR-preview from some days ago that never changes no matter what you do in Develop, now, then your Previews cache is likely corrupted and the entire should probably be deleted so LR can rebuild them. The previews folder is called catalogname Previews.lrdata and is a subfolder of where your catalog file (.lrcat) is stored. You can location your catalog by going to the General tab in the Catalog Preferences and clicking the Locate button. You should exit LR before trying to delete the Previews subfolder and make sure you’re not deleting the catalog or backups folder, just the folder with Previews.lrdata in the name.
If the Library view just shows a different-looking version of the LR adjustments then perhaps something is wrong with the display-driver or the monitor’s color profile.

Is there any merit to the many complaints I've found in user reviews of the T61?

I fell in love with the T61 by spec. I'm also am very fond of the idea of having a solid black laptop. I started laptop life with an old toshiba that was solid colored and had a trackpoint cursor. Two things that have deeply disappointed me over the years are the disappearance of that cursor and the introduction of cheesy chrome and silver painted panels. Within a month of use they show scratches and wear and look like hell. What's the point of that?
So I went searching for the best budget laptop (1200USD range) for use primarily with cad software. I soon found myself at the Lenovo direct site where the T61 with downgrade to winxp, nvidia quadro graphics, and a faster 7200 hard drive still came in under 1100USD. Wow!
Then I did the usual for me. I researched it to death.. literally. I discovered a really withering load of complaint about this laptop in a number of review sites. "Off center" screen was a common complaint. Constant system crashes. Hardware incompatibilities with Vista. Nightmare scenarios with customer support (this is typical of any computer product, but the level of vitriol and the specificity was pretty scary). Many comments from longtime IBM lovers seemed to suggest that Lenovo has not lived up to the marque.
I'd really love to be well disabused of these perceptions. The T61 on sale right now at Lenovo direct seems to be a really unbeatable value. Please help me with considered responses and not defensiveness. I'm completely open minded at this point. Where are all of the negative reviews coming from?
Message Edited by bjamesw on 10-11-2008 04:47 PM

Prior to ordering my T61, I read all the same scary reviews. I loved the T61's specs and everything about it on paper, but was truly apprehensive because of these reports. Despite my fears, I ordered and held my breath. To ease the nerves, I bought an extended 3 year warranty from Square Trade.
Well, I've had my T61 since April, 2008. It is a solid, dependable, predictable, well made, beautiful piece of equipment. I have not had one single, physical problem with this computer - and not one single blue screen of death. I use this computer for many hours every day. And I'm not afraid to install many different apps on it.
I’ve never had to call or email Lenovo to report a problem. I’ve really had nothing to complain about.
Think about this: Most of these negative reviews are written by idiots who don't know what they are doing or talking about, and who shouldn't be allowed to touch a computer. Typically, these naysayers are impatient, do rash things, install software incorrectly, don't treat equipment with proper care, and/or have unrealistic expectations. As an IT professional, I’m well acquainted with the things that “just happen” in the user community.
Read the critiques published by professional reviewers – and there are many. Big difference, because these reviewers know what they are doing. Sure, there are some things they don’t like, but you read none of the ghoulish horror stories about crashing, won't boot, and blue screens of death that the idiots publish. It’s so unfair when these nincompoops make negative comments about equipment or software, dragging names thru the mud, when they themselves are the source of their own grief. So when reading reviews, consider the source.
I ordered Windows Vista Business, and I like it a lot. No major problems, no complaints. I can't understand all the negative press. Again, consider the source when reading the unfavorable reviews. Some people are compelled to be snobs.
The offset screen: I wondered about it too because of the reviews, but it is truly a non-issue. Your eyes focus on the screen, not the bezel. The (slightly) unequal bezel doesn't even catch your eye, or register with your brain. Forget about it.
I bought a loaded T61 from Lenovo direct: T8300 (2.4GHz) with the 14.1WXGA +TFT, 7200 RPM 160GB drive, 2GB RAM, Turbo Memory, Bluetooth, Fingerprint reader, larger battery, etc. The price was $989, plus I got another $40 off from FatWallet.com. Go online, check for discount coupons everywhere before you order.
Is everything perfect? No, Lenovo is pretty good with maintaining its system software, but there’s a little room for improvement.
Overall, I have no regrets owning my Lenovo T61. I continually compare it to other laptops. I love it. The only thing I regret purchasing is the extended warranty. I don't think I'll need it.
Message Edited by BudLP on 10-13-2008 10:38 PM

Using the color picker component to change background is coving up the rest of the elements

Hello,
I am trying to learn some scripting for components.
I have a bunch of stuff working and I got the color picker component to change the color of a movie clip and another one to change the text color.
I have another script that does the background color, but, when I use it with this script, it covers up the other components.
How can I use the color picker to change the background color of the stage without covering up the the movie elements?
Here are the two scripts:
script one-works fine on the 2 elements it is targeting
import fl.events.*;
import fl.events.ColorPickerEvent;
myColPic.addEventListener(ColorPickerEvent.CHANGE,changeHandler);
function changeHandler(event:ColorPickerEvent):void {
    var colorInfo:ColorTransform = new ColorTransform;
    colorInfo.color = event.color;
    myBox.transform.colorTransform = colorInfo;
    trace(event.target.hexValue);
myTextPic.addEventListener(ColorPickerEvent.CHANGE,changeText);
function changeText(event:ColorPickerEvent):void {
    var colorTypeInfo:ColorTransform = new ColorTransform;
    colorTypeInfo.color = event.color;
    myType.transform.colorTransform = colorTypeInfo;
    trace(event.target.hexValue);
Script 2-works fine in an empty movie, but if I add it to the script above, those elements get hidden..
import fl.controls.ColorPicker;
import fl.events.ColorPickerEvent;
var bg:Sprite = new Sprite();
bg.graphics.beginFill(0x000000);
bg.graphics.drawRect(0, 0, stage.stageWidth, stage.stageHeight);
bg.graphics.endFill();
addChild(bg);
var colorPicker:ColorPicker = new ColorPicker();
colorPicker.addEventListener(ColorPickerEvent.CHANGE, colorPicker_change);
colorPicker.move(10, 10);
addChild(colorPicker);
function colorPicker_change(evt:ColorPickerEvent):void {
    bg.graphics.beginFill(evt.color);
    bg.graphics.drawRect(0, 0, stage.stageWidth, stage.stageHeight);
    bg.graphics.endFill();
Granted, I they are changing colors differently, but I am not sure how to change the stage color any other way with this component.
any thoughts out there?
thanks
babs

Thanks kglad!!!
that did it

The Method to reflect the changed OIM User Prifile to the Target Resource

Similar Messages

Maybe you are looking for