AD does not respond to DNS adn DHCP server anymore and doesnot accept new computers

Hi guys
I had some trouble with my Setup as i took over from someone else. I had some trouble setting up the VPN server on the windows server 2008 R2 and by the way the issue was the internet was getting too slow until it was literally stops (ping time 10000 ms
) if we have changed the modem the problem would temporarily resolved but it comes back after a couple of weeks or days. i play around with the DNS server and problem is still there when i point the DNS to the Telstra DNS servers.
this problem has caused another problem which is my question , it came to me when i tried to add another PC to the Domain and it could not resolve the AD to connect the domain. plus the existing computers are not resolving the password update and so on which
seems to be from the same problem any idea about this issue or anybody had some similar issue and resolution i will highly appreciate it

Hi,
To better analyze this issue, would you please post the result of running "ipconfig/all" on the Domain Controller? In addition, when you add another computer into the domain, what is the error message you have recieved?
Best regards,
Susie

Similar Messages

HT4061 the screen is blank and the phone does not respond even after pressing the on/off and home button. the only reaction is the vibration felt when I plug in to charge the phone. What should I do?

The screen of my iphone 4 is blank and the phone does not respond even after pressing the on/off and home button, the only reaction is the vibration felt when I plug in to charge the phone. What should I do?

This is the ipod touch forum

DHCP Client does not send host name to DHCP Server

Hello,
I installed Solaris 10 on VirtualBox and I cannot ping/ssh/telnet the virtual machine by its host name (even from the host computer) but only by it's ip.
I tried everything I could find on internet with no success (I don't want to add the hostname in every hosts file on every computer because it's not really professionnal)
I followed what said here: http://docs.oracle.com/cd/E26505_01/html/E27061/eyhuv.html#scrolltoc
Can someone has an idea of what I can do or why this does not work.
I installed a virtual Windows7 and an Ubuntu, and it worked perfectly.
Any help would be grantly appreciated.
Thank you
Here is my current configuration:
Oracle VM VirtualBox 4.3.8 (I choose "Oracle 10 10/09 and later (64 bit))
Oracle Solaris 10 1/13
Network: bridge with RealTek interface
NB: I don't have access to dhcp server on my netgear router (access is disabled by my ISP)
Files in /etc:
dhcp.e1000g0 (empty)
nodename (contains "thorgal")
nsswitch.conf has following lines:
hosts: files dns # Added by DHCP
ipnodes: files dns # Added by DHCP
networks:   files
protocols: files
rpc:        files
ethers:     files
netmasks:   files
bootparams: files
hostname.e1000g0 (contains "inet thorgal")
/etc/inet/hosts:
::1             localhost
127.0.0.1       localhost loghost
192.168.0.17    thorgal # Added by DHCP
/etc/default/dhcpagent:
REQUEST_HOSTNAME=yes
PARAM_REQUEST_LIST=1,3,6,12,15,28,43
.v6.PARAM_REQUEST_LIST=7,12,23,24,27,29
I also try "ifconfig e1000g0 dhcp release" with no success
the debugging of dhcpagent:
# pkill -x dhcpagent
# /sbin/dhcpagent -d1 -f &
1088
# ifconfig e1000g0 dhcp start
/sbin/dhcpagent: debug: insert_pif: e1000g0: sdumax 1500, hwtype 1, hwlen 6
/sbin/dhcpagent: debug: set_packet_filter: set filter 805869f (DHCP filter)
/sbin/dhcpagent: debug: get_smach_cid: getting default client-id property on e1000g0
/sbin/dhcpagent: debug: in state INIT; allowing start command on e1000g0
/sbin/dhcpagent: debug: ipc_action_start: started start (command 4) on e1000g0
/sbin/dhcpagent: debug: set_smach_state: changing from INIT to INIT_REBOOT on e1000g0
/sbin/dhcpagent: debug: dhcp_selecting: host thorgal
/sbin/dhcpagent: info: configure_v4_lease: setting IP netmask to 255.255.255.0 on e1000g0
/sbin/dhcpagent: info: configure_v4_lease: setting IP address to 192.168.0.17 on e1000g0
/sbin/dhcpagent: warning: configure_v4_lease: no IP broadcast specified for e1000g0, making best guess
/sbin/dhcpagent: info: configure_v4_lease: using broadcast address 192.168.0.255 on e1000g0
/sbin/dhcpagent: info: configure_v4_timers: e1000g0 acquired lease, expires Fri Mar 21 21:33:05 2014
/sbin/dhcpagent: info: configure_v4_timers: e1000g0 begins renewal at Fri Mar 21 09:33:05 2014
/sbin/dhcpagent: info: configure_v4_timers: e1000g0 begins rebinding at Fri Mar 21 18:33:05 2014
/sbin/dhcpagent: debug: set_smach_state: changing from INIT_REBOOT to PRE_BOUND on e1000g0
/sbin/dhcpagent: info: added default router 192.168.0.1 on e1000g0
/sbin/dhcpagent: debug: set_smach_state: changing from PRE_BOUND to BOUND on e1000g0
/sbin/dhcpagent: debug: configure_bound: bound e1000g0
/sbin/dhcpagent: debug: ipc_action_finish: finished start (command 4) on e1000g0: 0

During the Solaris installation process, you told it what the hostname was going to be and that you wanted that environment to exist with a dynamic IP address instead of a specific address that you desired.
When Solaris boots it broadcasts that hostname and waits for a DHCP server to be quasi-intelligent enough to award an IP address based upon a pre-configured list inside that DHCP server.   Hostname ABC would always get IP address 123 on subnet rst, hostname DEF would always get IP address 456 on subnet xyz, and so on and so on.
That's the fundamental process for proper (and thus secure) DHCP.
All your other environments (Windows, Debian, Ubuntu) are what might be thought of as "hacked for convenience" to get around that sort of network configuration. They take the lazy way to exist. That partial networking setup is good enough for a home network but would be miserably insecure in a corporate environment. Those choices are operating environments that are nice for end-user desktops but aren't Enterprise Class.
My suggestion?
Review the IP address range in your Netgear router's setup.
It is likely something like 192.169.0.1 through 192.168.0.50 and can be customized.
You probably don't have 50 devices on your network and probably will never have 50 simultaneous devices on your network.
... just do a reconfigure reboot and set your Solaris to use a static IP of 192.068.0.45
Then reboot and I predict your issue that prompted this forum thread will be gone.
That's how I've done it at home for many years, even when installing Solaris to bare metal (no virtualization).

Iphone 5 home button does not respond, brightness reduces by itself, wont charge and its one week since i got it!

one week since i got the iphone 5: screen blacks out, when i finally get it to light up the light brightness turns low.
problems charging phone, just doesnt want to charge unless i reset the phone.
the main home button does not respond at times, approx 3-5 times a day this occurs
phones touch screen does not respond at times...whole touch screen, no response!
signal always drops out, this could be a network issue though i doubt it.
speaking to quite a few peopl i know, they are havng the same issues with there 5 but not as often as myself.
if i knew the 5 had so many issues i would not have chosen it, the 4s was fine!

Then take it back! If you've only had it for a week, you still have 51 weeks of warranty. If you are in the USA, you are also within your 14 day unconditional return for full refund period. If it has that many problems, just return it and get another one, or get your money back and buy something else. There is no reason to live with a faulty device after just one week.

Firefox does not respond. it seems i had an upgrade and i don't think it's worked since that

when i try to open it now it says is's already running but it's not. If I get the task manager up it does not show that firefox is running

To submit a Viber help desk ticket, go to http://helpme.viber.com/Knowledgebase/Article/View/292/21/contact-viber-support

My iphone 5 power button does not respond do you think they will exchange it for a new one?

help do you think they will exchannge it?

For the second time: Take it in for evaluation. Maybe they will: maybe they wont replace it. Only they can determine that after examining the phone. Endless redudant and circular questions will NOT solve your problem.

My Mac does not respond during login

I am using OS 10.5.2
My iMac does not respond during login. After the desktop and dock are shown, the ball (cursor) keep rotating. I can do nothing except moving the cursor. All application including finder do not respond. Is there any solution?
Thank you very much.

Hi. Try doing a safe boot. Press the Shift button while turning on the computer. If you encounter the same issue, boot from the install disk (insert the disk that came with your computer and boot your computer while holding the C key) and repair the disk and disk permissions. Hope this helps

Iphone 4 home button does not respond, resetting fails to resolve issue

the home button does not respond. i tried putting phone to sleep and waking up with home button (which worked, but then the home button does not return the screen to home page), a hard reboot with the home and power buttons, and finally a reset to factory settings and then synching again to my computer. the problem persists.

Bring it in for replacement.

Myipod touch does not resond to touch I have shut down and restored same thing

My ipod does not respond to touch commands, I have restarted and restored and it is still the same

Try restoring to factory defaults/new iPod if you have not yet done that. If restoring to factory defaults/new iPod does not solve the problem you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Node id does not exist for the current application server id on forms

Hi,
We have a Two node RAC setup on which Oracle e-business suite R12.0.6 is setup
We have CP and DB on two RAC nodes and Forms and Web on two separate server(non-RAC)
while opening oracle forms we are getting" Node id does not exist for the current application server id "
on checking Concurrent manager logfile we founf no error, we matched Application Server id from DBC file of all the 4 nodes with application table
Fnd_nodes... which matches ( there is no mismatch of application server id) .
We have also tried commenting the application server id in dbc file and executed adgendbc.sh to regenarate dbc file but we are facing the same issue.
Also tried to clear setup with fnd_conc_clone.clean setup and again executing autoconfig on db and application tier but no result yet.
Can some one guide as to which file has this message "Node id does not exist for the current application server id "
and what could be the reason for this.
Help is appreciated.
Regards,
Milan

I already tried the mentioned metalink note id but it did not work.What did you try exactly?
Can u help out as from where am i getting the message "Node id does not exist for the current application server id" It is already mentioned in the doc referenced above -- From the dbc file under $FND_SECURE directory.
i mean from which file does the above message comes.Please clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]), run AutoConfig on the database tier then on the application tier and check then.
Thanks,
Hussein

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

Ralph, help! (with "does not respond" message)

My mom said you were the go-to guy on this issue. We have been using iChat AV for video conferencing for about 6 months. Then I switched ISPs, from a cable modem to DSL. Have not been able to make it work since -- we get a "does not respond" message.
Where to begin? The router is the same; the internal firewall is off. Could it be something to do with the new modem, or the new isp? And I saw a recent post here about the November security update as well, so I am wondering if it's actually that.
Thanks in advance.
Juliette
iMac G5 Mac OS X (10.4.2)

Hi Juliette,
As Defcom says, if the modem can route and is not set to Bridge mode (if it can be) then you will need to open Ports.
If you have UPnP then use that as iChat can use this method.
Use Port Triggering if you have mutliple computers and no UPnP. Use Port Forwarding for links to one computer or router.
Only have one DHCP server on your network
Do not use Port Forwarding or Port Triggering twice (Or combo of them)
There is this on the Portforward.com site about Port Triggering for one version of a B90
http://portforward.com/english/routers/port_triggering/Westell/BellSouthB90-2200 30-04/iChat.htm
I would use this for Pics only as the info relies on the App this site promotes which is windows only and the details are wrong after that.
Local port 5678 need to trigger Global port 5060
Local port 5060 needs to trigger Global ports 16384-16403
Local 5190 Triggers 5910
Local 5222 Triggers 5220-5223 (jabber stuff)
Some Jabber logins are on port 5223 so
Local port 5223 triggers 5220-5222 if needed.
Ralph
Ralph

Problems with Tomcat Server : Does not respond (Sometimes) - Plz Need Help

I have a web application running on Tomcat 4.1.31. (SUN/Solaris)
Clients access through iPlanet Web Proxy (SUN/Solaris).
Theres a class that build a generic form (it return html codes) then it's affected in the JSP page :
MyClass class = new MyClass();
<%= class.getHtmlCode() %>
the size of the form is variable (100Ko to 1,5Mo)
When i m using the proxy, sometimes the server does not respond when he do the affectation <%= class.getHtmlCode() %>.
If i call the page without proxy it work.
The problem seem not depending of the size of the form. Without proxy it always work. And with proxy sometimes the server does not work.
Please need help

Originally Posted by scum
Hey All,
Need some help with ZDM7 PXE preboot services.
Currently running a netware 6.5 server in VLAN1
PXE client sitting in VLAN2.
DHCP Server is running on VLAN3
IPHelper is running
DTS.ini, PDHCP.ini and TFTP.ini are unmodified.
I have had networks put an IPHelper in place and my client successfully picks up an IP address. The screen displays the "BOOT SERVER IP" correctly and the clients IP details are correct.
I watch the top of the screen where the Timeout counts down and eventually gives this error.
"Error: The server did not respond as requested in time
ZENworks shutting down...
Press any key to continue..."
This happens on every machine i have tested. If i hold down the Ctrl+Alt keys, then the imaging menu appears, i can select maintenance and the client will pull down the initrd, etc.. fine.
if i disable the IPHelper, move the client to the same VLAN as the server, then the whole process works perfectly.
not sure where to go from here.
help please ;)
leon
Hi Leon,
If you are getting the ZENworks menu when holding down the Ctrl-Alt keys, PXE/PDHCP seems to be doing the right thing. Routing issues also don't seem the case as you can pull down the first PXE boot files....
The server running PXE, I assume it also runs the TFTP and Imaging services?
These services are also running a recent version of Zen 7 (IR3/IR4)? A little more info on these components and what server they are on would be good :)
Cheers,
Willem

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either.

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either. Anyone have an idea as to what to do?

I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

IPod does not respond at all when plugged in

Alright, this topic is for people who have had this exact problem only. I don't want to get this confused with other problems and have people trying to help troubleshoot multiple problems and get things mixed up. Here's the problem.
After updating to v1.1.2 of the iPod software, the iPod does not respond when plugged in. The iPod still works fine when not plugged in. It plays music and both the standard and shuffle play modes work accordingly. The problem is when you plug the iPod in, it doesn't charge and it doesn't mount. The orange blinking light does not come on. While plugged in, it works the same way as it does when you're listening to music with it. It's as if the iPod's USB connector is dead. Here is my original post and description of the problem.
Alright, so here's my story. I bought my 512MB Shuffle in April. It has worked perfectly fine since I got it. Last night, I updated to v1.1.2 of the iPod software, clicked no when it asked if I wanted to restart, added some songs to the iPod, then restarted. As of this morning, I went to listen to some music while out for a bike ride, and I was greeted with the red battery light. I thought it was a bit odd since I had left it plugged in overnight. I figured, what the heck, I'll just plug it in and let it charge when I get back. When I got back, I plugged it into my PC and left for a while. I came back later and went to grab my Shuffle and I noticed it was cold, which was unusual after charging for a couple hours. I plugged it back in, a bit frustrated, and it never came up in Windows. I looked at the iPod plugged into the back of my PC (a high powered USB port) and sure enough, no orange light. No lights at all. I can still slide the switch to one of the play modes (standard play or shuffle) and play music for a couple seconds before it stops and says the battery's dead again. It works.. I mean it turns on and plays music, it's just not charging or mounting when I plug it in. I tried multiple computers and USB ports, none of which worked. I would really like some help with this considering it IS my only source of portable music and I'm not going to go pay $50 to talk to tech support or have it sent in for repairs. That's half of what it's worth.
I've tried uninstalling all iTunes/iPod related software from the PC I normally use it on and reinstalling it. That didn't work. I also tried uninstalling again and installing the last known working version of the iPod software, still no results. The only thing I havn't tried is giving it a good beating... Not that I would. Anyways, I hope there's a solution to this that doesn't involve buying a new one.
Here's a rundown of the computers I tested it with.
500MHZ G4 Cube (384MB RAM/Mac OSX Tiger)
400MHZ G3 iMac (384MB RAM/Mac OSX Tiger)
4.2GHZ AMD 64-Bit running Windows XP Service Pack 2 (my PC)
515MHZ Dell running Windows 2000 (256MB RAM)
UPDATE: The BIOS won't recognize the iPod, so it has nothing to do with my computer. Somehow, installing v1.1.2 of the iPod software made it so the iPod itself has USB problems. The iPod works to the extent of playing music and showing the battery charge level. I get no response at all when I plug it in, from the computer or the iPod.
I'm going to have to agree with Philip Harhay on this one. The original 10GB iPod I bought 3 years ago came with a full one-year warranty, no extra charges. I am disappointed to see the Shuffle only coming with a three-month warranty.
------------------------------------------------------------------

Help! I just purchase an iPod Shuffle for my son's birthday and I cannot get the darn thing to show up on my iMac G5. I am running OS 10.4.2 and I have downloaded the latest iPod and iTunes software. When I try to restore my iPod to the factory settings it tells me to plug the iPod into the computer, but it is plugged in. I have tried different USB ports, too. I'm running out of ideas and so is the trouble shooting Apple site. I was hoping someone out there might have some ideas.
It showed up at first and I transferred a few songs from the iTunes to the iPod but I couldn't get them to play, so I plugged it back into the USB and the icon never came up.

AD does not respond to DNS adn DHCP server anymore and doesnot accept new computers

Similar Messages

Maybe you are looking for