Ad-hoc Query & Ad-hoc Query Designer
Hi Experts,
Please present some information about following question:
1) Ad-hoc Query and Ad-hoc Query Designer.
2) Under which senario we go for Ad-hoc Query instead of normal query.
3) How it will be effective in reporting.
4) How to get into Ad-hoc Query Designer, coz i couldn't find anything in the Bex
points vl be rewarded.thank you.
Regards,
Vasanth.D
Hi,
Check out the following link:
http://help.sap.com/saphelp_nw70/helpdata/en/08/965b423be8de54e10000000a155106/frameset.htm
Regards,
Kishore
Similar Messages
-
How to disable Wizard in Ad-hoc Query Designer
Hi everybody,
I am using the Bex Ad-hoc Query Designer in a web application. The users should be able to define their own queries, but just for one info provider. I selected the info provider in the properties of the ad-hoc query designer in the web template.
Now the users are able to create queries for all info providers with the wizard.
Is it possible to disable the wizard or to disable all buttons at the top of the ad-hoc query designer.
Thanks in advance,
JoergThis can be done using the security for the Infoprovider, provide the users access to create queries only for that Infoprovider.
-
Hi,
In which scenarios we use Ad hoc Query Desinger..can you give me an example....I know there are few restrictions when compared to Query designer.....hi,
Ad-Hoc Query designer
Creating a query with the Ad-Hoc query designer is much on the same lines as creating a query with the Bex Query Deisgner. You need to choose the chars and key figures and place them in rows, columns, free chars or filter areas. You can set the InfoObject properties and also create exceptions and conditions.
The Adhoc Query Designer is a web item and can be made available in web reports
See this link for more info and some important restrictions when using the Ad-Hoc Query Designer:
http://help.sap.com/saphelp_nw04/helpdata/en/1f/03223c5f00612be10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/08/965b423be8de54e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b4/8a6b3ca681207ee10000000a11405a/frameset.htm
Shreya -
Ad-hoc Query Designer: Create Exception
Hi there,
somehow, my Ad-hoc Query designer is going crazy or something. I don't know whether it is a technical error.... hope you can help me.
When I create an exception, if I don't set the standard operator AND all characteristics to "All" the exception is displayed only for the results.
When I set all these operators to "All", then the results are also marked in the respective colours. However, I only want to mark everything but the results, but if I choose for this option, only the overall result is displayed.
Can you help me?
Thanks,
SabineHi Sabine,
I think I did not fully get what your requirement is, please elaborate on what you want to be displayed. Something general
1. in tab "exception values" you can specify the key figures on which the exceptions are to be applied and assign value ranges to different colors / levels
2. in tab "validity area of exception" you can specify
a) to apply the exception on all or totals only (choicebox), this setting is valid for all characteristics not mentioned in the field below
b) to apply the exception on everything, totals, everything but totals, fixed value, hierarchy level corresponding to a certain characteristic
Best regards,
Björn -
Change query in Ad-hoc Query Designer
Hello All,
We are using Ad-hoc Query Designer for users to run their reports. now we want them to do their modifications there itself and save as the query. But SAVE and SAVE AS buttons are Inactive.
One more problem with using Ad-hoc Query Designer is when we run reports and want to save the Bookmark, this function is not working (though the Bookmark button is Active).
It would be helpful if you could pinpoint the settings/configurations that I would need to check to get above two things working.
Thanks and Best regards
Pratap SoneIf you want users to enter the data , you can create a transactional cube andmake the query input ready .
-
Ad Hoc Query Designer - Web Application
Hello,
I have created a Web application that has the 'Ad-Hoc Query Designer' item.
When I go to create a new query I don't have the option (or I can't find it) to use any variables.
Like in Analyzer I can run a query and it will ask me the values for the variables I have embedded in the query.
How do I make that work using the 'Ad-Hoc Query Designer'
Also I have problems with the application timing out, what timeout variable needs to be adjusted?
Thanks,
NickYou have to run the Launch query in browser from the query designer window, it will be the second icon from the top. This will open up the query in a browser and if the query has a selection screen the browser will launch the selection screen.
For the application timing out, it is a parameter that has to be set in the instance profile of the BI application server. You can ask your basis team to increase the parameter 'rdisp/j2eetimeout'.
Hope this helps
EmJay
Assign points if helpful -
Ad-hoc query designer support end?
Hi Colleagues,
We need use Web Query Designer (Ad-hoc Query Designer) tool at BI 7.0 version.
So, we've heard that SAP leaves mantain Web Query Designer tool, could you confirm us it? If it's true which other choice you offer us?
Regards
Raul.Hi Sabine,
I think I did not fully get what your requirement is, please elaborate on what you want to be displayed. Something general
1. in tab "exception values" you can specify the key figures on which the exceptions are to be applied and assign value ranges to different colors / levels
2. in tab "validity area of exception" you can specify
a) to apply the exception on all or totals only (choicebox), this setting is valid for all characteristics not mentioned in the field below
b) to apply the exception on everything, totals, everything but totals, fixed value, hierarchy level corresponding to a certain characteristic
Best regards,
Björn -
wat is adhoc query and how to make adhoc query.
Hi Viswanath,
Ad hoc query means dynamic query ( on demand basis)where your reporting needs are dynamic.
Check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/08/965b423be8de54e10000000a155106/frameset.htm
Also check:
Ad hoc Query Designer
Ad-Hoc Query Designer
Ad-hoc Query's
assign points if useful ***
Thanks,
Raj -
How to get the standard Menu of Query Designer into Web Template
Hi Experts,
is there a way on how to put the standard menu within Bex Query Designer (after executing a Query with the Query Designer you get into ad-hoc reporting with a menu including several functions like print, show as..., properties, etc) into an individual Bex Web Template?
Copy & Paste source code will not work I guess because of several javascript functions I don't have access to.
Thanks & Best regards
TobiasBEx queries are displayed on the web using standard web template 0ANALYSIS_PATTERN or some customized version base don your implementation.
You can either include the 0ANALYSIS_Pattern web template in your custom template or use Save as to create a new template with 0ANALYSIS_Pattern AS THE STARTING POINT. -
Adhoc query designer in BI 7.0
Hello BI Experts,
How and where to use the Adhoc query designer in BI 7.0 Web application designer. Is this web item available. what is the new name for it.
Please help.
Thanks in advance
BWerHi BWer,
The Ad Hoc Query Designer Web item is no longer available in the BI 7.0 runtime, only with the BI 3.x tools. The BEx Web Analyzer is the tool now used - you can create new query views from an existing query or directly against an InfoProvider.
Regards,
Katie Beavers
SAP NetWeaver Product Management -
BEx Query Designer and Exceptions
I have a simple enough task. I was tasked, with marking items on a query with an exception, however the value is not static. I have a column marked hours, and five columns for each day of the week. The current day with data should yield an exception if the current day has less hours the the calculated hours column. So my first approach was to create a formula where I evaluate both the hours calculated from the query and the current day. I called this field fday1. I created an exception stating that if fday1 = 1 then to mark the field Bad3. but I want the affected structure to be the Actual Day such my column days are: Day 1 (current date), Day 2 (current date + 1) etc... but when I visit the query (ie, adhoc query) only the formula field fday1 has the exception day triggered. In the exceptions list I define the keyfigure fDay1 (time of evaluation [before list calculation]) Under the display tab I have exception affects data cells for the following structure elements: Day 1 (current date).
like If I execute this query through the portal the exception shows up correctly on the proper field. if I execute the query through the adhoc (BEx Ad Hoc Analysis) view, then the wrong field has the exception.
any thoughts on a better way to approach this query?Nobody has a solution in order to highlight the whole row (characteristic and key figures) for a value of a key figure ?
With WAD or Query Designer, I'm trying to highlight a line with an exception on a key figure but it apparently colors only key figures.
For example i would have entire colored rows for negative key figure :
field1:a field2:x field3:e key_figure:1
field1:b field2:x field3:e key_figure:7
field1:b field2:y field3:e key_figure:-5
field1:d field2:z field3:j key_figure:1
I can use WAD or Query Designer but not Visual Composer or Report Designer...
Thanks for help. -
Query potal limits the Row in Query designer
Hi All,
When i am executing the query in Query designer 7 it is showing as 4 or 5 columns only. We need to show the complete report.Everytime we are clicking on next page and going forward. Because of this reason we are going for WAD.
Is there any alternate solution where we can show the maximum number of row in the first time execution itself??
Thanks in Advance
Regards
SathiyaHi Sathiya,
this can be done by enhancing the standard template. Check: [How to Enhance SAP BEx Web Analyzer (0ANALYSIS_PATTERN|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/200d6cb6-080e-2b10-84a5-b96723ad8f18]). This link will give you information howto...
Additional:
http://help.sap.com/saphelp_nw04s/helpdata/en/f9/7f12403dbedd5fe10000000a155106/frameset.htm
Go in you copy of 0ANALYSIS_PATTERN described in how to and help.sap link to WAD and modify the analysis web item. Paramter: BLOCK_COLUMNS_SIZE
http://help.sap.com/saphelp_nw04s/helpdata/en/76/489d39d342de00e10000000a11402f/frameset.htm
After that go to SPRO>SAP Netweaver>Business Intelligence>Settings for Reporting and Analysis>BEx Web>Set Standard Web Templates>Ad Hoc Analysis.
You have to restart the J2EE Engine that you changes will overwrite the existing ones...
Regards
Andreas -
Providing access to Variables in the Query Designer
Greetings experts and fellow consultants,
I have a simple question, did a search and did not come up with much of an answer. Currently, we have a system with a role for BI Power Users in order for them to create ad-hoc queries. An issue we found was that these power users were not able to view variables within the query designer:
Under the "Characteristic Restrictions" pane, the variables show up as (Display Not Allowed) under their associated InfoObjects. This is presenting an issue (understandably) and I would like to provide access for these power users to see the variables.
My question is, are there any circumstances where I would want to restrict which variables are shown to the power user? Right now, I plan to allow display access to all variables (via S_RS_COMP+S_RS_COMP1 for those informed on Security). Just trying to brainstorm on whether there might be scenerios where I would want to hide certain variables.
Many thanks to all opinions, as always!Suresh, in my above post I knew how to enable this. I just wanted to know in regards to security whether there were any exposures. Apparently, I could not find any and the changes went through without issue. The way you enable display of variables in the Query Designer is the following:
S_RS_COMP:
RSINFOAREA '*'
RSINFOCUBE '*'
RSZCOMPTP 'VAR'
ACTVT '03'
S_RS_COMP1:
RSZCOMPTP 'VAR'
RSZCOMPID '*'
RSZOWNER '*'
ACTVT '03'
Hope this helps. Of course, adjust the field values are you see fit but the minimum requirement is that RSZCOMOPTP 'VAR' (Variables) and ACTVT '03' (Display). -
Hi All,
Is adhoc query designer (Portal) supports 7.3 version? we have 3.x version
Thanks in advance
Regards,
RaviHi,
Ad-hoc query designer is removed (BOBJ WebI fulfills this need).
The use of WebI can be through LiveOffice, BICS, OLAP & SQL Universes, QaaWs and Data Federator for accelerated (BWA) or non-accelerated ad-hoc querying (can also be used for any 7.x system)
Thanks,
Venkat -
Future of BEx Query and BEx Query Designer
Folks, I understand SAP's future reporting tools is BO suite. All of us need to move to the new tools which are better or more reliable in 2010. Meanwhile our customers are reluctant to use BEx tools for any new development. Being on the techi side I dont see how BEx Query will be replaced by Voyager or Polestar or WebI or Crystal. I just need to report on my multiprovider without a universe layer. Have any of you experts come across documentation that layed out future of BEx tools explaining the end of support period? I have see roadmaps for tool availability but no dates for end of support.
Thanks in advance.AFAIK,
Bex Query designer and BEx query will continue... Polestar might be proposed as an alternative for BEx but then it is meant for ad-hoc analysis ... but BEx query and Query designer have specific query requirements also...
Voyager etc will start coming in...
Maybe you are looking for
-
Problem with Photoshop CS5. Memory and Harddisk spaces
Just got CS5 Master Suite. Whenever I open photoshop it takes a ton of memory 1 gig +. When I open files it takes up more and more until it takes up all my memory and hard disk space. I open a simple multi layered file that is 25 megs in size to work
-
Previous version of AR on a Mac would open the Finder window when "Save As" was selected. Now, only a list of the most recently opened folders and the Desktop are presented as candidate locations to file the .pdf. A bit of a pain to save to Deskto
-
Hi!! :-) Im currently trying to access some Postgres-database from an Enterprise-App running inside Sun App Server 9... Some of th tables have a primary-key-field with type SERIAL, so Postgres creates the value for those fields!! Now: How can i achie
-
Installing new iTunes now computer will not get past apple start up
Help
-
Still having Problems with yamaha USB UX16 midi device can anyone help??
I have setup drivers on my computer which have installed successfully. In logic I have setup environment so Physical input sequenser and keyboard are all connected up in Click and Ports layer. When I am trying to play keyboard I still have no input o