[JS CS3] Tab Stops in Table

Below is a function that would delete all existing tab stops in a column and the add a new tab stop.
function TabStopper (myPosition, xx){
myTable.columns.item(xx).cells.everyItem().texts[0].tabStops.everyItem().remove();
myTable.columns.item(xx).cells.everyItem().texts[0].tabStops.add({position:myPosition, alignment:TabStopAlignment.CHARACTER_ALIGN, alignmentCharacter:")"});
The problem is that this works well with CS2 but not with CS3. In CS3, only the tab stops in the last cell of the selected column are removed. Can anybody please help analyze what the problem is. Thank you so much.

Joaquin,
Strange indeed that that doesn't work. You can get around it by using this method:
function TabStopper (myPosition, xx){
   myTable.columns.item(xx).cells.everyItem().texts[0].tabList =
[{position:xx, alignment:TabStopAlignment.CHARACTER_ALIGN, alignmentCharacter:")"}];
When you set a tabList like this, any other tabstops are deleted, and this works in CS3. (CS4 restores CS2's behaviour.)
Peter

Similar Messages

  • Tab stops in table cell

    ID CS3 - If I have multiple tab stops in a table cell, is there a keyboard shortcut I can use to "tab" over to these stops?

    hmmm...my test layout seems to work well, but I will add another few rows of data. I have approximately 20 to 30 fields, and one of the fields references an image. So far, the two test rows have populated the fields correctly in ID when I've created the merge document. Was there any particular issues, or could you point me to something specific so I can check it out?

  • IBooks Author strips tab stops from Table of Contents

    Tab stops that are generated from section names are stripped from published iBooks Author files.   When I click on Table of Contents in iBooks Author, I can see it exactly like it should be.  Please see the screenshot that I have uploaded tabs.jpg. 
    Please note the Tab stops of the inspector that are in the screenshot.  It shows clearly that I have made a number of tab stops and how it should be displayed. However, please download the following file to see how the tab stops are stripped from the .ibooks file that is created when I publish it:
    http://ishqdesign.com/tabs/
    I am in immediate need of a solution for a large book that I am in the process of publishing.  Please advise.
    Thanks,
    J

    The iBA Help has info on: table of contents
    Which includes:
    Each book comes with a table of contents that is updated automatically. You can view the table of contents at any time by selecting Table of Contents in the sidebar. The table of contents includes a default set of items, but you can change which items appear. A table of contents can include:
    Chapter and section titles: All chapter and section titles are included in the table of contents by default. If you remove a section from the table of contents, all other sections that use the same layout are removed as well.
    Text that uses specified paragraph styles: By default, the table of contents includes all paragraphs in the book that use the Heading 1 and Heading 2 style, but you can include whichever styles you like. Paragraph styles appear in the table of contents only in portrait orientation. See Format text using styles.
    The way the table of contents looks depends on the current page orientation. In landscape orientation (shown below), each chapter has its own contents page, with navigation buttons at the bottom. In portrait orientation, the entire book’s table of contents is visible as an expandable list.
    Add or remove items in the table of contents
    If the Document inspector isn’t open, click Inspector in the toolbar and click the Document Inspector button.
    Click the TOC button.
    Do either or both of the following:
    To add an item: Click the Add pop-up menu , choose Add Paragraph Style, and choose an option from the submenu.
    To remove an item: Select the item you want to remove and click the Delete button .

  • InfoView ignores CR 10 tab stops!

    To all:
    I have a report in Crystal 10 in which I set tab stops within a text box to creat text in a tabular format. I have headings and data fields on the next line, at the same tab stops.
    When I populate the report within Crystal, the mini-table appears formatted correctly.
    However, when I pull up the report in Business Objects InfoView, all of the tabs seem to have disappeared. All of the headings and the data are bunched together at the left margin instead of being tabbed over to the middle of the page in tabular format.
    Any help would be appreciated.
    GL

    Hi GL,
    There is possiblity that the version of crystal viewer is not compatible with the version of Business Objects Infoview. Try and use the same version of crystal viewer.
    Also, if you go to infoview prefrences --> crystal reports, you have an option to switch between different viewers such as activeX, java, html etc. Try using these.
    Hope this helps.
    Regards,
    Jay.

  • Adobe [program name] CS3 has stopped working....

    I am attempting to run programs from the Adobe CS3 suite on my laptop, which runs with Windows Vista. My Adobe CS3 programs all show the "Adobe [program name] CS3 has stopped working" message, followed by a brief attempt to fix the problem by windows. Until this morning, the programs had been running without incident for several months.
    Does problem sound familiar? What can be done to solve it?

    Lots of things are known to cause issues with the CS3 installer, including besides the obvious antivirus and spyware scanners and firewalls things like iTunes, instant messengers, browser helper toolbars like the Google Toolbar, and previous versions of the Flash player, which I would have thought would be removed by the clean script, but there is a tool here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2
    Also, be sure jscript.dll is properly registered. It won't hurt to do that again. Click Start > Run and type regsvr32 jscript.dll with the space, but without the quotes, and hit enter. You should see a dialog saying it was successful.
    Click Start > Run and type MSconfig and hit enter. Disable all non-essential services and all non-essential items in the startup items, particularly anything to do with Anti-virus, spyware protection or third party firewalls, and then reboot. You can hide all Microsoft service in the services tab of MSconfig to make it easier, and most of whats left will be non-essential, though if anything looks like it has to do with your DVD drive or your mouse youll want to leave it checked. Its probably safe to turn off everything in the Startup tab, but again, if you recognize a mouse driver, leave it on. MSconfig will run as soon as you restart the computer and if everything seems OK, just cancel for the moment.
    Be sure the Windows firewall is disabled. Third-party firewalls should have been disabled in Msconfig. Other things that should be disabled include any instant messenger, iTunes, and Google toolbars or similar from other vendors if you run them.
    Be sure Java is enabled in the browser, and that you have a default printer (LOCAL - can be fax viewer if necessary) online.
    After the installer runs, reboot, and when MSconfig starts change it back to "Normal Startup" and reboot again.
    Peter

  • Problem with tab stops in InDesign CS6

    Hi there.
    I'm trying to align large numbers (with two stops) like
    1.229
    102.864
    7.075
    2.140.753
    2.251.921
    in Indesign CS6. Obviously I'd like them to align on the second dot.
    After choosing OpenType > Tabular Lining from the Character Panel menu I am able to align them almost perfectly. However upon closer inspection I can see that the second dot is not aligned perfectly like it should. Why is that? Any help would be greatly appreciated!
    Thanks!

    Hi Donvinoth,
    Sure! If you look at the examples above, I've tried three different options and settings using the Minion Pro font. Selecting "OpenType > Tabular Lining is not even necessary as I've come to learn.
    Example A: a normal textbox in which I've selected all the numbers and then chosen "Align right". The numbers then align perfectly on the second dot.
    Example B: a normal textbox with several columns and different tabs options. You can see which one I've used on the individual columns by the title above. Notice how the decimal option is not aligning the numbers by the second dot? The only solution to the problem is to choose the "Right-justfied Tab" in the tab options, as shown in the last column. Aparently you can't make the decimal tab align on the second dot like this in InDesign yet but perhaps they'll make it possible in another version.
    Example C: I've inserted a table into a textbox and and then used different tabs options on the columns; notice how the decimal tab is working like it should in this case? In order to insert a tab in a table you need to place your curser right in front of the number and then right-click your mouse, choose Insert special character > Other > Tab. You can also choose to make the row and column stroke invisible in the table Table options if need be, which will make it look exactly like a normal textbox.
    This won't work with fonts like Dosis as it's not suitable for tabular work where you want figures to line up vertically like Spier said, so you need to choose a font like Minion Pro or something similar to it.
    I'm not sure if that solves your problem. If not then please attach a picture of the issue you're having and I'll try my best to help you.

  • In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the Paragraph Designer.

    In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the paragraph designer. Here are the steps to dysfunction:
    1. In Paragraph Designer, for Tab Stops, click Edit. Edit Tab Stop dialog box opens, and the Paragraph Designer dialog box closes.
    2. Type value in New Position box.
    3. Click Continue. The Edit Tab Stop box closes.
    4. Open Paragraph Designer. No tabs are recorded.
    Discussion of a similar problem occured on this forum in June 2010. At that time, the resolution seemed to be to upgrade to 9.0.3. Has anyone else encountered this problem with these versions?
    Thanks.

    Hi, Arnis,
    Brilliant! Thanks so much. I only looked at the later discussions of that thread, which seemed to indicate the problem would be solved by an upgrade to 9.0.3.
    -Trish

  • Adobe Photoshop CS3 has stopped working... HELP?

    Everytime I try to make a GIF, and I select the length of the video, and press okay, a box comes out saying: Adobe Photoshop CS3 has stopped working. I've tried the "CTRL-ALT-SHIFT," but it doesn't work! Please help? ):
    I make a GIF like this: File-Import-Video Frames to Layers.
    Oh, and I have a Adobe Photoshop CS3 Extended.

    You'll probably going to have to uninstall, then re-install the application; but you need to provide a lot more information;
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Adobe Photoshop CS3 has stopped working: A problem caused the program to stop working correctly.

    I recently purchased a new desktop computer and installed Adobe CS3 Master Edition on it and I get the following error:
    Adobe Photoshop CS3 has stopped working: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    Out of the entire suite of tools only Photoshop will not launch. The weird thing is i also had the same Adobe programs installed on my laptop and I have not made any installation updates to that machine and i am getting the same error. I have always installed the same software on my two home machines with no problem until now. Any help is appreciated.
    Thanks,
    Andy

    You'll probably going to have to uninstall, then re-install the application; but you need to provide a lot more information;
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Windows 7   " Adobe Photoshop CS3 has stopped working "

    Okay let me stir up a whole new kettle of fish WINDOWS 7 VS CS3 PHOTOSHOP.
    I have Windows 7 Ultimate Edition 64bit. I am running (or trying) CS3 Master suite. Most all progams function except Photoshop. I try to load it and I get "Adobe Photoshop CS3 has stopped working" and then there is no fix and no help. Photoshop ran on Vista 64bit just fine.
    I'm curious if anyone else is having this same issue? If so have you found any clue as to the issue?
    I get the feeling this could be a conflict with a windows 7 update or something?
    Any fixes?

    Try right clicking on the PS CS3 icon and run as admin. I can tell you that people have a lot of problems in running PS CS3 in Windows 7 and had to download the Windows XP virtual and run CS3 in virtual mode.
    Anyways here is a link to the suite forums. They may have a better answer there for you.
    http://forums.adobe.com/community/creativesuites/creativesuites_windows

  • Help! CS3 has stopped working

    I get an error message from windows vista premiumm home.
    It just says: Adobe Photoshop CS3 has stopped working correctly. Windows will close the program and notify you if a solution is available. The only option is a box that says "close program". Once you close it everything goes away. It doesn't even give you a hint of what the problem could be. I installed creative suite 3 web premium on this brand new computer about 2 weeks ago. This is a first time install of this software, but when I called Adobe they said they don't offer free installation help anymore on cs3 because cs4 is out now. Anyone have a clue what I should do? I can't just uninstall photoshop, if I try it wants to uninstall all 8 programs.

    try resetting the preferences, per this FAQ:
    http://www.adobeforums.com/webx/.ef4a07f/1

  • How can i set tab within a table?

    how can i set tab within a table?

    With a live insertion point in a cell, type Alt/Opt+TAB, or, right-click and choose > Insert Special Character > Other > Tab, or, press Ctrl/Cmd+Shift+T to bring up the Tabs panel.

  • How to handle tab stops when converting from Frame to RoboHelp

    I have several examples of programming code that have tabulated indentations in the FrameMaker documents I have inherited.
    But when I convert to RoboHelp, the tab stop is only recognized by a single space.
    What would be the best way to deal with this? There are so many examples, and sometimes there can be multiple levels.
    Remember, all these manuals have already been written in Framemaker, so the less I have to manipulate these samples, the better!
    Thanks 

    Did anyone from Adobe get back to you on this bug?
    Now that TCS3 is out there, did they fix it?
    Do you know how we can find out the status of this and other issues with Adobe?
    We have been very disappointed with TCS2 and if Adobe hasn't fixed known issues from that version, I wonder if they will in TCS3...or ever? Flare is looking pretty good at this point.
    Missy

  • How to remove tab stops at one shot after importing a word document

    HI everyone,
    This is my first post in Framemaker Community as I am moving from RH to FM.
    I have an issue with respect to importing word documents to Framemaker.
    After I have import a word to doc to FM multiple tab stops are created.
    Now, although I remove the tab stops manually once, If I place my mouse in the next line , the tab stops are seen again.
    Is there any shortcut wherein I can remove tab stops at one go after I import a word document in Framemaker.
    Thanks in advance.
    Regards,
    Parag

    Edit > Find / Change
    Find: Text: [ \x08 ]
    Change To Text: [ \x20 ]
    <*> Document
    [ Change All ]
    This would change all tabs to ordinary spaces. You can actually just type a tab and space character, but I used the hex notation so you see what you're doing. The space could be any other character(s) you desire, or no characters at all (make sure the To Text: field is empty).
    Hex codes?
    Found here on one of my installs:
    C:\Program Files (x86)\Adobe\FrameMaker9\Documents\Character_Sets.pdf

  • How to add table attributes to start stop html table item

    Hello,
    I want to put a frame around a number of items between a start/stop html table item. How can I do that?
    Can I add border= "1" somewhere?
    Thanks for the help

    Hello,
    You would do something like this
    <style>
    .formlayout{border:1px solid red}
    </style>
    But how can I put it on and off then? You could use some javascript to do it or use the region id and then get the second table in the region body with that class name, there are a couple different ways to do it but none are simple and out of the box.
    If you can out an example page on apex.oracle.com it will be much easier to help you out with the exact code.
    It will be much simpler to do in 3.1 which is why that enhancment was put in.
    Regards,
    Carl
    blog : http://carlback.blogspot.com/
    apex examples : http://apex.oracle.com/pls/otn/f?p=11933:5

Maybe you are looking for