Adapter file receiver - file with fix length record
Hi everybody,
In the file adapter receiver, I want to create a fixed length record file .
Each record need to have the same size.
How is it possible, because I have a file which contains variable legnth depending of the lenght of message?
exemple:
<mess>
<row>1234567</row>
<row>123456789A</row>
</mess>
give the file
1234567<CR>
123456789A<CR>
<CR> means carriage return
and I want a file like
1234567 <CR>
123456789A<CR>
with the same lenth of record (10 in the example).
Can anyone help me, ,please?
Kind regards.
E. Koralewski
Hi Eric,
Create a value user defined function with one input argument a and name it is inputpad. Then add the following code:
Imports: java.*;
while (a.length()<Integer.parseInt("10"))
a= a +" " ;
return String;
Here I am assuming your fixed length for the field is 10. If it is more or less then change the number. Now in your mapping do all your logic and then in the final add this like:
input ---> your logic --> inputpad udf --> target.
Regards,
---Satish
Similar Messages
-
Send a flat file with fixed lengths to XI 3.0 using a Central File Adapter?
Hello,
I'm wondering if someone have experience setting up conversion for different record structures. The example shown,
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter,
(in a greate way) only picture one kind of structure.
How should it be done if the file would contain
10Mat1
20100PCS
The first record structure has columns
ID(2),Material(10)
The second redcord structure has columns
ID(2),Quantity(3), Unit of messure (3)
Brgds
Kalle
Message was edited by: Karl BergstromThe configuration would be like follows:
Content Conversion Parameters:
Document Name: <your message type name>
Document Namespace: <your message type namespace>
Document Offset: <leave empty>
Recordset Name: <any name>
Recordset Namespace: <leave empty>
Recordset Structure: row1,,row2,
Recordset Sequence: any
Recordsets per Message: *
Key Field Name: ID
Key Field Type: String
Parameters for Recordset Structures:
row1.fieldNames ID,Material
row1.fieldFixedLengths 2,10
row1.keyFieldValue 10
row2.fieldNames ID,Quantity,UOM
row2.fieldFixedLengths 2,3,3
row2.keyFieldValue 20
Instead of row1 and row2 you can choose any name.
Regards
Stefan -
Flat file with fixed lengths to XI 3.0 using a Central File Adapter---Error
Hi
According to the following link
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
In Adapter Monitor I got the following error,
In sender Adapter,
Last message processing started 23:47:35 2008-10-25, Error: Conversion of complete file content to XML format failed around position 0 with java.lang.Exception: ERROR converting document line no. 1 according to structure 'Substr':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this
last retry interval started 23:47:35 2008-10-25
length 15,000 secs
some one help me out ?
Thanks
Ramfrom the blog you referenced -
<u> /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
<b>goto step 4</b>
<u>additional parameters</u>
add as the last entry
<recordset structure>.lastFieldsOptional Yes
e.g.,
Substr.lastFieldsOptional Yes -
Interface output file : tab limited vs flat file with fixed length
hey guys,
any idea on difference b/w to file type : flat file with fixed length or tab limited file
thanksTab Delimited:
Two Field are seperated by a TAB
eg. SANJAY SINGH
First field is First Name and Second is Sir Name.
Nth field will be after N -1 tab
Fixed Length:
Every field has a fixed starting position and length
eg. SANJAY SINGH
Here First field start from Position 1 and has lenght 10 and 2nd field start from 11th postion and has lenght 10.
Fixed Length -> The lenght of each field is fixed, while in tab delimited the lenght of field is not fixed but we know it ends when the Seperatot (Tab) is encountered. -
How to create flat file with fixed lenght records
I need help to export an Oracle table to a flat file with fixed lenght and without columns separator.
the fixed length is the more important demand.
My table have 50 columns with varchar, date and number .
Date and number columns may be empty, null o with values.
Thanks a lot for any help.
[email protected]Hi,
You can use this trick:
SQL>desc t
Name Null? Type
NAME VARCHAR2(20)
SEX VARCHAR2(1)
SQL>SELECT LENGTH(LPAD(NAME,20,' ')||LPAD(SEX,1,' ')), LPAD(NAME,20,' ')||LPAD(SEX,1,' ') FROM T;
LENGTH(LPAD(NAME,20,'')||LPAD(SEX,1,'')) LPAD(NAME,20,'')||LPA
21 aF
21 BM
21 CF
21 DM
4 rows selected.
SQL>SELECT * FROM t;
NAME S
a F
B M
C F
D M
4 rows selected.Regards -
I have an input file, which is fixed length format. I need to configure the Sender File Adapter for a fixe length file(i.e each field length is available and I need to mention that in my sender file Adapter)
Can anyone suggest an appropriate blog, that explains my scenario.
(I searched this web and it keep on hanging)Hi Naveen
check these links
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
for sender conversion (check the sub links in this topic)
http://help.sap.com/saphelp_nw04/helpdata/en/0b/9a50465ccf84479e39a6d50c90fb3f/frameset.htm
and my reply to your previous post for idoc to flat file.
Regerds
Vishnu -
How to process file with fixed length using MFL in OSB
Hi Team,
I need to translate this file using MFL. its fixed lenght[each line is having 81 chars] file in below format.
Please help me to process this in OSB using MFL.
==================================================================
START
[email protected]
[email protected]
END
Subject : CALIFORNIA STEEL IND Renege #00424523 Hse580 CTH580
BODY:
User_ID: LARRY014
Xpd2 Hse/Customer # : 580/1196310
Xpd Order Number: 580094624
Customer E-Mail: [email protected]
Customer E-Mail 2:[email protected]
Customer Phone : 9093506458
Dear Salesperson,
gexprosupply.com Order # : 00424523
gexprosupply.com User ID : LARRY014
Customer CALIFORNIA STEEL IND has entered order 00424523
through gexprosupply.com.
THIS ORDER HAS RENEGED for the following reason(S):
I. ORDER LEVEL
NOTE SEGMENTS FOUND IN INPUT - SENTRY
CDF REQUIRED CUSTOMER - ORDER RENEGED
II. ITEM/LINE LEVEL
LINE # ECOM LINE NAED QTY STATUS ALLOW SUBS
Please resolve the renege and release the order in Sentry
01 as soon as possible. Thank you.
EMAIL-END
==================================================================
Thanks
Reddy
Edited by: 913248 on Feb 8, 2012 2:07 PM
Edited by: 913248 on Feb 8, 2012 2:08 PMHi Prabu,
thanks a lor fro you replay.......
the above file is having mail content[from id, to id, subject and body] i need to read this file using OSB and need to sent to the respective email id.
the file format is :
it will have
0- its a fixed length in each line [81 chars]
1--"START" tag....starting of the email
2--after START, the email ID is "FROM" email ID
3-after "FROM" emailid, 3rd line onwards....will have "TO email IDs
4-"END"---end of the email IDs
5- "Subject " ...will have subject of the email
6-"BODY".... the email body will start in this tag
7-"EMAIL-END"..end of the email....
so my requirement is ..i need to read above file in OSB and send notification emai.
Thanks
Reddy -
How to generate blank spaces at end of the record in a flat file with fixed
Hi,
I am generating a flat file with fixed length.
In my ABAP program, i am able to see the spaces at the end of the recors in debug but when download to applicaiton server i am not able to see those spaces.
How can i generate blank spaces at the end of the record in a flat file?
Please update
Thank youHow are you downloading the file? And, How are you looking at the file on the application server?
Can you provide snippets of your code?
Cheers
John -
How to load unicode data files with fixed records lengths?
Hi!
To load unicode data files with fixed records lengths (in terms of charachters and not of bytes!) using SQL*Loader manually, I found two ways:
Alternative 1: one record per row
SQL*Loader control file example (without POSITION, since POSITION always refers to bytes!)<br>
LOAD DATA
CHARACTERSET UTF8
LENGTH SEMANTICS CHAR
INFILE unicode.dat
INTO TABLE STG_UNICODE
TRUNCATE
A CHAR(2) ,
B CHAR(6) ,
C CHAR(2) ,
D CHAR(1) ,
E CHAR(4)
) Datafile:
001111112234444
01NormalDExZWEI
02ÄÜÖßêÊûÛxöööö
03ÄÜÖßêÊûÛxöööö
04üüüüüüÖÄxµôÔµ Alternative2: variable length records
LOAD DATA
CHARACTERSET UTF8
LENGTH SEMANTICS CHAR
INFILE unicode_var.dat "VAR 4"
INTO TABLE STG_UNICODE
TRUNCATE
A CHAR(2) ,
B CHAR(6) ,
C CHAR(2) ,
D CHAR(1) ,
E CHAR(4)
) Datafile:
001501NormalDExZWEI002702ÄÜÖßêÊûÛxöööö002604üuüüüüÖÄxµôÔµ Problems
Implementing these two alternatives in OWB, I encounter the following problems:
* How to specify LENGTH SEMANTICS CHAR?
* How to suppress the POSITION definition?
* How to define a flat file with variable length and how to specify the number of bytes containing the length definition?
Or is there another way that can be implemented using OWB?
Any help is appreciated!
Thanks,
Carsten.Hi Carsten
If you need to support the LENGTH SEMANTICS CHAR clause in an external table then one option is to use the unbound external table and capture the access parameters manually. To create an unbound external table you can skip the selection of a base file in the external table wizard. Then when the external table is edited you will get an Access Parameters tab where you can define the parameters. In 11gR2 the File to Oracle external table can also add this clause via an option.
Cheers
David -
Dealing with Fixed Length formats both at sender and receiver side
Hi all,
I have file -- File with fixed lenght formats.
Source system will generate a text file with fixed lenght and target also needs the same file with same format.
Then we have an idea to implement the interface with out IR Development .this is fine upto now.
But now the problem is we are receiving more fields from source than we require for target process. we are not using at receiver side.
So receiving system needs only few required fields from the source file.
From soucre
Ex: Source.... DocNum Invoice No Bill date Bill amount vendor code
We require at target
Ex: Target..... DocNum Bill Date Vendor code
Please suggest me
RegardsHi,
>>The source file content conversion is simple...In the target when you specify the target field names just leave out the ones you dont need...
from source we wil read all the fields, this is fine and in the target how to mention the field positions
Here all fields will come into picture, we cant mention the positions at receiver
Source side Ex: Docnum InvoiceNo Billdate Bill Amt Vendor
Fixed lenghts are 10 20 10 10 20
Target Expects Ex: Docnum BillDate Vendor
10 10 20
in receiver side if you mention fixed lenghts like 10 10 20 means it may read docnum, Invoiceno, BillDate
It wont ignore InvoiceNo field in this case
Regards -
How to load a flat file with lot of records
Hi,
I am trying to load a flat file with hundreds of records into an apps table. when i create the process and deploy it onto the console it asks for an input in an html form. why does it ask for an input when i have specified the input file directory in my process? is there any way around tis where in it just reads all the records from the flat file directly??is custom queues anyway related to what I am about to do?any documents on this process will be greatly appreciated.If any one can help me on this it will be great. thank you guys....After deploying it, do you see if it is active and the status is on from the BPEL console BPEL Process tab? It should not come up to ask for input unless you are clicking it from the Dashboard tab. Do not click it from the Dashboard. Instead you should put some files into the input driectory. Wait few seconds you should see the instances of the BPEL process is created and start to process the files asynchrously.
-
Exporting fixed length records in a .txt format
Post Author: jnesbitt
CA Forum: Crystal Reports
How can I configure Crystal Report detail records so they can be exported in a fixed legth .txt record format?
Using Crystal Reports 9.2.3.884Post Author: SKodidine
CA Forum: Crystal Reports
I have created CR detail records fixed length of 400 and then exported them to text.
This is how I did it, there might be other ways and I even though I created them in CR XI, it should be similar in CR 9.
Let us assume that your fixed length record needs to be 100 bytes long. Create a formula with all the fields concatenated, that you would otherwise display in the details section. Create a second formula that will use the space function to put trailing spaces.
Here is an example for a fixed length record of 400:
Here are my two fields in my record that have been concatenated.
Formula 1: RecordType & totext(BatchNumber,"0000000");
Formula 2: {@Formula1} & space(400 - length({@Formula1})); -
Is it possible to display a waveform with fixed length and fixed starting point?
Hi,
I am using DAQ assitant to acquire voltage and current measurment of my device. The voltage is a pure sine wave and current is a periodic waveform with phase difference and distortion. I use waveform chart to display the waveform of voltage and current waveform in seperate charts and they work fine.But the waveforms look like moving to the right all the time, in another way ,the phase is always shifting. Now i want to display the waveforms of both with fixed length (say 2 cycle) and also in a same chart. Apart from that, i also want to display the voltage waveform starting form 0 degree (a fixed point )rather than moving all the time. In this case, i can observe the angle difference between voltage and current. Is there any method to achieve this purpose?
Many Thanks,
HaoHao,
first of all, you are using a chart which has three options for updates if the chart is "full":
Strip chart (default)
Scope chart
Sweep chart
These are called "update mode". Test the modes yourself.
Also you have to know that you will not likely have an integer number of periods of your signal in the display of the chart. Therefore, a continuous signal will "move" the graph from update to update.
You can implement some algorithm to discard data to maintain a static "trigger" level for display, but as stated, it will leave gaps in the signal. These gaps are not a concern unless you use the displayed signal for analysis (e.g. FFT).
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
File Adapter - Multiple fixed length records in the same file
Hi
I am developing a BPEL process that "Sync Read" a file. The file is a flat file comprising of multiple records and each record is of fixed length. There are no delimiters in the file. I got the xsd associated to this flat file and each element is defined with some fixed length and starting position. The xsd is valid.
When I execute the BPEL Process, I get the following error - I verified the file structure and the position of the fields map correctly. Remember this is not an xml file just a plain text file. Can BPEL process such files or should I always provide an "xml" file?
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="detail"><detail>Start of root element expected.</detail></part><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'SynchRead' failed due to: Error while translating. Translation exception. Error occured while translating content from file /tmp/inputDir/VDA1.txt ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="code"><code>null</code></part></bindingFault></bpelFault>
Thanks
Shanthihi,
see you actually read a XML file and when you read it it is verified by a XSD the location of the XSD is in the XML file it self,
<tns:abc xmlns:tns="http://xmlns.int.aaa.co.uk/xmlns/BPELXXX"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.int.aaa.co.uk/xmlns/BPELXXX *c:/aaa/bbb/ccc/XSD/abc.xsd*">
if the file you are reading is valid then it is read, other wise not, I am not sure about sys read, but in empty BPEL process, if the XML is not validated with the XSD, then the XML is not read, I am still not sure what is the meaning of flat file, are you doing a opaque read?
Yatan -
Issue with Xi File Receiver "Content Conversion" fixed length and kanji
I need to create a fixed length file for a customer that has kanji (SJIS) characters in it. The issue is when the length of the value is less than the fixed length. It is padding out with spaces, but it is putting 2 bytes per space instead of one (But it seems to have counted the padding in characters...).
.fieldFixedLengths: 8,6,40,40
.fixedLengthTooShortHandling: Cut
.fieldNames: date,time,name1,name2
Receiver, please don't answer for sender.
File AdapterPaul,
Can you please tell what is coming in the output file if the values are:
date: 062309
time: 2240
name1: hello
name2: hello2
When you put space here and if it is not showing correctly just to interpret you can use S which will stand for space.
---Satish
Maybe you are looking for
-
How do I remove my updated apps out of the App Store update page on my iPhone 5?
If I open the App Store from my iPhone 5 - there is a queue of EVERY SINGLE APP (which I have already downloaded and updated) and the queue is getting longer by the day as it dates back to September 21. I've owned and used every iPhone since the Day
-
I have three table StudMaster,StudEnroll and StudAttendance; design StudMaster StudId Gender StudName 2 1 Tushar 5 1 rakesh 6 1
-
SGTXT field not saved in UD posting doc
Dear QM guys I want to capture Reason for rejection in GR. We are posting rejection in "To Reserves" field in UD posting screen. Now i am trying to use "Document" near by "To reserves" for capturing Reason. I have changed my screen modification thru
-
Hi, Experts When i am taking a backup through DB13 system throwing a error " BR0051I BRBACKUP 7.00 (24) BR0055I Start of database backup: bdyfmpzk.afd 2008-06-25 20.45.44 BR0484I BRBACKUP log file: D:\oracle\SSD\sapbackup\bdyfmpzk.afd BR0252W Functio
-
InDesign CC Step and repeat user friendliness
With the Step and Repeat function in InDesign: Currently when you enter a value in any of the three boxes (count/vertical/horizontal) and the value results in the objects not fitting on the page, you'll receive immediate feedback in the form of a pop