Active tab stopped highlighting

The active tab in my Firefox Window used to have a highlight.
I changed some other appearance color features
and the active tab highlight has dissappeared.
I don't know how to get it back.
And working without it is very difficult.

I kind of think you almost answered your own question, what did you change?
I can suggest something that would almost certainly be better than what you had.
Install the "Stylish" extension then you can install a style to provide tabs with color borders.
* '''Stylish''' :: Add-ons for Firefox<br>https://addons.mozilla.org/en-US/firefox/addon/stylish/
*'''Tab Color Underscoring active/read/unread (Fx3.6 )''' (for 3.6 through 6.0+)
*:Colors the bottom border of a tab with RED for active tab, BLUE for a normal tab, GREEN for a still unread tab, MAGENTA(FUCHSIA) for loading/reloading tab. In other words distinguishes tabs as active tab, viewed tab, unviewed tab. Does not affect the background color of a tab so that color usage on the tab will prevail. Bottom border color will show up even if tabs on the tabs bar have been squeezed down so much that only the favicon can be seen. (bottom color is not showing up on reduced height tabs in 4.0 and above).
*:You must also obtain install the '''TabVisited''' extension from dickvl's MozillaZine user page in order to use this style (link to his page is in the documentation)
*:http://userstyles.org/styles/24728/tab-color-underscoring-active-read-unread-fx3-6
Additional Styles you would probably find useful
* '''Bookmarks Toolbar Fx4 Blue/Folders, Red/Bookmarks''' - Themes and Skins for Browser (this is what I use puts them all on one row by eliminating icons)
*:Sets maximum bookmark width to 36em, if you think that is too wide modify the code to perhaps 170px<br>http://userstyles.org/styles/46947
* '''Scrollbar Menu''' - Themes and Skins for Browser (also does bookmark menus) - userstyles.org<br>http://userstyles.org/styles/52
* '''Scrollbar Context Menu''' - Themes and Skins for Browser - userstyles.org<br>http://userstyles.org/styles/54
Additional Extensions you would probably find useful
*'''Stay-Open Menu''' :: Add-ons for Firefox<br>https://addons.mozilla.org/firefox/addon/stay-open-menu/

Similar Messages

Top link bar tab not highlighted when subsite beneath subsite active

Scenario: All sites in a site collection share the same top link bar for consistent global navigation.
Site A (top-level)
    Site A1 (2nd level)
        Site A1a (3rd level)
    Site A2 (2nd level)
    etc.
Problem: When site A1 is active, tab "A1" is highlighted. When site A1a is active, no tabs are highlighted. And the bread crumbs do not include site "A1." So the user has no context to where they are in the site taxonomy.
In MOSS 2007 the behavior is different. Tab "A1" is highlighted when site A1 or any of its subsites is active. So when site A1a is active, tab "A1" is highlighted and the user knows where they are. This is good.
Question: How can I make SharePoint 2010 highlight the top link bar tabs in a similar manner to MOSS 2007?

I activated the "SharePoint Server Publishing Infrastructure" site collection feature, still it didn't work for me.
I have Custom Top navigation bar in my project.
Eg :   AAA   BBB   CCC   DDD
When i am into CCC site , if i create sites under this at three levels say. :
CCC > CC1 > CC2 > CC3 > CC4
The top navigation bar does not get highlighted when i am into CC4 site.
Actuly the top naviagtion bar should look like this :
Eg :   AAA   BBB   CCC   DDD
But it does not get highlighted and it shows normal like this . Eg :
AAA   BBB   CCC   DDD
Please suggest some solution for the same. Why Navigation does not work at this level.
Regards ,
Avinash

How can I get Firefox 4 to display the URL of active tabs in the location bar so I can see and copy it?

The only URL that I ever see in the location bar is the last one I typed there. No matter which tab I activate, the last typed URL is displayed. When I need to copy the URL of an active tab to paste into an email or something I can't see it.
The location bar used to display the URL of each active tab and you could simply click in the address field and the URL would be highlighted so you could edit/copy it or jump to the end of a very long URL to see the final file name.
I can't get this feature to work and I really need this feature as I need to copy URL's quite often. When I have multiple tabs active I sometimes forget which one is for which domain and need to see the URL. It is very annoying to surf blind.
Please help me with this issue as quickly as possible so I can once again do my work easily and with the firefox browser instead of chrome. :(

A couple of possible causes.
The first is the file that stores details of browsing history and bookmarks is corrupt. For details on how to fix that see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
Another possible cause is an add-on interfering with the location bar. To test this, use the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Jquery coda slider active tab state help for 2nd panel

Hi there
I have created a slider which can be viewed here:
http://alastaircaldwell.businesscatalyst.com/the-man/index.htm
when you click the first tab 'early life' it takes you to the first panel and the tab is highlighted red and active, when you click the right arrow to go to the 2nd panel the tab reverts to the off state however I would like it to remain on, any help would be greatly apprceiated as not sure if it is a css problem or jquery.

I'm not too familliar with Flexslider. I've been using another jQuery plugin called Cycle2 which performs well in all layouts! Copy & paste the following code into a new, blank document. SaveAs cycle_test.html and preview in browsers.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 document with Cycle2</title>

<script src="http://code.jquery.com/jquery-latest.min.js">
</script>

<script src="http://cdnjs.cloudflare.com/ajax/libs/jquery.cycle2/20130409/jquery.cycle2.min.js"></script>
<style>
.cycle-slideshow {margin:0 auto; width:50%;}
.cycle-slideshow img {max-width:100%}
</style>
</head>
<body>
<h1><a href="http://www.malsup.com/jquery/cycle2/">jQuery Cycle 2</a> Responsive Slideshow</h1>

<div class="cycle-slideshow"
    data-cycle-pause-on-hover="true"
                data-cycle-speed="1500"
                >

<img src="http://malsup.github.com/images/beach1.jpg">
<img src="http://malsup.github.com/images/beach2.jpg">
<img src="http://malsup.github.com/images/beach3.jpg">
<img src="http://malsup.github.com/images/beach4.jpg">
<img src="http://malsup.github.com/images/beach9.jpg">

</div>
</body>
</html>
Nancy O.

Pasteboard Turns Gray When Dragging a Tab Stop

I'm using InDesign CC on a Mac Pro 5,1 Quad-Core Intel Xeon running OS 10.6.8 with 7GBs of RAM. Whenever I highlight a text and drag a tab stop in the tabs palette, my entire pasteboard turns gray. It doesn't happen when I first start using the program each day but within a very short time, it starts.
Any suggestions?
Thanks,
Lloyd

Bob,
That's what I thought. I'm trying to convince the IT dept. here to upgrade to Mavericks but we have a few plug-ins that are version-specific (AutoPrice, Q2ID, etc.), so we'd have to upgrade all of them. I'm researching alternatives...wish me luck.
Lloyd

How can I automatically have a new tab always be a copy of the current active tab?

The add-on extension "NewTabURL" (by "sogame") provided the option I want and used for a number of years. But it stopped working when Firefox was updated to version 16.0. When I click for a new tab, all I get is a completely blank tab. How can I automatically have the new tab always be a copy of the current active tab?
Can the extension "NewTabURL" be revised to work in version 16 and/or version 17? If not, how else can I get the new tab functionality that I desire? I can't seem to find any other extension that provides that functionality.
Milt Beychok

My trackball has 4 buttons and a scroll wheel. Each of the 4 buttons is programmable. The 4 buttons are normally pre-programmed for single-click, double-click, drag and right-click by simply pressing on them
Each of the 4 buttons may be programmed to also have other functions. For example, I programmed "control/single-click" to produce a middle click. I could also have used "shift/single-click" or "alt/single-click" to produce the middle-click. Or I could have similarly programmed double-click or drag or right-click. The Kensington Expert Mouse is quite versatile ... once you get the hang of programming it.
I have had it for about 4 years and I had never had the need to program one of them until you told me about using a middle-click.
Milt Beychok

How Do I force SPRY accordion to position active tab at top of browser?

I am using the 'goToByScroll' script to try to force an accordion to open with the active accordion tab at the top of the browser window instead of the top of the entire accordion appearing at the top of the browser window. I believe the Accordion default setting of placing the accordion at the top of the browser window is interfering with the script. Does anyone know how to modify the JS file to stop the accordion positioning when a tab is selected? If I select the first panel it opens fine, but the second panel opens about half way down. Here is one of the pages:
http://www.davidkneale.com/wcusa/ecuador.html
Any help appreciated!
Thanks

Thanks for your reply. This appears to disable the goToByScroll functionality which I want to work. Apologies if my original post was confusing, but I believe it is the default browser position action of the Accordion that I think I want to disable.
If you click on the first accordion item it opens at the top of the browser window correctly, however if you then select the second tab beneath it the content scrolls up about half way above the top of the browser window. This problem could be unrelated to the default accordion position behaviour, however I've pretty much tried everything else to fix this!
The tabs are quiter large, and all I really want is for the active tab to be at the top of the browser window, not the entire accordion. Would prefer to use goToByScroll but will happily ditch it if this is not possible.

In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the Paragraph Designer.

In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the paragraph designer. Here are the steps to dysfunction:
1. In Paragraph Designer, for Tab Stops, click Edit. Edit Tab Stop dialog box opens, and the Paragraph Designer dialog box closes.
2. Type value in New Position box.
3. Click Continue. The Edit Tab Stop box closes.
4. Open Paragraph Designer. No tabs are recorded.
Discussion of a similar problem occured on this forum in June 2010. At that time, the resolution seemed to be to upgrade to 9.0.3. Has anyone else encountered this problem with these versions?
Thanks.

Hi, Arnis,
Brilliant! Thanks so much. I only looked at the later discussions of that thread, which seemed to indicate the problem would be solved by an upgrade to 9.0.3.
-Trish

When I click on the tab with a + on it, located next to the active tab a new page does not open. If I click on "New Tab" in the File menu a new tab does not ope

When I click on the tab with a + on it, located next to the active tab a new page does not open. If I click on "New Tab" in the File menu a new tab does not open.

Hi jcatx2013, we don't really have enough information on your system to make specific suggestions...
Could you test in Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?

Error while creating activities from Account application (Activity tab page

Hi Experts,
We are using CRM 5.0 with PCUI ( EP 7.0 version). We are getting below error when try to create activities from Account application in PCUI ( from activity tab page):
Error : Activity contains error.
Diagnosis
This transaction has errors.
Procedure
To correct the errors, go to the maintenance interface of the transaction.
To navigate to there, use the link to the account application
Pls suggest how to proceed with this error & helpful solutions would be rewrded generously.
Regards,
Basavaraj Patil

Hi Experts,
We are getting this error when try to create Activity from Account application in PCUI. But the same thing is working fine in at GUI level & actions profile assigned to Activity transaction is also working fine at GUI level. But in PCUIit is throwing this below error.
Diagnosis
You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
System Response
The follow-up transaction is not created.
Procedure
Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
Pls suggest solution for this.
Thanks in Advance.
Regards,
Basavaraj Patil

I am having two problems with tabs in FF 4.0.1: no close "x"; and new tabs don't open adjacent to active tab.

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/819008]</blockquote><br>
I don't know if it's a glith with mine, a change in the software, or a setting that isn't set, but my tabs don't have an "x" to close them.
Also, my previous version of Firefox opened a new tab adjacent to the active tab. Version 4.0.1 seems to have returned to the older standard of opening tabs at the end of the list. Is there a way to switch where new tabs open?

You can reset the tab prefs on the about:config page in case they have been changed.
* browser.tabs.insertRelatedAfterCurrent
* browser.tabs.closeButtons
If you want a close X on the first tab if only one tab is open then set browser.tabs.closeWindowWithLastTab to false.
* http://kb.mozillazine.org/about:config
* http://kb.mozillazine.org/Resetting_preferences
If you have tab related extensions then check their settings (Options).
* Tools > Add-ons > Extensions

Determine the active tab in a selection screen

Hello,
is it possible to determine which tab is currently activated in a selection screen with several tabs?
I will include different code in different tabs. When pressing the "execute" button the program should return the active tab (as a value).
Thanks
Florian Schwaiger

Hi florain,
Before you can use a tabstrip control in your ABAP program, you must create a control for each control in the declaration part of your program using the following statement:
CONTROLS <ctrl> TYPE TABSTRIP.
where <ctrl> is the name of the tabstrip area on a screen in the ABAP program. The control allows the ABAP program to work with the tabstrip control. The statement declares a structure with the name <ctrl> . The only component of this structure that you need in your program is called ACTIVETAB.
Use in the PBO event
Before the screen is displayed, you use the control to set the tab page that is currently active. To do this, assign the function code of the corresponding tab title to the component ACTIVETAB:
<ctrl>-ACTIVETAB = <fcode>.
When you page at the SAPgui, you only need to do this once before the screen is displayed. This initializes the tabstrip control. The default active tab page is the first page. After this, the page activated when the user chooses a tab title is set within SAPgui.
When you page on the application server, you must assign the active page both before the screen is displayed for the first time, and each time the user pages. At the same time, you must set the required subscreen screen.
You can suppress a tab page dynamically by setting the ACTIVE field of table SCREEN to 0 for the corresponding tab title.
Use in the PAI event
In the PAI event, ACTIVETAB contains the function code of the last active tab title on the screen.
When you page in the SAPgui, this allows you to find out the page that the user can currently see. When you page at the application server, the active tab page is controlled by the ABAP program anyway.
The OK_CODE field behaves differently according to the paging method:
Paging in the SAPgui
When you page in the SAPgui, the PAI event is not triggered when the user chooses a tab title, and the OK_CODE field is not filled. The OK_CODE field is only filled by user actions in the GUI status or when the user chooses a pushbutton either outside the tabstrip control or on one of the subscreens.
Paging on the application server
If you are paging at the application server, the PAI event is triggered when the user chooses a tab title, and the OK_CODE field is filled with the corresponding function code.
To page through the tabstrip control, you must assign the function code to the ACTIVETAB component of the control:
<ctrl>-ACTIVETAB = <ok_code>.
This statement overwrites the function code of the last active tab page with that of the new tab title. At the same time, you must ensure that the correct subscreen is inserted in the subscreen area.
Otherwise, tabstrip controls are handled like normal subscrens in ABAP programs, that is, the ABAP program of a subscreen screen must contain the dialog modules called from the flow logic of the subscreen.
Examples
Tabstrip control, paging at SAPgui
REPORT DEMO_DYNPRO_TABSTRIP_LOCAL.
CONTROLS MYTABSTRIP TYPE TABSTRIP.
DATA: OK_CODE TYPE SY-UCOMM,
      SAVE_OK TYPE SY-UCOMM.
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE USER_COMMAND INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'OK'.
    MESSAGE I888(SABAPDOCU) WITH 'MYTABSTRIP-ACTIVETAB ='
                                  MYTABSTRIP-ACTIVETAB.
ENDIF.
ENDMODULE.
thanks
nagendra

How to Make the label of the active tab-page BOLD?

Hi All
I am working on forms 10g(version 10.1.2.0.2 ) with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on windows 2000 platform.
My requirement is to make the label of the active tab-page either in italics or with a different color or make it BOLD than the other pages of the canvas.
Any suggestions ?
Regards
Mohan

there are no properties for those requirements on tab-pages. You can't do it.
Setting italic for all Tabpage-Labels is possible, when you change it in the canvas-properties. But you can't change only one tabpage.
One Solution is, what Jeneesh said: Active-Style. But only "Bold" and for the active tab.
Gerd

[JS CS3] Tab Stops in Table

Below is a function that would delete all existing tab stops in a column and the add a new tab stop.
function TabStopper (myPosition, xx){
myTable.columns.item(xx).cells.everyItem().texts[0].tabStops.everyItem().remove();
myTable.columns.item(xx).cells.everyItem().texts[0].tabStops.add({position:myPosition, alignment:TabStopAlignment.CHARACTER_ALIGN, alignmentCharacter:")"});
The problem is that this works well with CS2 but not with CS3. In CS3, only the tab stops in the last cell of the selected column are removed. Can anybody please help analyze what the problem is. Thank you so much.

Joaquin,
Strange indeed that that doesn't work. You can get around it by using this method:
function TabStopper (myPosition, xx){
myTable.columns.item(xx).cells.everyItem().texts[0].tabList =
[{position:xx, alignment:TabStopAlignment.CHARACTER_ALIGN, alignmentCharacter:")"}];
When you set a tabList like this, any other tabstops are deleted, and this works in CS3. (CS4 restores CS2's behaviour.)
Peter

How to handle tab stops when converting from Frame to RoboHelp

I have several examples of programming code that have tabulated indentations in the FrameMaker documents I have inherited.
But when I convert to RoboHelp, the tab stop is only recognized by a single space.
What would be the best way to deal with this? There are so many examples, and sometimes there can be multiple levels.
Remember, all these manuals have already been written in Framemaker, so the less I have to manipulate these samples, the better!
Thanks

Did anyone from Adobe get back to you on this bug?
Now that TCS3 is out there, did they fix it?
Do you know how we can find out the status of this and other issues with Adobe?
We have been very disappointed with TCS2 and if Adobe hasn't fixed known issues from that version, I wonder if they will in TCS3...or ever? Flare is looking pretty good at this point.
Missy

Active tab stopped highlighting

Similar Messages

Maybe you are looking for