Adapter for printer ??

Is there an adapter to hook up two computers to one printer

You might want to check this out:
http://www.shopping.hp.com/store/product/product_d​etail/Q6301A%2523B1H?
Let me know if that helps.
Please click on KUDOS if you find my solution helpful.

Similar Messages

  • Bluetooth adapter for printer

    My new Mac Mini is bluetooth ready. Is there a bluetooth adapter I can buy for my canon printer, MX850, so I can use it wirelessly?
    Thanks

    Typing 'canon mx850 bluetooth' into Google, brought me to the Information pages for your printer on Canon's website:
    http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=123&mo delid=16279#SNAModelSuppliesAct
    Scroll down and you'll see the "BU-30 Bluetooth Adapter"

  • Using USB 2.0 Network Ethernet Adapter for sharing printer with 3 computers

    Hi all,
    Opposed to using a print server, can I use a USB 2.0 Network Ethernet Adapter to connect my Epson printer over my ethernet DSL router?
    Thanks
    Web dude

    Yea, I thought about an adapter for the USB 2.0 port, but for a few bucks more, get the USB 3.0 adapter and be able to connect to Ethernet at Gigabit speeds!
    Since Lenovo has not commented on the absence of an Ethernet port, I'm guessing that the slim height of the Yoga prevents it, unless you go to some funky slide-out module and connect at a 90 degree angle (which would be a worse design).  I had an old Thinkpad (or Dell?) with that design, and they are intermittent and subject to being broken off.
    Bundling in the Ethernet Adapter would have been a nice touch.  Perhaps they were trying not to increase the Yoga's "above market" price further.

  • HP B500 Wireless Bluethooth Adapter for HP Printer Not Working With Windows 8.1

    I have been using the HP BT500 bluetooth Wireless adapter to print wirelessly to my HP Officejet Pro 8500 printer.  I have been using Windows Vista, but recently upgraded to Windows 8.1.  I learned after the upgrade that the HP B500 wireless bluetooth adapter is not compatable with Windows 8.1.  I have attempted to find a driver upgrade for the B500, but there does not appear to be one available.  I have also searched the HP site and other sites in an attempt to locate an alter wireless blotth adapter to replace the B500, but have again been unable to locate one. 
    Is there a wireless bluetooth apter that will allow me to print wirelessly to my HP Office Pro 8500 from my laptop?

    Hi @Raider83,
    Welcome to the HP Forums!
    I noticed that your HP B500 wireless bluetooth adapter for your HP Officejet 8500 is not working with Windows 8.1. I am sorry to hear this but happy to look into this for you!
    I am not sure if you are using a 32-bit or 64-bit Operating System. But sometimes with Windows 8.1 you can use compatibility mode to install an older version of the driver. Which might help the situation. Here is a link to some other Windows drivers, HP bt500 Bluetooth USB 2.0 Wireless Adapter Drivers.
    Once you got a driver downloaded, follow this guide, Make older programs compatible with this version of Windows, on how to install it using compatibility mode.  It is not guaranteed to work, but it is worth a try!
    If you still need me to look for other bluetooth adapters, please respond with your printer's Product/Model Number. To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As there are multiple HP Officejet 8500 printers.
    Thank you for posting, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Can I plug in my 110v iPad second gen. charger into 220v charger. I have an adapter for this outlet. Thanks!

    Can I plug in my 110v iPad second gen. charger into 220v charger. I have an adapter for this outlet. Thanks!

    FOr this and anything, read the fine print on the charger. It should say that it takes an input of 100 - 240v. That means all it needs is an adapter. If it doesn't have that number range then don't plug it in. (like stedman says, official apple chargers are rated for world wide power)

  • Creating an InDesign Portfolio for print, PDF, and the iPad | Adobe & You: Be Seen. Be Heard. Stand Out. | Adobe TV

    Discover how you can display your work in beautiful ways with Adobe InDesign CS6. Learn how to start creating a portfolio for print and prepare to adapt your portfolio for PDF, interactive PDF, and the iPad. Utilize the example portfolio assets to begin creating your own portfolio.
    http://adobe.ly/LjMNxs

    He says, a neutral grey is Set, When all 4 Values of c,m,y and k are the Same?
    Seriously?
    Embarassing Mistake in this Video. Has anybody from Adobe watched and cleared this? How in the World Couleur this Guy become adobe Certified whatever.
    For neutral grey you'd use the k value only.
    In RGB a neutral grey is Set with Same amount of r,g and be.
    Depending on your profiles and on the colours, a neutral gray in CMYK Would have more Cyan than Magenta and yellow.
    Just Take a neutral grey in RGB and let Photoshop change it to CMYK. And have a Look at the Result.

  • Using Presets for Printing Panoramas

    I have created a generic preset for printing panoramas on an Epson 4900 connected to a Mac with OS 10.8.4. Using the Epson printer driver's Page Setup via Lightroom 5, I reset the length of the panorama for each print and then update the Lightroom preset. Everything else in the preset is correct for my prints (paper, profiles, etc.).
    I have, however, periodically had the problem that even after resetting the print length in the driver and updating the generic panorama preset, that the print is the wrong length (either too long or too short) even though all indications are that everything is set correctly (see below). This can occur even if I shutdown and restart Lightroom (I have also had this problem in LR4).
    I would like to known how to correctly set up a panorama so paper is not wasted due to an incorrect length.
    The following items appear to be set correctly:
    (1) Printer Driver Page Setup paper size
    (2) The Lightroom Preset for the generic panorama (Both the print size and paper size. I looked at the text of the preset settings via TextEdit) I note that there is binary information at the bottom of the Lightroom preset. Is that being correctly updated?
    (3) The print display in Lightroom (the image correctly fills the print template which is of the correct size)
    (4) The print cell size in Lightroom is the size I have set in the printer driver
    The different sized panorams were printed on different days and the printer was turned off between those days. Cut sheet prints were also printed in between the panorams.
    One panorama was 8 feet long but it was truncated at 39 inches twice before it printed correctly (after I restarted Lightroom but not the printer). The other was correctly printed 58 inches long but on 8 feet of paper (which was blank after the image).
    I find it hard to believe the printer is remembering an old size (even after being powered off) but if Lightroom is not sending new information, I suppose that is possible.
    Allyn

    Hi Venu,
    Don't know about best-practice, but you can do this by using the file adapter, using the "Run Operating System Command" to execute a print command on the file.
    The file can be formatted in a mapping program.
    Regards,
    Bill

  • Is there an adapter For iPhone 5 to iPhone 4 Dock for audio?

    Is there an adapter For iPhone 5 to iPhone 4 Dock for audio?

    Yes from any Apple retail store .
    http://store.apple.com/uk/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=44 92b59061fe408f6d647cb573f35f474cab2c67a4…
    The cheap rip off copies usually do not pass audio (usually buried in the tiny print )

  • MacBookPro power adapter for UK and Europe

    I am going to be spending a semester in the UK and was wondering where I could find a adapter for my power cable.

    Apple sells a World Travel Adapter Kit for many countries, and a less expensive Kensington adapter kit. But you could also use any cheap UK plug adapter you find. You should make sure you have a grounded UK adapter as well as ungrounded.
    You only need a plug adapter. You don't need a transformer, because the MacBook Pro power supply is compatible from 100V (USA) all the way to 240V (Europe). It should say "100-240V" in the tiny print on your power supply.

  • HP Scanjet5500c dark images from TMA adapter for 35mm slides

    Scanned 35mm slides using the TMA adapter turn out very dark, not suitable for printing. So dark people in the images are identifiable.
    Should there be light showing from the TMA adapter in addition to the flatbed scanner? If so, that's my problem, a burned out bulb. Long time since I've used the TMA adapter so I can't recall if the adapter had a light when new.
    Looking forward to your responses.
    Thanks
    talker

    Hi there @talker2002 
    Welcome to the forums
    By your description, it does seem like a burnt out bulb. As HP does not replace the actual bulbs, I would suggest calling phone support directly to see what your options are.
    If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada,: click here.
    Best wishes,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I want to run a Firewire device, there is no port. Is there an adapter for that?

    II want to run a Firewire device, there is no port. Is there an adapter for that?

    If you DV7 has a slot that matches:
    http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&N=-1&isNodeId=1&Des...
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Wrong 'mini dvi to video' adapter for my 12" Powerbook 1.33

    I recently bought the M9319 mini dvi - video adapter for my 12" Powerbook 1.33 to find that the mini dvi on the adapter is a different size to the one on the computer and the adapters supplied with the computer.
    I've been doing a bit of research into this and it seems a bit of a grey area. Apple have not made it clear in advertising this product that it is only suitable for the newest 12" Powerbooks and even state that it will work with a 1.33 machine in their following article:
    http://docs.info.apple.com/article.html?artnum=86507
    Has anyone had a similar experience, or suggest an alternative product that will work? Did Apple make an older version that works with the 1.33?
    Any help would be much appreciated. Thanks, Graeme.

    Just took the adapter to my local Apple store and they identified it as a mini VGA to video adapter - not what it said on the packaging!
    I've noticed a few posts with this problem, so just double check before you leave the store that the packaging matches the product.

  • HT1349 mini graphics to vga adapter for macbook how to install in windows 7.

    mini graphics to vga adapter for macbook how to install in windows 7.
    i have macbook with windows 7 operating system.

    Can you be more specific?
    What are you trying to do?

  • Apple dvi to video adapter for macpro working?

    hallo,
    is it possible to use the adapter for the geforce 7300 in the macpro for pal video output? will it work? the apple store lists the adapter only for g5 and mini, but i see no reason, why it shoud not work with the gforce...
    any idea? thank you.
    thomas
    macpro   Mac OS X (10.4.7)  

    I have wondered about that G5 support since others have had bad luck with Nvidia boards and the video adapter. e.g. it doesn't work with the 7800GT, which is a G5 board. All current ATI cards on their web-site show support for it but the MacPro card is not on ATI's site.
    The adapter seems to have disappeared from the displays section of the Apple Store.
    Another option is a VGA to video adapter
    <http://www.ramelectronics.net/html/PC-TVvideoadapter.html>
    It costs more, but does a lot more, and should work with any video card.

  • HT3153 Can the early 2006 MAC mini support a DVI to hdmi adapter for TV monitor support?

    Can the early 2006 MAC Mini support a DVI to HDMI adapter for a TV Monitor?

    Hi, I can't see why not...
    Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
    http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html

Maybe you are looking for

  • After updating to 5.1 OS for 3rd gen iPod touch, no longer able to change wallpaper. Thoughts?

    When I click on wallpaper in my settings it shows the 2 current wallpapers. When I click on that to change them, it just sends me back to my home screen. As far as I can tell everything else is fine. Trying restarting the iPod and reseting the settin

  • Change of "Revenue posting" after the creation of an order

    Hi all, I would like to change the tick "Revenue posting" on the internal order level. There was a mistake in the setting while creating internal order type (I forgot to say "Revenue postings allowed" on the internal order type level). Since then man

  • Error in ABAP code

    Hi experts.. There is one one routine in BI which is written in ABAP.. When I try to compile that code.. it gives me following error : E:Field "/BI0/APP_O0100" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement

  • Browser Cookies

    I have just got a new Nokia 6210 Navigator, and when i go to view my msn hotmail account it comes back with the message that the browser need to be set to allow cookies on the unit. I have looked through the phone and it lookes like the cookies are s

  • My iPad won't show up on my laptop

    my iPad won't show up on my laptop, not even as an unknown device. And doesnt even make the sound on the iPad to show that its connected.... i need help