SGTXT field not saved in UD posting doc

Dear QM guys
I want to capture Reason for rejection in GR. We are posting rejection in "To Reserves" field in UD posting screen.
Now i am trying to use "Document" near by "To reserves" for capturing Reason. I have changed my screen modification
thru module pool SAPMQEVA and made "SGTXT05" field as mandatory. Even though the text which was entered here during
posting not saved and not shown in display of material doc in "Where" tab.
Please help us to solve the issue.
Madhan

Hii,
I think u need to capture reason for the rejection for material . To capture reason u can prefer RR screen rather than UD screen. For this u can activate control indicators of "Doc required" or "Doc required if rejected" in doc confirmation at the MIC's level (QS21).
So, in RR screen when u confirm the particular MIC' s , the system allows u to enter Remarks/ Reason in the short text field. If u want to capture reason u enter reason else put dash in the fields. The same field can also be picked for report preparartion. U can enter text of max 40 CHAR.
with regards

Similar Messages

Not all form's fields not saving

I have created a form from a blank PDF sheet.
I have saved the form and enabled usage rights for Adobe reader.
When I open the form in reader, it indicates I can save the form. If I fill in the form, and save it, it seems to work as intended. When I re-open the file, only 20% of the fields appear. I cannot see the previous data, even if I select the field.
If I save the form in as a text file all of the entered data is saved properly.
Basically the form is not saving ALL of the entered data.
What might be the problem?
Below is a link to the pdf I created:
https://www.dropbox.com/s/49rrmtvl1ltv5lg/License%20Information%20test.pdf

There are unnamed text fields in your table. This is the reason when you re-open the form, no data is remerged back in, because there is no field name to match with. Column cells under the headers,
Power Output:, ERP:, Antenna Height (Meters):, and Emission Designator(s):
all suffer from this problem.
The fix would be to give these table cells names.

Bridge not saving toning/applying post production - like 20K images to tone!!

Hi - Am desperate - have 10 weddings to do post production on and my bridge is acting up.
I am having a bridge isssue - when I apply the toning/cropping/color correction to images and press done it is not saving the work. In addition when I do the work in bridge and then choose save as it just save them as untoned JPGSs. It does not apply the raw conversion or xmp data.
In addition it is only happening in half the images in the folders not all of them. And it's not camera specific it's random.
Any help would be greatly appreciated.
[email protected]

I am having a bridge isssue - when I apply the toning/cropping/color correction to images and press done it is not saving the work. In addition when I do the work in bridge and then choose save as it just save them as untoned JPGSs. It does not apply the raw conversion or xmp data.
Bridge is only a file browser without editing capacities (except the export panel but that has been discontinued in Bridge CC) and reflects the content of your folders. If you make changes in ACR using either selecting via PS or via Bridge any changes should be visible wether you have hit done or save in ACR.
If you have other results, especially random difference it looks like a cache problem to me. So point the Content panel to a problem folder and use menu tools / cache / purge cache for folder and check if this solves your problem.

SRM 7.0 customer fields not saved in shopping cart

Dear experts,
I have created 2 fields using the fields extension in the customizing and set the metadata for them to be displayed. The fields are visible on screen. However when data enteres, this data is not being saved in the Shopping cart document.
Any clues?
Another question, which is a bit techno, is when i have extended the SC screen using the enhancement framework instead of using the standard extension options. i would have thought that by binding these fields to the standard header node with the custom fields as structure would have saved me the job of throwing data and fetching data from the table/bapi. This isn't working either. I reckon the problem will be related to issue #1 above.
Regards
Ali

>
Muhammad Ali Mahmood wrote:
> Dear experts,
>
> I have created 2 fields using the fields extension in the customizing and set the metadata for them to be displayed. The fields are visible on screen. However when data enteres, this data is not being saved in the Shopping cart document.
> Any clues?
Hello Ali,
did you extend both the structure INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF? It should be useful to define a custom structure that contains your fields and append it to both the structure named above. Then re-check if the metadata structure has been enhanced properly (in your case, view /SAPSRM/V_MDF_IC).
Hope this helps,
Matteo
EDIT: I was assuming you were intended to add new fields at item level. If your task is to add fields @ header level, simply substitute HEADER to ITEM in the structure's name.
Edited by: Matteo Montalto on Dec 7, 2009 12:14 PM

Created "Hierarchy Field" not saved in Import Mapping File

Hello experts,
I want to save the mapping created after having imported categories via MDM Import Manager.
Everything works fine as I execute an initial import (In "Map Field" tab, I create a "hierarchy field" based on the three fields "Categorie Name, Categorie Name 2, Category Parent" and mapp the Split Hierarchy field consequently ).
My problem is as I save the Mapping and try to reuse it for a new Categories import, the former "hierarchy field" does not appear anymore. I assume Saving Mapping does not save created hierarchy fields...
Can anyone help me on this?
Thanks in Advance
Stephane Naigeon

From XML, with fields "Category Name, Category Parent".
Then in MDM Map Tab, I clone the Field "Category Name" and create the Hierarchy Field with name "Categories", parent field "Category Parent", Child Field "Category Name", and Node name field "Category Name Clone".
Then I map the Split Hierarchy field with the destination field "Category Name [DF]", and the source field "Category Name" with the Remote Key.
The matching field in Match Record Tab is "Category Name [DF]".
I save then the mapping file but am not able to reuse it : as I said, the Hierarchy field disappears !

Profit centre field not visible while using Posting Key 15

Hi,
While using Tcode F-28 and Posting Key 15 profit cente field is not visible. I have checked following configuration. In OBC4 for Reconciliation account - additional account assignment - here the profit centre field is optional. Likewise I have checked OB41 for Posting key 15 - Profit centre field is optional.
Is there any other configuration to be done inorder to make the profit centre field visible.
Many thanks in advance
Regards
Narayanan

Dear,
SAP Standard System cannot provide PRCTR field for the screen for customer/vendor line
item although it is available if the line item is a G/L account. As a
general rule, the system assumes PRCTR to be filled by document split or
by running SAPF180 and AR/AP transfer depending on NewGL PCA or
classic PCA usage.
It was and still is not possible to enter PRCTR on vendor/
customer items.
One of the workarounds using the standard tools is to use field-to-
field substitution. You can enter the profit center in dummy field,
for example XREF1, and substitute the value entered in XREF1 into
PRCTR field.
I hope this can help You.
Mauri

Person or Group MetaData Field not saving

I have a document library with a custom content type
This DL has 2 Person or Group Meta Data Fields
I created a simple workflow so that the people on these 2 fields get notified when an item is created or modified.
However; for some reason, when I create a new document set of this content type
The person fields dont save any information
I can edit and reenter the info and it saves it but no workflow emails go out.
I am using Sharepoint Online on a E3 plan.
Please help
Thanks
Tanya

Hi,
I have done a test on my SharePoint online, I can’t reprocess your issue.
I added a custom content type in a document library which has 2 Person or Group Fields.
Then opened the document library with SharePoint Designer 2013, created an approval workflow as the following screenshot:
I selected that starting the workflow when an item is created or modified.
When I created or modified an item in the document library, the people on these 2 fields got emails
automatically.
For your issue, make sure the people have correct email addresses.
Please follow my method and test again.
Hope it helpful.
Best Regards,
Lisa Chen

AP workflow comments not saved after posting

dear
Ive posted it in controlling forum, but it had to be rather here.
I
when i check SAP AP workflow document overview id like to see comments entered by accountant as the reason for document parking. as soon as the document gets posted i see the approval and coding workflow path but comments are not saved any longer. do you know what might be a reason for that? why it happens? maybe it is related to specific settings for workflow?
workflow log for the posted docs is neither showing this information.
your advice much appreciated.
thank you very much!
regards
els

thank you for trying to help me.
Well, it looks this way: invoice is parked as PO document via workflow and send for approval - for different reasons (price difference, no GR, any PO found etc). Accountant while parking enters comment - to inform approver about the issue.
Sometimes the invoices bounces back already coded and ready for posting, sometimes is rejected - then we have 2nd comment as the reason for rejection. When finally invoice is ready for posting and is posted - these all comments (for parking, for posting) are disappearing. They are not saved in workflow overview history.
The posting might be done manually via workflow, automatically, or via tcode to post parked doc. But in anyway - comments are not saved. I am sure its possible to review invoice workflow history (if appicable) and see the issues identified for that invoice (audit purposes for instance). But I dont know how to check what should be set up for the workflow to have all these comments saved in workflow overview history (not long text, not WF log).
When i.e. you enter WF overview history you see name and action (park, reject etc) - when was clicking on that line it was seen below the screen the comment.
Thank you very much for your help!
regards
els

SGTXT field is not getting populated in 315 document

While placing stock in storage location through MIGO (movement 315) with reference to movenet 313 document, TEXT (SGTXT) field which is entered in 313 document is not getting populated from referred document.

Hi,
This is Standard SAP functionality.The Text does not get automatically populated from the referred document. You will have to use enhancement for the same. Use BADI - MB_MIGO_ITEM_BAdI

Visio 2010 - Shape Data Fields Are Not Saving

I am having a problem with a number of shape data fields which are not saving data that has been entered into it, whether by entering it through the "shape data" or "define shape data" dialog boxes, or by editing the "shape
sheet".
All data fields appear to save normally while file is open, it remains as entered. However, when file is closed and later reopened select data fields do not retaining data correctly. Some retain nothing (null), or revert back to a "default"
value, see below for a couple examples:
Rack Units: Want to enter data as 1U, 2U, etc. ... in some cases it will save it as entered while in other cases it reverts to "1 RU", "2U", etc.
Room: Enter the data as I want it stored, most of the time it appears to come back empty, there are some shapes which will retain as entered.
Comments: Fails to retain any data
I have looked at a number of reasons to explain why, whether the problems occur with stencils is supplied by Microsoft, a vendor, or were custom created. Looked into whether it might have to do with a particular vendor's stencils/drawings
but I have a number of Cisco drawings where some save those fields as entered while others do not. I believe it could be a setting within the stencil preventing it from saving the data as entered, enabled in some cases and not in others.
I have checked "Protection" under the "Developer" tab, but nothing appears to be set to prevent editing/storing data entered.
Is there some setting(s) or field(s) somewhere that I can look at to allow this data to be saved as entered?
Is there a GLOBAL setting that can be set once within a file?
Thank you in advance for your time to assist me in fixing these problems. Have a great day!
MJ_NWE
MJ

>Can I build logic so that they can't fill in a field unless the previous field has been filled in?
It's theoretically possible to do this (e.g. each field has an action
of removing read-only on the next). It's considered extremely bad form
design, because people don't always fill in fields in the order
specified. If you watch people with a form they fill in their name,
address, other easy stuff; then they go back for the harder stuff.
They may want to save a form because one piece of information needs
research.
What you might like to consider is a large splash "FORM INCOMPLETE" in
Red or whatever, which vanishes when all the fields are completed.
Aandi Inston

AET Generated field values are not saved.

Hi Gurus,
I have created two AET fields on the screen (marked below) and that should store values in table CRMD_CUSTOMER_H. When I create a new service request and enter the values and save, AET field values are not saved. Again, when I edit the same service request and enter the values and save , AET field values are saved on the database.
While debugging I found that, relationship BTHeaderCustExt does not exist for the first time and second time onward its appearing. Due to this, data is not being saved at first time (Line no 27 : current is empty).
When tried to create realtionship using create_related_entity , it throwing exception cx_crm_genil_model_error.
Please advice me the soution for the same.
Regards,
Anand

there should be a context node at your view level. Please check ON NEW FOCUS method is implemented or not.
If not, you can implement that method with below code.
    DATA: lv_collection TYPE REF TO if_bol_bo_col,
          entity        TYPE REF TO cl_crm_bol_entity.
*   get collection of dependent nodes
    entity ?= focus_bo.
    TRY.
        lv_collection = entity->get_related_entities(
               iv_relation_name = 'BTHeaderCustExt' ).
        IF lv_collection IS NOT BOUND or lv_collection->size( ) = 0.
          IF entity->is_changeable( ) = ABAP_TRUE.
            TRY.
                entity = entity->create_related_entity(
                 iv_relation_name = 'BTHeaderCustExt' ).
              CATCH cx_crm_genil_model_error cx_crm_genil_duplicate_rel.
*               should never happen
            ENDTRY.
            IF entity IS BOUND.
              CREATE OBJECT lv_collection TYPE cl_crm_bol_bo_col.
              lv_collection->add( entity ).
            ENDIF.
          ENDIF.
        ENDIF.
      CATCH cx_crm_genil_model_error.
*       should never happen
        EXIT.
      CATCH cx_sy_ref_is_initial.
    ENDTRY.
    me->set_collection( lv_collection ).

Text fields populated from lov mapping are not saved to database

Hi Everyone,
I'm having a wierd problem. My requirement is to autopopulate two text fields field 2 and field 3 when a value is selected from lov in field1 and save all the values to database on click of a submit button.
Using lov mapping i'm able to populate field 2 and field 3 with corresponding values based on the value selected in field1. And also field2 and field3 should be in the readonly mode so that user cannot change the value.
So to make the fields readonly i have changed the property of readonly to true for field2 and field3. But if I change the readonly property, the values for field2 and field3 are not being saved to database.
The values are getting saved to database only when readonly = true for messageTextInput item type or if the item type is a form value.
I also tried disable = true, which also didnt work.
I tried to debug by writing some sop statements in PFR, but these statements also returned null for pageContext.getParameter("field2") etc;
Can anyone please tell me how to solve this problem?
Thanks
Sunny

Hi Gyan,
I forgot to mention that , I also tried messageStyledText. Which also didn't work. I wanted to use vo.setAttribute as my last option, but i wanted to understand why the values are not saved to database when the text item is showing the values on the page.
Thanks
Sunny

The data is not saved in one of the LOV field

Hi all,
I have two forms in two different pages, both are pretty much identical, except here and there show/hide some of the field and different LOV values. One of the form is working fine, but other form is giving me trouble. There is an LOV in that form, giving and returning proper value. (I checked it with java script alert). But it is not saving in the database. I tried to upload the files to the OTN, but since i could not upload the whole application because of data complexity, I am not able to successfully upload that into the application. (But it is in the Export Repository). As far as I checked, I copied the working form page into not working form page and make the necessary changes. I did not change any property specifically to that field. Any idea what I should be looking into. Thanks.
Soe

Hi Andy,
Thank you very much for your response. I tried what you have suggested. But still it was not working. But what I found out was it is not displaying what I have selected after I press "Save". But it actually saved in the database. So, I kind of getting a little confuse and do more research why it is doing that. Finally I found out the problem is with the datatype. First form has two characters in the return value and this page has only one character. I used CHAR(2) as the datatype for that field and turned out it is appending space at the end since it has only one character. For that I do not see anything on the screen. I changed the datatype to VARCHAR2 and now the problem resolved. Thank you once again for your time.
Soe

Block UD saving, If stock posting is not done

Dear Experts,
My requirement is to block UD when a stock posting activity not completed. In standard setting, the system allows to save UD without stock posting completion.
Is there any customization is possible to do this activity?
So that, the system should not allow UD saving without stock posting completion.
VRMP.

Hi VRMP,
Gajesh is guiding you in 100% correct way. Status Profile will work for you exactly as per your requirement.
You will be in need to use the STD Profile "QM_L_001 - Inspection Lot Profile 1" will surely work for you. Herewith attaching some guiding links that are prepared to establish the control to prevent UD if RR is not done. Similarly look into for some business transaction that prevent UD before Stock posting.
[Thread - 1 |Re: User Profile created to block the UD, if RR is not done.]
[Thread - 2|Re: Result recording mandatory before UD]
[Thread - 3|Re: How to prevent UD when Result Recording is not carried out]
Or the at the other hand you can do it smarter way also.
Make the Posting proposal for UD code in Back ground in QS51 for each UD code. By doing this if the user will perform UD and save, system will; perform the Stock posting in background automatically.
Reagrds,
Shyamal

P.O change if i change only screen exit field the data is not saving

Hi ,
In the purchase order header custom tab i am added a screen exit field .In the purchase order creation mode the screen exit field is saving.But in the change mode if i am changing only the screen exit field then it is showing as 'no data to save' and not saving .But at the same time if i am changing some standard field with the screen exit field then both the field is saving.
I have to activate any field to save the screen exit field.Please let me know any exit to be activated for saving the data.
With Regards,
Ambrose

Hi
Pls keep a break-point in the PAI of Screen exit and check, whether it stops in change mode
Regards
Madhan D

SGTXT field not saved in UD posting doc

Similar Messages

Maybe you are looking for